Imac not working properly in wifi connection

Even after 10.7.3 upgrade the wifi connection is still not working properlly.Every the IMAC switch to idle the wifi disconnect and never reconnect automaticly

same problem here !

Similar Messages

  • My phone is not working without a Wifi connection.

    I had to get a new cell phone because my speaker phone no longer works. Luckily my phone was still under warranty. Now my phone does not connect wirelessly unless I have a wifi connection. I never had to have a wifi connection in the past to receive and send email, connect to the internet, etc.. How do I fix this problem?

    AnufromVA wrote:
    Now my phone does not connect wirelessly unless I have a wifi connection.
    That surprises you?
    I never had to have a wifi connection in the past to receive and send email, connect to the internet, etc.
    Are you trying to say you cannot connect via your carrier's cell network?  You did remember to put the SIM in?

  • Touch and PC not working on same WiFi connection

    I'm having trouble getting my touch to work on my home WiFi ONLY when my PC laptop is connected. It says it's connected but when I open Safari it says "Safari can't open the page because it can't find the server". If I disconnect my laptop, and restart my modem then my touch connects perfectly and I can browse the web. However, at this stage, if I connect my PC to the WiFi, it connects but I am unable to browse the web.
    Any ideas anyone?? It's really annoying to have to switch the router off everytime I want to swap devices!

    Did it do a system update for the Touch aswell? It did for me when I selected to Restore. Did you enter the password for your network? If none of this is working, I suggest you go to your nearest Apple Store and let them look at it. They can confirm if its faulty or not

  • Touchpad not working properly after changing LCD and invertor

    Product - HP Pavilion DV4 1318TU
    I was having display problems, went through repairer. He changed the LCD, invertor and fixed some issues of motherboard(related display output). After fixing these issues i am facing touchpad issues. Touch is not working properly, and when I use USB mouse its working but after 1-2hr mouse is also not working properly. I connected to external monitor then touchpad is working fine without any issues. Kindly help me and tell me the root cause.
    Thanks

    Hey @ashfaque91 ,
    Welcome to the HP Forums!
    I understand the touchpad and mouse are not working on your notebook after having your display serviced.
    It seems quite odd that they would work fine on an external monitor, and to be totally blunt this is something I cant even attempt to explain. 
    Was this service provided by an HP service provider or was it done by an independent provider? 
    Try using the notebook in safe mode to see if there is an issue with the display driver causing some kind of wonky issue. Without knowing which version of Windows you are running I cannot tell you exactly how to boot safe mode on your notebook, but you can find this information easily by searching "Safe Mode Windows #" in Google.
    Other than this I would suggest getting back in touch with the service provider if the issue started immediately after they provided service to the notebook.
    Alternately, you can call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the following link to get the support number for your region: Phone Assist Worldwide.
    Thanks!
    Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    The Great Deku Tree
    I work on behalf of HP.

  • Wifi is not working properly once i updated to the new operating system.

    My I pphone 4s wifi is not working properly once the softwere is updated to the new IOS.
    It shows the wifi but when selected its says "unable to connect". I tried connecting to many wifi networks but gives the same error message.
    Kindly advice how to rectify this

    I am trying that and itunes says that you have to have icloud backup off. My icloud "button" is a whiteish green and does not respond to touch. I can't turn it off.

  • Bootcamp 3.2: Microsoft Virtual WiFi MiniPort Adapter shows "device is not working properly...Code 31"

    Using Windows 7 Enterprise 64-bit, Microsoft Virtual WiFi Miniport Adapter shows the "device is not working properly because Windows cannot load the drivers required for this device. (Code 31).".The device is the Apple iMac10,1 All-in-one computer. Right clicking browse files (for the device) shows the Bootcamp (C:), DVD (D:); and my external hard drives can be selected.
    Internet and WiFi connections all working ok. Am also running MacDrive 8 to access the Mac drives when in the Windows partition, again without any seeming issues.
    Updating the driver simply generates another Code 31 error.
    Appreciate this seems to be a known problem - is the a solution a novice use might be able to follow or should I simply ignore the error message?
    Driver Date us 21/06/2006 and Driver Version is 6.1.7600.16385.

    Hi  ,
    Thank you for visiting the HP Support Forums and Welcome. It is a great site for information and questions. I have looked into your issue about your HP ENVY 4-1204tx Ultrabook and issues with WiFi adapter is not working properly. Error codes in Device Manager in Windows  8.1 could be fixed by deleting any extra drivers. So I would uninstall all that is listed in the Network drivers in the Device Manager, restart the Notebook. Here is a list of Device Manager options, this might help.
    Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system that need updating or reinstalling. Hope this helps. Thanks.

  • HT204023 hi there can any one help me i have a iphone 5 but my mobile internet not working but i can connect to my wifi no bother

    hi there can any one help me i have a iphone 5 but my mobile data is not working but a can connect to my wifi no bother

    talk to your carrier about the data subscription and possible settings changes to their apn than

  • Satellite Pro U200: VGA output not working properly when AC adapter was connected

    Hi,
    I have a problem with vga output. When I'm working on battery and connect my notebook to external monitor it's ok, but when I connect AC adaptor then start waving also bluetooth and wlan does not work properly. In other case when I remove battery from notebook and connect AC adaptor it works properly.
    thanks in advance

    As long as you use a CRT you should set the refresh rate new, at least 85Hz. Standard is 60Hz as far as I know, and that hurts in your eyes.
    The wireless lan behaviour is quite normal as long as your not right next to the access point. On battery power the wireless lan card reduces its energy consumption thus the connection will be poor if you dont have a perfect signal. You can turn this off in the iNTEL Pro/SET wireless software, where you can configure the adaptor. Try to change the powersafe mode to manual and full power, this should solve your problem.

  • Since the last update to iTunes 11.0.3 (42) the airplay connection is not working properly , keeping breaking up

    since the last update to iTunes 11.0.3 (42) the airplay connection is not working properly , keeping breaking up, while the airplay works fine with my iPad and iPhone. Anyone has experienced the same? any fix available?

    Hi Erdelestre,
    Thanks for visiting Apple Support Communities!
    See this article for some tips about troubleshooting AirPlay:
    Troubleshooting AirPlay and AirPlay Mirroring
    http://support.apple.com/kb/ts4215
    Troubleshooting performance issues with AirPlay or AirPlay Mirroring
    If you are experiencing intermittent playback or significant network lag with AirPlay or AirPlay Mirroring, it could be due to a weak Wi-Fi connection, interference, or the distance between the Wi-Fi router and your iOS device, Apple TV or AirPort Express. Try the following suggestions:
    Ensure that other devices are not trying to stream to the same Apple TV at the same time.
    Turn off Bluetooth on your iOS device by tapping Settings > General > Bluetooth.
    Ensure that your Wi-Fi router is set up with the recommended settings for the best performance.
    Certain external devices, such as microwave ovens and baby monitors, may interfere with a Wi-Fi network. Try moving or disabling these devices.
    If possible, try to locate your Wi-Fi router in the same room as your Apple TV and iPhone/iPad.
    If your wireless and wired networks are the same, try connecting your Apple TV to the router via Ethernet instead of Wi-Fi.
    If the Wi-Fi router has an external antenna, check to see that is it connected properly and in good condition.
    Use the Wi-Fi network troubleshooting guide to resolve interference and other issues.
    Best,
    Jeremy

  • My iphone 3gs is not working properly, when switched on it says 'Update Completed' as though it has just been updated. On the next screen it says to 'Connect to iTunes'. It doesn't, however, connect to iTunes and more often than not just resets itself.

    My iPhone 3gs is not working properly and hasn't been since about September of last year. When switched on (Quite often it won't even turn on) it says 'Update Completed' as though it has just been updated. On the next screen it says to 'Connect to iTunes'. It doesn't, however, connect to iTunes and just resets itself over and over until power is gone. Occasionally after switching on and off a few times it functions normally for a few hours and some times even a couple of days but eventually always turns itself off and goes back to the 'Update Completed' screen. Does anyone know what might be causing this and/or a way of fixing it?

    Morning JordenR,
    Thanks for using Apple Support Communities.
    You can resolve many restore issues using the troubleshooting steps documented here.
    For more information on this, take a look at this article:
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/ts1275
    Best of luck,
    Mario

  • Connecting my iphone to wall charger makes my iphone touch not work properly

    I have a iphone 3g and a orignal apple wall charger when i connect my iphone to charger it makes my iphone touch not work properly, but it charges the phone properly.the data cable is also working properly. So can any one help me out here.thanks

    Holy smokes, I thought I was losing my mind, but that's the exact same thing that's started happening to me since this whole 4.3.1 "upgrade" disaster started - hooking it up to the wall charger overnight, wake up in the morning and it's a brick requiring multiple attempts to restart.
    It's also randomly and spontaneously crashing - it'll be on the table or couch beside me, I'll catch movement out of the corner of my eye and look over and see a silver apple.

  • I have a Linksys WRV200 wireless router and the wireless signal is not working properly so I cannot connect to the internet wirelessly. the wireless light has a fast green blinking light. how can I fix the router?

    I have a Linksys WRV200 wireless router and the wireless signal is not working properly so I am unable to connect to the internet wirelessly.  The wireless light is blinking green very quickly and I connect and disconnect from the network constantly.  How do I get the router to work properly

    Hello James,
    The flashing WLAN light means activity (data getting transferred). Try disconnecting all your devices and check whether the light is still flashing or disconnect the router from internet and do the check.
    Do you have your SSID as linksys or the default one? If your neighbor has the same SSID, then traffic could result from your neighbor's one. Try changing your SSID and password. Make your security WPA/WPA2.
    Hope this helps,
    Thanks
    Vijay

  • I HAVE IMAC 27 INCH MY MOUSE RIGHT CLICK IS NOT WORKING PROPERLY .ANY ONE HAVE HIS PROBLEM

    I HAVE IMAC 27 INCH MY MOUSE RIGHT CLICK IS NOT WORKING PROPERLY .ANY ONE HAVE THIS PROBLEM

    Have you tried going to System Preferences>Mouse and making sure that right click is set to secondary click?

  • The Connect from Intel Pro/1000 T to 1000base-t Port on Catalyst 4000 (WS-X4412-2GB-T= module) Not Working Properly

    The connect from Intel Pro/1000 T to 1000base-t port on Catalyst 4000 (WS-X4412-2GB-T= module) is not working properly. The Intel Pro/1000 T NIC connects to a 10/100 OK. Auto-negotiation is set at both ends. We can successfully ping across the link. However performance is so poor as to make the connection unusable.

    When an Intel Pro/1000 T NIC is connected to a Catalyst switch, the customer may see poor network connections or excessive numbers of dropped packets. The problem arises when a module with a TBI interface transmits an odd byte packet to a receiver with a Gigabit Media Independent Interface (GMII).
    The interoperability issue is a result of the implementation of Carrier Extension. Carrier Extension is detailed in sub section 35.2.3.5 in the IEEE 802.3 specification. Carrier Extension can be used to pad the last byte of a packet, so the packet is aligned on an even numbered boundary.

  • Since uploading iOS7.03 my iPhone 4S cannot get WiFi and Bluetooth is not working properly.

    Why will my iPhone 4S not work properly since the iOS7.03 upgrade? No WiFi (greyed out, button will not move) and Bluetooth not working.

    it's a well known issue.... wifi and bt died in many 4s.... one is mine..

Maybe you are looking for

  • Upgrade - It works, then it doesn't

    I have been trying to get the new iTunes 7 to work (iTunes will not open at all) - I have followed tips given in this forum. The tip that worked was uninstalling and reinstalling Quicktime. After reinstallation, iTunes works fine. However, once I shu

  • Oracle 10g Linux - Bad files on otn

    Am I the only one that is having problems here... I have tried downloading 10g over the past couple of days, multiple times. Each time, the files come in without issue but trying to unpack them with cpio (after un-gzipping them) gives me errors - eve

  • Help please! "Could not save as *** because the file...."

    I'm getting this error message when I try to save my files and it is happening often enough that it bothers me. This is very sudden - within the last week or two. I have Photoshop CS5, using Windows 7. I get the error message "Could not save as *** b

  • Reports failing to Email - losing logon parameters

    Post Author: hd1 CA Forum: General I have some reports that are failing to email.  There are 2 reports that fail everytime they are supposed to run.  The first report I have that is failing is not getting emailed when it should.  It says that there w

  • Flash gets bad reputation from lazy programmers

    Hi all I would just like to say Flash gets a bad reputation from lazy programmers. I talk about flash with friends and they say 'Flash is to costly to bandwidth' or 'Flash files are to big for the net' or 'I hate preloaders they take too long'. I've