IMac keeps ejecting DvDS/CDs

Hi,  I have a Imac which won't accept any disc's. Once the disc is in the Imac tries to read but sounds like its failing to read, then its ejected
Please Help??
thanks in Advance
IMac - 10.5.8 / 2GHz / 1GB

If you have not done any troubleshooting then reset the SMC and PRAM first. Try these 2-3 times and if there no change in behavior then go to your local office supply store and get a CD/DVD cleaning kit and use it on your SuperDrive.
If you have never done the resets mentioned above, please use iMac SMC and PRAM reset for instructions.

Similar Messages

  • My imac keeps ejecting cds (new ones). Fixes anyone?

    My imac keeps ejecting cds (new ones). Fixes anyone?

    Check Finder > Preferences > General
    Make sure CDs, DVDs, & iPod is selected.
    And check your settings in System Preferences > CDx & DVDs

  • My imac keeps ejecting my discs, wont burn anything either

    my imac keeps ejecting my discs, wont burn anything either

    Are these CDs? DVDs? or both?
    Have you tried using a different brand of disks? Some work better than others.
    Does it eject all disks or only some? Only blank disks or some that have already been made? Commercial disks or burned?

  • IMac keep ejecting my 2TB external HDD but in safe boot mode it is totally fine. How to resolve the problem?

    Hi,
    I have WD 2 TB external HDD. It has two partitions, one I use for my time machiine backup and one for my personal files and documents. Recently the iMac keeps ejecting the external HDD as soon as it gets connected to the iMac. I tried to reboot the computer in safe boot mode (by holding down the shift key at startup) and found out that problem is not there anymore. I can access my external HDD there and it never ejects the HDD.
    It seems like the HDD is fine, the problem is with the iMac. Can anybody please give any solution to this problem?
    Thanks!

    Thanks Allan for your reply!
    It makes sence that there must be some log in /start up item which is causing this problem. I went System Preference>Users & Groups> Login items> disabled all the items there to make sure, and restarted the computer but the problem is still there
    Is there any other way to stop/configure the log in items?
    Thanks again!

  • Help, DVD Driver keeps ejecting DVD and requesting a Blank, I insert a Blank and the same message keeps coming up, any suggestions ?

    DVD Driver keeps ejecting DVD and requesting a Blank, I insert a Blank and the same message keeps coming up, any suggestions ?

    Hi
    a. You are using Cheap media as Memorex, NoName etc DVDs - I only use Verbatim
    b. You use a DL-DVD or DVD+/-RW type of media - Old Macs can not use DL-DVDs - I only use DVD-R
    c. Your DVD-burner needs a cleaning - Cleaning DVD without liquid but the brush type
    d. Is there OK free space on Your Start-Up (Macintosh HD) hard disk - I never go less than 25Gb free.
    e. Can You describe the material used to create Your DVD
    - Video Codec/s
    - Photo file formats
    - Audio file formats
    iDVD can not use all but only a few of them - still it tries and then often fails
    Just to start by.
    Yours Bengt W

  • My imac keeps ejecting discs and wont read them

    my imac keeps ejecting discs and wont read them

    I did not ask for the full serial number.  Anyway, you are the 7th week of 2008, unlikely that is a PRAM battery issue.
    Since your machine isn't under warranty, I'd try a CD cleaner that supports car stereos, like this one from Radio Shack online, but only if Apple Authorized service technician says it is safe:
    http://www.radioshack.com/index.jsp?productId=2361963
    This being a user to user forum, I can't say if it is or isn't.
    Or you can buy a supported external optical drive, like the various ones from http://www.macsales.com/
    Internal optical drive replacement is complicated, and possibly covered on http://www.ifixit.com/

  • Internal and External DVD players keep ejecting DVDs

    i have a G4 500mhz AGP mac (upgraded to a 1.6ghz processor via a NewerTech card) with an internal CD/DVD player (not burner) and i have an external LaCie CD/DVD burner (the LaCie CD/DVD burner is only about 4 weeks old and i've burned maybe 8 to 10 DVDs on it)
    i have had NO problem reading any DVD disks until just about a week ago.. i had bought a new Graphics DVD and it worked the first time i put it in the DVD player... the second time it would not work... (((this was the start of the problem of the purple-ish DVDs not mounting))) so, i thought i had just bought a faulty DVD, they replaced it and the new one still will not work at all.. the DVD will NOT work in my internal DVD player AND it will not work in my LaCie external DVD burner/player...
    the internal drive just spins for a few minutes and the kicks the DVD out... the external LaCie drive spins for several minutes, then i finally get a message saying the disc is not readable.
    what i have noticed is that any DVDs i put in will mount as long as they have a silver surface.... if the surface is purple-ish color, those are the DVDs that will not mount and keep ejecting
    even DVDs that i have burned on the external LaCie DVD burner will not mount in the internal drive OR the external drive...
    as i said, all of the DVDs that will NOT mount are the one's with a purple-ish surface... maybe that has something to do with the problem....
    something must have happened somewhere because these purple-ish DVDs did used to work... i even did a brand new install of OS X.4 on a totally seperate hard drive and these purple-ish DVDs STILL would not work...
    even booted into MacOS 9.2.2 and the STILL would NOT mount....
    ANY info would be helpful...

    i now KNOW that there is NOT a defect with the LaCie DVD/CD burner and there is not a problem with the purple-ish DVDs, but it is HAS TO BE something with the Mac or MacOS X software because i took the LaCie drive and connected it to my WindowsXP machine and ALL the purple-ish DVDs that would not mount on my mac computer WILL WORK on with the LaCie drive connected to my XP machine...
    any suggestions are appreciated.....

  • Keeps ejecting DVD-R

    I'm trying to burn a project on iDVD 6 and it keeps ejecting the disc when I try and burn it. Keeps saying "No disc is in the drive. Insert a recordable DVD disc" Any help would be gread.

    make sure that when iDVD asks you for the black DVD you press the Eject Button on the keyboard instead of pushing the drive door for it to close...I ran into this problem before. For some reason the computer doesn't like when you push the optical drive door instead of pressing eject button
    let us know how you do.

  • IMac keeps ejecting a DVD.

    Every time I insert a DVD into my iMac it gets ejected. Any suggestions?

    While you don't say which model iMac, OS X, or other configuration info, there are several items that may give you some ideas that came up with search terms:
    • 'Mac OS X all DVD discs rejected'
    https://www.google.com/#q=Mac+OS+X+all+DVD+discs+rejected
    There are a few items including ones from Apple support community discussions and elsewhere. In some older hardware there may be a few resets or startup keyboard combinations that could help, depending on if the real issue is in the DVD player or some other issue in firmware or software with the computer itself, which may require troubleshooting.
    Hopefully this helps somewhat.
    Good luck & happy computing!

  • SuperDrive on iMac Keeps Ejecting Discs

    I've been having trouble with my early 2009 iMac's SuperDrive.  Recently I'd been having trouble reinstalling a 3rd party app after ML upgrade, and the install CD was getting stuck.  I did have to pop it out manually using a card to gently make it come out.  Now the drive will only eject every disc I try to insert.  Is the drive toast, or is there a way to koax the drive to take discs again without having to open the iMac?  It's obviouosly out of AppleCare, so if I have to replace the SD, what should I get, and how much can I expect it to be to get someone to install it?  This has been one **** of a computer and I want to keep everything on it running right, even with its age.  I just need it to last about 2 more years, then I will be looking to upgrade.  Also as an aside, will the external SuperDrive work on this kind of iMac?  I know it's meant for use with the MBA and other notebooks, but I am curious if that could be an option for me in this situation.  Thanks!

    I can't find any specific info...
    Apple reports that the slot-loading 8X "SuperDrive" with 4X double-layer burning (DVD+R DL/DVD±RW/CD-RW) "writes DVD+R DL discs at up to 4x speed, writes DVD-R and DVD+R discs at up to 8x speed, writes DVD-RW at up to 6x and DVD+RW discs at up to 8x speed, reads DVDs at up to 8x speed, writes CD-R discs at up to 24x speed, writes CD-RW discs at up to 16x speed, [and] reads CDs at up to 24x speed."
    http://www.everymac.com/systems/apple/imac/specs/imac-core-2-duo-2.66-20-inch-al uminum-early-2009-specs.html
    I think the matching the SATA speed is the most important factor.

  • DVD tray keeps ejecting DVD disc

    Hi!
    Recently my eMac has stopped playing DVDs or any music CDs. When I close the tray with a DVD or a CD, it keeps closed for about 10 seconds and ejects. I have done basic troubleshooting like restarting and using the eject/close button on the keyboard but no luck so far. I am a newbie in apple/eMac do not have any clue what could I do.
    Your answer will greatly be appreciated.
    Thanks in advance!
    Nirmal

    Hi nirmal
    What are the instructions set to do in System Preferences > CDs & DVDs
    when a CD or DVD is inserted?
    In Applications > Utilities find and open Disk Utilities
    Run Repair Permissions.
    Of course there is the possibilty that the unit is 'broken' but try those two things first.
    regards roam

  • Imac keeps ejecting when booting up

    Dont have problems with the super drive in other cases. It works fine, burns fine, copies fine, plays fine...
    but everytime i need to run something from the disc doing boot up(like the leopard install disc or the vista install disc for boot camp) it just ejects them!
    and when i push options button, and get to the OS selection screen, the Imac still pushes out the DVD... And when i put it back in the DVD is displayed as an efi file. I dont know what that is!
    when the machine has booted up, it displays and reads and writes all the CDs and DVDs just fine, so its something doing boot up!
    is it possible to change something in bios? its probably some stupid little setting i cant figure out.
    My Imac is a month old. its the newest high end model. Could really use the help!

    I'm experiencing the same thing on a MacBook Early 2008. I used Boot Camp to create the partition and started the process of installing Windows XP. The disc, however, is ejected on boot. Always. I've tried with 2 discs and still happens. If i boot pressing the Option key i can insert the disc and it will be recognized, but i can't boot from it. Something weird is happening.

  • 2010 mini keeps ejecting DVD's

    Hi Guys, seem to be having a weird problem. My 2010 mini is self ejecting blank DVD's that I insert into it. It spins for a few seconds then just pops out! I have tried two brands and no luck. It seems fine with blank CD's though! Any ideas?
    Additional info: I have followed the guide for resetting the PRAM and the NVRAM, with no change to the situation.

    The optical drives do go bad sometimes, and there are separate lasers for DVDs and CDs, which could explain why your CDs play.
    You could just replace the drive (about $100USD for a raw drive, IIRC), or perhaps give another try at cleaning. I have heard that another cleaning technique is to fold some thin fuzzy cloth over a credit card, and plunge it into the drive slot, in an attempt to catch any debris.

  • Imac 27" ejects DVD+R

    Hi,
    I have been having this issue for a few days now. I am using Sony DVD+R disks to burn and every time I insert any of the blank's, the imac ejects them. Tried the same disks on my macbook air with the external drive and it works fine.
    Both macs are using osx v10.6.5. I've tried re-booting the machine, and the results are the same.
    I'm really dissapointed given the list of growing issues I've had with this 2k machine, and I really don't like saying this but of all the cheap-o and diy pc's I've put together and owned for the past 10 years, I've yet to have anything like this ever come up. A dead PSU on occasion, and that's it.
    Dreading having to call applecare and drive this brick to the store to have it looked at.

    This is happening with all DVD media, cd, cd-r, even the OSX disk, all being ejected. I hardly use this rig and every time I have, it's always had an issue

  • Powerbook keeps ejecting DVD's

    9 out of 10 times whenever i insert a DVD into my Powerbook it makes some noises like trying to read and after about 15 to 20 seconds it ejects.
    The few times it actually manages to run the dvd playback is not so good like random skipping and then eventually stops.
    Audio CD's seem ok.
    I tried a DVD cleaner disc but it didnt help much.
    Any suggestions

    The optical drives do go bad sometimes, and there are separate lasers for DVDs and CDs, which could explain why your CDs play.
    You could just replace the drive (about $100USD for a raw drive, IIRC), or perhaps give another try at cleaning. I have heard that another cleaning technique is to fold some thin fuzzy cloth over a credit card, and plunge it into the drive slot, in an attempt to catch any debris.

Maybe you are looking for

  • Deprecated put.value get_value

    Moving to Jdeveloper 3.2 I get a warning about the put_value and get_value function are depercated but I didn't find any information about. Any suggestion ? TIA Tullio

  • R/3 Extraction steps Sreen shots in BI7.0

    Hi Friends I am New to sap BI ,I learnt BW 3.5 recently ,If any body have Screen shots of R/3 extraction,Could you Please send me to my MAIL ID [email protected] *Lo Cockpit* *FISL* *COPA* and *Flat File* Thanks in advance Ajju

  • What are the different "Setup tables" in OF?

    Hi all, what are the different "Setup tables" in OF? SOMASI

  • BADI for COVGR Feature.

    We have a requirement that coverage for certain insurance plan should be based on number of dependents. Tried following options: (1) Enhance Feature - COVGR using "program option". This didl not work because PERNR or any other employee attribute whic

  • VMI  EDI or XML to exchange data

    Hi Gurus, We are in process of setting up VMI  with one of  our bigest customer. We are working on SCM5.0  and ECC6. But customer has  non R/3 system and already have EDI infrastructure. This VMI implementation using APO ( that is  Customer system ->