IMac late 2009 showing connected to Internet but no Internet
A couple days ago our Internet completely stop working. We called Comcast and they said that they had upgraded the service in our area and we needed to get a new modem. We got the modem with build in wifi on and it worked perfectly with our PC laptop and my iPhone 5. Then we connected my iMac through Ethernet and it said it was connected. I also tried to connect to the wifi and it said I was connected. Then when I tried to go on safari it said "www.google.com can not connect to the server because you are not connected to the Internet" I then went to network settings in system preferences and it said it was connected. I ran the Internet diagnostics and it said the Internet was working fine. I went back to safari and typed in the http://10.0.0.1 for the modem settings and I connected and typed in my password and could change any of the settings in the modem. I also said that the iMac was connected to the modem and was online. I then went and deleted the network preferences and restarted the computer and it still said that my imac was connect to the Internet but still no Internet on safari. I have contacted Comcast multiple time and they said that it was my iMac because all my other devices work fine with the wifi. My last resort is to do a clean install of mountain lion but I don't really want to have to back up my whole computer. I f you to help me out that would be great!
Thanks,
Gage
Try the basics first:
Change your router channel number. Most times this works & is all you have to do.
Disconnect & reconnect your modem. unplug it for about 10 seconds. Plug it back in. Do the same for Apple’s routers. Wait for everything to reboot.
System Preferences>Network
Click the Assist Me button.
In the next window that pops up, click the Diagnostic button & do the necessary.
Research Knowledge Base for network problems that pertain to the OS that is currently installed on your computer. See these basic networking KB Articles: http://support.apple.com/kb/HT1401 AirPort troubleshooting guide
http://support.apple.com/kb/HT2712 Using network locations in Mac OS X
Manually provided DNS server addresses are higher priority than DHCP's
http://support.apple.com/kb/HT1714 Solutions for connecting to the Internet, setting up a small network, and troubleshooting
============================
What to do when you can't connect to the Internet
Also, run the Airport Utility app which is located inside the Utilities folder.
=====================
If using a Linksys router, contact LinkSys Customer Support and/or post in their forums.
If using Apple's Airport, please re-post over in one of the AirPort Forums.
Similar Messages
-
I can't seem to get my iMac (late 2009 model) into automatic sleep mode. If I manually put it into sleep I don't have any issues.
I used to solve the issue by running "PleaseSleep" application but that doesn't work anymore since Lion. I now want to fix the underlying problem.
I'm not running any weird background processes and in my energy saver settings I've tagged "put the hard disk to sleep when possible:, "allow power button to put computer to sleep" and "automatically reduce brigthness". All pretty standard.
Is there anyone who can give me some pointers ?Today I solved the same problem for my iMac running Snow Leopard. See https://discussions.apple.com/thread/3008791#15947706. The method may help you, too.
For me it was the DynDNS Updater preventing my iMac from automatically entering sleep mode.
To my knowledge the cause of this sleep problem can only be a peripheral device or a process. So I suggest to first unplug all peripherals and test whether that's the cause. If not, I suggest to terminate one process after another and to test automatic entering of sleep mode after each. Start with user processes; continue with system process if necessary.
At least that's the way I found the offending process. Fortunately, I was able to change the configuration of that process to allow again automatic entering of sleep mode.
Good luck! -
I can not connect to iswifter, some times it is connected and some time it is not connected and getting message " UNABLE TO CONNECT TO SERVER , CHECK YOUR INTERNET" but my internet connection is ok and I can open other web site with out any problem. Please guide me how to solve this issue.
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
Cheers, Tom -
Constant Disconnection from Airport Extreme Networked iMac (late 2009)
I keep trying to copy fairly large files (2-7GB) over my Aiport Extreme (latest—5th generation) network from a early 2011 Macbook Pro to a 27" iMac (late 2009), and I keep getting disconnected from the iMac while the file is copying. I've tried repairing permissions on every computer in the house and restarting them, but I'm still having issues. I have no issues copying files to another late 2011 Macbook Pro in the house, so it seems to be happening only when I copy them to the iMac. The iMac is running Snow Leopard and the Macbook Pros are running Lion, so could that have something to do with it?
Additionally, I had been trying a wireless extended network with another previous generation Airport Extreme, but I found the connection wasn't much stronger with the extension, so I've just been leaving the second Airport Extreme unplugged. I've had that unplugged for months and haven't had any issues, so I don't think that's the problem.
I'm hoping this isn't a sign of something being wrong with the Aiport card in the iMac. Anyone have any ideas?Bump?
-
Can I use 27' iMac(Later 2009) as a display for Mac Pro(future 2013)?
Can I use 27' iMac(Later 2009) as a display for Mac Pro(future 2013)?
See > http://support.apple.com/kb/PH11302
To be able to use the iMac as an external display, the Mac Pro should come with a Mini DisplayPort or Thunderbolt port, so think that it will include Mini DisplayPort or Thunderbolt, although we don't know anything.
To connect the iMac to the Mac Pro, as your iMac has got a Mini DisplayPort, you have to use a Mini DisplayPort to Mini DisplayPort cable (Thunderbolt is compatible with Mini DisplayPort cables, but Mini DisplayPort isn't compatible with Thunderbolt cables). Then, just follow the steps of the page above to use the iMac as an external display -
IMac late 2009 crashing with Maverick
I have a problem with my iMac (late 2009) that I cannot solve. It has become very slow, and crashes regularly after some time. Impossible to repair it, neither from the disk recovery partition, nor an external HD boot and using Disk Utility. So everytime I have to download Maverick again and install it to be able to work. I have noticed that after the fresh installation, and and a few days of working, Disk Utility shows problems with Disk permissions that need to be repaired. This occurs systematically.
To complete the story, the iMac was working fine when I bought it, but was returned to Apple for the HD substitution (Apple replacement programme). After this, and/or after installing Maverick (but I am not sure the 2 things are related), the problem started.
I have also tried PRAM resetting, no effect. Any suggestion?For 2009 iMac owners on Mavericks, I recommend this procedure. Saved me a lot of frustration after almost a month of constant crashes and getting no work done.
I downloaded a temperature monitor to see what was happening. Before the fix, the temperature on the "north bridge heat sink” would just go up and up without fail. Particularly when using flash or a video related application. It would just keep rising until until the graphics card just shuts down.
It’s a 3 year old bug related to 10.6.3 and GPU drivers (ATI/AMD). Here’s the link to the guy who figured it out and should be testing for apple. You have to use terminal to solve the issue. He explains everything in detail.
http://www.pauloamgomes.net/blog/fix-weird-os-x-freeze-imacs-late-2009
After the fix, the temperature at the graphics card stays level. I’ve also decided to use a fan control app for the moment so temperatures stay around 50 and the iMac runs like it should. Even in my hot room in the summer.
Been crashless since doing the procedure. Try it out. better than lugging a 27" iMac around town. -
IMac late 2009 gives beach ball. All test return normal.
I have an iMac late 2009 model 27 inch. update to Mavericks (10.9.1)
Returning from holiday, I found my iMac dead slow, with spinng beach balls on every click. Until now I have done ....
Create new user account, logged in as this new user.
reset PRAM / NVRAM
boot up in safe mode
boot up in recovery mode, perform disk test. (all normal)
I managed to copy the most important directories to an external storage. Got more and more read/write errors.
iMac had become unusable slow.
Made bootable USB stick, used this to boot and did a complete HD erase.
Clean installed Maverick.
Problem still persist.
Performed AHT (Apple Hardware Test) in extented mode. No error founds.
Performed Black Magic Disktest, around 110 MB/s seems normal speed.
After reboot, the first application start up fast (which gives me hope) but starting the second app, takes several minutes with this spinning beach ball.
Anyone here having simular problems or otherwise can point me to a solution?Thanks for you advise. I did a clean install, so without any third party software like Trusteer Rapport.
On you advice I ran EtreCheck. This is the result:
Hardware Information:
iMac (27-inch, Late 2009)
iMac - model: iMac11,1
1 2.8 GHz Intel Core i7 CPU: 4 cores
8 GB RAM
Video Information:
ATI Radeon HD 4850 - VRAM: 512 MB
System Software:
OS X 10.9.1 (13B42) - Uptime: 0 days 1:58:8
Disk Information:
WDC WD20EARX-00PASB0 disk0 : (2 TB)
EFI (disk0s1) <not mounted>: 209,7 MB
Macintosh HD (disk0s2) /: 2 TB (1,98 TB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
OPTIARC DVD RW AD-5680H
USB Information:
Apple Inc. Built-in iSight
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Internal Memory Card Reader
FireWire Information:
Thunderbolt Information:
Kernel Extensions:
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
Launch Agents:
User Launch Agents:
User Login Items:
iTunesHelper
Internet Plug-ins:
Default Browser: Version: 537 - SDK 10.9
QuickTime Plugin: Version: 7.7.3
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 1.9 - SDK 10.9
AppleAVBAudio: Version: 2.0.0 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
3rd Party Preference Panes:
None
Bad Fonts:
None
Old Applications:
None
Time Machine:
Time Machine not configured!
Top Processes by CPU:
2% WindowServer
2% Mail
1% Safari
1% com.apple.WebKit.Networking
1% hidd
Top Processes by Memory:
139 MB softwareupdated
115 MB Safari
98 MB com.apple.IconServicesAgent
90 MB mds_stores
74 MB Finder
Virtual Memory Information:
4.57 GB Free RAM
2.15 GB Active RAM
612 MB Inactive RAM
697 MB Wired RAM
264 MB Page-ins
0 B Page-outs -
IMac late 2009 with 6GB RAM, slow with Yosemite
Have you ever used that small pc computers with slow processors, called netbooks? This is what my super fast iMac late 2009 (6GB RAM) with Mavericks turned into, after upgrading it to Yosemite OS X.
I mean, processor itself doesn't look to busy, but user experience is click and wait (when nothing happens, I almost want to click again but then action happens). Opening window animation is like slide show - it is not smooth as it was before, with Mavericks.
Anybody with iMac late 2009 can confirm this or is it my setup only?
I have the basic late 2009 model, except I upgraded it to 6GB RAM soon after I purchased it.
This is how my About this Mac looks like:
And this is how my hard disks look like:
Nothing specially busy here, just slow Yosemite. When I open Safari, Mail, iPhoto and iTunes, it is not good to open any other app, because I might wait much more. I caught my self using iPad while opening fifth app on iMac (just to get an idea, how very slow it feels).Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen. Click the Clear Display icon in the toolbar. Then take one of the actions that you're having trouble with. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting. -
ITunes will not open up after the latest iTune update 12.01 on my iMac (late 2009)
The latest iTunes 12.01 refuses to open on my iMac (late 2009) after installing Yosemite, but works OK on my Mac Mini (late 2012) also with Yosemite. help!
Hi there 1302Scotty1944,
You may want to try reinstalling iTunes as an initial troublshooting step. The article below has more information.
Troubleshooting iTunes installation on Mac OS X
-Griff W. -
How to install windows 7 on Imac late 2009 using Vmware/Vbox
Hey guys. Here's the thing. I've installed Windows 8 on my imac late 2009 but then i realized that there's no bootcamp drivers for it (check image).
everything works fine except for the video drivers that crash everytime when i install any driver (bootcamp or manually).
So I've searched on many forums n i found a guy that could do that by using Vmware/Virtualbox by accessing the full disk n installing it from there.
Here's what we wrote -> (http://forums.macrumors.com/showthread.php?t=1526883)
"Thanks for the suggestions, but installing from usb wasn't working, and refit didn't recognise the external dvd drive too (it was in the list, but when i tried to load it i got an error).
But i found a solution, not usual procedure but still good and easy to do.
I installed virtualbox, created a virtual machine with the full disk access (you'll have to unmount all the partitions first and run virtualbox as root), started installing windows, when the copy of the files ended and the vm was rebooting i simply closed it and rebooted my imac and finished the installation directly on the imac, everything went well...
Thanks again for the help"
Important notes :
- My superdrive is broken
- I can't boot efi windows 7 (cause it needs efi 2.0)
So i might ask u 2 things..
1- Is there a way that i can install all those drivers on windows 8.
2- Can u describe how he did that with Vmware/Virtualbox?I can't. Just like i said. My superdrive is broken so the only way is to boot from usb but my imac's efi firmware is 1.0 and to boot a windows 7 efi you must have at least efi firmware 2.0. I managed to install windows 8 cause it needed efi firmware 1.0 that's why.
-
Can I use my 27"iMac late 2009 as an external display for a non apple product such as a cable box?
To get TV on your iMac off the cable box you would need to use an external TV tuner device such as the company ElGato is highly regarded for. I have used one of their EyeTV products for many years with my iMac to watch television shows from my Comcasst cable TV box. You can look at the models here:
http://www.elgato.com/elgato/na/mainmenu/products.en.html -
Temperatures - too high ? iMac Late 2009 i7
Hello. I just wanna ask if this temperature of my iMac Late 2009 are normal...
Intel i7 - 2,8ghz
8 gb ram
2 tb Hitachi
ATI 512MB
Temperatures :
http://i58.tinypic.com/rjnu35.png
Do i have to clean fans or is it OK ? These temperatures = listening music, browsing internet ...
Thanks....Startup - Gray, Blue or White screen at boot, w/spinner/progress bar
Startup - Gray Screen
Startup Issues - Resolve
Startup Issues - Resolve (2)
Startup Issues - Resolve (3) -
Can I factory restore an IMAC Late 2009 without the orginal DVD's?
Can I factory restore an IMAC Late 2009 without the orginal DVD's? I was given a computer and want to remove the previous owners user login and passwords. I want a fresh install like it was bought new.
You can create a new Admin User in System Preferences then delete the current User. This will give you a clean User but the base system files might have extensions etc installed.
If you upgrade to Mavericks, then you would wipe the computer giving you exactly what you want.
While your computer might meet the requirements, also check your applications for Mavericks compatibility here: http://roaringapps.com/
Make sure all your software like Microsoft Office and Adobe CS Suites is compatible with Mavericks.
OS X Mavericks: System Requirements
To install Mavericks, you need one of these Macs:
▪ iMac (Mid-2007 or later)
▪ MacBook (13-inch Aluminum, Late 2008), (13-inch, Early 2009 or later)
▪ MacBook Pro (13-inch, Mid-2009 or later),
▪ MacBook Pro (15-inch or 17-inch, Mid/Late 2007 or later)
▪ MacBook Air (Late 2008 or later)
▪ Mac mini (Early 2009 or later)
▪ Mac Pro (Early 2008 or later)
▪ Xserve (Early 2009)
Your Mac also needs:
▪ OS X Mountain Lion, Lion, or Snow Leopard v10.6.8 already installed
▪ 2 GB or more of memory <--- I suggest 4GB as minimum
▪ 8 GB or more of available space -
IMac Late 2009 i7-2.8Ghz Poor Performance
My iMac Late 2009 seems to run very slowly after a clean install of OSX Mavericks. I am not sure that happened after the clean install. But now i have noticed it.
I am using mainly photoshop. Everything is sluggish. Moving or resizing layers.
Generally it runs very slow with everything.
The surprising fact is after i ran GeekBench.
The average score for 32-bit test is about 2000 for single-core and 7000 in multi-core
My results are: 700 for single-core and 3000 in multi-core.
Few users seem to have about the same results as me..
My specs are:
Late 2009 iMac
intel i7 2.8Ghz
12GB of Ram
ATI Radeon HD 4850 512 MB
Kingston SSDNow V300 120GB with trim enabled (i upgraded my ssd after my old corsair 90GB ssd broke!!!)
OSX Mavericks 10.9.3
You can see all the iMac Late 2009 i7 2.8Ghz results here.
http://goo.gl/yuoQvm
Do you have any suggestions?
it drive me crazy!!
I am considering a clean install but i want to wait for the Yosemite release.1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
Copy a line of text in this window to the Clipboard.
Paste into the window of another application.
Wait for the test to run. It usually takes a few minutes.
Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/ { next;} /(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' 's/0/Off/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;D12 26 48 59 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
I just installed 16gb in my 21" iMac late 2009 and I have macbook 13" late 2008. Can I put the 2gb 2rx8-8500s-07-10-f2 ram in the laptop. Does anyone know the difference of 2gb 2rx8-8500s-07-10-f2 and 2gb 2rx8-8500s-07-10-f1 . thank you!
I followed your instructions and installed Developer Suite 10G on Windows Vista Home Premium edition. I have Oracle 11G DB running on the same machine.
Two points, Steve:
1. When I tried to set the maximum virtual memory to 6110 an error message displayed from Windows and told me that I can't set the maximum virtual memory to more than 4096. I set it to 4090 and it worked and I got nothing wrong during the installation process.
2. After installing JInitiator and disabling Java on Firefox I called the http://127.0.0.1:8889/forms/frmservlet page and everything seemed to be OK because the Oracle Forms Services logo appeared and then a successful installation message appeared , but as I clicked (ok) to continue a gray screen appeared inside the browser (like the one displayed when you try to run a Java applet inside a browser) and then I wait to death till something appears but sadly nothing. I just get a blank gray screen inside my Firefox browser.
Do you have any idea what to do to solve the problem?
Regards
Maybe you are looking for
-
Album Artwork Viewer Gone from Music Library
Ok why won't itunes do this any more? I want the album artwork to show in my music library. cus the screen is so bare without it. how do we get the album artwork to show up in itunes 11?
-
To get only the error messages???
Hi, When i compile my java code i am getting warning errors also . Is there anyway to get only the error messages only, not the warning using javac or java??? Thanks, JavaCrazyLover
-
Trying to run GPU sniffer .exe with CMD but it cannot find the Adobe folder.
Hi there. I am trying to get Hardware acceleration on Adobe premiere pro. Ive done this a few times before no problem. I do this by typing this into cmd. cd:\Program Files then \Adobe but whenever I type that in I get " '\Adobe' is not recognized as
-
Trying to issue simple existsNode & extract queries on a table with 160K XML docs (unstructured) and the performance is an issue. Without an index its 2 minutes with a CTXXPATH index its 2 minutes and even with a function based index with the CTXPATH
-
hi..i always got this massage when i want to buy (please connect itunes support to complete transaction)