IMac keep ejecting my 2TB external HDD but in safe boot mode it is totally fine. How to resolve the problem?

Hi,
I have WD 2 TB external HDD. It has two partitions, one I use for my time machiine backup and one for my personal files and documents. Recently the iMac keeps ejecting the external HDD as soon as it gets connected to the iMac. I tried to reboot the computer in safe boot mode (by holding down the shift key at startup) and found out that problem is not there anymore. I can access my external HDD there and it never ejects the HDD.
It seems like the HDD is fine, the problem is with the iMac. Can anybody please give any solution to this problem?
Thanks!

Thanks Allan for your reply!
It makes sence that there must be some log in /start up item which is causing this problem. I went System Preference>Users & Groups> Login items> disabled all the items there to make sure, and restarted the computer but the problem is still there
Is there any other way to stop/configure the log in items?
Thanks again!

Similar Messages

  • I have recently purchased the highest storage but was unable to backup my phone via icloud, the button on my mphone to backup on icloud is grey out, anyone knows how to resolve the problem?  What's the point of purchasing the biggest storage?

    i have recently purchased the highest storage but was unable to backup my phone via icloud, the button on my iphone to backup on icloud is grey out, anyone knows how to resolve the problem?  What's the point of purchasing the biggest storage?

    First check that your device is correctly connected to the wifi/internet (settings > wifi)
    If your back up continually fails, you might try turning off back up on your mobile device (settings > iCloud > storage & backup) and then deleting the backup file from iCloud by swiping the backup file on the mobile device (settings > iCloud > storage & backup > manage…) and then turning back up on again.
    If this doesn't help, try turning off some items for back up in a pattern to try to establish if your problem is being caused by specific data on your device.
    Being able to back up to the cloud can be very useful, especially if you don't have access to a computer or have infrequent access to one, however unless you specifically need to use iCloud for back up, you will find backing up to iTunes significantly more convenient and possibly more reliable.
    More about iCloud v iTunes Back Up

  • I installed OSX server 10.6 snow leopard on my IMAC, but still have choppy videos. can anyone tell me how to fix the problem

    I installed OSX server 10.6 snow leopard on my IMAC, but still have choppy videos. can anyone tell me how to fix the problem

    By your use of "still", did this problem exist before OS X Server was installed?  OS X Server itself has no particular linkages to video processing, beyond what OS X client provides.
    Some details on the configuration might be useful.  Are these videos you're having issues with stored locally in files, or are these videos received over the network and played?  If the videos are local, have you tried playing the videos from a different disk?  If the video files are remote, can you download the videos and play them as a test?
    What software are you using to play the videos?  QuickTime?  QuickTime X?  Does using VLC or another player work better?  There are some discussions of choppy videos around the forums, too.

  • The latest update has resulted in a runtime error (R6034) and I keep being told Microsoft Visual C   Runtime Library is being accessed incorrectly.  Anyone know how to overcome the problem?  I am using a Dell Inspiron  9400 running Vista.

    The latest update to itunes has resulted in a whole series of runtime errors (R6034).  Microsoft Visual C++ Runtime Library states it is being accessed incorrectly.  I am also told that Apple Mobile Device Failed to Start.  Additional messages suggest the error is in itunes.exe and ituneshelper.exe.  I also get Error 7 (Windows error 1114).  Anyone got any ideas how to overcome this (these) problems?

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (99527)

  • Can I store the apps in my iTunes library on an external hdd but keep my music on my mac

    can I store the apps in my iTunes library on an external hdd but keep my music on my mac?
    thanks

    I don't know if this is me adding files to iTunes when the external wasn't connected
    it is.
    is it OK to just keep deleting that library on the Air?
    i wouldn't - at least not until i
    mount the external
    point iTunes media folder location back to the external via preferences > advanced
    consolidate my library via file > library > organize library
    The ntfs hasn't seem to be causing any problems, but I've always wanted to know.
    in order for your Mac to write to NTFS drives, it needs some help by installing e.g. the NTFS 3G driver. apparently that or something similar is installed on your Mac already. preferably, it would be formatted for Mac but then windows machines would need to have e.g. MacDrive installed to recognize the drive.

  • My imac keeps ejecting discs and wont read them

    my imac keeps ejecting discs and wont read them

    I did not ask for the full serial number.  Anyway, you are the 7th week of 2008, unlikely that is a PRAM battery issue.
    Since your machine isn't under warranty, I'd try a CD cleaner that supports car stereos, like this one from Radio Shack online, but only if Apple Authorized service technician says it is safe:
    http://www.radioshack.com/index.jsp?productId=2361963
    This being a user to user forum, I can't say if it is or isn't.
    Or you can buy a supported external optical drive, like the various ones from http://www.macsales.com/
    Internal optical drive replacement is complicated, and possibly covered on http://www.ifixit.com/

  • Add Seagate 2TB External HDD to Oracle VM  /OVS

    Hello guys,
    I have got a empty Seagate 2TB External HDD with NTFS partition And I want to add this as addition storage to my Oracle VM Server in OVS partition.
    Also this 2TB USB HDD is solely dedicated to Oracle VM so I am not bothering about Any other operating systems.
    To accomplish my this purpose I have gone through so many online forum to convert Seagate ntfs partition to Linux partition. But I couldn't find success.
    So Here my questions are :
    1) Is it possible to convert USB HDD ntfs partition to Oracle VM Server supported partition that can run VM Machine on it ?
    2) If Answer is Yes, then Could you explain me how do I do that ?
    Many Thanks
    Hemesh

    Hi Herbert,
    Thanks for your reply,
    So it means I have to create OCFS2 file system on external Hard drive.
    Thanks
    Hemesh.

  • HP HD3200 2tb external hdd reformatting itself

    I bought the HP HD3200 2tb external hdd just about a year ago and it has worked famously until very recently. Starting about a week ago the drive would randomly stop being read by my computer and after going into disk management the space on the drive has somehow transformed into unallocated.  The only option I have at that point is to reformat the drive and start over.  On top of that if I reformat the drive I then have to run a test disk to adjust the aprtition table otherwise it becomes formatted but simply does not show up in the browser.  This has happened 3 times now and I would like to find a permanent solution before I lose something I can't replace.  Any thoughts on why this has started to happen or how i might fix it would be greatly appreciated.

    Take the drive to a Windows PC and install Data Rescue ($100) and let it work on reading the 1's and 0's of the files themselves, outputing the recovered files to another large external hard drive (formatted exFaT on the PC, not on the Mac and not NTFS!)
    This is going to take hours to complete, so buy the software upfront and get it over with.
    Once it's finished you can hook up the drive to the Mac and it will read it, no NTFS reading/writing software required.
    If the PC your using is a Windows XP machine and there is no exFAT, then install the free exFAT for XP from Microsoft first.
    Take a second to learn about drives and formatting, it's not wise to use NTFS software as you see now the problem.
    Drives, partitions, formatting w/Mac's + PC's

  • My imac keeps ejecting cds (new ones). Fixes anyone?

    My imac keeps ejecting cds (new ones). Fixes anyone?

    Check Finder > Preferences > General
    Make sure CDs, DVDs, & iPod is selected.
    And check your settings in System Preferences > CDx & DVDs

  • My imac keeps ejecting my discs, wont burn anything either

    my imac keeps ejecting my discs, wont burn anything either

    Are these CDs? DVDs? or both?
    Have you tried using a different brand of disks? Some work better than others.
    Does it eject all disks or only some? Only blank disks or some that have already been made? Commercial disks or burned?

  • My imac keeps losing ISP, INTERNET AND SERVER but still has WIFi

    my iMac keeps losing ISP, INTERNET and SEVER but is still connected to the Wi-Fi and when I tern on the mac i have to connect it every time and it is on preferred net work its the Olney one then after I connect it works for about 20 min then stops and I got to network preferences and click on ASSIST ME - DIAGONSTICS and it shows ISP INTERNET AND SEVER ALL IN YELLOW.

    Open System Preferences Network pane.  In the sidebar, if you see things you do not use for networking, remove them (you can add them back later if they are ever needed).  For example, if you don't use Bluetooth or FireWire for networking, remove them from the list of networking services.  To do this, select the item on the list and click the minus sign at the bottom of the sidebar.  You can leave Ethernet on the list.
    NOTE:  Bluetooth and FireWire networking is not related to their use for connecting devices.
    Also, click on the gear icon at the bottom of the sidebar, and select Set Service Order.  Make sure Wi-Fi (or AirPort for older Mac OS X) is at the top of the list.
    Apply the change (and maybe restart your Mac as well).  See if that makes any difference.

  • IMac keeps losing ISP, internet and Server but still connected to wifi

    My Imac keeps losing ISP, Internet, and Server but is still connected to the Wifi. To recnnect, I have to go into Netwrok Diagnostics - assist me. This is happening every twenty minutes or so (sometimes less). Can anyone help? I might add that we have recently moved house and never had this problem before.

    Wifi problems seem to crop up a lot on here and unfortunately there doesn't seem to be a 'one fix' solution.
    However, sometimes any one of the following can help although, unfortunately, not always. In no particular order:
    Check wifi security - if it's WEP change it to WPA or WPA2 (preferably, as it's more secure)
    Change the wifi channel on the router
    Create a new Network Location: http://support.apple.com/kb/HT5289
    Reboot the router
    Also take a look at this link and the links within the article for other ideas. They mainly reference Lion, but still seem to be relevant to Mountain Lion:
    http://osxdaily.com/2011/11/06/lion-wi-fi-problems-solution-mac/?utm_source=feed burner&utm_medium=feed&utm_campaign=Feed%3A+osxdaily+%28OS+X+Daily%29&utm_conte n t=FaceBook
    ...and this link:
    http://osxdaily.com/2012/11/30/resolving-stubborn-wi-fi-connection-problems-in-m ac-os-x/

  • My superdrive failed on my imac so i purchased an external superdrive but my imac doesnt recognise it. any reason?

    My superdrive failed on my imac so i purchased an external superdrive but my imac doesnt recognise it. any reason?

    You have given us zero information to go on:
    What Mac with what version of OS X?
    What external Superdrive and how is it connected to the Mac?

  • I created a website with iWeb but use GoDady for hosting it rather than MobileMe. The images on my Gallery page do not show at all on the external domain but they DO show when seen on MobileMe. Has anyone encountered this problem before? Many thanks!

    Hello al!
    I created a website with iWeb but use GoDady for hosting it rather than MobileMe. The images on my Gallery page do not show at all on the external domain but they DO show when seen on MobileMe. Has anyone encountered this problem before? Many thanks!

    Just create a new page (or use the existing photo page) on your external site and use html to add an iframe sized to the page and link it to the mobilme gallery page. Works for me just fine when showing my gallery from a yahoo site.
    like this
    <iframe scrolling="off" allowTransparency="true" frameborder="0" scrolling="yes" style="width:100%;height:100%;border:none" src="http://gallery.me.com/your_account_name"></iframe>

  • TS4003 Since the MobileMe move I keep getting a screen that says "IDisk Conflict Resolver." I've done everything asked to "resolve" the problem but it keeps popping up every few minutes. How can I get rid of this?

    Since the MobileMe move I keep getting a pop-up screen that says "IDisk Conflict Resolver." I've done everything asked to "resolve" the problem but it keeps popping up every few minutes. How can I get rid of this?

    Ok....so I have found a work around....if not a complete solution.
    I'm not sure if deleting your music, uninstalling ITunes and reinstalling and adding your music back will actually affect it but I tried it again. Started from scratch.
    I checked the box for "Manually manage music and videos"
    Then I moved my music to phone via drag and drop, usually just boxing a row of albums at a time.
    I went back into my Iphone and began the sync. The message popped up, "1 Item could not be synced" and the sync stopped. At that point, I just clicked sync again and it started back up again. It took a few go's but eventually I got all my music on my phone.
    Ironically enough, the only songs that wouldn't sync were songs that I had actually purchased from Itunes....kinda odd

Maybe you are looking for

  • Amount of Undos

    Hello... I want to know if there's any way to increase the amount of undos I can make in Illustrator CS5. Thanks in advance.

  • Hwo to make this effect in flash

    SO i know in after effect i can make this but i dont have the program and this is for a flash intro... Lets say I have a ball in motion and I was a line trailing behind it like a ball has been kick and it is flying through the air how can i make the

  • Start up and shut down is slow after erasing free space using disk utility?

    I went to Disk Utility, clicked Erase, and then "Erase Free Space." When I saw that it was going to take 1 hour and 30 minutes, I tried closing disk utility. It wouldn't let me exit, so instead I pressed "Skip." But when you hover over the "Skip" but

  • HT201406 Ipod touch 5th generation front camera not working?

    Ive had my ipod for at least 3-4 months now, and just today my front camera stopped working! I go to my camera app, (the built in one) and it defaults to the back camera. when I tap the little switch icon, I get a blurry, and sometimes black, screen.

  • Methods Vs FM

    Hi Gurus, Please clarify my query. I have been using some of the methods in Objects (can also be done by using Functional Modules). For an effective OO programming , the usage of functional modules are acceptable or not? Thanks