IMac not retrieving email when asleep

Before I installed Mountail Lion on my iMac, my email would come in throughout the night when the computer was asleep. After installing Mountain Lion, this isn't happening anymore (I know this idea was supposed to work with Power Nap on laptops, but it's working the reverse way on my iMac). Any ideas what might be happening?
thanks,
Allen

Check the setting in System Preferences[Energy Saver]-Computer Sleep.
You want it set to never.

Similar Messages

DROID X DOES NOT RETRIEVE EMAIL UNLESS POWERED OFF, THEN ON

I've identified through testing and confirmed that my 3 day old Droid X does NOT actually retrieve email from a third party (non Google) mail server WITHOUT having to power it down, then back up first. Activating the cute little manual retrieving spinning circle, in fact, does NOTHING.
I have tested this a MILLION times after not getting emails. MANUAL or SCHEDULED settings absolutely do not work.
I REPEAT, I do not receive email unless powered off then on
I set the the following to no avail:
* battery profile to "Performance"
* Data Delivery settings to "Background data" enabled
* Data roaming to enabled
* Email and Corporate Synch settings/Email delivery settings "Data Push" to enabled
* "Fetch Schedule" to EITHER "15 minutes" or "manual" (either of which shouldn't matter if Data Push is enabeled)
* Sync over WI-FI Only is disabled
Not retrieving email is critical to my business- I use a device for email more than I talk to anyone.
This constitutes a breech of service unless it is immediately rectified.
My Droid X was delivered as the following;
Version 1.13.604.MB810.Verizon.en.US
Firmware 2.1-update-1
Baseband Version BP_C_01.04P
Kernel Version 2.6.29 w30471@il93lnxdroid08 #1
Build Number VZW
ERI Version 5
PRL Version 51926

DincX110 wrote:
I Have had this Happen more than once Now i'll Be using my Wi-Fi Then when i shut it off on the X it does not want to Re- Connect with the Network at all. An i'm wondering if its beacause of a setting that i may have it on or maybee an App. Causing this issue
Has any one experienced this on there X
Now when i shut the X off an do the restart it's back on.
I don't use WiFi very often (work doesn't allow non work computers to connect, and at home I use my laptop), but I find at work that my phone sometimes doesn't want to connect to the Network when I walk into the building from the parking ramp (very spotty service on the ramp).
What I do to correct this without restarting, I turn on 'airplane' mode until I see the little airplane in the notification bar, then turn airplane mode off. Within a minute, the network is reconnected and working in 3g just fine.
Location is also part of the problem. I work on the first floor of the building. They are doing remodeling on my floor right now, so I am now on the top floor and have not had this happen since the move a month ago. Since my floor is below a hill with another building on top of the hill between my normal location and the closest tower, the line of sight is hidden, so I expect small problem with it. It doesn't happen all the time, but I do notice it when I try to run internet radio at work.

When I had my old blackberry connected to my computer, all incoming emails were routed to my outlook so I did not get mails on my blackberry. How do I get it so my iphone4 does not receive emails when connected to my computer?

I am getting my iphone inbox bombarded so would like it to not receive emails when connected to my computer. My old blackberry had an app that took care of this which worked really well. Am wondering if I can do the same with my iphone4.

Blackberries were/are able to do that with some types of e-mail accounts because the mail is routed to an intermediary (BlackBerry Service).
There is no equivalent for the iPhone as the phone communicates directly with the mail servers and does not go through a 3rd party.

What is going on with POP email? I can NOT retrieve email unless...

What is going on with POP email? I can NOT retrieve email unless*...I reboot AND reset!* I POP 3 Comcast emails and my own URL email. Never any problems on Entourage. Hourly issues with my new iPhone—and it's only been 4 days.
This is *unbelievably frustrating* and negates why I got the dang thing in the first place.
Does anyone have a work around? Is this a known bug (Apple) or am I missing something?
+*Plus as a side note I think there are too many clicks into the In Box. Just a usability thing I wish I could set myself.+
Message was edited by: sukibean

I have the same problem intermittently... Every so often, the iPhone goes into a mode where email just doesn't work until i shut down and reboot... Then it works fine...
Its not always the case, but I can't isolate the scenario which causes it to go into this weird mode...

My Iphone 4 will not receive email when connected to wifi,works fine on 3G

My Iphone will not receive emails when connected to wifi,works perfect on 3G

Arrr I have this prob to and this has been driving me made i thought it was a network area have changed providers brought different sim cards to get new numbers deleted everything off my iphone to reset it and still no luck..
After reading your comment it has actually been since I have updated my phone.
I have to turn off my phone everyday as I fly and i need to recieve messages when my phone is turned on if this isnt resolved quickly I am going to have to switch from Apple but I dont want to...
Apple can you please advise if this is going to be sorted asap? Alot of people dont turn there phones off all of the time so wont notice however for those of us that do and have to this is a really HUGE ERROR that needs your QUICKEST ATTENTION !
Thanks ;-D

My iPhone will not send emails when away from my home wifi

my iphone will not send emails when away from home wifi any advice

Hey craggee,
Thanks for the question. This is usually do to a limitation by your ISP/email provider:
If you are only able to use your email account while connected to your home network, this may be a limitation put in place by your email service provider. For further support, please contact your email service provider directly.
iOS: Troubleshooting Mail
http://support.apple.com/kb/TS3899
Thanks,
Matt M.

Can send but not retrieve emails using Thunderbird and Windows 8.1

Hi, I am not able to get Thunderbird to retrieve emails on a new laptop.
Last week I purchased a new laptop due to an imminent hard disk failure on my old laptop. I will call them "Old" and "New" laptops. (Old laptop is still working for the moment...)
The Old laptop is nearly 3 years old, and I have been using Thunderbird on it since new without any problems.
I have downloaded and installed Thunderbird on the New laptop, and can not get it to retrieve emails.
As the Old laptop is still working (at the moment), I am able to directly visually compare and check settings on both computers.
THE PROBLEM
Using Thunderbird on the New laptop, I am able to send emails, I can see all my old emails restored from the Old laptop using Mozbackup, but clicking Get Mail on the New laptop does not retrieve new
emails.
When I click Get Mail, the status message in the bottom left corner says "connected to .....<ISP>..." but does not actually get the emails. However, the Old laptop is still able to get emails as it always has.
My ISP is a large Australian telco that I have used for many years and I have not changed anything with my account. The ISP is POP3.
WHAT HAVE I TRIED
I deleted the email account created by restoring from Mozbackup, and attempted using the Thunderbird new account wizard, however Thunderbird did not recognise my ISP and would not create the account - even though it is working perfectly at the same time on the Old laptop.
All Firewalls I can find have been configured to allow Thunderbird, with the same configuration settings on both machines.
How do I know I can send but not Get emails from Thunderbird on the New laptop?
I have sent test emails to myself from the New laptop. Thunderbird sends successfully, I am able to preview the test emails via Mailwasher on the New laptop, and can read, reply, etc, to the emails if I log into my ISP webmail service. However I can NOT get Thunderbird to retrieve and download these emails on the New laptop. If I go to the Old laptop, Thunderbird works perfectly, retrieves and downloads all new emails, including these test emails.
I am now at the point where I do not know what else to try and would appreciate any suggestions.....
I have spent many hours over the last 3 days surfing the net, forums, Mozilla Support, etc, and tried everything suggested, without success. The only thing I have NOT tried is starting windows in Safe mode (as per some suggestions), as it is not a viable long term solution.
OTHER INFO
Computer Details;-
"Old" laptop;-
Windows 7 Home Premium - continuously updated with all Critical and Important updates. 64 bit version.
Antivirus = Bitdefender Total Security (subscription and licensed). Up to date.
MailwasherPro 2012 (subscription and licensed). Up to date.
Thunderbird 24.5.0 working perfectly. Up to date.
"New" laptop;-
Windows 8.1 - up to date with all Critical and Important updates. 64 bit version.
Antivirus = Bitdefender Total Security (subscription and licensed) - downloaded and installed. Up to date.
MailwasherPro 2012 (subscription and licensed) - downloaded and installed. Up to date.
Thunderbird 24.5.0 - downloaded and installed.
Note: I 'downloaded and installed' the Windows 8.1 version of these programs to avoid any potential compatibility problems restoring or copying from a Windows 7 backup version of the programs.
1) New laptop came with pre-installed with McAfee - which has been Uninstalled due to running Bitdefender (Windows searches for 'McAfee' return nothing found suggesting the Uninstall was successful).
2) Thunderbird has been added to both Bitdefender and Windows 8.1 firewalls on the New laptop.
3) Bitdefender and Windows security settings are identical on both laptops - as near as I can determine, I may be missing something - but have checked all settings 3 times by doing a side-by-side visual comparison.
4) Thunderbird settings are also identical and I am using the same email address and ISP that I have been using for many years.
5) I migrated Thunderbird settings, accounts and emails from the Old laptop to the New laptop using Mozbackup, then visually checked and compared all settings in Thunderbird between the two machines.
6) For info, I have used Mailwasher for many years as a simple way to preview and wash mail before running email programs such as Thunderbird - might be overkill, but I have also never had a virus or malware problem, so will keep doing this.
7) I have Uninstalled and re-installed Thunderbird on the New laptop twice, and done the same with Bitdefender once.
8) Any config changes I try on the New laptop, I either restart Thunderbird and / or restart the New laptop, or both.
9) I have not created a Windows 8.1 account and am not using SkyDrive.
10) Only other software I have installed on the New laptop is Google Chrome, Office Home 2013 and iTunes - all are working.
Thanks in advance....

Well there is not much left. If telnet works then the path is clear and there is no hardware firewall blocking ports.
All that is left is software, so try windows safe mode with networking. A very handy way to eliminate software. it also actually disables most anti virus resident features and is preferred here because anti virus/security programs do not always disable or turn off when they say they have.
You might also try the McAfee removal tool. https://community.mcafee.com/thread/52788 I notice the rep said yes to both, they did not say not required.
Finally you could try creating a new profile, and see if it works just to exclude corruption of your existing profile. ( I doubt it but I am at the anything goes point)
Just as an aside, I have never had an email borne nasty and I for many years never even had an email virus scanner. So yes I think your a bit over cautious with mailwasher, if that is what your using it for. Thunderbird does not support scripting languages or flash, or most plugins in the email sandbox. The result is getting a virus from a mail in Thunderbird is really only possible, for all practical purposes, if you open that password protected zip from the young Russian woman and that is what the anti virus should be blocking anyway when the temp file is written.

Exchange Account not Retrieving Email Regularly

When I first start Mail, it logs in and synchs my Exchange (2007) account fine. But after that, it never retrieves the mail again. I have to restart mail to get it to synch again. What gives?

I wrote this article on tips for trying to rectify this issue of the Outlook 2010 client itself
http://www.bytemedev.com/outlook-2010-not-receiving-emails-while-activesynccitrix-clientowa-is/
#2 Usually does it for me.
1.) Verify network connectivity to Exchange from the machine (i.e. try pinging the box) or log into OWA.
2.) Fully Toggle Work Offline Mode.
*This means to Enable Work Offline from the Send/Receive Ribbon, shutting down Outlook (and Lync 201x as well), then launching Outlook, and then disabling Work Offline mode.
3.) Try turning it off and on again.
3.) Visit %UserProfile%\AppData\Local\Microsoft\Outlook and ensure OABs, RoamCache, ~xxxx.OST.TMP or ~xxxx.OST, are not in Read-Only mode, and avoid encrypting this folder (it isn’t Microsoft’s best practices.)
4.) Rebuild the OST by simply renaming the .OST to .OLD or some such, Outlook 2010 and Lync 201x have to be closed, then re-open Outlook 2010. This maybe needed for OST files several GBs in size. It’s very well documented and known to become unstable as size
increases.
5.) Rebuild the email profile itself by utilizing Control Panel\Mail (32-bit).
6.) Attempt a Repair of Office 2010 (Go to Programs and Features, and right click Microsoft Office 2010 click Changes).
7.) Attempt an Uninstall / Re-install of Office 2010 (you may need your product key for this!)
8.) IF you have tried all steps above, a lot of people are completely at a loss. Not me, rebuild the Windows Profile itself. It obviously has some corruption in the registry, temp cache, cache, effective credentials and what not.
9.) When all else fails, reformat! This is the equivalent to a nuclear strike though, so use the right tool for the right job.

Why does my iMac not shut down when I try to shut it down?

Wh does my iMac not shut down, or restart when I try to do either. It just sits there with the little loading circle continuously moving. The only way I can shut it down is if I hold down the power button to shut it down. Can anyone tell me why this is?
Thanks!

Open your Activity Monitor and check to see what is running?
If there is some important Process running, then it is better to wait until it has finished instead of cutting the power and corrupting who knows what?
If there is nothing important running, then follow the instructions in the link below for resetting the SMC.
Intel-based Macs: Resetting the System Management Controller (SMC)

HT4979 why can I not send email when away from my home wifi? Am able to receive messages OK, and outgoing mailserver is correct?

Why am I unable to send email when away from my home wifi ? I am able to receive mail OK, and have double- checked the outgoing server which is correct. This problem is consistent with my Macbook Pro, iPhone, and iPad2.
Attempts to send messages results in them sitting in the Outbox and never- ending 'sending message' displayed.
I am able to send using my me.com server.
Home service provider is Cogeco.
Any help would be appreciated.

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
iPad Mail
http://www.apple.com/support/ipad/mail/
Try a Reset - iPad How-Tos http://ipod.about.com/lr/ipad_how-tos/903396/1/
Or this - Delete the account in Mail and then set it up again.
 Cheers, Tom

How do I stop imac from retrieving email from my server?

I no longer want my mac to retrieve email from my server (sbcglobal). How do I stop it from doing that?

Open the Mail app>go to the word MAIL in the upper left corner of your desktop and click on it>Preferences>Accounts tab>Delete the "Incoming Mail Server" entry on the right.
Hope this helps

Not receiving email when sending large number of records using a FM?

Hi..
I am using the function module " SO_DOCUMENT_SEND_API1 " to send email....
When a single record is there.. or around 5-6 records are there... email is coming successfully...
But when there are more records..say around 100, the email is not coming... I checked SOST transaction and the status there is in red..and the error message is " Internal error: SO_OBJECT_MIME_GET Exception: 2 ".........
What could be the reason behind this problem....... ??
I have another problem... my output has over 60 fields, but in the email which i am receiving has only around 10 fields... how to solve this problem...??
Plz help...

Well... right now i am tryin to get only the first 2 fields.. but even in this case... i am not getting the email if around 15 records are there......
I am using the code which is given below which i found in SDN only......In this code.. data is getting selected from EKPO... i tried changing the number of rows getting selected.. and in this case, the attachement is coming as desired... but when i use the same code for my prog.. i am not getting the mail.. even if there are only 10 records or so...
*& Report ZT062108   ALV Header                                    *
REPORT zt062108.
TABLES: ekko.
PARAMETERS: p_email   TYPE somlreci1-receiver
                                  DEFAULT '<give email here>'.
TYPES: BEGIN OF t_ekpo,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
aedat TYPE ekpo-aedat,
matnr TYPE ekpo-matnr,
END OF t_ekpo.
DATA: it_ekpo TYPE STANDARD TABLE OF t_ekpo INITIAL SIZE 0,
      wa_ekpo TYPE t_ekpo.
TYPES: BEGIN OF t_charekpo,
ebeln(10) TYPE c,
ebelp(5) TYPE c,
aedat(8) TYPE c,
matnr(18) TYPE c,
END OF t_charekpo.
DATA: wa_charekpo TYPE t_charekpo.
DATA:   it_message TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
                WITH HEADER LINE.
DATA:   it_attach TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
                WITH HEADER LINE.
DATA:   t_packing_list LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
        t_contents LIKE solisti1 OCCURS 0 WITH HEADER LINE,
        t_receivers LIKE somlreci1 OCCURS 0 WITH HEADER LINE,
        t_attachment LIKE solisti1 OCCURS 0 WITH HEADER LINE,
        t_object_header LIKE solisti1 OCCURS 0 WITH HEADER LINE,
        w_cnt TYPE i,
        w_sent_all(1) TYPE c,
        w_doc_data LIKE sodocchgi1,
        gd_error    TYPE sy-subrc,
        gd_reciever TYPE sy-subrc.
*START_OF_SELECTION
START-OF-SELECTION.
*   Retrieve sample data from table ekpo
PERFORM data_retrieval.
*   Populate table with detaisl to be entered into .xls file
PERFORM build_xls_data_table.
*END-OF-SELECTION
END-OF-SELECTION.
* Populate message body text
perform populate_email_message_body.
* Send file by email as .xls speadsheet
PERFORM send_file_as_email_attachment
                               tables it_message
                                      it_attach
                                using p_email
                                      'Example .xls documnet attachment'
                                      'TXT'
                                      'filename'
                             changing gd_error
                                      gd_reciever.
*   Instructs mail send program for SAPCONNECT to send email(rsconn01)
PERFORM initiate_mail_execute_program.
*&      Form DATA_RETRIEVAL
*       Retrieve data form EKPO table and populate itab it_ekko
FORM data_retrieval.
SELECT ebeln ebelp aedat matnr
   UP TO 1000 ROWS
    FROM ekpo
    INTO TABLE it_ekpo.
ENDFORM.                    " DATA_RETRIEVAL
*&      Form BUILD_XLS_DATA_TABLE
*       Build data table for .xls document
FORM build_xls_data_table.
* CONSTANTS: con_cret TYPE x VALUE '0D'. "OK for non Unicode
*             con_tab TYPE x VALUE '09'.   "OK for non Unicode
*If you have Unicode check active in program attributes thnen you will
*need to declare constants as follows
*class cl_abap_char_utilities definition load.
constants:
    con_tab type c value cl_abap_char_utilities=>HORIZONTAL_TAB,
    con_cret type c value cl_abap_char_utilities=>CR_LF.
CONCATENATE 'EBELN' 'EBELP' 'AEDAT' 'MATNR'
         INTO it_attach SEPARATED BY con_tab.
CONCATENATE con_cret it_attach INTO it_attach.
APPEND it_attach.
LOOP AT it_ekpo INTO wa_charekpo.
    CONCATENATE wa_charekpo-ebeln wa_charekpo-ebelp
                wa_charekpo-aedat wa_charekpo-matnr
           INTO it_attach SEPARATED BY con_tab.
    CONCATENATE con_cret it_attach INTO it_attach.
    APPEND it_attach.
ENDLOOP.
ENDFORM.                    " BUILD_XLS_DATA_TABLE
*&      Form SEND_FILE_AS_EMAIL_ATTACHMENT
*       Send email
FORM send_file_as_email_attachment tables pit_message
                                          pit_attach
                                    using p_email
                                          p_mtitle
                                          p_format
                                          p_filename
                                          p_attdescription
                                          p_sender_address
                                          p_sender_addres_type
                                 changing p_error
                                          p_reciever.
DATA: ld_error    TYPE sy-subrc,
        ld_reciever TYPE sy-subrc,
        ld_mtitle LIKE sodocchgi1-obj_descr,
        ld_email LIKE somlreci1-receiver,
        ld_format TYPE so_obj_tp ,
        ld_attdescription TYPE so_obj_nam ,
        ld_attfilename TYPE so_obj_des ,
        ld_sender_address LIKE soextreci1-receiver,
        ld_sender_address_type LIKE soextreci1-adr_typ,
        ld_receiver LIKE sy-subrc.
ld_email   = p_email.
ld_mtitle = p_mtitle.
ld_format              = p_format.
ld_attdescription      = p_attdescription.
ld_attfilename         = p_filename.
ld_sender_address      = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
* Fill the document data.
w_doc_data-doc_size = 1.
* Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
* Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach INDEX w_cnt.
w_doc_data-doc_size =
     ( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name   = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
t_attachment[] = pit_attach[].
* Describe the body of the message
CLEAR t_packing_list.
REFRESH t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
APPEND t_packing_list.
* Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num   = 1.
t_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
t_packing_list-doc_type   = ld_format.
t_packing_list-obj_descr = ld_attdescription.
t_packing_list-obj_name   = ld_attfilename.
t_packing_list-doc_size   = t_packing_list-body_num * 255.
APPEND t_packing_list.
* Add the recipients email address
CLEAR t_receivers.
REFRESH t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
       EXPORTING
            document_data              = w_doc_data
            put_in_outbox              = 'X'
            sender_address             = ld_sender_address
            sender_address_type        = ld_sender_address_type
            commit_work                = 'X'
       IMPORTING
            sent_to_all                = w_sent_all
       TABLES
            packing_list               = t_packing_list
            contents_bin               = t_attachment
            contents_txt               = it_message
            receivers                  = t_receivers
       EXCEPTIONS
            too_many_receivers         = 1
            document_not_sent          = 2
            document_type_not_exist    = 3
            operation_no_authorization = 4
            parameter_error            = 5
            x_error                    = 6
            enqueue_error              = 7
            OTHERS                     = 8.
* Populate zerror return code
ld_error = sy-subrc.
* Populate zreceiver return code
LOOP AT t_receivers.
    ld_receiver = t_receivers-retrn_code.
ENDLOOP.
ENDFORM.
*&      Form INITIATE_MAIL_EXECUTE_PROGRAM
*       Instructs mail send program for SAPCONNECT to send email.
FORM initiate_mail_execute_program.
WAIT UP TO 2 SECONDS.
SUBMIT rsconn01 WITH mode = 'INT'
                WITH output = 'X'
                AND RETURN.
ENDFORM.                    " INITIATE_MAIL_EXECUTE_PROGRAM
*&      Form POPULATE_EMAIL_MESSAGE_BODY
*        Populate message body text
form populate_email_message_body.
REFRESH it_message.
it_message = 'Please find attached a list test ekpo records'.
APPEND it_message.
endform.                    " POPULATE_EMAIL_MESSAGE_BODY

Mail does not retrieve emails

My Mail has two acct (mac.com and an exchange acct). This morning, Mail suddenly stops retrieving new emails from the exchange acct. (mac.com acct works fine). I know it tries, since the dailing spin spins. But seems it has hard time connecting to the server and fetching new emails. Activity viewer shows "logging in as user ..." and "sync.. with server" working.
Checked with our sys adm, the server is fine. I can access my acct via web client.
Help please! I have been using Mail for a few years and don't want to give up.
HW

You’re welcome.
> I'm afraid that the size of the mailbox is pretty big. I checked
~/Library/Mail/exchange-acct, which is about 6GB.
OK. That may be the problem then. The overall size of the account folder is not an issue, but individual mailboxes should be under 2 GB in Mail 2.x (the limit was even lower in Mail 1.x).
You may use the Account Info window to check how much size each mailbox takes up on the server — choose Get Info (⌘I) from the Action menu (gear icon) located below the mailbox list in the main Mail window.
Check that none of your mailboxes is larger than 2 GB. Create custom mailboxes on the server and re-organize your mail there however you wish via webmail if necessary.
When done, you may want to re-create Mail’s index and cached mailbox contents as follows (and this may certainly take a while given the size of the account):
1. Quit Mail if it’s running.
2. In the Finder, go to ~/Library/Mail/. Make a backup copy of this folder, just in case something goes wrong, e.g. by dragging it to the Desktop while holding the Option (Alt) key down. This is where all your mail is locally stored.
3. Locate Envelope Index and move it to the Trash. If you see any other “Envelope Index”-named file there, delete it as well.
4. Move any “IMAP-”, “Mac-”, or “Exchange-” account folders to the Trash. Note that you can do this with IMAP-type accounts because they store mail on the server and Mail can easily re-create them. DON’T trash any “POP-” account folders, as that would cause all mail stored there to be lost.
5. Open Mail. It will tell you that your mail needs to be “imported”. Click Continue and Mail will proceed to re-create Envelope Index — Mail says it’s “importing”, but it just re-creates the index if the mailboxes are already in Mail 2.x format.
6. As a side effect of having removed the IMAP account folders, those accounts may be in an “offline” state now. Do Mailbox > Go Online to bring them back online.
Note: For those not familiarized with the ~/ notation, it refers to the user’s home folder. That is, ~/Library is the Library folder within the user’s home folder, i.e. /Users/username/Library.

Email Activity Not sending email when BPEL process fails

In 11g SOASuite I have a BPEL process which does the following,
1) Receive response from client
2) Email activity - Notify with an id received in the request as content
3) Insert data into a table using db adapter
Whenever db adapter has some key violations or issues, I notice that no emails are getting dispatched. When I look at EM console it displays that txn has been rolled back after 3rd step. I understand that but it makes me ask this question,
How can I make the process to send an email at step2 irrespective of an error that happens down stream at step-3? How to make email activity not part of this Txn scope?
It works as expected(emails are dispatched) when there are no issues at step-3.

Hi,
In order to not rollback your transactions, you need to hit a dehydration point, meaning, save your process into the db store and perform a commit until that point.
It sounds like a simple process, so you can drag a checkpoint activity after the email activity.
That is one option. Try, and see if it works for you.
Arik

I am not Getting emails when i schedule the Report.

Hi All,
When i Schedule the Report in obiee 11g i am Getting Alerts Successfully but am not getting Mail.
When i Schedule the Publisher i am getting mails.
ERROR Details:
Eventually succeeded, but encountered and resolved errors...
Number of skipped recipients: 2 of 3
AgentID: /users/administrator/Agents/latest test
[nQSError: 75005] Failed to send AUTH command. SMTP server does not support any authentication mechanisms. Remove email credentials, or use a server which supports authentication. AgentID: /users/administrator/Agents/latest test
...Trying SMTP Delivery loop again... Sleeping for 3 seconds. AgentID: /users/administrator/Agents/latest test
[nQSError: 75005] Failed to send AUTH command. SMTP server does not support any authentication mechanisms. Remove email credentials, or use a server which supports authentication. AgentID: /users/administrator/Agents/latest test
...Trying SMTP Delivery loop again... Sleeping for 5 seconds. AgentID: /users/administrator/Agents/latest test
[nQSError: 75005] Failed to send AUTH command. SMTP server does not support any authentication mechanisms. Remove email credentials, or use a server which supports authentication. AgentID: /users/administrator/Agents/latest test
...Trying SMTP Delivery loop again... Sleeping for 8 seconds. AgentID: /users/administrator/Agents/latest test
[nQSError: 75005] Failed to send AUTH command. SMTP server does not support any authentication mechanisms. Remove email credentials, or use a server which supports authentication. AgentID: /users/administrator/Agents/latest test
Exceeded number of SMTP delivery retries.
Thanks and Regards
Kiran Kumar

Hi All,
I got the answer and it worked for me:-
1. If the BI Scheduler cannot ping the mail server specified in the scheduler configuration, check the correct server is specified. If it is, check that it is up and running.
2. If the user name and password are specified in the scheduler configuration, log in to Enterprise Manager and navigate to:
Weblogic Domain
Right click on bifoundation_domain > Security > Credentials
Expand oracle.bi.enterprise
Highlight mail.server and delete the user name and password..
Thanks & regards
Nitin Aggarwal

IMac not retrieving email when asleep

Similar Messages

Maybe you are looking for