IMac miniDisplay Port and USB headset

I have recently purchased the Belkin AV360 in order to use my PS3 on my iMac 27".
It works just fine, both video and sound, but I would like to have the sound output to my USB headset if possible.
When I plug in the USB headset, it continues to output sound from the operating system rather than the video that is being displayed from the miniDisplay Port. I assume that by using an analog headset might fix this but I would prefer not to spend more money on another headset if i am not forced to.
So, does anyone know if it is possible to get a USB headset to play audio when in Target Mode?
as well
If I use an analog headset, would it play audio when in Target Mode?
Thanks in advance for any help/info!

Hi Patrick,
Now test with just the Hub connected, then test by adding one USB device at a time, most likely one of the USB Drives is having problems.

Similar Messages

Which are the USB 2.0 ports and USB 3.0 ports?

Purchased a hp DV7-6143cl. Which are the USB 2.0 ports and USB 3.0 ports?
Thanks

USB 3.0 may be a different color.
Left side USB ports are 3.0
Right side are 2.0
See your Service guide (page 19)
Main page for your model

Connect iMac MiniDisplay port to VGA or composite projector, PLEASE!??

I have an iMac and an Epson Powerlite 77c projector I am wanting to link up. I need to go from the minidisplay port in the back of the imac to either composite or vga (female) connection. Apple has a minidisplay to vga adapter which i'm assuming will work.
Epson Projector connections - VGA (female,) Video and audio in (composite), S-video
iMac display connections- Mini display port
Would it be better to use vga or composite for watching movies and using the computer through the projector?
And...if i am thinking of the correct cable i'm also going to need an extension to actually get to the monitor. Since the minidisplay to vga cable is female and so is the vga input on the projector, Is there such thing as male-male vga cable and would it send the signal properly from the imac to the projector?
Is there any other way to link these two devices up? Component switch or wireless transmitter?
Thanks

Apple has a minidisplay to vga adapter which i'm assuming will work.
Yes, it will work fine!
Would it be better to use vga or composite for watching movies and using the computer through the projector?
The iMac is not able to connect via composite cable at all. VGA, Mini Display Port, and HDMI (through adapter) are the only types of cabling that will work. Keep in mind that composite is the absolute WORST video quality you could hope for. Here is the scale from worst to best...
Composite, S Video, Component, VGA, DVI/HDMI/MDP (these last 3 are essentially the same quality)
Is there such thing as male-male vga cable and would it send the signal properly from the imac to the projector?
Yes, they are extremely common, and it will work fine. I would be surprised if there wasn't an extra cable of this sort already in the projector bag. It is standard gear for all of my office's projector sets.
Is there any other way to link these two devices up? Component switch or wireless transmitter?
The best connection you can make with the powerlite 77c is through VGA.

IMac MiniDisplay Port 2nd Monitor Setup

Looking for advance on setting up a second monitor. My current arrangement is unique in that I currently use my iMac as an external display for my dock HP Laptop via a Displayport to MiniDisplay port cable.
So when I use my docked laptop I have two monitors, one is the iMac and the other is an HP LCD monitor connected via DVI.
What i would like to do is have the HP monitor serve as my iMac's external monitor when I'm not using the laptop. It has an HDMI input, so I've ordered a miniDisplayport to HDMI cable...
What i'm looking for is a switch that would allow me to either manually switch the iMac into the Laptop's external display OR automatically switch when it sees a signal coming from the laptop dock.
I think this would be a MiniDisplay port switch that would allow for two way video.
Any one out there try this?

Hi John,
I really have no idea, but as a test, hold alt key at cold startup, let it set on that screen for maybe a minute or two, then click the startup volume or hit enter... any change?
Also, if you log out & back in does it show up?

MiniDisplay Port and Thunderbolt - the same??

I am looking for a cable to connect my Dell 19inch Monitor..
I did use an Apple adaptor to DVI and a DVI cable to my Monitor from my i7 Apple Macbook Pro with Thunderbolt, but suddenly this has stopped working and the Monitor isn't recognised?
I am now looking for a single cable which maybe easier but have been told by different sites and eBay sellers that Thunderbolt and MiniDisplay Port are the same and others that its NOT the same??!?
My DVI cable had 2 sets of 9 pins in 2 blocks inside the cable end, was this a contributing factor? Do I need a DVI end cable (going into the Monitor) with a full set of pins on the end?
As mentioned this DID work and when I use the same DVI cable to connect the same Monitor to a PC it works fine?
I'm still guessing that it maybe the Apple Adaptor, but if i bought a brand new cable like this, maybe this should correct it - I just need to know if I should buy a "MiniDisplay Port" connector or "Thunderbolt" connector?
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=261009051009&ssPageName=ADM E:X:RTQ:GB:1123
Thanks for any help

The physical port is the same but the function is different and the same.
The port on your mac can do both thunderbolt connections and mini displayport connections. But on older system with that same port they can only do the displayport part.
As to why your monitor stopped being seen well that is just one of the apple mac os x glitches. For some reason apple really has not figured out how to do external monitors very well let alone dual monitors.
Try shutting down completely, powering off. Then restart with the external monitor and tb to dvi adapter disconnected. Then connect the adapter and then the monitor. If that still doesn't work then you may have a bad adapter or a bad cable.

Does the late '09 24" iMac minidisplay port allow for video input as well as output?

Greetings,
I own a 24" 2.66 GHz Intel Core 2 Duo iMac with the Nvidia 9400 card. It's nearing the end of it's gaming life but I still want to use it for everything else after I get my new tower. Everything I can find in reguards to using an iMac as a monitor for a different computer references the 27" iMac one model newer than my current computer. Is the minidisplay port on my machine able to accept an input or am I forced to get a subpar monitor for my 2nd machine? Thanks!
~Dan

Only the 27" can be used in target display mode.

Ventrillo and USB headset issue

I recently purchased a USB headset to use with ventrillo (voice-chat software). While it is a definite upgrade over the built in mic, my friends are telling me that it is also producing a noticeable buzzing sound when I speak, which seems to increase and decrease randomly. I'm told sometimes its not too bad, and sometimes they can't hear me at all over the buzzing, which happens with no changes to the mic output. I think this buzzing problem may be caused by the external keyboard that I use, but am not sure.

You can very easily test your theory by disconnecting the external keyboard and using the built-in keyboard instead, and seeing whether the buzz goes away.

Esata Port and USB Ports Not working

My USB ports have not been working for a long time. They will charge my phone, but windows doesnt pick them up nor any other device I connect via any of the USB ports. I recently took my computer into a shop to have them fix a wire that had come undone
and asked them to look at my USB ports and figure out why they werent working. When I got it back they told me the USB ports were connected to the motherboard and to get them to work they would need to replace the motherboard. They said however that the Esata
port worked and I asked them if I could use that to connect my USB from my iPhone in order to connect to itunes. They said with an adapter it should work. So I bought the adapter and of course when I connect the USB in to it, the computer wont recognize the
device. I even tried connecting the USB directly into the Esata port and still nothing, but it will charge the phone, just not recognize it.
Any advice would be much appreciated.
The computer is a Dell Inspiron N7010 running Windows 7

Hi,
Obviously, you can't connect USB directly into Esata port, for they are not compatible.
Attempt to install your phone usb driver and then check if it works.
If not, it should be related to your adater, not all adapters support data transfer.
Andy Altmann
TechNet Community Support

Why is my Intel iMac restarting randomly and USB keyboard not working randomly?

My intel iMac has been randomly rebooting itself without any error messages. It also seems to coincide with the keyboard (USB) not working, but not always. At first, it seemed to happen right after waking the computer from sleep, but now it happens when I am just sitting at the computer about once or twice a day. For now, i have temporarily removed all external devices (except time capsule) and disabled any bluetooth or iTunes synch'ing over wifi. I have also disabled all power management features.
I've tried different keyboards and resetting the SMC. Could bad memory cause this?

Could be anything from a loose power cable, to loose or bad RAM module.
1. Check all your power connections, including the mag connector on the back of the iMac.
2. Reinstall the RAM modules, as per > iMac: How to remove or install memory. When installing new or reinstalling RAM, be sure to push firmly on each module with both thumbs to insure that they are fully seated in the slots.
Then if it is still acting up...
3. Run the > Extended Apple Hardware Test

Strange issue with USB mouse and USB headset.

Good day everyone.
I was experiencing a rather strange issue with my mouse and headset(both USB).
I am using KDE and ALSA, if that matters.
They are working just fine, but sometimes, when I try to lower\raise volume, my mouse derps out. I can move it around, but I can't click on anything(sometimes though, I can click on stuff in window that was active before and sometimes only on KDE panel) until I re-plug my headset. Then, nothing can use my headset until I reboot.
Anybody ever had that problem?

I've had similar problems for some time now. Unfortunately, I don't know what the issue is either, but perhaps we can come up with some setup similarities and narrow it down. I have similar trouble with just alsa or with pulseaudio, so that's not it. It is unrelated to the DE, as it happened for me in both gnome 2 and xfce 4. It is not related to the machine either, as the same quirks occur in other machines with the same headset. I have had inconclusive results with downgrading to kernel26-lts, the ancient kernel. I thought at some point it messed up and I was sure the older kernel didnt help, but after trying recently-ish, I had no trouble for days -- until I found that I didn't have trouble on the main kernel either. ... then a few days later, it showed up again. Very irritating!
https://bbs.archlinux.org/viewtopic.php?id=122475
Does my old thread sound like your issue somewhat?
Essentially, at times, if the headset (wireless) is changed into a different power state (unplugged/plugged) or the mic state is toggled (mute/unmute), things that could be clicked on normally cant unless theyre in the window already focused -- mostly.
What headset are you using? 32 or 64 bit arch? Have you tried downgrading to kernel26-lts?

Suggestion for the Dual mode analog and USB Headsets

For the next set of headsets can the USB adaptor be solid with out a cord that bends. I am expecting to have to replace my TACTIC 3D ALPHA's THX USB Adaptor because of broken wires but no complaints for the sound and headset only the adaptor.

Hi,
What caused the broken wires?
Did you purchase the headphones through Creative or from your local dealer?

Pulseaudio and USB Headset

I have a Creative HS-950 headset and I can get sound using Pulseaudio, however, it makes Pulseaudio crash quite often. It usually happens when I start watching a video, be it on Youtube or from my disk. Normally all I have to do is choosing the headset again in the sound preferences, but it is still very annoying.
Another issue I have is that whenever I open Skype, it takes a while before my microphone works (there's not input signal for a minute or so).
Also, this doesn't happen if I use Ubuntu so I guess the headset is not the problem.
I'm using Gnome 3 (fallback mode). 64-bit system.
Let me know if there's any information you need.
Thanks.

I've recently had to add
Enable=Source,Sink,Headset,Gateway,Control,Socket,Media
to /etc/bluetooth/audio.conf. And then restart the bluetooth service / daemon.
# systemctl restart bluetooth.service
# or, whatever ...
# rc.d restart bluetooth
Then it works again. This may just be a systemd artefact, however.

Just purchased ipad 2 yet itunes cant see the device. I have tried switching computer on and off and tried different usb ports and usb cables I am going mad here I thought this was supposed to be easy and fun, can anone help please

How can I get started please. I have plugged my usb cable into computer. I have the latests verision of Itunes but I cant even set up the ipad because itunes cant see the device

Do you have the most current version of iTunes?

MBA and iMac as display and external storage

Hi there,
I currently have only Macbook Air 2012 and I know that buying an iMac I can use it as an external monitor (price is almost the same as Thunderbolt Display). I'm thinking if connecting iMac to my Macbook I could access iMac's HDD (to use it as an external storage for films, photos since my Macbook is only 128GB ssd). Also if I can connect USB devices into iMac's ports and access them on my Macbook like it's possible with the Thunderbolt Display.
Thank you!

OK, i found that apart from Target Display Mode there is also Target Disk Mode. But can I combine them at the same time?
(I want to have iMac as external hdd and display, but browsing OS and apps from my Macbook).
Also, do I have enough ports in my Macbook Air (2012)? Thunderbolt goes for screen sharing, but I heard that for Target Disk Mode I need firewire cable? Do I have this port at all in my MBA?

HT3382 What if I want to connect the minidisplay port of a mac book air with the minidisplay port of a monitor? Can I use a the thunderbolt cable to do this connections?

Using mac book air (late 2010) minidisplay port and minidisplay port of monitor Monitor Dell UltraSharp de 23.8" Widescreen U2414H.
Can I connect them using a thunderbolt cable or is there a specific cable I can use to stablish this connection?
Thanks

A Thunderbolt cable won't work. Use a Mini DisplayPort to Mini DisplayPort, or Mini DisplayPort to DisplayPort, cable.
<http://www.monoprice.com/Category?c_id=102&cp_id=10246>
(If you use DisplayPort, make sure you use the Input, not Output, port on the display.)

IMac miniDisplay Port and USB headset

Similar Messages

Maybe you are looking for