IMac keyboard connection

iMac randomly looses connection with wireless keyboard/mouse and can't reconnect? Any ideas?

In australia, its $30AUD for a 6 pack including the charger. Couldnt see it being much more anywhere else. Hope this helps

Similar Messages

Can I connect my iPad2 to iMac keyboard?

I turned on the iPad's Bluetooth and it will not see the iMac keyboard. Can it be connected and if so how?

As long as your IMac keyboard is Bluetooth enabled it will work. I have read some posts in this community that it might take a couple of attempts. Try and put your iPad and keyboard close together maybe this will help.

Using the new imac keyboard on the macbook pro

is there a software update that allows the use of the new features of the imac keyboard when hooked up to a Macbook pro (core2duo) It would be great if the screen brightness, dashboard keys, etc would function as they are labeled.

I suppose you're thinking of the 27" iMac that might be used as an ext screen and/or the 24" LED.
Both come with a MiniDisplayPort input - that will work with current MBpros. If you want to connect an older MacBookPro with only a DVI connector you'll need an additional DVI to MiniDP converter.
Such animals exist and cost approx 100 Euro like this one: http://www.atlona.com/Atlona-DVI-to-Mini-DisplayPort-Converter-p-17859.html
tot ziens

Is it possible that iMac corrupts connected external hdd-s drive via USB?

Is it possible that iMac corrupts connected external hdd-s drive via USB? (two wd cav. green 2tb from different purchase went down in one day, both from the backside usb ports)
First one of my video storage hdd, full of files suddenly got extremely slow, and a few minutes later, it unmounted itself, but with the unmount error, but nobody even touched the cables, electricity etc. When I tried to mount it again, it did not respond, just give a periodical load light and ticking. First I thought it must be hardware failure, but since I bought a brand new drive today and it made the same problem as soon as I tried to format it. I got suspicious. The consol, said about these - i googled all but now solution so far. (WesternFresh is my drive)
Oct 23 17:10:58 xxxx fseventsd[47]: disk logger: failed to open output file /Volumes/WesternFresh/.fseventsd/636573acca1d6550 (No such file or directory). mount point /Volumes/WesternFresh/.fseventsd
Oct 24 10:55:42 xxxx com.apple.kextd[10]: Can't create kext cache under / - owner not root.
Oct 24 17:23:05 tmdc diskarbitrationd[16]: unable to probe /dev/disk1 (status code 0xFFFFFFFA).
and there was an I/O faliure not but it was on another mac - where i hoped itt will come back to live.
I think - if it is possible - that the OS maybe misunderstand something about these drives, and try to change - maybe permissions - all the time if a usb external connects...? (I am not really into it as you see )
Also about Disk Utility - it does not see any partition on the old hdd, but i shows the name of the product. If I connect the new hdd via the keyboard usb, the disk utility is able to see and format it, but the hdd will be still slow and tikking after it.
Also I tried Disk Warrior (freezd out) and Techtool Pro 6 thanks to some ol'frineds - which also not saw the old hdd, but did nothing useful with the new one.
About cav green: I have 3 of them and no error so far, and got 4 1tb cav green in 2 mybook studio II also without any problem.
Iam a bit scared, and try not to plug in any usb hdd-s now, but I have to continue work, so I need solutions.
I hope if it is not hardware failure, maybe some tricky terminal code will bring back the viability of my old hdd - and I won't have to spend a lot of money to recover data.
strange.
if anybody has a clue?
update 1:
i found this post also:
https://discussions.apple.com/message/15905481#15905481
I also made the mentioned steps - but it is a bit different sice it reproduce itself and I cant use DU.

It turned out that WD is the big bad guy in this game.
According the data rescue company where I asked for an inspection, both of the drives had their reader head loose. And in the one, which was my already-in-use disk its even damaged the platters... xxxxx
So its time to pay bunch of money to recover, and take a walk to wd service to bang on the desk.
Also note - it may be somehow related to intellispeed technology - since macs not really friendly with wd-s built-in solutions.
On the other hand, with WD GP 1Tb there is no problems at all for ages.
thanks guys, thread is closed

IMac keyboard conflict with iPad

When I connect my iPad to back of the iMac, my keyboard ceases to function. When I checked the system profiler, i noticed that everytime i plug in the iPad, the apple keyboard connected to a USB high speed gets replaced by the iPad. The keyboard could no longer be detected. How can i fix this?

I had many errors trying to sync to my PC (xp) and found out that the problem was that the computer daylight savings option was disabled. Just enable it and restart iTunes, then connect the iPad without sync errors.
Cheers!

When I had a PC I simply took the wire going to my monitor and connected to my big screen TV to watch Netflix movies...How do I take them from my IMAC and connect them to my TV now?

When I had a PC I simply took the wire going to my monitor and connected to my big screen TV to watch Netflix movies...How do I take them from my IMAC and connect them to my TV now?

This could be problematic.
It will depend on what model of iMac you have.
You may want to post machine info.
blue apple > about this mac > more info button. Click on the hardware line. It has a little triangle in front of the work hardware.
Leave out the serial number.
Example:
Machine Name: iMac
Machine Model: PowerMac4,1
CPU Type: PowerPC 750 (33.11)
Number Of CPUs: 1
CPU Speed: 600 MHz
L2 Cache (per CPU): 256 KB
Memory: 768 MB
Bus Speed: 100 MHz
Boot ROM Version: 4.1.9f1
Most of the iMac's have sometype of video output port on the back. You will problably need a converter.
The 'hollywood' industry has been making it more difficult to get video out over time to prevent copying.
Robert

My iMac is connected to a Brother printer. I have Snow Leopard 10.7.3 As of yesterday, when I try to print a PDF it prints as a blank black page. Does anyone know how to correct this so that the PDF will print as I see it on screen?

My iMac is connected to a Brother printer. I have Snow Leopard 10.7.3 As of yesterday, when I try to print a PDF it prints as a blank black page. Does anyone know how to correct this so that the PDF will print as I see it on screen?

If you are running Mac OS X 10.7.3 then you have Lion installed, not Snow Leopard. It's probably not important to this discussion, but something you should be aware of.
What application are you printing the PDF files from? Have you tried opening the PDF file using the Preview application that can be found in the Applications folder? Does the issue still occur? Have you tried other PDF files from a different source?
Another poster in the following discussion thread reported that this method resolved their black blank PDF issue when viewing (and presumably printing) PDF files from Safari.
https://discussions.apple.com/thread/3890509?start=0&tstart=0
This solved my question by mcbuffy on Apr 20, 2012 11:29 AM
There's a solution if you want to see the PDF inside Safari's window :
Go to the folder : Your Hard Drive / Library / Internet Plug-ins.
If you see a file with PDF in its name drag it to the trash.
Quit and restart Safari to test with a PDF.
If it works you can empty the trash.

TS3276 Web through this step-by-step, but alas it did not solve the problem. For some reason I can download mail on my Macbook Pro, but no my iMac. Connection Doctor shows all green lights.

Went through this step-by-step, but alas it did not solve the problem. For some reason I can download mail on my Macbook Pro and iPhone, but no my iMac. Connection Doctor shows all green lights. This started today when I was prompted to re-enter incoming mail server passwords. I re-entered passowrds yet again to make sure they were correct. Rebuilt the inBox. Connection Doctor continues to show all green lights, but am still unable to download mail to the inbox. Has anyone else ever run into this problem?

I have the exact same problem trying to use the Remote app on both my iPhone 3gs and iPad 2 with either my Mac or ATV2. My Remote app used to work on my phone - I can't recall if I ever actually used it with my iPad, but when I tried today, I got all the same results as you did (on both iPad, and then iPhone). I was using my ATV2 to play music from iTunes on my Mac and wanted to use the Remote app, but it would not connect to either device no matter what I did.

New iMac will connect to Airport but not Internet

I've just bought an Intel iMac 2.94ghz, brought it home and tried to get it onto the internet.
It sees my wireless network and connects just fine, with all bars full. But if I try to view a page in Safari, I get the 'You are not connect to the Inernet' page. I've tried restarting, turning wireless on and off, restarting my router, restarting, reseting and updating the firmware on my Airport Extreme, dumping AppleAirport kexts, disabling IPv6, renewing the DHCP lease (always comes back self-assigned) etc etc but nothing helps.
Additional info:
* my iPhone, MacBookPro and girlfriend's Windows laptop all still connect to the internet fine
* my iMac can see and connect to the other computers on the network, and vice versa
* my iMac cannot connect to my router, unless I manually assign my iMac an IP address
* if I manually assign my iMac an IP address, I can see my router, but am still 'not connected to the internet'
Has anyone got any ideas what could be wrong here, or should I be taking my iMac back to the Apple store?

Bought my iMac in February and worked fine up until about a month ago. I have assigned a manual IP address outside the range of other devices in my network (e.g. 192.168.0.10) and this seems to do the trick (most of the time). The problem I had was the self assigned IP address wasn't in the usual range for my router so while I was connected to Airport and the internet I couldn't view any webpages. Had to do the same thing to my Macbook which I purchased about a month ago.
The strange and very frustrating thing is sometimes it doesn't recognise my preferred network but then when it asks me to join a network, my network appears! When I try to connect and confirm password, connection times out. Whats that all about?
The bottom line is the assigned IP solution doesn't always work but it seems a combination of issues rather than one. None of the other devices on my network (ReadyNas Duo, Xbox 360, PS3, Wii etc) have issue connecting to the router using DHCP but for some reason Airport has trouble dealing with this and assigning a correct IP or can't find the network all together.
Only thing I can think is its some Airport update that has caused these intermittent issues and realy hope they fix it soon.
So no update but just wanted to share my experiences in what seems a very wide scale issue...

HT3924 can i use iMac keyboard and mouse when it is in Target Display Mode and attached to my MBP?

I can attach my iMac to my MBP via thunderbolt and run it in Target Display Mode, so that itsimply becomes a screen attached to my MBP.
What I really want is for the keyboard and mouse of my iMac to also operate as if they were attached to my MBP, but I cant seem to achieve this.
Is it possible?

Its a wireless mouse and keyboard - dont think I can re-pair the keyboard to MBP since I need it talking to the iMac to enable and disable TDM?
I expected TDM to natively pass through the mouse and keyboard to the MBP, since that is the obvious user requirement. But this does not happen.
So I guess I want a workaround so my iMac keyboard and mouse can drive my MBP while attached via Thunderbolt cable in TDM mode.

I've recently purchased an iMac and connected my HP Photosmart C4280 printer. The computer downloaded the driver software but the printer will only print in black and white.There doesn't seem to be anywhere to change this on the preferences menu. Any idea

I've recently purchased an iMac and connected up my HP Photosmart C4280printer. The computer downloaded the driver but the printer will only print in black and white. I've looked in preferences etc but cant see any way to change this. Any ideas??

Select a document, CMD+P, and set the color options as shown here:

When our iPad is in use on the internet, my iMac internet connection goes off. I can't get the two devices to work at the same time with the AirPort Express. Is there a setting somewhere I may have missed?

When our iPad is in use on the internet, my iMac internet connection goes off. I can't get the two devices to work at the same time with the AirPort Express. Is there a setting somewhere I may have missed?

When two or more devices conflict it typically means that the DHCP service is either misconfigured or is not running at all. DHCP provides IP addresses to local network clients.
Is your AirPort Express base station the only router in your current network configuration? That is, is it connected directly to an Internet modem and not to another router upstream of it?

IMac Yosemite connection problem

Yesterday updated my 2014 iMac to Yosemite 10.10.2 .
Up to that moment everything worked ok but after updating the iMac doesn't connect to Wifi, doesn't connect to the internet even when connected by ethernet.
How the **** can you restore an iMac that doesn't connect to anything?

In System Preferences --> Network --> Location bar (top of the screen). Pull down the the menu bar and click on "edit locations". Click the plus button to add a new Network Location then click Apply. See if that will force your iMac to connect to a network.

IMAC looses connection to Printer

Computer will not print and seems to lose connection to the printer. I deleted all printers and made a new printer connection. Printer has address 192.168.0.14. Later IMAC looses connection to printer again. I look at address on printer and it is now 192.168.0.15. Its done this several times. So why does the printer keep changing its address? Is there a way to set it permanently?

Hi I may have found what you are looking for to set the printer up with a dedicated IP Address. The printer obtains the IP address from your router, I'm not sure why your router is reassigning the IP addresses so frequently.  All of the steps for troubleshooting the Printer Does Not Maintain Wireless Connection are on available on that document, but I have copied the basics on setting up the Static IP address. (Solution five: Assign the printer a static IP address) You can review that document and try the other solutions if you continue to have connectivity issues. Locate your printer's current IP address, which you already haveOpen an Internet browser (Safari, Chrome, Firefox, etc.) on your computer.Type your printer's IP address in the browser's address bar, and then press Enter. The Embedded Web Server (EWS) opens.Click the Network tab from the EWS navigation menu.In the Wireless section, click the Network Address (IP) or IPv6 configuration, depending on your network setup.Click Manual IP, and then click Suggest a Manual IP Address.
A manual IP address, Subnet Mask, and Default Gateway displays.Don't forget to save or apply the settings I believe you might want to try to refresh your network connection afterwards. Power cycling your router allows it to reestablish a fresh connection to all of your devices. Here's how to power cycle your network if you are unsure: 1) Unplug the power cable from your wireless router (NOTE: Do not reset the router)
2) Do the same for the printer
3) Shut down the computer
4) First plug the router back in, and wait for it to fully power up
5) Then plug the printer back in and wait for the wireless light to become solid.
6) Once both the router and printer are on, go ahead and turn the computer back on  Check to make sure the manual IP address has stayed on the printer.
You may also have to remove and add your printer in Printers and Scanners.Open your System Preferences, click on Printers and Scanners.Click the name of your printer, click the minus sign (), and then delete the printer.Once the printer is removed, click the plus sign (), click Add Printer or Scanner, click the name of your printer  Please let me know if these steps resolved your issue, or if there is anything else I can do to help.  I look forward to hearing from you!   Thanks,

PC key caps for iMac keyboard

I am planning to switch from PC to iMac as soon as the 2012 iMac becomes available (whenever that may be). Since I use my current desktop for work and gaming, I plan to run Boot Camp with Windows 7 all the time. I prefer the look and feel of the iMac keyboard, but would still prefer a PC keyboard layout, so I my question is this: where can I buy PC keycaps on the iMac keyboard. The keys in questions would be:
iMac key     PC key
cmd left       alt
cmd right     alt gr
alt left          windows
alt right        menu
f13               insert
f14               print screen
f15               pause/break
I have found several websites that sell replacement keycaps for iMac keyboards, but I have not found any that sell PC keycaps for iMac keyboards. Any tips?

Thanks, The hatter, but I would prefer to keep the iMac keyboard since I really like its look and feel. No idea where I can buy PC keycaps for it?
I just strikes me, wouldn't this be something Apple could sell to custmers that buy iMacs to use primarily with Windows? I mean, since switching to Intel processors and offering Bootcamp, Windows would as natural a choice for iMac users as OS X?

IMac keyboard connection

Similar Messages

Maybe you are looking for