IMac not going to standby or screensaver.
My iMac doesn't seem to want to go into standby or screensaver, I've set it to go to screensaver after 5 mins of no use yet I've left it way over an hour and still nothing, restarting has no effect, it still goes to sleep but only if I tell it too.
Whats wrong?
Message was edited by: Onio-n
Ok Reset it, can't say if it worked. Though Dashboard still seems to like to crash when the computer starts... In some way I'm thinking this may be a result of the loud HDD the Mac has, I've heard loud HDDs before but never in a Mac and it does take some time to load certian files on this computer.
Really all I would want is to get the entire Mac replaced as it has too many problems which really annoy me, a dead pixel, buzzing fan, odd fingerprint mark on the screen directly in the centre and a loud HDD which may be on its way out... I'll have to see what Apple says.
Similar Messages
-
For some reason, my imac fails to go to sleep. I must do it manually. I checked the power settings and all seems ok.
Any external devices connected to the iMac (harddisks, scanner, iPhones, Elgato TV, etc.) and not ejected/disconnected ?
Stefan -
Core i7 27" imac not going into 64bit mode
i received my 27" Core i7 when they first shipped. love the machine. that said when i hold the 6 and 4 down at boot it does not go into 64 bit mode. what could be causing this and how could a force it into that mode?
Edit the file:
/Library/Preferences/SystemConfiguration/com.apple.Boot.plist
Insert arch=x86_64 into the Kernel Flags field.
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Kernel</key>
<string>mach_kernel</string>
<key>Kernel Flags</key>
<string>arch=x86_64</string>
</dict>
</plist> -
Solution for: Presario Desktop Computer not automatically going to standby unattended
I would like to offer a solution to a standby problem. I have a Compaq Presario SR2041X with MCE2005. It did not go into standby automatically even when I tried setting the minutes in Control Panel, Power Options.
I tested several combinations and finally found three that do work: First, set "Turn off Monitor after 20 minutes", "Turn off Hard Drive after 30 minutes".
Now I can choose to have it go to "System Standby" in any of these: 1 minute, 2 minutes, 3 minutes, or 30 minutes. NO other settings I have tried so far will work for me. I hope this information helps someone in case they have problems with this. LOL (lots of luck)Hello guys. Same story! My computer sleeps off when am typing. Sometimes it becomes too much and i can hardly type any word. Its very very annoying and it has stressed me because i have much to do. i have checked power settings but looks to be okay. Imagine it has gone to sleep 10 times as i typed this text! i have to keep touching the power button all the time! sometimes i touch any key and it goes on
-
Computer goes on standby and crashes all open windows.
When my computer goes on standby, all open windows (word, chrome, excel) crash and reopen. Word appears with a solid orange or dark yellow. How can I stop this from happening?
It might happen most often when the screen is being projected during the work day.
This problem has only been occuring since I updated to Mavericks a few weeks ago.Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test. -
IMac not recognizing bluetooth nor USB mouse and keyboard
The iMac I use has suffered a pretty annoying problem. I typically use a wireless keyboard and magic mouse with the iMac (I could be wrong, but I believe these both use Bluetooth technology). First, the iMac stopped recognizing these. They kept losing connection last Friday and then suddenly stopped recognizing them at all. Yes, they both have full batteries and blink to show me they are on and searching for the iMac.
Second, I tried using a USB mouse and a USB keyboard to get into the iMac and fix the problem. But neither are recognized by the iMac as well. The mouse is a Dell model that has a red light on the bottom, and it glows red for less than a second when I plug it into the USB port before going dark again and not working. So, I can't get into the iMac to fix the problem.
I've read a few other things on the community boards. I restarted the iMac. I unplugged it completely for several minutes and held down the power button for fifteen seconds while the power was unplugged. I've tried multiple mice and keyboards, all to no effect.
Is the iMac not recognizing the USB keyboard/mouse because it's still searching for the bluetooth versions that it will no longer recognize? Is there a way to fix this without setting up an appointment with the geniuses?
Thanks!I'm having the same problem. It started happening on my Late 2012 model iMac 21.5" after applying the latest update.
What I found was that nothing seemed to work connected directly to the iMac. However, if you attach an externally powered USB hub, then all devices attached to the hub will work. It seems as if the USB ports are still working, but without power.
After I was able to get my USB keyboard to work, I was able to zap the PRAM (hold command-option-P-R while powering on) and then magically everything was back to working again. Unfortunately, this was short lived as the problem has resufaced again for me today, but you could give it a try anyway. -
My 3050 J610 printer goes into standby or sleep mode and then I cannot print docs to it wirelessly
Everytime I do not print something for a few hours, my printer goes into standby or sleep mode. When it does this, it cannot be used to print from my laptop or android to it. Is there a way to set this up so that it doesn't "go to sleep" and it is always available to me to print with. I like the printer, but it seems kind of off that you cannot print on it wirelessly and it is considered a WIRELESS printer. That's the only reason I bought it and now I can't even use it without walking downstairs and turning the printer back on again. If I wanted to do that every time I would just print from my main computer!
Thanks,
Ashley
This question was solved.
View Solution.Ok, I know this thread is a little old, but it would not allow me to start a new one, since I am new. I am having the same issues with my 3050 J610 as everyone else. It makes you think there is a wireless connection problem, but that is not the case. The printer goes into a standby mode and there is no way to bring it out of it, unless you cycle the printer. The panel buttons will still work, you just lose the ability to print wirelessly.
I have had my 3050 J610 in two different rooms, master bedroom and basement office. Both areas work well when it is connected and awake. After a while of inactivity, it goes into standby mode and cannot print wirelessly. Here are steps I have taken so far:
When the printer goes into standby and will not print wirelessly, I have check to make sure there is still a connection between the router and the printer - There is
I have set a static Id for the printer at .210
Cycling the printer brings the connection back instantly.
The front panel buttons work just fine when it does not have connectivity
In the basement, the machine has excellent signal and connection.
I have checked the recommendations in this thread, and like others, there are no options under the advanced tab of the maintenance page. The problem is a standby or sleep issue. When this arises, it has connection to the router, but the wireless computer does not have connection to the machine. I know when it was in the bedroom, the light would blink 3 or 4 times now and then throughout the night. We need a way to turn off the standby, or bring the machine out of standby mode. It is not an issue of the router, channel, interference, or software. It is the sole issue of standby or sleep modes. I have been pulling my hair out for almost two years over this issue. I swore I would not buy another HP product after the problems I had with a printer and laptop. But I thought I would give HP another chance. -
Over the last week I noticed that my iMac was not going to sleep or even would wake up from sleep even after being forced to sleep. Today I logged into the console and saw this:
Oct 31 11:01:56 barnes-fichters-computer-4 com.apple.launchd[1] (com.app4mac.CheckUpAgent[2331]): posix_spawn("/Applications/CheckUp.app/Contents/MacOS/CheckUpAgent", ...): No such file or directory
Oct 31 11:01:56 barnes-fichters-computer-4 com.apple.launchd[1] (com.app4mac.CheckUpAgent[2331]): Exited with exit code: 1
Oct 31 11:01:56 barnes-fichters-computer-4 com.apple.launchd[1] (com.app4mac.CheckUpAgent): Throttling respawn: Will start in 10 seconds
This message repeats itself over and over again... how do I disable the checkupagent from trying to start? I do not have checkup installed on my drive.
Regards,
CharlieHi Charlie
For the sleep/wake problem reset your iMac's SMC as instructed in the first article and then restart holding the (Command-Option-P-R) keys to reset the PRAM, the second article.
http://support.apple.com/kb/HT1543
http://support.apple.com/kb/HT1379
CheckUp or something carrying CheckUpAgent got installed on your iMac and there are several way to remove the Library/LaunchDaemons/com.app4mac.CheckUpAgent.plist.
http://www.app4mac.com/forums/index.php?action=articles;sa=view;article=6
http://tech.karbassi.com/2008/01/03/checkup-how-to-uninstall/
Also see > http://discussions.apple.com/thread.jspa?threadID=2041656&tstart=0
Dennis -
IPhone 4 updated to iOS 6.0.1 goes to standby staus random
Hi all,
since I updated my iPhone 4 to iOS 6.0.1, with 100% full charge, unexpectedly the phone goes into standby status and display battery low + ac/dc plug adapter logos. I restored iPhone as suggested to me the Apple Center but the issue remain. I need help as soon as possible because is unacceptable condition. Any ideas?
Thanks.If this can help someone...
this is the log of my device.
If this can help someone...
this is the log of my device.
==== Attached at 28/01/2013 12:17:48 ====
Jan 28 11:56:49 kernel[0] <Debug>: virtual void AppleRGBOUT::do_power_state_change(): fSoft: 0 fHard: 0 swapBusy: 0 fController: 0 -> 0
Jan 28 11:56:49 kernel[0] <Debug>: 002370.104371 wlan.N[89] AppleBCMWLANCore::setPowerStateGated(): powerState 0, fStateFlags 0x1, dev 0x87bb3000 (this 1, provider 0)
Jan 28 11:56:49 kernel[0] <Debug>: 002370.104500 wlan.N[90] AppleBCMWLANCore::powerOffSystem(): : Powering Off and sleeping
Jan 28 11:56:49 kernel[0] <Debug>: 002370.104570 wlan.N[91] AppleBCMWLANCore::powerOff(): fStateFlags(0)
Jan 28 11:56:49 kernel[0] <Debug>: 002370.104643 wlan.N[92] AppleBCMWLANCore::powerOff(): Ready to power off
Jan 28 11:56:49 kernel[0] <Debug>: 002370.104705 wlan.N[93] AppleBCMWLANBusInterfaceSdio::powerOff(): fStateFlags(00000021)
Jan 28 11:56:49 kernel[0] <Debug>: IO80211VirtualInterface::handleSIOCSIFFLAGS: ( flags & IFF_UP ) = false, _controllerLostPower = 0
Jan 28 11:56:48 kernel[0] <Debug>: pmu wake events: menu
Jan 28 11:57:42 kernel[0] <Debug>: virtual void AppleRGBOUT::do_power_state_change(): fSoft: 0 fHard: 1 swapBusy: 0 fController: 0 -> 0
Jan 28 11:57:42 kernel[0] <Debug>: 002370.653705 wlan.N[94] AppleBCMWLANCore::setPowerStateGated(): powerState 1, fStateFlags 0x0, dev 0x87bb3000 (this 1, provider 0)
Jan 28 11:57:42 kernel[0] <Debug>: 002370.653835 wlan.N[95] AppleBCMWLANCore::powerOnSystem(): : Powering On
Jan 28 11:57:42 kernel[0] <Debug>: 002370.653894 wlan.N[96] AppleBCMWLANCore::powerOn(): stateFlags(1)
Jan 28 11:57:42 kernel[0] <Debug>: 002370.653951 wlan.N[97] AppleBCMWLANBusInterfaceSdio::powerOn(): fStateFlags(00000030)
Jan 28 11:57:42 kernel[0] <Debug>: 002370.654875 wlan.W[98] AppleBCMWLANCore::apple80211Request(): Rejecting ioctl 9, error 82 (state 0x1)
Jan 28 11:57:42 kernel[0] <Debug>: 002370.655151 wlan.W[99] AppleBCMWLANCore::apple80211Request(): Rejecting ioctl 4, error 82 (state 0x1)
Jan 28 11:57:42 kernel[0] <Debug>: IO80211VirtualInterface::handleSIOCSIFFLAGS: ( flags & IFF_UP ) = false, _controllerLostPower = 0
Jan 28 11:57:42 backboardd[52] <Notice>: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
Jan 28 11:57:42 CommCenter[61] <Notice>: Telling CSI to exit low power.
Jan 28 11:57:42 backboardd[52] <Notice>: MultitouchHID: detection mode: 255->0 (deferring until bootloaded)
Jan 28 11:57:42 backboardd[52] <Notice>: MultitouchHID: device bootloaded
Jan 28 11:57:42 backboardd[52] <Notice>: MultitouchHID: detection mode: 0->0
Jan 28 11:57:42 CommCenter[61] <Error>: kDataAttachStatusNotification sent, wasAttached: 1 isAttached: 1
Jan 28 11:57:42 kernel[0] <Debug>: set_crc_notification_state 0
Jan 28 11:57:42 kernel[0] <Debug>: AppleD1815PMUPowerSource: AppleUSBCableDetect 0
Jan 28 11:57:42 kernel[0] <Debug>: AppleD1815PMUPowerSource: AppleUSBCableType Detached
Jan 28 11:57:42 kernel[0] <Debug>: ALS: AppleARMBacklight::handleMessageGated - framebufferState -> 1
Jan 28 11:57:42 kernel[0] <Debug>: ALS: AppleARMBacklight::setBacklightEnableGated 1 (set level to 0x641)
Jan 28 11:57:46 profiled[213] <Notice>: (Note ) profiled: Service starting...
Jan 28 11:57:46 profiled[213] <Notice>: (Note ) profiled: Recomputing passcode requirement message
Jan 28 11:57:49 kernel[0] <Debug>: launchd[215] Builtin profile: syncdefaultsd (sandbox)
Jan 28 11:57:50 CommCenter[61] <Notice>: Client [com.apple.persistentconnection[apsd,74]] is telling PDP context 0 to go active.
Jan 28 11:57:50 CommCenter[61] <Notice>: No more assertions for PDP context 0. Returning it back to normal.
Jan 28 11:57:50 CommCenter[61] <Notice>: Scheduling PDP tear down timer for (381063770.560727) (current time == 381063470.560741)
Jan 28 11:57:50 CommCenter[61] <Notice>: No more assertions for PDP context 0. Returning it back to normal.
Jan 28 11:57:50 CommCenter[61] <Notice>: Scheduling PDP tear down timer for (381063770.626996) (current time == 381063470.627011)
Jan 28 11:57:53 CommCenter[61] <Notice>: Client [com.apple.persistentconnection[apsd,74]] is telling PDP context 0 to go active.
Jan 28 11:58:46 profiled[213] <Notice>: (Note ) profiled: Idled.
Jan 28 11:58:46 profiled[213] <Notice>: (Note ) profiled: Service stopping.
Jan 28 12:01:30 securityd[222] <Error>: OCSPResponse: now > latestNextUpdate
Jan 28 12:01:32 securityd[222] <Error>: OCSPResponse: now > latestNextUpdate
Jan 28 12:01:33 securityd[222] <Error>: OCSPResponse: now > latestNextUpdate
Jan 28 12:01:33 securityd[222] <Error>: OCSPResponse: now > latestNextUpdate
Jan 28 12:01:46 AppStore[224] <Warning>: iTunes Store environment is: NWK
Jan 28 12:01:50 AppStore[224] <Warning>: JS: its.sf6.Bootstrap.init: Initialize
Jan 28 12:01:51 AppStore[224] <Warning>: JS: its.defer.Bootstrap._renderPageComponent: Render Complete
Jan 28 12:01:51 AppStore[224] <Error>: libMobileGestalt copySystemVersionDictionaryValue: Could not lookup ReleaseType from system version dictionary
Jan 28 12:01:54 AppStore[224] <Warning>: JS: [381063714.16], its.image.util: Pending Images Complete
Jan 28 12:01:55 AppStore[224] <Warning>: JS: its.sf6.Bootstrap.init: Initialize
Jan 28 12:01:55 AppStore[224] <Warning>: JS: its.sf6.Bootstrap.init: Initialize
Jan 28 12:01:55 AppStore[224] <Warning>: JS: its.defer.Bootstrap._renderPageComponent: Render Complete
Jan 28 12:01:55 AppStore[224] <Warning>: JS: [381063715.97], its.image.util: Pending Images Complete
Jan 28 12:01:56 AppStore[224] <Warning>: JS: its.defer.Bootstrap._renderPageComponent: Render Complete
Jan 28 12:01:56 AppStore[224] <Warning>: JS: [381063716.71], its.image.util: Pending Images Complete
Jan 28 12:01:57 AppStore[224] <Warning>: JS: [381063717.25], its.image.util: Pending Images Complete
Jan 28 12:02:15 AppStore[224] <Warning>: JS: its.sf6.Bootstrap.init: Initialize
Jan 28 12:02:16 AppStore[224] <Error>: libMobileGestalt copySystemVersionDictionaryValue: Could not lookup ReleaseType from system version dictionary
Jan 28 12:02:18 AppStore[224] <Warning>: JS: its.defer.Bootstrap._renderPageComponent: Render Complete
Jan 28 12:02:22 AppStore[224] <Warning>: JS: [381063742.40], its.image.util: Pending Images Complete
Jan 28 12:02:23 AppStore[224] <Warning>: JS: its.sf6.Bootstrap.init: Initialize
Jan 28 12:02:23 AppStore[224] <Warning>: JS: its.defer.Bootstrap._renderPageComponent: Render Complete
Jan 28 12:02:23 AppStore[224] <Warning>: JS: [381063743.33], its.image.util: Pending Images Complete
Jan 28 12:02:36 CommCenter[61] <Error>: kDataAttachStatusNotification sent, wasAttached: 1 isAttached: 1
Jan 28 12:02:38 backboardd[52] <Notice>: Posting 'com.apple.iokit.hid.displayStatus' notifyState=0
Jan 28 12:02:38 backboardd[52] <Notice>: MultitouchHID: detection mode: 0->255
Jan 28 12:02:38 kernel[0] <Debug>: ALS: AppleARMBacklight::setBacklightEnableGated 0 (set level to 0x1c8)
Jan 28 12:02:38 kernel[0] <Debug>: AppleMultitouchN1SPI: updating power statistics
Jan 28 12:02:38 kernel[0] <Debug>: ALS: AppleARMBacklight::handleMessageGated - framebufferState -> 0
Jan 28 12:02:38 profiled[229] <Notice>: (Note ) profiled: Service starting...
Jan 28 12:02:38 profiled[229] <Notice>: (Note ) profiled: Recomputing passcode requirement message
Jan 28 12:02:47 kernel[0] <Debug>: AppleSerialMultiplexer: mux-ad(eng)::setLinkQualityMetricGated: Setting link quality metric to 100
Jan 28 12:02:53 CommCenter[61] <Notice>: Telling CSI to go low power.
Jan 28 12:02:54 kernel[0] <Debug>: virtual void AppleRGBOUT::do_power_state_change(): fSoft: 0 fHard: 0 swapBusy: 0 fController: 0 -> 0
Jan 28 12:02:54 kernel[0] <Debug>: 002682.202407 wlan.N[100] AppleBCMWLANCore::setPowerStateGated(): powerState 0, fStateFlags 0x1, dev 0x87bb3000 (this 1, provider 0)
Jan 28 12:02:54 kernel[0] <Debug>: 002682.202537 wlan.N[101] AppleBCMWLANCore::powerOffSystem(): : Powering Off and sleeping
Jan 28 12:02:54 kernel[0] <Debug>: 002682.202608 wlan.N[102] AppleBCMWLANCore::powerOff(): fStateFlags(0)
Jan 28 12:02:54 kernel[0] <Debug>: 002682.202684 wlan.N[103] AppleBCMWLANCore::powerOff(): Ready to power off
Jan 28 12:02:54 kernel[0] <Debug>: 002682.202746 wlan.N[104] AppleBCMWLANBusInterfaceSdio::powerOff(): fStateFlags(00000021)
Jan 28 12:02:54 kernel[0] <Debug>: IO80211VirtualInterface::handleSIOCSIFFLAGS: ( flags & IFF_UP ) = false, _controllerLostPower = 0
Jan 28 12:02:53 kernel[0] <Debug>: pmu wake events: baseband
Jan 28 12:03:50 kernel[0] <Debug>: virtual void AppleRGBOUT::do_power_state_change(): fSoft: 0 fHard: 1 swapBusy: 0 fController: 0 -> 0
Jan 28 12:03:50 kernel[0] <Debug>: 002682.736862 wlan.N[105] AppleBCMWLANCore::setPowerStateGated(): powerState 1, fStateFlags 0x0, dev 0x87bb3000 (this 1, provider 0)
Jan 28 12:03:50 kernel[0] <Debug>: 002682.736992 wlan.N[106] AppleBCMWLANCore::powerOnSystem(): : Powering On
Jan 28 12:03:50 kernel[0] <Debug>: 002682.737051 wlan.N[107] AppleBCMWLANCore::powerOn(): stateFlags(1)
Jan 28 12:03:50 kernel[0] <Debug>: 002682.737122 wlan.N[108] AppleBCMWLANBusInterfaceSdio::powerOn(): fStateFlags(00000030)
Jan 28 12:03:50 kernel[0] <Debug>: 002682.738068 wlan.W[109] AppleBCMWLANCore::apple80211Request(): Rejecting ioctl 9, error 82 (state 0x1)
Jan 28 12:03:50 kernel[0] <Debug>: 002682.738373 wlan.W[110] AppleBCMWLANCore::apple80211Request(): Rejecting ioctl 4, error 82 (state 0x1)
Jan 28 12:03:50 kernel[0] <Debug>: IO80211VirtualInterface::handleSIOCSIFFLAGS: ( flags & IFF_UP ) = false, _controllerLostPower = 0
Jan 28 12:03:50 CommCenter[61] <Notice>: Telling CSI to exit low power.
Jan 28 12:03:50 CommCenter[61] <Error>: kDataAttachStatusNotification sent, wasAttached: 1 isAttached: 1
Jan 28 12:03:50 kernel[0] <Debug>: AppleD1815PMUPowerSource: AppleUSBCableDetect 0
Jan 28 12:03:50 kernel[0] <Debug>: AppleD1815PMUPowerSource: AppleUSBCableType Detached
Jan 28 12:03:50 CLTM[13] <Error>: CLTM: resetting temps: now = 1359371030, last update = 1359370969
Jan 28 12:03:55 CommCenter[61] <Notice>: Client [com.apple.persistentconnection[apsd,74]] is telling PDP context 0 to go active.
Jan 28 12:04:02 CommCenter[61] <Notice>: Telling CSI to go low power.
Jan 28 12:04:03 kernel[0] <Debug>: virtual void AppleRGBOUT::do_power_state_change(): fSoft: 0 fHard: 0 swapBusy: 0 fController: 0 -> 0
Jan 28 12:04:03 kernel[0] <Debug>: 002695.377194 wlan.N[111] AppleBCMWLANCore::setPowerStateGated(): powerState 0, fStateFlags 0x1, dev 0x87bb3000 (this 1, provider 0)
Jan 28 12:04:03 kernel[0] <Debug>: 002695.377324 wlan.N[112] AppleBCMWLANCore::powerOffSystem(): : Powering Off and sleeping
Jan 28 12:04:03 kernel[0] <Debug>: 002695.377395 wlan.N[113] AppleBCMWLANCore::powerOff(): fStateFlags(0)
Jan 28 12:04:03 kernel[0] <Debug>: 002695.377469 wlan.N[114] AppleBCMWLANCore::powerOff(): Ready to power off
Jan 28 12:04:03 kernel[0] <Debug>: 002695.377532 wlan.N[115] AppleBCMWLANBusInterfaceSdio::powerOff(): fStateFlags(00000021)
Jan 28 12:04:03 kernel[0] <Debug>: IO80211VirtualInterface::handleSIOCSIFFLAGS: ( flags & IFF_UP ) = false, _controllerLostPower = 0
Jan 28 12:04:02 kernel[0] <Debug>: pmu wake events: baseband
Jan 28 12:04:23 kernel[0] <Debug>: virtual void AppleRGBOUT::do_power_state_change(): fSoft: 0 fHard: 1 swapBusy: 0 fController: 0 -> 0
Jan 28 12:04:23 kernel[0] <Debug>: 002695.906386 wlan.N[116] AppleBCMWLANCore::setPowerStateGated(): powerState 1, fStateFlags 0x0, dev 0x87bb3000 (this 1, provider 0)
Jan 28 12:04:23 kernel[0] <Debug>: 002695.906516 wlan.N[117] AppleBCMWLANCore::powerOnSystem(): : Powering On
Jan 28 12:04:23 kernel[0] <Debug>: 002695.906576 wlan.N[118] AppleBCMWLANCore::powerOn(): stateFlags(1)
Jan 28 12:04:23 kernel[0] <Debug>: 002695.906632 wlan.N[119] AppleBCMWLANBusInterfaceSdio::powerOn(): fStateFlags(00000030)
Jan 28 12:04:23 kernel[0] <Debug>: 002695.907577 wlan.W[120] AppleBCMWLANCore::apple80211Request(): Rejecting ioctl 9, error 82 (state 0x1)
Jan 28 12:04:23 kernel[0] <Debug>: 002695.907853 wlan.W[121] AppleBCMWLANCore::apple80211Request(): Rejecting ioctl 4, error 82 (state 0x1)
Jan 28 12:04:23 kernel[0] <Debug>: IO80211VirtualInterface::handleSIOCSIFFLAGS: ( flags & IFF_UP ) = false, _controllerLostPower = 0
Jan 28 12:04:23 CommCenter[61] <Notice>: Telling CSI to exit low power.
Jan 28 12:04:23 networkd[70] <Error>: opportunistic_interface_ioctl SIOCSIFOPPORTUNISTIC failed: 6 - Device not configured
Jan 28 12:04:23 backboardd[52] <Notice>: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
Jan 28 12:04:23 kernel[0] <Debug>: AppleSerialMultiplexer: mux-ad(eng)::setTrafficCategoryLimitGated: Setting traffic category limit to 0x3
Jan 28 12:04:23 kernel[0] <Debug>: AppleSerialMultiplexer: npio::setTrafficCategoryLimit: changing traffic category limit from 0x4 to 0x3
Jan 28 12:04:23 kernel[0] <Debug>: AppleSerialMultiplexer: npio::setTrafficCategoryLimit: changing traffic category limit from 0x4 to 0x3
Jan 28 12:04:23 kernel[0] <Debug>: AppleSerialMultiplexer: npio::setTrafficCategoryLimit: changing traffic category limit from 0x4 to 0x3
Jan 28 12:04:23 kernel[0] <Debug>: AppleSerialMultiplexer: npio::setTrafficCategoryLimit: changing traffic category limit from 0x4 to 0x3
Jan 28 12:04:23 kernel[0] <Debug>: AppleD1815PMUPowerSource: AppleUSBCableDetect 0
Jan 28 12:04:23 kernel[0] <Debug>: AppleD1815PMUPowerSource: AppleUSBCableType Detached
Jan 28 12:04:23 kernel[0] <Debug>: [HPark] RcMgr::GetFirmware( 'gsm ' 'nb ' ) found in resource ' ' ' '
Jan 28 12:04:23 kernel[0] <Debug>: set_crc_notification_state 0
Jan 28 12:04:23 backboardd[52] <Notice>: MultitouchHID: detection mode: 255->0 (deferring until bootloaded)
Jan 28 12:04:23 CommCenter[61] <Error>: kDataAttachStatusNotification sent, wasAttached: 1 isAttached: 1
Jan 28 12:04:23 backboardd[52] <Notice>: MultitouchHID: device bootloaded
Jan 28 12:04:23 backboardd[52] <Notice>: MultitouchHID: detection mode: 0->0
Jan 28 12:04:24 kernel[0] <Debug>: ALS: AppleARMBacklight::handleMessageGated - framebufferState -> 1
Jan 28 12:04:24 kernel[0] <Debug>: ALS: AppleARMBacklight::setBacklightEnableGated 1 (set level to 0x641)
Jan 28 12:04:29 backboardd[52] <Notice>: Posting 'com.apple.iokit.hid.displayStatus' notifyState=0
Jan 28 12:04:29 kernel[0] <Debug>: ALS: AppleARMBacklight::setBacklightEnableGated 0 (set level to 0x1c8)
Jan 28 12:04:29 backboardd[52] <Notice>: MultitouchHID: detection mode: 0->255
Jan 28 12:04:29 networkd[70] <Error>: opportunistic_interface_ioctl SIOCSIFOPPORTUNISTIC failed: 6 - Device not configured
Jan 28 12:04:30 kernel[0] <Debug>: AppleMultitouchN1SPI: updating power statistics
Jan 28 12:04:30 kernel[0] <Debug>: ALS: AppleARMBacklight::handleMessageGated - framebufferState -> 0
Jan 28 12:04:30 kernel[0] <Debug>: AppleSerialMultiplexer: mux-ad(eng)::setTrafficCategoryLimitGated: Setting traffic category limit to 0x4
Jan 28 12:04:30 kernel[0] <Debug>: AppleSerialMultiplexer: npio::setTrafficCategoryLimit: changing traffic category limit from 0x3 to 0x4
Jan 28 12:04:30 kernel[0] <Debug>: AppleSerialMultiplexer: npio::setTrafficCategoryLimit: changing traffic category limit from 0x3 to 0x4
Jan 28 12:04:30 kernel[0] <Debug>: AppleSerialMultiplexer: npio::setTrafficCategoryLimit: changing traffic category limit from 0x3 to 0x4
Jan 28 12:04:30 kernel[0] <Debug>: AppleSerialMultiplexer: npio::setTrafficCategoryLimit: changing traffic category limit from 0x3 to 0x4
Jan 28 12:04:44 CommCenter[61] <Notice>: Telling CSI to go low power.
Jan 28 12:04:45 kernel[0] <Debug>: virtual void AppleRGBOUT::do_power_state_change(): fSoft: 0 fHard: 0 swapBusy: 0 fController: 0 -> 0
Jan 28 12:04:45 kernel[0] <Debug>: 002717.998626 wlan.N[122] AppleBCMWLANCore::setPowerStateGated(): powerState 0, fStateFlags 0x1, dev 0x87bb3000 (this 1, provider 0)
Jan 28 12:04:45 kernel[0] <Debug>: 002717.998756 wlan.N[123] AppleBCMWLANCore::powerOffSystem(): : Powering Off and sleeping
Jan 28 12:04:45 kernel[0] <Debug>: 002717.998828 wlan.N[124] AppleBCMWLANCore::powerOff(): fStateFlags(0)
Jan 28 12:04:45 kernel[0] <Debug>: 002717.998904 wlan.N[125] AppleBCMWLANCore::powerOff(): Ready to power off
Jan 28 12:04:45 kernel[0] <Debug>: 002717.998966 wlan.N[126] AppleBCMWLANBusInterfaceSdio::powerOff(): fStateFlags(00000021)
Jan 28 12:04:45 kernel[0] <Debug>: IO80211VirtualInterface::handleSIOCSIFFLAGS: ( flags & IFF_UP ) = false, _controllerLostPower = 0
Jan 28 12:04:45 kernel[0] <Debug>: pmu wake events: baseband
Jan 28 12:05:07 kernel[0] <Debug>: virtual void AppleRGBOUT::do_power_state_change(): fSoft: 0 fHard: 1 swapBusy: 0 fController: 0 -> 0
Jan 28 12:05:07 kernel[0] <Debug>: 002718.528701 wlan.N[127] AppleBCMWLANCore::setPowerStateGated(): powerState 1, fStateFlags 0x0, dev 0x87bb3000 (this 1, provider 0)
Jan 28 12:05:07 kernel[0] <Debug>: 002718.528830 wlan.N[128] AppleBCMWLANCore::powerOnSystem(): : Powering On
Jan 28 12:05:07 kernel[0] <Debug>: 002718.528890 wlan.N[129] AppleBCMWLANCore::powerOn(): stateFlags(1)
Jan 28 12:05:07 kernel[0] <Debug>: 002718.528946 wlan.N[130] AppleBCMWLANBusInterfaceSdio::powerOn(): fStateFlags(00000030)
Jan 28 12:05:07 kernel[0] <Debug>: 002718.529873 wlan.W[131] AppleBCMWLANCore::apple80211Request(): Rejecting ioctl 9, error 82 (state 0x1)
Jan 28 12:05:07 kernel[0] <Debug>: 002718.530213 wlan.W[132] AppleBCMWLANCore::apple80211Request(): Rejecting ioctl 4, error 82 (state 0x1)
Jan 28 12:05:07 kernel[0] <Debug>: IO80211VirtualInterface::handleSIOCSIFFLAGS: ( flags & IFF_UP ) = false, _controllerLostPower = 0
Jan 28 12:05:07 CommCenter[61] <Notice>: Telling CSI to exit low power.
Jan 28 12:05:07 kernel[0] <Debug>: AppleD1815PMUPowerSource: AppleUSBCableDetect 0
Jan 28 12:05:07 kernel[0] <Debug>: AppleD1815PMUPowerSource: AppleUSBCableType Detached
Jan 28 12:05:07 CommCenter[61] <Error>: kDataAttachStatusNotification sent, wasAttached: 1 isAttached: 1
Jan 28 12:05:07 CommCenter[61] <Notice>: removing received message 2147483648
Jan 28 12:05:08 backboardd[52] <Notice>: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
Jan 28 12:05:08 kernel[0] <Debug>: set_crc_notification_state 0
Jan 28 12:05:08 backboardd[52] <Notice>: MultitouchHID: detection mode: 255->0 (deferring until bootloaded)
Jan 28 12:05:08 backboardd[52] <Notice>: MultitouchHID: device bootloaded
Jan 28 12:05:08 backboardd[52] <Notice>: MultitouchHID: detection mode: 0->0
Jan 28 12:05:08 kernel[0] <Debug>: ALS: AppleARMBacklight::handleMessageGated - framebufferState -> 1
Jan 28 12:05:08 kernel[0] <Debug>: ALS: AppleARMBacklight::setBacklightEnableGated 1 (set level to 0x641)
Jan 28 12:05:12 backboardd[52] <Notice>: Posting 'com.apple.iokit.hid.displayStatus' notifyState=0
Jan 28 12:05:12 backboardd[52] <Notice>: MultitouchHID: detection mode: 0->255
Jan 28 12:05:12 kernel[0] <Debug>: ALS: AppleARMBacklight::setBacklightEnableGated 0 (set level to 0x1c8)
Jan 28 12:05:12 kernel[0] <Debug>: AppleMultitouchN1SPI: updating power statistics
Jan 28 12:05:12 kernel[0] <Debug>: ALS: AppleARMBacklight::handleMessageGated - framebufferState -> 0
Jan 28 12:05:15 profiled[229] <Notice>: (Note ) profiled: Idled.
Jan 28 12:05:15 profiled[229] <Notice>: (Note ) profiled: Service stopping.
Jan 28 12:05:21 CommCenter[61] <Error>: kDataAttachStatusNotification sent, wasAttached: 1 isAttached: 1
Jan 28 12:05:23 searchd[232] <Warning>: Finished getting 48 applications, took 0.075162 seconds
Jan 28 12:05:24 searchd[232] <Warning>: Indexed all records in 0.38s
Jan 28 12:05:27 CommCenter[61] <Notice>: Telling CSI to go low power.
Jan 28 12:05:27 kernel[0] <Debug>: virtual void AppleRGBOUT::do_power_state_change(): fSoft: 0 fHard: 0 swapBusy: 0 fController: 0 -> 0
Jan 28 12:05:27 kernel[0] <Debug>: 002738.923772 wlan.N[133] AppleBCMWLANCore::setPowerStateGated(): powerState 0, fStateFlags 0x1, dev 0x87bb3000 (this 1, provider 0)
Jan 28 12:05:27 kernel[0] <Debug>: 002738.923903 wlan.N[134] AppleBCMWLANCore::powerOffSystem(): : Powering Off and sleeping
Jan 28 12:05:27 kernel[0] <Debug>: 002738.923974 wlan.N[135] AppleBCMWLANCore::powerOff(): fStateFlags(0)
Jan 28 12:05:27 kernel[0] <Debug>: 002738.924050 wlan.N[136] AppleBCMWLANCore::powerOff(): Ready to power off
Jan 28 12:05:27 kernel[0] <Debug>: 002738.924113 wlan.N[137] AppleBCMWLANBusInterfaceSdio::powerOff(): fStateFlags(00000021)
Jan 28 12:05:27 kernel[0] <Debug>: IO80211VirtualInterface::handleSIOCSIFFLAGS: ( flags & IFF_UP ) = false, _controllerLostPower = 0
Jan 28 12:05:27 kernel[0] <Debug>: pmu wake events: usb
Jan 28 12:11:12 kernel[0] <Debug>: virtual void AppleRGBOUT::do_power_state_change(): fSoft: 0 fHard: 1 swapBusy: 0 fController: 0 -> 0
Jan 28 12:11:12 kernel[0] <Debug>: 002739.459683 wlan.N[138] AppleBCMWLANCore::setPowerStateGated(): powerState 1, fStateFlags 0x0, dev 0x87bb3000 (this 1, provider 0)
Jan 28 12:11:12 kernel[0] <Debug>: 002739.459812 wlan.N[139] AppleBCMWLANCore::powerOnSystem(): : Powering On
Jan 28 12:11:12 kernel[0] <Debug>: 002739.459872 wlan.N[140] AppleBCMWLANCore::powerOn(): stateFlags(1)
Jan 28 12:11:12 kernel[0] <Debug>: 002739.459930 wlan.N[141] AppleBCMWLANBusInterfaceSdio::powerOn(): fStateFlags(00000030)
Jan 28 12:11:12 kernel[0] <Debug>: 002739.460874 wlan.W[142] AppleBCMWLANCore::apple80211Request(): Rejecting ioctl 9, error 82 (state 0x1)
Jan 28 12:11:12 kernel[0] <Debug>: 002739.461150 wlan.W[143] AppleBCMWLANCore::apple80211Request(): Rejecting ioctl 4, error 82 (state 0x1)
Jan 28 12:11:12 kernel[0] <Debug>: IO80211VirtualInterface::handleSIOCSIFFLAGS: ( flags & IFF_UP ) = false, _controllerLostPower = 0
Jan 28 12:11:12 CommCenter[61] <Notice>: Telling CSI to exit low power.
Jan 28 12:11:12 UserEventAgent[13] <Warning>: PLAggregateState Error: Leaving state unplugged_screen_on even though we are not in it, doing nothing
Jan 28 12:11:12 UserEventAgent[13] <Warning>: PLAggregateState Error: Leaving state unplugged_awake even though we are not in it, doing nothing
Jan 28 12:11:12 UserEventAgent[13] <Warning>: PLAggregateState Error: Leaving state pluggedin_screen_on even though we are not in it, doing nothing
Jan 28 12:11:12 CommCenter[61] <Error>: kDataAttachStatusNotification sent, wasAttached: 1 isAttached: 1
Jan 28 12:11:12 timed[17] <Notice>: (Note ) CoreTime: Received timezone "Europe/Rome" from "Location"
Jan 28 12:11:12 timed[17] <Notice>: (Note ) CoreTime: Current mcc: '222' simulated:'0'.
Jan 28 12:11:12 timed[17] <Notice>: (Note ) CoreTime: Not setting time zone to Europe/Rome from Location
Jan 28 12:11:12 kernel[0] <Debug>: AppleD1815PMUPowerSource: AppleUSBCableDetect 1
Jan 28 12:11:12 kernel[0] <Debug>: AppleD1815PMUPowerSource: AppleUSBCableType USBHost
Jan 28 12:11:12 kernel[0] <Debug>: launchd[234] Builtin profile: ptpd (sandbox)
Jan 28 12:11:12 kernel[0] <Debug>: set_crc_notification_state 0
Jan 28 12:11:12 backboardd[52] <Notice>: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
Jan 28 12:11:12 backboardd[52] <Notice>: MultitouchHID: detection mode: 255->0 (deferring until bootloaded)
Jan 28 12:11:12 UserEventAgent[13] <Warning>: PLAggregateState Error: Leaving state unplugged_asleep even though we are not in it, doing nothing
Jan 28 12:11:12 backboardd[52] <Notice>: MultitouchHID: device bootloaded
Jan 28 12:11:12 backboardd[52] <Notice>: MultitouchHID: detection mode: 0->0
Jan 28 12:11:13 kernel[0] <Debug>: ALS: AppleARMBacklight::handleMessageGated - framebufferState -> 1
Jan 28 12:11:13 kernel[0] <Debug>: ALS: AppleARMBacklight::setBacklightEnableGated 1 (set level to 0x641)
Jan 28 12:11:13 ptpd[234] <Error>: ptpd: startResponder
Jan 28 12:11:13 ptpd[234] <Notice>: PTP interface has been activated at high speed.
Jan 28 12:11:16 CLTM[13] <Error>: CLTM: resetting temps: now = 1359371476, last update = 1359371127
Jan 28 12:11:20 backboardd[52] <Notice>: Posting 'com.apple.iokit.hid.displayStatus' notifyState=0
Jan 28 12:11:20 backboardd[52] <Notice>: MultitouchHID: detection mode: 0->255
Jan 28 12:11:20 kernel[0] <Debug>: ALS: AppleARMBacklight::setBacklightEnableGated 0 (set level to 0x1c8)
Jan 28 12:11:20 kernel[0] <Debug>: AppleMultitouchN1SPI: updating power statistics
Jan 28 12:11:20 lockdownd[29] <Notice>: 2ff40000 special_case_get: MGCopyAnswer(kMGQMobileEquipmentIdentifier) returned NULL
Jan 28 12:11:20 timed[17] <Notice>: (Note ) CoreTime: Received time 01/28/2013 11:14:4060.00 from "MobileLockdown"
Jan 28 12:11:20 timed[17] <Notice>: (Note ) CoreTime: Not setting system time to 01/28/2013 11:11:21 from NTP because time is unchanged
Jan 28 12:11:20 timed[17] <Notice>: (Note ) CoreTime: Want active time in -0.00hrs. Need active time in 81.95hrs.
Jan 28 12:11:20 timed[17] <Notice>: (Note ) CoreTime: Received timezone "Europe/Rome" from "MobileLockdown"
Jan 28 12:11:20 timed[17] <Notice>: (Note ) CoreTime: Current mcc: '222' simulated:'0'.
Jan 28 12:11:21 kernel[0] <Debug>: ALS: AppleARMBacklight::handleMessageGated - framebufferState -> 0
Jan 28 12:11:23 backupd[238] <Error>: libMobileGestalt copySystemVersionDictionaryValue: Could not lookup ReleaseType from system version dictionary
Jan 28 12:11:23 backupd[238] <Error>: libMobileGestalt copySystemVersionDictionaryValue: Could not lookup ReleaseType from system version dictionary
Jan 28 12:11:23 lockdownd[29] <Notice>: 2ffc2000 __copy_itunes_value_block_invoke_0:
Jan 28 12:11:23 lockdownd[29] <Notice>: 01482000 special_case_get: MGCopyAnswer(kMGQMobileEquipmentIdentifier) returned NULL
Jan 28 12:11:23 lockdownd[29] <Notice>: 01482000 set_itunes_value: set com.apple.mobile.iTunes.store/Storefront to 143450-7,17 succeeded
Jan 28 12:11:23 lockdownd[29] <Notice>: 01586000 __copy_itunes_value_block_invoke_0: com.apple.mobile.iTunes.store/DSPersonID -> 1302511066
Jan 28 12:11:23 lockdownd[29] <Notice>: 01482000 set_itunes_value: set com.apple.mobile.iTunes.store/DSPersonID to 1302511066 succeeded
Jan 28 12:11:23 lockdownd[29] <Notice>: 01482000 set_itunes_value: set com.apple.mobile.iTunes.store/AppleID to #### succeeded
Jan 28 12:11:23 lockdownd[29] <Notice>: 01482000 set_itunes_value: set com.apple.mobile.iTunes.store/UserName to #### succeeded
Jan 28 12:11:23 lockdownd[29] <Notice>: 01482000 set_itunes_value: set com.apple.mobile.iTunes.store/PreferHQTracks to true succeeded
Jan 28 12:11:23 lockdownd[29] <Notice>: 01482000 set_itunes_value: set com.apple.mobile.iTunes.store/AccountAvailableServiceTypes to 0 succeeded
Jan 28 12:11:25 profiled[240] <Notice>: (Note ) profiled: Service starting...
Jan 28 12:11:31 mobile_assertion_agent[157] <Notice>: service_one_connection: Connection closed for client (null).
Jan 28 12:11:41 mobile_assertion_agent[157] <Notice>: service_one_connection: Connection closed for client (null).
Jan 28 12:11:43 lockdownd[29] <Notice>: 2ff40000 _receive_message: walk away - non-SSL 1
Jan 28 12:12:25 profiled[240] <Notice>: (Note ) profiled: Idled.
Jan 28 12:12:25 profiled[240] <Notice>: (Note ) profiled: Service stopping.
Jan 28 12:12:57 CommCenter[61] <Notice>: Client [com.apple.persistentconnection[apsd,74]] is telling PDP context 0 to go active.
Jan 28 12:14:25 lockdownd[29] <Notice>: 2ff40000 special_case_get: MGCopyAnswer(kMGQMobileEquipmentIdentifier) returned NULL
Jan 28 12:14:26 mobile_installation_proxy[247] <Error>: 0x3b84cb88 MobileInstallationSlowLookupBreak: MobileInstallationBrowse was called without specifying an options dictionary containing kLookupReturnAttributesKey. This usage is inefficient and may cause performance problems. Break on MobileInstallationSlowLookupBreak to debug.
Jan 28 12:14:26 mobile_installation_proxy[247] <Error>: 0x3b84cb88 MobileInstallationSlowLookupBreak: Existing options dictionary: <CFBasicHash 0x1fd832a0 [0x3b276100]>{type = mutable dict, count = 1,
entries =>
6 : <CFString 0x1fd832d0 [0x3b276100]>{contents = "ApplicationType"} = <CFString 0x1fd83240 [0x3b276100]>{contents = "User"}
Jan 28 12:14:27 mc_mobile_tunnel[249] <Notice>: (Note ) MC: mc_mobile_tunnel starting.
Jan 28 12:14:27 mc_mobile_tunnel[249] <Notice>: (Note ) MC: mc_mobile_tunnel shutting down.
Jan 28 12:14:27 mc_mobile_tunnel[250] <Notice>: (Note ) MC: mc_mobile_tunnel starting.
Jan 28 12:14:28 profiled[251] <Notice>: (Note ) profiled: Service starting...
Jan 28 12:14:28 mc_mobile_tunnel[250] <Notice>: (Note ) MC: mc_mobile_tunnel shutting down.
Jan 28 12:14:29 mc_mobile_tunnel[253] <Notice>: (Note ) MC: mc_mobile_tunnel starting.
Jan 28 12:14:29 mc_mobile_tunnel[253] <Notice>: (Note ) MC: mc_mobile_tunnel shutting down.
Jan 28 12:14:31 iPhoneGMC mc_mobile_tunnel[254] <Notice>: (Note ) MC: mc_mobile_tunnel starting.
Jan 28 12:14:31 iPhoneGMC mc_mobile_tunnel[254] <Notice>: (Note ) MC: mc_mobile_tunnel shutting down.
Jan 28 12:15:28 iPhoneGMC profiled[251] <Notice>: (Note ) profiled: Idled.
Jan 28 12:15:28 iPhoneGMC profiled[251] <Notice>: (Note ) profiled: Service stopping.
Jan 28 12:16:08 iPhoneGMC MobileMail[94] <Warning>: ERROR: MFMessageErrorDomain/Command Failed -
Jan 28 12:16:09 iPhoneGMC MobileMail[94] <Warning>: ERROR: MFMessageErrorDomain/Command Failed -
Jan 28 12:16:14 iPhoneGMC backboardd[52] <Notice>: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
Jan 28 12:16:14 iPhoneGMC kernel[0] <Debug>: set_crc_notification_state 0
Jan 28 12:16:14 iPhoneGMC backboardd[52] <Notice>: MultitouchHID: detection mode: 255->0 (deferring until bootloaded)
Jan 28 12:16:14 iPhoneGMC backboardd[52] <Notice>: MultitouchHID: device bootloaded
Jan 28 12:16:14 iPhoneGMC backboardd[52] <Notice>: MultitouchHID: detection mode: 0->0
Jan 28 12:16:14 iPhoneGMC kernel[0] <Debug>: ALS: AppleARMBacklight::handleMessageGated - framebufferState -> 1
Jan 28 12:16:14 iPhoneGMC kernel[0] <Debug>: ALS: AppleARMBacklight::setBacklightEnableGated 1 (set level to 0x641)
Jan 28 12:16:19 iPhoneGMC CommCenter[61] <Error>: kDataAttachStatusNotification sent, wasAttached: 1 isAttached: 1
Jan 28 12:16:29 iPhoneGMC backboardd[52] <Notice>: Posting 'com.apple.iokit.hid.displayStatus' notifyState=0
Jan 28 12:16:29 iPhoneGMC backboardd[52] <Notice>: MultitouchHID: detection mode: 0->255
Jan 28 12:16:29 iPhoneGMC kernel[0] <Debug>: ALS: AppleARMBacklight::setBacklightEnableGated 0 (set level to 0x1c8)
Jan 28 12:16:29 iPhoneGMC kernel[0] <Debug>: AppleMultitouchN1SPI: updating power statistics
Jan 28 12:16:29 iPhoneGMC kernel[0] <Debug>: ALS: AppleARMBacklight::handleMessageGated - framebufferState -> 0
Jan 28 12:16:58 iPhoneGMC CommCenter[61] <Error>: kDataAttachStatusNotification sent, wasAttached: 1 isAttached: 1
Jan 28 12:16:59 iPhoneGMC CommCenter[61] <Error>: kDataAttachStatusNotification sent, wasAttached: 1 isAttached: 1
Jan 28 12:17:05 iPhoneGMC timed[17] <Notice>: (Note ) CoreTime: Received timezone "Europe/Rome" from "Location"
Jan 28 12:17:05 iPhoneGMC timed[17] <Notice>: (Note ) CoreTime: Current mcc: '222' simulated:'0'.
Jan 28 12:17:05 iPhoneGMC timed[17] <Notice>: (Note ) CoreTime: Not setting time zone to Europe/Rome from Location
Jan 28 12:18:42 iPhoneGMC backboardd[52] <Notice>: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
Jan 28 12:18:42 iPhoneGMC kernel[0] <Debug>: set_crc_notification_state 0
Jan 28 12:18:42 iPhoneGMC backboardd[52] <Notice>: MultitouchHID: detection mode: 255->0 (deferring until bootloaded)
Jan 28 12:18:43 iPhoneGMC backboardd[52] <Notice>: MultitouchHID: device bootloaded
Jan 28 12:18:43 iPhoneGMC backboardd[52] <Notice>: MultitouchHID: detection mode: 0->0
Jan 28 12:18:43 iPhoneGMC kernel[0] <Debug>: ALS: AppleARMBacklight::handleMessageGated - framebufferState -> 1
Jan 28 12:18:43 iPhoneGMC kernel[0] <Debug>: ALS: AppleARMBacklight::setBacklightEnableGated 1 (set level to 0x641)
Jan 28 12:18:49 iPhoneGMC kernel[0] <Debug>: ALS: AppleARMBacklight::setBacklightEnableGated 0 (set level to 0x1c8)
Jan 28 12:18:49 iPhoneGMC kernel[0] <Debug>: AppleMultitouchN1SPI: updating power statistics
Jan 28 12:18:49 iPhoneGMC backboardd[52] <Notice>: Posting 'com.apple.iokit.hid.displayStatus' notifyState=0
Jan 28 12:18:49 iPhoneGMC backboardd[52] <Notice>: MultitouchHID: detection mode: 0->255
Jan 28 12:18:49 iPhoneGMC kernel[0] <Debug>: ALS: AppleARMBacklight::handleMessageGated - framebufferState -> 0
Jan 28 12:19:46 iPhoneGMC kernel[0] <Debug>: ttyioss7000002: enqueueData rtn (e00002d7)
Jan 28 12:21:14 iPhoneGMC MobileMail[94] <Warning>: ERROR: MFMessageErrorDomain/Command Failed -
Jan 28 12:22:59 iPhoneGMC CommCenter[61] <Notice>: Client [com.apple.persistentconnection[apsd,74]] is telling PDP context 0 to go active.
Jan 28 12:22:59 iPhoneGMC CommCenter[61] <Notice>: No more assertions for PDP context 0. Returning it back to normal.
Jan 28 12:22:59 iPhoneGMC CommCenter[61] <Notice>: Scheduling PDP tear down timer for (381065279.919405) (current time == 381064979.919420)
Jan 28 12:22:59 iPhoneGMC CommCenter[61] <Notice>: No more assertions for PDP context 0. Returning it back to normal.
Jan 28 12:22:59 iPhoneGMC CommCenter[61] <Notice>: Scheduling PDP tear down timer for (381065279.945779) (current time == 381064979.945793)
Jan 28 12:23:02 iPhoneGMC CommCenter[61] <Notice>: Client [com.apple.persistentconnection[apsd,74]] is telling PDP context 0 to go active.
Jan 28 12:27:45 iPhoneGMC backboardd[52] <Notice>: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
Jan 28 12:27:45 iPhoneGMC kernel[0] <Debug>: set_crc_notification_state 0
Jan 28 12:27:45 iPhoneGMC backboardd[52] <Notice>: MultitouchHID: detection mode: 255->0 (deferring until bootloaded)
Jan 28 12:27:45 iPhoneGMC backboardd[52] <Notice>: MultitouchHID: device bootloaded
Jan 28 12:27:45 iPhoneGMC backboardd[52] <Notice>: MultitouchHID: detection mode: 0->0
Jan 28 12:27:45 iPhoneGMC kernel[0] <Debug>: ALS: AppleARMBacklight::handleMessageGated - framebufferState -> 1
Jan 28 12:27:45 iPhoneGMC kernel[0] <Debug>: ALS: AppleARMBacklight::setBacklightEnableGated 1 (set level to 0x641)
Jan 28 12:27:48 iPhoneGMC profiled[271] <Notice>: (Note ) profiled: Service starting...
Jan 28 12:27:48 iPhoneGMC profiled[271] <Notice>: (Note ) profiled: Recomputing passcode requirement message
Jan 28 12:27:59 iPhoneGMC backboardd[52] <Warning>: CoreAnimation: updates deferred for too long
Jan 28 12:28:00 iPhoneGMC backboardd[52] <Warning>: CoreAnimation: timed out fence 17d47
Jan 28 12:28:00 iPhoneGMC SpringBoard[69] <Warning>: CoreAnimation: failed to receive fence reply: 10004003
Jan 28 12:28:01 iPhoneGMC kernel[0] <Debug>: launchd[276] Builtin profile: syncdefaultsd (sandbox)
Jan 28 12:28:13 iPhoneGMC searchd[278] <Warning>: Finished getting 48 applications, took 0.095611 seconds
Jan 28 12:28:14 iPhoneGMC searchd[278] <Warning>: Indexed all records in 0.20s
Jan 28 12:28:15 iPhoneGMC kernel[0] <Debug>: AppleSerialMultiplexer: mux-ad(eng)::setLinkQualityMetricGated: Setting link quality metric to 50
Jan 28 12:28:23 iPhoneGMC kernel[0] <Debug>: AppleSerialMultiplexer: mux-ad(eng)::setLinkQualityMetricGated: Setting link quality metric to 100
Jan 28 12:28:48 iPhoneGMC profiled[271] <Notice>: (Note ) profiled: Idled.
Jan 28 12:28:48 iPhoneGMC profiled[271] <Notice>: (Note ) profiled: Service stopping.
Jan 28 12:29:19 iPhoneGMC backboardd[52] <Notice>: Posting 'com.apple.iokit.hid.displayStatus' notifyState=0
Jan 28 12:29:19 iPhoneGMC kernel[0] <Debug>: ALS: AppleARMBacklight::setBacklightEnableGated 0 (set level to 0x1c8)
Jan 28 12:29:19 iPhoneGMC kernel[0] <Debug>: AppleMultitouchN1SPI: updating power statistics
Jan 28 12:29:19 iPhoneGMC kernel[0] <Debug>: ALS: AppleARMBacklight::handleMessageGated - framebufferState -> 0
Jan 28 12:29:19 iPhoneGMC backboardd[52] <Notice>: MultitouchHID: detection mode: 0->255
Jan 28 12:29:19 iPhoneGMC profiled[281] <Notice>: (Note ) profiled: Service starting...
Jan 28 12:29:19 iPhoneGMC profiled[281] <Notice>: (Note ) profiled: Recomputing passcode requirement message
Jan 28 12:29:44 iPhoneGMC backboardd[52] <Notice>: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
Jan 28 12:29:44 iPhoneGMC kernel[0] <Debug>: set_crc_notification_state 0
Jan 28 12:29:44 iPhoneGMC backboardd[52] <Notice>: MultitouchHID: detection mode: 255->0 (deferring until bootloaded)
Jan 28 12:29:44 iPhoneGMC backboardd[52] <Notice>: MultitouchHID: device bootloaded
Jan 28 12:29:44 iPhoneGMC backboardd[52] <Notice>: MultitouchHID: detection mode: 0->0
Jan 28 12:29:45 iPhoneGMC kernel[0] <Debug>: ALS: AppleARMBacklight::handleMessageGated - framebufferState -> 1
Jan 28 12:29:45 iPhoneGMC kernel[0] <Debug>: ALS: AppleARMBacklight::setBacklightEnableGated 1 (set level to 0x641)
Jan 28 12:29:47 iPhoneGMC profiled[281] <Notice>: (Note ) profiled: Recomputing passcode requirement message
Jan 28 12:29:57 iPhoneGMC CommCenter[61] <Notice>: Client [com.apple.persistentconnection[apsd,74]] is telling PDP context 0 to go active.
Jan 28 12:30:02 iPhoneGMC backboardd[52] <Notice>: Posting 'com.apple.iokit.hid.displayStatus' notifyState=0
Jan 28 12:30:02 iPhoneGMC backboardd[52] <Notice>: MultitouchHID: detection mode: 0->255
Jan 28 12:30:02 iPhoneGMC kernel[0] <Debug>: ALS: AppleARMBacklight::setBacklightEnableGated 0 (set level to 0x1c8)
Jan 28 12:30:02 iPhoneGMC kernel[0] <Debug>: AppleMultitouchN1SPI: updating power statistics
Jan 28 12:30:02 iPhoneGMC kernel[0] <Debug>: ALS: AppleARMBacklight::handleMessageGated - framebufferState -> 0
Jan 28 12:30:02 iPhoneGMC profiled[281] <Notice>: (Note ) profiled: Recomputing passcode requirement message
Jan 28 12:30:19 iPhoneGMC dataaccessd[84] <Notice>: 0x1e51c2d0|DA|Error|Block: request folder list update (accounts 3E6353DF-DBC4-45FF-9040-61F7FB981A64): error updating folder contents
Jan 28 12:30:19 iPhoneGMC dataaccessd[84] <Notice>: 0x1e51c2d0|DA|Error|Block: request folder list update (accounts 90BA71EC-3F6B-450D-A9DE-D37703A2D501): error updating folder contents
Jan 28 12:31:02 iPhoneGMC profiled[281] <Notice>: (Note ) profiled: Idled.
Jan 28 12:31:02 iPhoneGMC profiled[281] <Notice>: (Note ) profiled: Service stopping.
Jan 28 12:32:32 iPhoneGMC CommCenter[61] <Error>: Activating PDP context 0, because it has assertions and is now available for use.
Jan 28 12:32:32 iPhoneGMC CommCenter[61] <Notice>: Client [(dead conn, pid=875249661[0x3b65fdf4])] is telling PDP context 0 to go active.
Jan 28 12:32:32 iPhoneGMC configd[50] <Notice>: network changed: v4(pdp_ip0-:10.109.130.211) DNS- Proxy
Jan 28 12:32:33 iPhoneGMC CommCenter[61] <Notice>: Client [com.apple.persistentconnection[apsd,74]] is telling PDP context 0 to go active.
Jan 28 12:32:33 iPhoneGMC wifid[14] <Error>: WiFi:[381065553.195761]: Enable WoW requested by "apsd"
Jan 28 12:32:39 iPhoneGMC kernel[0] <Debug>: AppleSerialMultiplexer: nif::ioctl: MTU set to 1450
Jan 28 12:32:39 iPhoneGMC CommCenter[61] <Error>: kPdpContextStateChangeNotification kActive set last_auto_trigger_failed to false
Jan 28 12:32:39 iPhoneGMC CommCenter[61] <Error>: _ReInitThrottleTimer(): Clearing throttle timer on context ID [0] at 381065559.440885
Jan 28 12:32:39 iPhoneGMC configd[50] <Notice>: network changed: v4(pdp_ip0+:10.236.116.129) DNS+ Proxy
Jan 28 12:32:41 iPhoneGMC CommCenter[61] <Notice>: No more assertions for PDP context 0. Returning it back to normal.
Jan 28 12:32:41 iPhoneGMC CommCenter[61] <Notice>: Scheduling PDP tear down timer for (381065861.129847) (current time == 381065561.129873)
Jan 28 12:32:42 iPhoneGMC CommCenter[61] <Notice>: Client [com.apple.persistentconnection[apsd,74]] is telling PDP context 0 to go active.
Jan 28 12:33:40 iPhoneGMC wifid[14] <Error>: WiFi:[381065620.116148]: Disable WoW requested by "apsd"
==== Attached at 28/01/2013 14:24:09 ====
Jan 28 14:20:12 gamed[78] <Info>: 14:20:12.861132 com.apple.AVConference: GKSConnSettings: set server: {
"gk-cdx" = "17.173.254.221:4398";
"gk-commnat-cohort" = "17.173.254.223:16386";
"gk-commnat-main0" = "17.173.254.222:16384";
"gk-commnat-main1" = "17.173.254.222:16385";
Jan 28 14:20:13 backboardd[52] <Notice>: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
Jan 28 14:20:13 lockdownd[29] <Notice>: 39d29b88 determine_activation_state_old: The record contains a wildcard ticket
Jan 28 14:20:13 lockdownd[29] <Notice>: 39d29b88 deliver_baseband_ticket: Issuing activation ticket
Jan 28 14:20:13 locationd[41] <Notice>: Location icon should now be in state 'Inactive'
Jan 28 14:20:13 CLTM[13] <Notice>: CLTM: sensor status logging disabled
Jan 28 14:20:13 CLTM[13] <Notice>: CLTM: updateTGraphLogFile: no tGraph log file, do nothing
Jan 28 14:20:13 CLTM[13] <Notice>: CLTM: updateTGraphLogFile: tGraph logging disabled
Jan 28 14:20:13 CLTM[13] <Notice>: CLTM: Logging last sensor disabled
Jan 28 14:20:13 CLTM[13] <Notice>: CLTM: summary logging disabled
Jan 28 14:20:13 CLTM[13] <Notice>: CLTM: mitigation behavior enabled
Jan 28 14:20:13 CLTM[13] <Notice>: CLTM: Scenario Context enabled
Jan 28 14:20:13 CLTM[13] <Notice>: CLTM: camera equations enabled
Jan 28 14:20:13 CLTM[13] <Notice>: CLTM: thermal monitoring enabled
Jan 28 14:20:13 CLTM[13] <Notice>: CLTM: Raw Value Mode disabled
Jan 28 14:20:13 CLTM[13] <Notice>: CLTM: registered for wake notification
Jan 28 14:20:13 CLTM[13] <Notice>: CLTM: set allowable transmit power limit to 24.000 dBm
Jan 28 14:20:13 CLTM[13] <Notice>: CLTM: Set AppleARMPerformanceControllerDVDFactor0 dithering level to 100%
Jan 28 14:20:13 CLTM[13] <Notice>: CLTM: setting thermal status level to 0 (0) [0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0]
Jan 28 14:20:13 CLTM[13] <Notice>: CLTM: set decay on sensor 0 to 16384
Jan 28 14:20:13 CLTM[13] <Notice>: CLTM: set decay on sensor 1 to 546
Jan 28 14:20:13 CLTM[13] <Notice>: CLTM: set decay on sensor 2 to 655
Jan 28 14:20:13 CLTM[13] <Notice>: CLTM: set decay on sensor 3 to 5461
Jan 28 14:20:13 CLTM[13] <Notice>: CLTM: set decay on sensor 4 to 936
Jan 28 14:20:13 CLTM[13] <Notice>: CLTM: set decay on sensor 5 to 3120
Jan 28 14:20:13 CLTM[13] <Notice>: CLTM: set decay on sensor 6 to 10922
Jan 28 14:20:13 CLTM[13] <Notice>: CLTM: set decay on sensor 7 to 1024
Jan 28 14:20:13 CLTM[13] <Notice>: CLTM: set decay on sensor 8 to 4681
Jan 28 14:20:13 CLTM[13] <Notice>: CLTM: set decay on sensor 10 to 5461
Jan 28 14:20:13 CLTM[13] <Error>: CLTM: Could not close relay file
Jan 28 14:20:13 CLTM[13] <Notice>: CLTM: thermtgraphrelay is not present
Jan 28 14:20:13 lockdownd[29] <Error>: CommCenter couldn't accept this activation ticket
Jan 28 14:20:13 lockdownd[29] <Notice>: 39d29b88 deliver_baseband_ticket: Storing propose activation ticket in the data ark
Jan 28 14:20:13 lockdownd[29] <Notice>: 39d29b88 determine_activation_state_old: The activation state has not changed.
Jan 28 14:20:13 CLTM[13] <Error>: CLTM: could not find Temperature property
Jan 28 14:20:13 CLTM[13] <Error>: CLTM: resetting temps: now = 1359379213, last update = -2147483648
Jan 28 14:20:13 lockdownd[29] <Error>: WiFi: Consulting "no-sdio-devices" property.
Jan 28 14:20:13 lockdownd[29] <Error>: WiFi: "no-sdio-devices" property not found.
Jan 28 14:20:13 lockdownd[29] <Notice>: 39d29b88 notification_worker: now listening for CT notifications
Jan 28 14:20:13 lockdownd[29] <Notice>: 39d29b88 notification_worker: we've registered for notifications, now make sure we didn't miss one...
Jan 28 14:20:13 lockdownd[29] <Notice>: 39d29b88 load_activation_records: Could not extract ICCID from record
Jan 28 14:20:13 lockdownd[29] <Notice>: 39d29b88 load_activation_records: This is a wildcard record
Jan 28 14:20:13 lockdownd[29] <Notice>: 39d29b88 dealwith_activation: No unlock record. Looking for a care flag.
Jan 28 14:20:13 lockdownd[29] <Notice>: 39d29b88 dealwith_activation: No care flag. Looking for a record that matches the SIM.
Jan 28 14:20:13 lockdownd[29] <Notice>: 39d29b88 dealwith_activation: Looking up the record for ICCID 89390100001384176745
Jan 28 14:20:13 lockdownd[29] <Notice>: 39d29b88 dealwith_activation: No record for the SIM. Looking for wildcard.
Jan 28 14:20:13 lockdownd[29] <Notice>: 39d29b88 determine_activation_state_old: This device is a phone. It supports factory activation.
Jan 28 14:20:13 lockdownd[29] <Notice>: 39d29b88 determine_activation_state_old: The original activation state is WildcardActivated
Jan 28 14:20:13 lockdownd[29] <Notice>: 39d29b88 determine_activation_state_old: SIM status: kCTSIMSupportSIMStatusNotReady
Jan 28 14:20:13 lockdownd[29] <Notice>: 39d29b88 determine_activation_state_old: Removing previously issued activation ticket from data ark
Jan 28 14:20:13 lockdownd[29] <Notice>: 39d29b88 determine_activation_state_old: No ICCID in the activation record
Jan 28 14:20:13 lockdownd[29] <Notice>: 39d29b88 determine_activation_state_old: The record contains a wildcard ticket
Jan 28 14:20:13 lockdownd[29] <Notice>: 39d29b88 deliver_baseband_ticket: SIM is not in operator locked state. Ignoring activation ticket
Jan 28 14:20:13 lockdownd[29] <Notice>: 39d29b88 determine_activation_state_old: The activation state has not changed.
Jan 28 14:20:13 kernel[0] <Debug>: AppleSynopsysOTGDevice - Configuration: PTP
Jan 28 14:20:13 kernel[0] <Debug>: AppleSynopsysOTGDevice Interface: PTP
Jan 28 14:20:13 kernel[0] <Debug>: AppleSynopsysOTGDevice - Configuration: iPod USB Interface
Jan 28 14:20:13 kernel[0] <Debug>: AppleSynopsysOTGDevice Interface: USBAudioControl
Jan 28 14:20:13 kernel[0] <Debug>: AppleSynopsysOTGDevice Interface: USBAudioStreaming
Jan 28 14:20:13 kernel[0] <Debug>: AppleSynopsysOTGDevice Interface: IapOverUsbHid
Jan 28 14:20:13 kernel[0] <Debug>: AppleSynopsysOTGDevice - Configuration: PTP + Apple Mobile Device
Jan 28 14:20:13 kernel[0] <Debug>: AppleSynopsysOTGDevice Interface: PTP
Jan 28 14:20:13 kernel[0] <Debug>: AppleSynopsysOTGDevice Interface: AppleUSBMux
Jan 28 14:20:13 kernel[0] <Debug>: AppleSynopsysOTGDevice - Configuration: PTP + Apple Mobile Device + Apple USB Ethernet
Jan 28 14:20:13 kernel[0] <Debug>: AppleSynopsysOTGDevice Interface: PTP
Jan 28 14:20:13 kernel[0] <Debug>: AppleSynopsysOTGDevice Interface: AppleUSBMux
Jan 28 14:20:13 kernel[0] <Debug>: AppleSynopsysOTGDevice Interface: AppleUSBEthernet
Jan 28 14:20:13 kernel[0] <Debug>: AppleSynopsysOTGDevice::gated_registerFunction Register function USBAudioControl
Jan 28 14:20:13 kernel[0] <Debug>: IOAccessoryPortUSB::start
Jan 28 14:20:13 kernel[0] <Debug>: AppleSynopsysOTGDevice::gated_registerFunction Register function IapOverUsbHid
Jan 28 14:20:13 kernel[0] <Debug>: virtual bool AppleUSBDeviceMux::start(IOService *) build: Oct 10 2012 23:54:07
Jan 28 14:20:13 kernel[0] <Debug>: init_waste
Jan 28 14:20:13 kernel[0] <Debug>: AppleSynopsysOTGDevice::gated_registerFunction Register function AppleUSBMux
Jan 28 14:20:13 kernel[0] <Debug>: AppleSynopsysOTGDevice::gated_registerFunction Register function AppleUSBEthernet
Jan 28 14:20:13 kernel[0] <Debug>: AppleSynopsysOTGDevice::gated_registerFunction Register function USBAudioStreaming
Jan 28 14:20:13 kernel[0] <Debug>: AppleUSBEthernetDevice: Ethernet address da:9e:3f:46:76:59
Jan 28 14:20:13 awdd[53] <Error>: libMobileGestalt copySystemVersionDictionaryValue: Could not lookup ReleaseType from system version dictionary
Jan 28 14:20:13 awdd[53] <Error>: CoreLocation: CLClient is deprecated. Will be obsolete soon.
Jan 28 14:20:13 backboardd[52] <Notice>: MultitouchHID: detection mode: 255->0 (deferring until bootloaded)
Jan 28 14:20:13 backboardd[52] <Notice>: void __IOHIDLoadBundles(): Loaded 3 HID plugins
Jan 28 14:20:13 CommCenterMobileHelper[77] <Error>: VM_ALLOCATE 181l (mhs1)
Jan 28 14:20:14 lockdownd[29] <Notice>: 39d29b88 lookup_baseband_info_old: The SIM status has changed
Jan 28 14:20:14 lockdownd[29] <Notice>: 39d29b88 load_activation_records: Could not extract ICCID from record
Jan 28 14:20:14 lockdownd[29] <Notice>: 39d29b88 load_activation_records: This is a wildcard record
Jan 28 14:20:14 lockdownd[29] <Notice>: 39d29b88 dealwith_activation: No unlock record. Looking for a care flag.
Jan 28 14:20:14 lockdownd[29] <Notice>: 39d29b88 dealwith_activation: No care flag. Looking for a record that matches the SIM.
Jan 28 14:20:14 lockdownd[29] <Notice>: 39d29b88 dealwith_activation: Looking up the record for ICCID 89390100001384176745
Jan 28 14:20:14 lockdownd[29] <Notice>: 39d29b88 dealwith_activation: No record for the SIM. Looking for wildcard.
Jan 28 14:20:14 lockdownd[29] <Notice>: 39d29b88 determine_activation_state_old: This device is a phone. It supports factory activation.
Jan 28 14:20:14 lockdownd[29] <Notice>: 39d29b88 determine_activation_state_old: The original activation state is WildcardActivated
Jan 28 14:20:14 lockdownd[29] <Notice>: 39d29b88 determine_activation_state_old: SIM status: kCTSIMSupportSIMStatusReady
Jan 28 14:20:14 lockdownd[29] <Notice>: 39d29b88 determine_activation_state_old: No ICCID in the activation record
Jan 28 14:20:14 lockdownd[29] <Notice>: 39d29b88 determine_activation_state_old: The record contains a wildcard ticket
Jan 28 14:20:14 lockdownd[29] <Notice>: 39d29b88 deliver_baseband_ticket: SIM is not in operator locked state. Ignoring activation ticket
Jan 28 14:20:14 lockdownd[29] <Notice>: 39d29b88 determine_activation_state_old: The activation state has not changed.
Jan 28 14:20:14 locationd[41] <Warning>: Launch Services: Registering unknown app identifier com.apple.locationd failed
Jan 28 14:20:14 locationd[41] <Warning>: Launch Services: Unable to find app identifier com.apple.locationd
Jan 28 14:20:14 locationd[41] <Warning>: Launch Services: Registering unknown app identifier com.apple.locationd failed
Jan 28 14:20:14 locationd[41] <Warning>: Launch Services: Unable to find app identifier com.apple.locationd
Jan 28 14:20:14 locationd[41] <Warning>: Launch Services: Registering unknown app identifier com.apple.locationd failed
Jan 28 14:20:14 locationd[41] <Warning>: Launch Services: Unable to find app identifier com.apple.locationd
Jan 28 14:20:14 locationd[41] <Warning>: Launch Services: Registering unknown app identifier com.apple.locationd failed
Jan 28 14:20:14 locationd[41] <Warning>: Launch Services: Unable to find app identifier com.apple.locationd
Jan 28 14:20:14 locationd[41] <Warning>: Launch Services: Registering unknown app identifier com.apple.locationd failed
Jan 28 14:20:14 locationd[41] <Warning>: Launch Services: Unable to find app identifier com.apple.locationd
Jan 28 14:20:14 locationd[41] <Warning>: Launch Services: Registering unknown app identifier com.apple.locationd failed
Jan 28 14:20:14 locationd[41] <Warning>: Launch Services: Unable to find app identifier com.apple.locationd
Jan 28 14:20:14 locationd[41] <Warning>: Launch Services: Registering unknown app identifier com.apple.locationd failed
Jan 28 14:20:14 locationd[41] <Warning>: Launch Services: Unable to find app identifier com.apple.locationd
Jan 28 14:20:14 locationd[41] <Warning>: Launch Services: Registering unknown app identifier com.apple.locationd failed
Jan 28 14:20:14 locationd[41] <Warning>: Launch Services: Unable to find app identifier com.apple.locationd
Jan 28 14:20:14 UserEventAgent[13] <Warning>: Factory called
Jan 28 14:20:14 UserEventAgent[13] <Notice>: (Note ) PIH: MCUEAPlugin initialized.
Jan 28 14:20:14 UserEventAgent[13] <Error>: Querying interface
Jan 28 14:20:14 UserEventAgent[13] <Error>: libMobileGestalt copySystemVersionDictionaryValue: Could not lookup ReleaseType from system version dictionary
Jan 28 14:20:15 backboardd[52] <Notice>: ALS: open: legacy auto brightness plugin _plugInEnabled=true
Jan 28 14:20:15 backboardd[52] <Notice>: HID: Display IOHIDDisplaySetProperty: LogLevel = 6
Jan 28 14:20:15 backboardd[52] <Error>: libMobileGestalt copySystemVersionDictionaryValue: Could not lookup ReleaseType from system version dictionary
Jan 28 14:20:15 UserEventAgent[13] <Warning>: PLAggregateState Error: Leaving state pluggedin_screen_off even though we are not in it, doing nothing
Jan 28 14:20:15 UserEventAgent[13] <Warning>: PLAggregateState Error: Entering state pluggedin_screen_on even though we are already in it, doing nothing
Jan 28 14:20:15 wifid[14] <Error>: WiFi:[381072015.555829]: Disable WoW requested by "UserEventAgent"
Jan 28 14:20:15 profiled[84] <Notice>: (Note ) profiled: Service starting...
Jan 28 14:20:15 profiled[84] <Notice>: (Note ) profiled: Performing boot time checks.
Jan 28 14:20:15 profiled[84] <Notice>: (Note ) MC: Checking for MDM installation...
Jan 28 14:20:15 profiled[84] <Notice>: (Note ) MC: ...finished checking for MDM installation.
Jan 28 14:20:16 UserEventAgent[13] <Notice>: (Note ) PIH: SIM is now ready.
Jan 28 14:20:16 kernel[0] <Debug>: launchd[85] Builtin profile: dataaccessd (sandbox)
Jan 28 14:20:16 profiled[84] <Notice>: (Note ) profiled: Checking for new carrier profile...
Jan 28 14:20:16 profiled[84] <Notice>: (Error) MC: Failed to parse profile data. Error: NSError:
Desc : Profilo non valido
US Desc: Invalid Profile
Domain : MCProfileErrorDomain
Code : 1000
Type : MCFatalError
Jan 28 14:20:16 profiled[84] <Notice>: (Note ) profiled: No configuration profile found in carrier bundle.
Jan 28 14:20:17 backboardd[52] <Warning>: -[BKSystemAppSentinel lock_bootstrapEmbedded]: Telling the system app that it can start
Jan 28 14:20:17 timed[17] <Notice>: (Note ) CoreTime: Received source available from "Location"
Jan 28 14:20:17 timed[17] <Notice>: (Note ) CoreTime: Received source available from "Location"
Jan 28 14:20:17 locationd[41] <Warning>: Launch Services: Registering unknown app identifier com.apple.locationd failed
Jan 28 14:20:17 locationd[41] <Warning>: Launch Services: Unable to find app identifier com.apple.locationd
Jan 28 14:20:18 distnoted[87] <Warning>: # distnote server daemon absolute time: 1.035069160 civil time: Mon Jan 28 14:20:17 2013 pid: 87 uid: 0 root: yes
Jan 28 14:20:20 hpfd[45] <Notice>: resource request { 'N90 ', ' ' }
Jan 28 14:20:20 com.apple.launchd[1] <Notice>: (com.apple.aslmanager) Job failed to exec(3). Setting up event to tell us when to try again: 2: No such file or directory
Jan 28 14:20:20 com.apple.launchd[1] <Notice>: (com.apple.aslmanager) Job failed to exec(3) for weird reason: 2
Jan 28 14:20:21 com.apple.launchd[1] <Notice>: (com.apple.BlueTool) Idle-exit job exited while dirty. Will respawn.
Jan 28 14:20:21 com.apple.launchd[1] <Error>: (com.apple.BlueTool) Exited with code: 1
Jan 28 14:20:21 kernel[0] <Debug>: launchd[89] Builtin profile: BlueTool (sandbox)
Jan 28 14:20:21 hpfd[45] <Notice>: Firmware resource loaded { ' ' ' ' }
Jan 28 14:20:21 SpringBoard[66] <Warning>: ERROR: _xpc_handle_outgoing_request error: Connection invalid
Jan 28 14:20:21 CommCenter[61] <Error>: kDataAttachStatusNotification sent, wasAttached: 0 isAttached: 1
Jan 28 14:20:21 kernel[0] <Debug>: [HPark] RcMgr::AddFirmware() {' ', ' '} added to resources
Jan 28 14:20:21 ptpd[16] <Error>: ptpd: startResponder
Jan 28 14:20:21 configd[50] <Notice>: network changed.
Jan 28 14:20:21 prdaily[19] <Warning>: BTA job doesn't exist
Jan 28 14:20:21 SpringBoard[66] <Error>: WiFi: Consulting "no-sdio-devices" property.
Jan 28 14:20:21 SpringBoard[66] <Error>: WiFi: "no-sdio-devices" property not found.
Jan 28 14:20:21 SpringBoard[66] <Warning>: lockdown says the device is: [WildcardActivated], state is 3
Jan 28 14:20:21 SpringBoard[66] <Warning>: lockdown says we've previously registered: [1], state is 1
Jan 28 14:20:22 CommCenter[61] <Error>: _ReInitThrottleTimer(): Clearing throttle timer on context ID [0] at 381072022.135215
Jan 28 14:20:22 CommCenter[61] <Error>: _ReInitThrottleTimer(): Clearing throttle timer on context ID [0x1] at 381072022.145519
Jan 28 14:20:22 CommCenter[61] <Error>: _ReInitThrottleTimer(): Clearing throttle timer on context ID [0x2] at 381072022.221736
Jan 28 14:20:22 CommCenter[61] <Error>: _ReInitThrottleTimer(): Clearing throttle timer on context ID [0x3] at 381072022.242252
Jan 28 14:20:22 CommCenter[61] <Error>: kNewServingNetwork sent, MCC: 222 MNC: 1
Jan 28 14:20:23 kernel[0] <Debug>: AppleSerialMultiplexer: mux-ad(eng)::setLinkQualityMetricGated: Setting link quality metric to 100
Jan 28 14:20:24 imagent[43] <Error>: mms: ***** isMmsConfigured = 1
Jan 28 14:20:24 locationd[41] <Notice>: NETWORK: requery, 1, 0, 0, 0, items, fQueryRetries, 0, fLastRetryTimestamp, 0.0
Jan 28 14:20:24 locationd[41] <Notice>: NETWORK: query, cells, 1, 0, 0, wifis, 0
Jan 28 14:20:24 CommCenter[61] <Notice>: Carrier bundle value for recipient address: +447860015007
Jan 28 14:20:25 CommCenter[61] <Notice>: Client [com.apple.networkd.sync] is telling PDP context 0 to go active.
Jan 28 14:20:25 locationd[41] <Notice>: Potentially setting system time zone to Europe/Rome
Jan 28 14:20:25 timed[17] <Notice>: (Note ) CoreTime: Received timezone "Europe/Rome" from "Location"
Jan 28 14:20:25 timed[17] <Notice>: (Note ) CoreTime: Current mcc: '222' simulated:'0'.
Jan 28 14:20:25 timed[17] <Notice>: (Note ) CoreTime: Not setting time zone to Europe/Rome from Location
Jan 28 14:20:25 prdaily[19] <Warning>: Woke up before 30.000000 seconds from due time, so not resetting planned wake up time
Jan 28 14:20:25 kernel[0] <Debug>: AppleMultitouchN1SPI: downloaded 256 bytes of calibration data ("built-in")
Jan 28 14:20:25 backboardd[52] <Notice>: MultitouchHID: device bootloaded
Jan 28 14:20:25 backboardd[52] <Notice>: MultitouchHID: detection mode: 0-> -
Imac not starting up, keep getting white screen. Using snow leopard. Able to get to disk utilities with snow leopard installation disk. Tap on had disk, not given choice to certified disk or anything else. Information on disk states that smart status is certified. Partition map I formatted. Also tried to restore from back up, but get error: not enough disk space. Tried to erase disk, but unable. What do I do next to get mac to start up?
Thank you. That's what I thought will need to happen.
One more question. I tried using the Apple install disk that came with the computer. It's an OS 10.5.6 disk. It does not see my 10.6.8 system internal hard drive to repair. All it see's is itself 10.5.6 disk. Do you think I can use a 10.8+ disk utillity since that is a higher system it will see the 10.6.8. Where the 10.5.6 does not?
I don't want to turn the computer off for fear I'll get the question mark again. P-Ram got me going last time but for how long I don't know? It would be nice to be able to turn the computer off for the night and startup as usual to give it a rest and try to reset itself.
Thanks for your help, I know I will eventually need to re-install. But I am in the middle of a project with tight deadlines and all I can do right now is back-up. Trying to migrate to another computer temporarily to finish the job. That's a lot of extra work in the short time also.
Just trying to put a band-aid on it for another couple weeks. -
HT1586 is there a way to turn off my apple tv not going to stand by mode
is there a way to turn off my apple tv not going to stand by mode
The Apple TV will go into standby mode. You would have to unplug it for it. The device uses very little power so there shouldn't be a need to do this.
-
Prevent iphone 3G gps/maps from going on standby
Just asking because I can't believe this essential feature is not available; I can't find the setting to tell Maps to prevent the iPhone 3G from going into Standby whilst the app is active and running. Obviously if you're in the car trying to use Maps for GPS navigation, you have to keep tapping the screen to keep the phone from standing by. It's a smooth and brilliant app, but for the purposes of navigation this renders it somewhere between very frustrating and completely useless. I'm just hoping I've missed the option somewhere, as it's disappointing to think that so much attention to detail has gone into this phone only to find the blindingly obvious has been omitted. Same for things like a hide keyboard button in some of the default apps (ie SMS). It's just.... missing.
I know I can just turn off automatic standby in the iPhone settings, but that's a poor solution! Is there an option to disallow auto standby for Maps, and if not, how can we lobby/submit suggestions for it to be included in the next firmware update?? Being able to keep the backlight from dimming would make sense as well.The Maps program is not designed for turn-by-turn in motion directions, like a Garmin, etc.
As you know, you can set the Auto lock to never, which would accomplish what you want.
You may leave feedback for Apple at:
http://www.apple.com/feedback/iphone.html -
MBP 2011 wakes up and goes to standby again
If i open my macbook pro 2011, it gets bright and everything seems to be fine but then it goes to standby again. If i shut and open it again, its possible that it works but the chance is less than 50% i think. So how do i open it and tell it that it has to start working???
If there is no 10.5.3 problem with most MacBook Pro owners, then there is obviously something different about your hardware. It may be a particular combination of components, or it could be a component that is +just slightly+ off specs. It is possible that Apple may be able to fix your problem with software or firmware, but there IS something different with your hardware compared to most MacBook Pro's out there (based on what you have already done to trouble-shoot).
But it doesn't really matter. IF your MacBook is still under warranty or under AppleCare, Apple is obligated to make it work properly. Not sleeping is a significant deficiency, and it is a readily reproducible problem. Apple can (1) figure out and fix the issue through software, (2) find the hardware issue that is causing the problem and fix it, or (3) replace your MacBook Pro with one that does not have this problem.
So if you still have time on your warranty, I would be proactive and insist that Apple fix the problem. The reason for the issue is not important. Waiting for an OS fix is not the best course of action, in my opinion. It may not even be a software problem... -
Satellite P10 automatically goes into Standby after 15 minutes
My Satellite P10 automatically goes into Standby after 15 minutes. This is a setting that is controlled by the Toshiba Power Management settings, or the Toshiba Console.
When I change the settings there the system still goes into Standby after 15 minutes. When I go to Control Panel/Performance and Maintenance/Power Options, it tells me to go to the Toshiba Power Management to change the settings, but I can still see the settings in grey stating 15 minutes standby time.
But in the Toshiba Power Management I can't seem to be able to ajust Standby settings so that they actually work. There must be a trick to it..
Can anyone help me figure it out?
Thanks a lot,
LerakThank you for your replies. As I now understand it there are 3 power management utilities fighting for control of the power management settings:
1) The windows OS power options("Power Option Properties, from the control panel/performance and maintenance/power options);
this utility is overridden by:
2) Toshiba Power management;
and
3) the "power save modes", activated by pressing the Function key and the F2 key, which in turn can override the Toshiba Power management.
If this last Function/F2 combination is used to change the power save modes, the windows OS power settings (which are shown in grey and cannot be changed because this is overridden by the Toshiba Power management) DO actually change.
Hold down the Function key (Fn) and press F2, holding down the Fn key. Each time you then press the F2 key again you scroll down the different "Power Schemes". The last mode is called: Toshiba Power Management. One would think that by choosing this setting the Toshiba Power management utility would effectively take over control of the power settings. Unfortunately this does not seem to be the case..
At least using this last option provides a workaround. Some of the "Power Schemes" disable the standby options. -
[XFCE4] How to lock screen before going to standby?
Hello,
I use the "standby" button in the logout menu of XFCE. However when I come back from standby I'm not getting prompted for a password. I looked at all the configuration menu but don't find the option.
Is there an easy way to force xlock before going to standby or after coming back from standby?
Thanks
AlphazoHi,
There is no a Group Policy to lock the Screen Resolution, but you may try to )disable the Control Panel/Display component which will disable changing any display options, including the Screen Resolution.
Open the Group Policy editor and navigate to User Configuration/Administrative templates/Control Panel/Display. Enable the Disable the Display Control panel policy.
When this component is opened, it will show the "Some items have been disabled by the Administrator".
Maybe you are looking for
-
Creation of multiple orders under one main order
Dear Ajay , Sir, I want to create a main AUC order suppose as 10004, How to create Sub-AUC orders under the Main AUC (10004) as below, order:100041: Bldg. and construction exp order:100042:Mfg. machineries cost order:100043:Galvinizing machinery c
-
Hello, I am facing one problem when i am uploading data in HR Cube Qualification (0PAPD_C01). When i am uploading from R3 to BW it is giving 0 records. Also it is giving green signal. But in my R3 extractor, 7,350 records is available. Same connectio
-
I successfully created a tabular update form. I set the length of the popup_from_lov to length of 60, but the maxlength of the editable area never increases past 20. This also occurs for popup_from_query. I looked at the html source and its maxlength
-
System form loadable in Screen Painter ?
Hello, is it possible, in some way to load one of the system form in screen painter? How? Thank you
-
Hi. I need some help. I created a webpage in CS3 Dreamweaver. The problem is that my pictures and flash content are misaligned when I access my webpage from another computer screen other than the one I used when I designed the web page. Seems like my