IMac OS X (Mavericks) time/clock keeps going out of sync

Hi,
I have a late 2012 27" iMac Intel desktop and for the last few weeks the clock/time does not stay in Sync. It seems to 'gain' around 1 minute per day. It is set to update automatically from the 'set date and time automatically' and if I check then uncheck the box in settings it corrects.
This seems a simple solution but it is not a 'fix'. The bigger issue is I run a Parallels Windows to run my desktop trading software (I am a full-time market trader), which takes the time from the OS X enviroment. This has caused HUGE problems as I took several trades on the DOW eMini, believing the New York market had opened (we trade to the second) only to later discover I was several minutes early on each trade which ended up costing me several thousands of £'s.
Suddenly the problem isn't a small issue any more and I need to know how to remedy it. I now return to the settings window every few hours to reset it but its not a solution.
I have seen posts relating to the problem which describe how one needs to recompile elements of the operating system but I fail to see how this should be necessary when I have paid for a premium product. Surely keeping time is something Apple feels is important?
Any help would be well received, thank you.

HedgePiglet wrote:
I havent a clue how to modify/amend the ntp.conf file! I shall take a look at it now and assuming its not too onerus give the removal of the trailing period a shot.
I must admit I'm a little perplexed at how something as simple as timekeeping seems to be such an issue. I'd have thought that's a bit of an abacus moment for Apple...
It is not normally an issue at all, unlike Frank though I have seen it before, only once, and in a current thread.
Here is the other thread: Re: Clock not right, and more
And just like this one I do not have a definitive answer for you I am afraid.

Similar Messages

  • My adobe pro cc 2014 time line 82 minutes keep going out of sync ?

    My adobe pro cc 2014 time line 82 minutes keep going out of sync?

    More information needed for someone to help... please click below and provide the requested information
    -Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
    Exactly what is INSIDE the video you are editing?
    Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
    Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
    https://forums.adobe.com/thread/1070933 for screen shot instructions
    Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download
    Does your video use a VARIABLE Frame Rate or a Constant Frame Rate?

  • After upgrade to mavericks: time machine keeps asking for my back up disk and won't open unless i plug in the disk. any solutions?

    after upgrade to mavericks: time machine keeps asking for my back up disk and won't open unless i plug in the disk. any solutions?
    before the upgrade, i could open time machine without the need for having the back up disk plugged in.

    Ok. I got it to work, sort of....
    As I mentioned before I tried the "disk password" and the "Time capsule Password" options to see if I can start the back up again or start a new backup. Neither worked. So I tried the firmware down grade, but like you said that did not work. I then decided to try the "Account password" option and I have never used this option before becasue it states that if there is data on the drive it would not be acessable after creating an account. Since I wiped out the disk that was nno problem. When I created the new account and choose the drive it asked for the user name and password. I entered the info for the new account I just created(FYI this has nothing to do with your login username and password), bingo! It worked!
    Now I have two partitions on the TC disk. The old one and now the new account. I am guessing this is to be used if I have multiple computers, which I don't.
    I any case, I am going to wipe out everything again and try again to do a backup the way I had it before.

  • I'll be watching a movie in iTunes, and the movie will freeze, but the movie timer will keep going. Any idea how to fix?

    I'll be watching a movie in iTunes for Mac, and the movie itself will freeze, but the movie timer will keep going but the movie won't continue playing. I've tried restarting my Mac and restarting iTunes, with no luck.

    Hi Sniper Trago,
    Welcome to Apple Support Communities.
    It sounds like there is a payback issue with one or more movies in iTunes on your Mac. If the movies weren't purchased from the iTunes Store, do you see the same issue with content downloaded from the iTunes Store? The article below provides some suggestions that will rule out conflicts caused by plug-ins that you might be using with iTunes.
    iTunes: Troubleshooting issues with third-party iTunes plug-ins
    http://support.apple.com/kb/TS3430
    I hope this helps.
    -Jason

  • The connection between my iMac (8.1) and Airport express keeps dropping out all the time., The connection between my iMac (8.1) and Airport express keeps dropping out all the time.

    The connection between my iMac (8.1) and Airport express keeps dropping out all the time., The connection between my iMac (8.1) and Airport express keeps dropping out all the time.

    Hi BillCilla,
    If you are having intermittent but persistent drops in AirTunes via your AirPort Express, you may find the following article helpful:
    Apple Support: AirTunes audio stream drops or cuts out
    http://support.apple.com/kb/ta21538
    Regards,
    - Brenden

  • Why does the sound keep going out?

    The sound keeps going out for everything:  iTunes, any website  which has audio, even the volume buttons on my keyboard.  I notice that when I restart my computer it will work temporarily, maybe 10-15 minutes and then will go out again.  This just started happening and I'm not sure what is going on. Please help!

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          

  • HT201364 i have installed mavericks and it keeps logging out frequently on its own. Please help

    Hi
    I have installed mavericks and it keeps logging out frequently on its own. Does anyone else have this problem? What do I do? Please help.

    Check Security & Privacy system Prefs, general tab. Click the padlock, then authenticate. Click advanced tab.
    Check to make sure it isn't set to log out after a certain amount of time.

  • Eny M4 with Beatsaudio, sound keeps going out.

    Sound keeps going out, have to either reboot or stop and start services.
    just bought it,   Win7 Professional, all updates,  uninstalled IDT High Def audio software, sound works, but at a low level, not getting the boost it should have with the IDT software.  
    Suggestion?
    W5D

    Hello W5D,
    Let's try something simple first.
    Right click the speaker icon in the Taskbar and select 'Playback Devices'. 
    Left click the default device once to highlight it ( it's usually 'speakers & headphones' ) then click the Properties button. 
    Click the Enhancements tab and put a tick in the box next to 'Loudness Equalization'. 
    Click Apply to save the change and then click OK in all remaining windows
    Please let me know if this helps.  If not, please reply with your product number and operating system.
    Good luck!
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Im on iOS 8.0.2 and it just keeps going out of cellular service, what can i do?

    Im on iOS 8.0.2 and it just keeps going out of cellular service, what can i do?

    Hello there cubandope,
    If I understand correctly, your iPhone cellular data is dropping periodically, but you can still make calls. I would use the troubleshooting in the following article to help resolve the issue here:
    If you see No Service in the status bar of your iPhone or iPad
    Follow these steps, testing after each.
    Tap Settings > Enable Airplane Mode, wait five seconds, then turn off airplane mode.
    Restart your device.
    Remove the SIM card. If the SIM card is damaged, worn, or bent, or if it's too big or small for the SIM tray, contact your carrier for a new one. Then reinsert the SIM card.
    Check for a carrier-settings update: Connect to a Wi-Fi network, tap Settings > General > About, and install any available carrier-settings updates. If you can't connect to Wi-Fi, connect your device to a computer that has iTunes.
    Update your iPhone to the latest version of iOS.
    Reset network settings by tapping Settings > General > Reset > Reset Network Settings. This will reset all network settings, including Bluetooth pairing records, Wi-Fi passwords, VPN, and APN settings.
    Contact your carrier to check for any network or account issues.
    Restore your iPhone.
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • Why does the sound keep going out on my ipad? It seems to just go out in between sleep/wake sessions.

    Why does the sound keep going out on my ipad? It seems to just go out in between sleep/wake sessions.

    Hello stephiejoy,
    Thanks for using Apple Support Communities.
    The following support article will help you in resolving this issue your iPad is having with its audio.  Even though this article states it's for an iPhone, the same troubleshooting steps do apply to your iPad as well.
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/ts5180
    Take care,
    Alex H.

  • My track pad keeps going out

    For some reason my track pad keeps going  out. The mouse move but when I click to open or close something it does nothing. I have to then turn the computer off and let it set for awhile then when I come back it is working. Has anyone had this issue. How can I fix this or do I need to take it into a Apple Store.

    It is better to take the computer to the Apple store to have it checked out.
    Best.

  • Laptop Audio keeps going out

    PC info:
    Manufacture: Hewlett-Packard
    Model: HP Pavilion dv6 Notebook PC
    Processor: Intel(R) Core(TM) is-2410M CPU @ 2.30GHz
    Installed Memory: 6.00 GB of RAM
    System Type: 64-bit Operating System
    Operating System: Windows 7 Home Premium
    Product #:  LW217UA#ABA
    The problem is the sound keeps going out. An example: I'm watching a video and after a while the speakers start making a soft poping noise. The only solution that I have found to fix this is shutting the laptop for about an hour or so and when I open the laptop's speakers work for about an hour or two. It also happens with headphones. Even if I don't have a video or music playing I can still hear the poping noise. Please help me.

    Hi @Iconicspartan ,
    Thank you for visiting the HP Support Forums and Welcome.Thank you for the detailed information very very helpful. I have looked into your issue about your HP Pavilion dv6-6150us Notebook and the popping sound or crackling noises.
    Here is a document on troubleshooting sound.
    Please make sure your updates have been done on the Notebook. In the device manager under sound right click and update the driver.
    Hope this helps you.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • My speakers keep going out

    not sure if this is where it goes, but the speakers on my iBook G4 (14 inch) keep going out, or getting fuzzy, then going back to normal. It hasn't been a big problem until recently.
    Is there anything to do to fix that or is it normal?

    It's definately not normal! I would recommend taking the iBook into an Apple Store.
    -Landon

  • Issues with finder going out of sync with file images in cover flow.

    Hi All,
    I'm having issues with files going out of sync with images in cover flow since updating to Mavericks. Typically, if I had for example 10 pictures listed as 1 to 10, if i deleted images 6&7 the images remain in coverflow but the file listings are removed, then if i click on image 7 the file listing of image 8 is highlighted, then to make matters worse, if i click on the file listing for image 9 in shows image 8 in cover flow. To stop this I have to shut down finder and restart it, then the whole thing repeats itself if i delete more images. Its a nightmare when your working with 50 plus images at a time!!! Help!!
    Thanks all.

    com.apple.systemuiserver.plist and com.apple.finder.plist
    Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J.  When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder.  Select Preferences/. Move the .plists to your desktop.
    Re-launch Finder by loggin out/in and test. If it works okay, delete the plist from the desktop.
    If the same, return the .plist to where you got it  from, overwriting the newer ones.
    Thanks to leonie for some information contained in this.
    You might need to redo the View settings after an update.
    If you look at the 'More Like This' box (top right) it seems the Cover Flow view is having problems.
    Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
    Feedback

  • Linked video audio clip goes out of sync when put in timeline - why?

    Learning to use Final Cut Express. Clip plays in browser with audio in time with video but as soon as clip is dragged onto timeline the audio goes out of sync. Why? Please can anyone help because its driving me mad!

    You don't give any details as to FCE's settings, camera format or your workflow so I can only hazard a guess.
    One of the main reasons that audio goes out of sync is because the Easy Setup audio settings do not match the camera's audio settings.
    The default setting is for 16bit (48KHz) but your camera may be shooting 12bit (32KHz audio).
    If this is the case you need to recapture using the 32KHz Easy Setup.

Maybe you are looking for

  • Urgent! Title in the center for ALV GRID

    Hi, I'm using FM REUSE_ALV_GRID_DISPLAY. I need to make a header like this: Reporting idocs (center of alv)        data time Material & batch (center of alv) Can anyone tell me how? Thanks!

  • Problem in running JAR file

    Creating a mobile game using J2ME. The JAR file created by Netbeans IDE when bein run on mobile gives an error: JAR and JAD file did not match. Manifest file: Manifest-Version: 1.0 Ant-Version: Apache Ant 1.6.2 Created-By: 1.5.0_06-b05 (Sun Microsyst

  • Using sequence in adf

    hi i have a sequence in my database how can i use that sequence in my application. i have a createInsert button, i what to insert the id using the sequnce in my database Edited by: ADFnewbie on 2012/01/11 11:04 PM

  • QM workcenter with material specification

    Hi there ,               I am using the material spec for a material to inspect. Can anyone please suggest me that where can I maintain the QM workcenter for it as we are not using the inspection plan Regards Kaushik

  • Cannot Save Preference??? (EAR4)

    I cannot save preference for every and all settings in the Tools --> Preferences. When I changed some values, click OK and open the preference again, all the old values re-appear.... Is that preference cannot save at this moment???