IMac monitor goes to black while running FCPX

I am running FCPX on the 27" iMac (i3) with 16GB ram. After about an hour, the monitor (sometimes) will simply shutdown. I can still hear the audio and the control would still work. I am able to see the desktop via my LOGMEIN account, so I know the computer has not crashed. After saving and shutting down the computer, it takes about 3 - 6 reboots until the monitor will turn back on. This seems to me to be a GPU issue that is being taxed by FCP and it takes awhile for it to wake up. I have brought the computer to Apple and the ran tests on it for the last week and could not recreate the issue. They did not, however, use FCPX to test the video. I am going to pick up the computer today and per their instructions reinstall FCPX.
Has anyone else had this or heard about this type of problem?

Hi,
Check the monitor and cable on another PC. Alternatively try another known good monitor and cable.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Similar Messages

IPad goes completely black while using it, comes back in a few seconds

iPad goes completely black while using it, comes back in a few seconds battery doesn't hold charge either

Try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. When the screen goes blank then power ON again in the normal way.] It is 'appsolutely' safe

I upgraded to Mavericks and my iMac monitor goes black randomly, but my attached cinema monitor stays active. I can fix it by putting it to sleep and waking it up again. But often it happens immediately after.

I have a 30in cinema display attached to my iMac and the iMac screen randomly goes black while the cinema stays active. I can put it to sleep and log back in which fixes it, but often it happens again immediately after. Sometimes it happens so quickly I can't even finishing logging in! I'd like to know if this is a Mavericks issue and I will roll my machine back. Thank you!

RocknOats
Wanted to update you on my situation with this.
So far 8 hours have gone by and I have not had a screen blackout.
FIRST I did the Hardware Test. TWICE on the extended test, the instructions on the KB Article explain. It took almost 3 hours, but while the test was running, both times, my computer screen did not go black.
I did get an error message, both times. Different each time. I looked up both of the error messages on discussion boards. Lots of conflicting info
One good thread said my first error was that my hard drive was bad and would probably fail.
The next error message I researched said that a fan was bad or needed replacement.
(information comes from other folks on discussion boards, not from Apple or technician)
Not sure what exactly those 2 error messages indicate but I followed a thread where someone found a solution by doing the following. So far it's worked.
After Hardware Test I did a shutdown and an SMC resest. Unplugged computer power source from wall and computer for about 10 minutes.
Finally after a restart I downloaded "SMC Fan Control" (CNET Downloads has a nice safe copy you can download)
There is a temperature monitor and from what I've read so far, keeping the CPU temperature under 50˚C is ideal. Making sure your fans and computer is in a well ventilated area/room too of course.
The SMC Fan Control helps you set your own speeds on the fans and so far everything has been going normal.

IMac monitor goes dark; 2nd monitor ok

I have a dual monitor setup on my iMac (2009) running Snow Leopard (10.6.8). The iMac monitor had been working great, but now it goes to a black screen. I am able to access it briefly (for about a second) by lightly pressing the power button on the back. The iMac monitor flashes on briefly when I do this and I'm able to quickly click on user. I used this same method to open Settings and drag it over to the 2nd monitor to change the display setting to Mirror mode, so I'd have access to the dock on the 2nd monitor (Dell 2007WFP).
I have tried the following so far:
     checked cables
     restarted by powering off, pressing on/off button for 5 seconds, unplugging for 15 seconds.
     booted in Safe Mode
     reset PRAM (I believe this was reset, but I don't know for sure because I couldn't see anything on the monitors.)
Other information:
     2.66 GHz Intel Core 2 Duo
     8 GB 1067 MHz DDR3
     NVIDIA GeForce 9400
Thank you in advance for help with this issue!

Replacing FBDIMMs would be today inexpensive and worth doing.
No one knows if heat is an issue without your using thermal sensor monitor. Probably want to up the default fan speeds while at it.
And because you don't have Lion+ then even more reason to setup a small maintenace volume on another drive with OS X basic system for repairs. In fact you should always have a bootable backup or two you can rely on.
Restarting may work, or it may be you have now new issue with corrupt fies or directory that a safe boot even is no guarantee of fixing.
When in doubt, try a clean new OS install on another drive.
And FBDIMMs: $25 for a 2x2GB set on Amazon.com
You want to get the most out of what you have, a small investment in RAM, maybe recycle those drives for 2-4TB units. And an SSD will have system responding better and perform better.
My guess, the 5870 wasn't needed and was overkill and a 5770 for almost half would have been more than adequate.

My imac g5 goes to sleep while in use. typically when im playing games

For the last several months, my mac has been going to sleep during use. Typically when im playing games, like second life, or in any type of programs, but it has also been going to sleep while im watching videos on youtube or hulu. It's getting worse and worse, and once it goes to sleep the first time, it doesnt stay on long afterwards. When browsing the internet, its fine. I've recently backed up 40,000 images that I had on my computer, and deleted for more memory space. but it didnt stop it from going into sleep mode, it just doesnt go as quickly as it was before. I was told that it was a memory problem, but since i deleted all of the images off of my computer, the problem still persists. I even turned sleep mode to "never". Here are some of my computer stats:
Memory: 512 MB
Processor: 2.1 GHz PowerPC G5
Space Free: 104.18 GB
Space utilized: 128.58 GB
My monitor stays warm, never gets hot, but sometimes i can hear the fan blowing loudly when it goes into sleep mode
If anyone could help, i would greatly appreciate it =)
Message was edited by: mswilliams
Message was edited by: mswilliams

The temps are a bit higher than I'd expect under normal circumstances, and too high while playing games, but what is the room temp where it is?
I def. think its a temp thing now. but why does it only raise when im playing games or watching videos online?
Games tipically press the CPU, Video Card, RAM, and everything else much harder than most apps.
It may be a Fan not working properly, or just dust buildup.
Boot off your Install Disk while holding down the *d key*, (not c key), then run the extended Apple Hardware Test. Some disks require you to use the Option key at bootup to select AHT. Some models have a separate AHT CD.
Report any errors it finds.

IMac late 2009, screen blacks out running Yosemite 10.10.2

My iMac's screen blacks out for no apparent reason, and the computer is still running normally. But I can't see it.
I thought temperatures were to blame, resetted fans with Macs fan control to speeds, where everything is nice and cool, the problem persists.
The screen might black out, for no apparent reason while working, or when idle. Trying to restart manually, it might black out while in the login screen, or even the apple logo. Or it might even restart normally and work for 8 hours. I have been trying to leave login items out, even Macs fan control an iStats, and the problem remains.
If I clear PRAM while rebooting, I might get a new lease of working life, but not persistently.
The problem started around two months AFTER I installed yosemite and with no new programs installed at the time.
Please Help.

And an Etrecheck
Problem description:
iMac screen blacks out in yosemite
EtreCheck version: 2.1.8 (121)
Report generated 1April, 2015 at 15:20:46 GMT+3
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    iMac (27-inch, Late 2009) (Technical Specifications)
    iMac - model: iMac10,1
    1 3.06 GHz Intel Core 2 Duo CPU: 2-core
    8 GB RAM Upgradeable
        BANK 0/DIMM0
            2 GB DDR3 1067 MHz ok
        BANK 1/DIMM0
            2 GB DDR3 1067 MHz ok
        BANK 0/DIMM1
            2 GB DDR3 1067 MHz ok
        BANK 1/DIMM1
            2 GB DDR3 1067 MHz ok
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
    ATI Radeon HD 4850 - VRAM: 512 MB
        iMac 2560 x 1440
System Software: ℹ️
    OS X 10.10.2 (14C1514) - Time since boot: 1:12:55
Disk Information: ℹ️
    Hitachi HDE721010SLA330 disk0 : (1 TB)
        EFI (disk0s1) <not mounted> : 210 MB
        Macintosh HD (disk0s2) / : 999.21 GB (554.08 GB free)
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
    OPTIARC DVD RW AD-5680H
USB Information: ℹ️
    Logitech USB Receiver
    Apple Inc. Built-in iSight
    Generic USB Storage
    Apple Internal Memory Card Reader
    Microsoft Wired Keyboard 600
    Apple Computer, Inc. IR Receiver
    Apple Inc. BRCM2046 Hub
        Apple Inc. Bluetooth USB Host Controller
Gatekeeper: ℹ️
    Anywhere
Kernel Extensions: ℹ️
        /Library/Application Support/Avast/components/fileshield/unsigned
    [loaded]    com.avast.AvastFileShield (2.1.0 - SDK 10.10) [Click for support]
        /Library/Application Support/Avast/components/proxy/unsigned
    [loaded]    com.avast.PacketForwarder (2.0 - SDK 10.10) [Click for support]
        /Library/Extensions
    [loaded]    com.driver.LogJoystick (2.0 - SDK 10.9) [Click for support]
    [loaded]    com.logitech.driver.LogiGamingMouseFilter (1 - SDK 10.8) [Click for support]
        /Users/[redacted]/Library/Services/ToastIt.service/Contents/MacOS
    [not loaded]    com.roxio.TDIXController (2.0) [Click for support]
Startup Items: ℹ️
    TuxeraNTFSUnmountHelper: Path: /Library/StartupItems/TuxeraNTFSUnmountHelper
    Startup items are obsolete in OS X Yosemite
Launch Agents: ℹ️
    [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
    [running]    com.avast.update-agent.plist [Click for support]
    [loaded]    com.avast.userinit.plist [Click for support]
    [running]    com.bjango.istatmenusagent.plist [Click for support]
    [running]    com.bjango.istatmenusnotifications.plist [Click for support]
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist [Click for support]
    [loaded]    com.avast.init.plist [Click for support]
    [loaded]    com.avast.uninstall.plist [Click for support]
    [loaded]    com.avast.update.plist [Click for support]
    [running]    com.bjango.istatmenusdaemon.plist [Click for support]
    [running]    com.bombich.ccchelper.plist [Click for support]
    [loaded]    com.torch.update.agent.plist [Click for support]
    [loaded]    net.freemacsoft.LiteIcon.LIHelperTool.plist [Click for support]
User Launch Agents: ℹ️
    [loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
    [loaded]    com.avast.home.userinit.plist [Click for support]
    [loaded]    com.google.keystone.agent.plist [Click for support]
    [failed]    com.jdibackup.ZipCloud.autostart.plist [Click for support]
    [loaded]    com.jdibackup.ZipCloud.backupstart.plist [Click for support]
    [failed]    com.jdibackup.ZipCloud.notify.plist [Click for support]
User Login Items: ℹ️
    Macs Fan Control    Application (/Applications/Macs Fan Control.app)
    Dropbox    Application (/Applications/Dropbox.app)
    Logitech Gaming Software    Application Hidden (/Applications/Logitech/Logitech Gaming Software.app)
Internet Plug-ins: ℹ️
    FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]
    QuickTime Plugin: Version: 7.7.3
    Flash Player: Version: 17.0.0.134 - SDK 10.6 [Click for support]
    Default Browser: Version: 600 - SDK 10.10
    Unity Web Player: Version: UnityPlayer version 4.6.1f1 - SDK 10.6 [Click for support]
    Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
    JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
User internet Plug-ins: ℹ️
    RealPlayer Plugin: Version: Unknown [Click for support]
    Google Earth Web Plug-in: Version: 7.1 [Click for support]
Safari Extensions: ℹ️
    AllMyTube
    GMail Counter
    SPOI Options
    Ultimate Status Bar
    SuperDrag
    Stop/Reload Button
    AdBlock
    YoutubeWide
    Magic Scroll
    ZoomBySite
    AllPagesZoom
    ClickToFlash
Audio Plug-ins: ℹ️
    DVCPROHDAudio: Version: 1.3.2
3rd Party Preference Panes: ℹ️
    Flash Player [Click for support]
    Perian [Click for support]
    Tuxera NTFS [Click for support]
Time Machine: ℹ️
    Time Machine not configured!
Top Processes by CPU: ℹ️
         9%    mds
         5%    WindowServer
         3%    storedownloadd
         3%    MacsFanControl
         2%    com.avast.proxy
Top Processes by Memory: ℹ️
    438 MB    softwareupdated
    292 MB    Safari
    163 MB    com.avast.daemon
    160 MB    com.apple.WebKit.WebContent
    112 MB    iStatMenusDaemon
Virtual Memory Information: ℹ️
    3.28 GB    Free RAM
    3.84 GB    Active RAM
    624 MB    Inactive RAM
    739 MB    Wired RAM
    2.52 GB    Page-ins
    53 MB    Page-outs
Diagnostics Information: ℹ️
    Apr 1, 2015, 02:05:41 PM    Self test - passed
    Apr 1, 2015, 11:51:03 AM    /Library/Logs/DiagnosticReports/com.apple.AmbientDisplayAgent_2015-04-01-115103 _[redacted].crash
    Mar 31, 2015, 04:43:57 PM    /Library/Logs/DiagnosticReports/ntfs-3g_2015-03-31-164357_[redacted].crash
    Mar 31, 2015, 04:39:52 PM    /Library/Logs/DiagnosticReports/ntfs-3g_2015-03-31-163952_[redacted].crash
    Mar 31, 2015, 12:38:13 PM    /Library/Logs/DiagnosticReports/ntfs-3g_2015-03-31-123813_[redacted].crash
    Mar 31, 2015, 04:16:25 AM    /Users/[redacted]/Library/Logs/DiagnosticReports/garcon_2015-03-31-041625_[reda cted].crash
    Mar 31, 2015, 03:06:27 AM    /Library/Logs/DiagnosticReports/com.apple.AmbientDisplayAgent_2015-03-31-030627 _[redacted].crash

My HP Monitor goes to black with some regularity.

I have searched this topic in this forum and on the HP forums. As far back as six years ago, it was a known problem...i.e. monitors, of all brands apparently go black when hooked up to Apple computers. I even read that Apple recognized the problem and was working on a solution (besides simply rolling over and buying an Apple monitor...which does not appear to have this problem). Do any of you know of a solution?? I really like my HP monitor, but sometimes it is very frustrating to be working, and then be interrupted...sometimes several times in a minute.

Hello @Lisa12,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that your computer goest black and you get no signal message on the monitor while watching a movie. I am providing you with an HP Support document: Flat Panel Monitor Displays Message about No Signal, Signal out of Range, Sleep, or Power Save, which wil address the issue you are experiencing.
I hope I have answered your question to your satisfaction. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

External Monitor with iTunes - iMac screen goes black

I have an iMac with iTunes 7.7/Leopard and an external VGA monitor (I use the standard Apple mini-DVI to VGA converter) then I use the external monitor to watch video from my iTunes library.
All works well - I have my desktop spread over both monitors, I fire up a movie from iTunes, move the video window across to the external monitor and everything is good - I can watch the video on the external monitor whilst continuing to work on my Mac - the iMac screen displays the Mac desktop as normal.
However, if I put the movie into fullscreen mode (view -> fullscreen on the iTunes menu), the external monitor displays the movie in fullscreen mode as it should, however the iMac monitor goes black.
The only way to fix this is to exit fullscreen mode and go back to one of the view options (rg fit to screen).
Any ideas how I can have my external monitor in fullscreen mode and have my desktop back?
Many thanks
SM

I have an iMac with iTunes 7.7/Leopard and an external VGA monitor (I use the standard Apple mini-DVI to VGA converter) then I use the external monitor to watch video from my iTunes library.
All works well - I have my desktop spread over both monitors, I fire up a movie from iTunes, move the video window across to the external monitor and everything is good - I can watch the video on the external monitor whilst continuing to work on my Mac - the iMac screen displays the Mac desktop as normal.
However, if I put the movie into fullscreen mode (view -> fullscreen on the iTunes menu), the external monitor displays the movie in fullscreen mode as it should, however the iMac monitor goes black.
The only way to fix this is to exit fullscreen mode and go back to one of the view options (rg fit to screen).
Any ideas how I can have my external monitor in fullscreen mode and have my desktop back?
Many thanks
SM

HP2311x Goes blank/black when connected to my hp Pavilion HPE

Last month, my monitor started to go blank periodically and with increasing frequency. The system setup is:
Windows 7 Home Premium (64 bit)
GeForce GT 530 video card
8 Gb RAM
Intel Core i7-2600 CPU @ 3.40 GHz
I have:
Cleaned the video card
Upgraded to the lastest GeForce driver
Updated the monitor driver
Factory reset the monitor
Changed the connector wire from DVI to HDMI
Connected another monitor to the HP Pavilion (works fine)
Connected the HP 2311x monitor to my Chromebook using HDMI (works fine)
Connected the monitor to my son's laptop (works fine)
The only time that the monitor goes blank/black periodically is when it is connected to the HP Pavilion HPE. A new monitor may solve the problem but as the monitor works with other computers I do not think that it is dead yet.
From the actions of the monitor it seems to switch off and then back on again.
Any ideas as to what to do to fix the issue?

Hello @phil1001,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that your monitor goes black when connected to your desktop computer, and I would be happy to assist you in this matter!
To further diagnose this issue, I recommend following the steps in this document on Monitor or TV is Blank after Starting the Computer. This should help return the video display to your desktop computer through the monitor.
If the issue persists after completing all of the steps indicated in the resource above, please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
I hope this helps!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

I turn my iMac on and it starts ok but after a minute the monitor goes black

I turn my iMac on and it starts ok but after a minute the monitor goes black, sometimes it comes back on sometimes it stays off, this has only happened since Apple replaced the hard drive.

Then, contact the Apple repair station that did the work.

My iMac monitor just goes black

I have a 2009 27inch iMac with an external Samsung monitor.
Out of the blue, the iMAC MONITOR just goes black. Like it went to sleep or something.
This has happened 4 times in the last 2 weeks. (luckily I can restart the computer because the external Samsung still works.
I restart the computer and the monitor works fine again.
Help.
Thanks.

Hi.
Screen goes totally black.
The good news is, I read around and was advised to turn off the computer and unplug it, and plug it back in and start up. That seems to have fixed it. So far, so good.
Thanks.

Running Photoshop CC on iMac w/ 2 monitors. The black application background is stuck to the top left between the 2 monitors, tried resetting workspaces, new workspaces... no joy. I'd just as soon eliminate it as its always in the way. thanks

Running Photoshop CC on iMac w/ 2 monitors. The black application background is stuck to the top left between the 2 monitors, tried resetting workspaces, new workspaces... no joy. I'd just as soon eliminate it as its always in the way. thanks

alright. reformat, no longer have and fan-controlling software running, SMC reset, software update, etc. New, precise test using System Load to add a load to the cpu, Hardware Monitor for the temperatures, and TFMonitor for fan speeds. Running both CPUs at 99.5%*, the CPU fan sped up to just over 1500 rpm (HDD and ODD fans stayed relatively the same), from its resting 1198, with the temperatures maxing out at:
PSU: 176°F (80°C)
CPU Core 1: 164°F (74°C)
CPU Core 2: 171°F (77°C)
System Load and Hardware Monitor (or Temperature monitor) are from: http://ciderhouse.ivory.ne.jp/wp/english/
and TF monitor is from: http://ciderhouse.ivory.ne.jp/wp/english/
Now, to someone with more experience than I, are these numbers within reasonable operating range? And if the CPU fan can go as high as 3300 rpm, why would it not go any higher than half that? (smcFanControl reported 3300 as the max before I reformatted, but after reformatting I can't seem to get it to work)
It just doesn't make sense to me. ....and I'm not fond of the heat radiating off the monitor...
*I tested it up at almost 100% because with the work I do, I often do run around there. From time to time I do 3D renders and video work, and Photoshop almost never closes on my computer.

Mini ppc w/ beachball problem and attached monitor going black frequently

I am seriously considering replacing this mini. I believe as the poster yesterday concluded that the hard drive in this mini is on the verge of quitting. Reference beachball problem everytime any entry is made. I completely reformatted with zero overwrite and slowness was not cured. Drive is only about 30% of capacity. The attached monitor goes black (not to sleep) this will happen while data is being entered periodically many times a day. The monitor behaves perfectly when connected to another mini with same cables. I think there may be a video output problem. This unit is in a high demand area for making appointments, so I think it is time to replace although I don't want to because of software issues. I looked at external firewire comments, but so far I can't find the drives that will support being start up drives and the video out problem is still an issue. I have also thought of bringing my PPC iMac flat screen from home and upgrading at home, but it is 4-5 years old and I don't want to do this again in 6 months. Any comments will be appreciated. Thanks

Have you run the Apple hardware test on it? Or if you have Applecare, the TechTools Deluxe test? To run the Apple hardware test, insert the first OS X disc that came with the system, which should say 'AHT Version x.x' in small print on the label. Reboot, holding the option key down. Choose the Apple hardware test, click the arrow pointing to the right, and follow directions. Does it identify any issues?
If you click the blue Apple, and about this mac, does the memory show what it should be? If there were a memory issue with the RAM strip, where you were only getting reduced memory, that could contribute to the issues you're seeing.
A number of people with slowing systems, with frequent beach balls, have used OnyX to clean up their system, which has made a performance difference. You can get it from http://www.titanium.free.fr/pgs2/english/download.html . Run the activities on the maintenance and cleaning tabs, which may require a reboot. Does that help?
One other thought, which is a stretch ... did you upgrade to 10.4.11 through the software update function or by installing the combo update? If by software update, you might want to download the combo version, and install it after you use OnyX. Repair permissions, install it, and repair permissions again, using Disk Utility. It's located at http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx10411comboupdat eppc.html

IMac freezes while running Adrium

Hello,
I've bought my iMac 27inch i5 at the end of 2009. Right now I experience the issue as if I'm running Adrium on my Mac the HDD goes wild and most of my programs stop running and I only get the spinning rainbow
At the moment I turn of Adrium, everything goes smoothly for a while. I've already used the diagnostic for HDD and it says that there shouldn't be a problem.
I will make some more test, as stressing the HDD, but I would like to know if anyone else has an idea what my problem could be.
kind regards,
teddyofapril

Now I've got some update on my problem.
Today I didn't run Adrium a single time. But while running iWeb'09 I got the same problem. I've started to monitor my HDD via iStat Menubar. The activity bar shows, that my HDD stops working and won't be read or written. After a few seconds 10 to 60 the HDD shows activity again and I can work for some time.
Programs like Safari, Preview or Skype won't cause this problem.
Anyone an idea?

Everytime I go to full-screen mode the photo I am working on is on one space while the filmstrip is on another. Also there is no way to get to the menu on top as it is hidden. When I hit the f key everything goes to black and I have to quite the program.

Everytime I go to full-screen mode the photo I am working on is on one space while the filmstrip is on another. Also there is no way to get to the menu on top as it is hidden. When I hit the f key everything goes to black and I have to quite the program. This is the first time I have any problems with Aperture.
I run aperture 3 on OS X 10.7 iMac 27" 2.8GHz i7 16GB.
Thanks for any help.

You have to change the cursor focus.
What I usually do for PDF pages/tabs, is click in the URL/location bar, then F11.<br />
For Flash, if you click on the page outside of the video area/box, F11 should work.

IMac monitor goes to black while running FCPX

Similar Messages

Maybe you are looking for