IMac - OS X - Will Not Start / Safe Boot / Boot to CD

Unit:
2007 iMac with OS X ... unknown version
Problem:
Will not boot. Upon pressing power button it attempts to go through startup procedure then grey-screen and error message (You Need to restart your computer. Hold down the power button until it turns off, then press the power button again.)
I have come to understand this is called a "Kernel Panic"
I have been researching this issue all day. I cannot get it to safe boot by pressing the shift key. It does pull a progress bar but ultimately fails and returns to the kernel panic.
I have attempted to start from the CD to attempt utility disk, but I cannot get it to boot from CD. I have held the C key down. I have pressed it repeatedly. I have used it in combination with the alt/control/command keys. All have failed.
If anyone has any idea what might can be done I thank you in advance for your assistance.
~Daniel

You have a hardware issue. Please make an appointment at your local Apple Store or AASP so it can be professionaly diagnosed.

Similar Messages

My IMac 24" intel will not start in safe mode.

Did a Shift - Command-V and the black screen showing all the startup steps appeared and it all looked good except: AFL Alart Sockwed cant update and INIT Reboot transmit failed. All else looks good. I have tried this 3 times and never go past that point. Then the screen turns off white like it does when it starts normally before the apple appears and the last time the screen went black.
I have tried starting with just the Shift Key and computer starts up but not in safe mode.
I have tired starting with the OS X disk and the C key and it will not recognize the disk.I used the #1 disk since the instructions are printed on the disk. Did not work so I tried disk 2 and I get a menu to start the OS or tools. If I click on either one the screen goes white and stays that way.
computer starts fine and provides a login window, and then the desktop screen with screen saver pictures in perfect color. As it goes through starting programs it starts the same programs that is had open when the computer originally crashed. Even when I close them, before it locks up again, and I am forced to restart the same programs open up to the same place. Its like the computer is frozen in one location and will not go beyond that point. Eventually the screen turns white and sometimes black and sometimes gray.
Tech support thought it was the video card, put a new one in but did not fix the problem and then said it was not that but that it was the monitor. I said that did not make sense since the monitor and desktop icons and pictures are beautiful and clear. They then said it was the inverter board on the monitor and Apple only replace the whole thing. I purchased an inverter board and replace it. No change. The tech person said that the computer works find without the monitor connected - I will see if that is correct next. Isn't that a more systimatic testing procedure then trying parts to see if it works? Oh I did do the complete long hardware test. Took about an hour and it passed! Isn't this strange?
I have to replace a monitor that has perfect color and image if it is something simple to fix or replace. Has anyone ever encounter anything like this? Could it be a virus?

As you probably read everthing was working fine for over an hour so I shut down and put everything back together completely, all monitor screws, aluminum cover and screws and screen cover, unplugged the external monoitor, plugged in external HD's and turned on the computer and guess what the old problem returned. So I unplugged the external HD's and plugged in the external monitor and took the screen cover off and restarted the computer and guess what it is working fine. Doing a disk utility verify first then if no problem I will unplug the external monitor if all is good then I will plug in the external HD's if all is good I will install what I believe is the problem the monitor cover screen.
Your post about the Temp sensor and another post about the cable to the monitor with the temp sensor has me believing that the monitor is getting too hot for the fans to cool down or the sensor is faulty. Which one is the temp sensor? It is the monitor cable that has the little box at the end that screws to the logic board?
How do you know if the secsor is bad or the monitor is overheating and the sencor is working correctly? Is there a test?

Imac G5 tiger will not start up, PLEASE HELP

i have an imac G5 powerPC running tiger. when i turn it on it does the normal noise, then goes through the normal stuff, but when the load up or start up bar comes on, it will load slowly inch by inch when normally it would load almost instantly. it will then get to the end and just stay there...
what is wrong with this? how can i fix it? please help, thanks!

HI,
*"thank you for your reply. however this did not work."*
Do you mean you couldn't run Disk Utility from your install disk?
*"if i re-install tiger will my documents and music and stuff be lost? will that solve my problem?"*
No one can guarantee it will solve the problem but instead of an erase and install which would erase all your documents and music, try an archive and install instead. For information go here.
About the Archive & Install Feature
You should also make a back up of important files before any Mac OS X installation, whether erase or archive just in case.
*"i tried to install the latest security update and when it was downloading it, it was almost done when a message came up and said that it could not be installed at this time"*
Check your available disk space also. Right or control click the MacintoshHD icon on your Desktop, then click: Get Info. In the Get Info window, click the discovery triangle so it's facing down. You will see; Capacity and Available Make sure you have 10% available disk space, 15% is better. Not enough available drive space can cause issues like you are experiencing.
Carolyn

IMac G5 (EMC1989) will not start

I have read several messages, but just cant seem to find my issue. I try to start and the computer (G5 Imac (EMC 1989) gets stuck at the gray screen and progress indicator. I have tried... zapping the pram, reset the PMU, repaired the permissions. I have not done an archive and reinstall as I need to back up the data and reformat the HD as per a message I got when I tried to reinstall.
The fan is humming loud and the gray screen just sits there for ever... 15-30 minutes then I give up.
Not sure if the effort is worth this 4 yr old machine, or just time to upgrade.
Thanks for your replies, Nic

Take a look at this Apple support bulletin - http://www.apple.com/au/support/imac/powersupply/repairextension/. While the bulletin focuses on EMC2056, I suspect that Apple may have extended this to other machines as well. I have a 20" iMac with EMC1989 and it died a few months ago. I lugged it into an Apple Store today in Chicago and the guy took the back off, identified a diagnostic light that was blinking, heard the power supply clicking and said that it was a known issue and that he would replace the power supply for free.
It took about 20 minutes and the machine is up and running and is good to go.
So... food for thought. The clicking that you hear may not be the hard drive and could instead be the power supply.
Good luck!

IMac will not start up - blue screen after months of Leopard use

I have an iMac G5 that will not start up. It hangs at the blue screen, but does not have the issue with the ApplicationEnhancer.bundle file. It will start up in safe mode.
This iMac will not start from a bootable external drive (the external drive can be used as a start up disk successfully with my iBook G4). The iMac's internal drive can be used as a start up disk for the iBook (via the target mode) and does not appear to have any problems. Does this seem like it is a hardware issue with the iMac? The iMac also hangs at the blue screen if I attempt to start up with the Leopard install disk after using the startup disk preference pane in safe start mode.
I have repaired permissions, verified the disk, etc., using the disk utility. I have cleared caches, preferences, and so on, using Mac HelpMate.

It may be that some of your login items might be incompatible with the mac. Also, try booting up from the install disk and repair your disk.

HT1750 my mac will not start

My Imac will not start or boot up

There are a few of things you could try, but success is not guaranteed:
An SMC and PRAM reset:
https://discussions.apple.com/docs/DOC-3603
A Safe Boot:
http://support.apple.com/kb/ht1455
Booting into the Recovery HD to try to effect repairs to the HD with Disk Utility:
http://support.apple.com/kb/HT4718

Will not start only spinning wheel

My two-year old iMac 21.5 will not start. All I get is a gray Apple Screen and the spinner. Before this restart, I changed the permissions for the hard drive to allow the administrator to have access to the whole hard drive. I got a start series of interminable warning saying that certain plug-ins or such had to be replaced.
Can anyone help?

paulfromnyon wrote:
Before this restart, I changed the permissions for the hard drive to allow the administrator to have access to the whole hard drive.
You just hosed the installation. Most OS components require the system to be the owner, not the administrator. All I can suggest is to boot into your bootable backup/clone, wipe the HD, and restore it. It might be possible to boot with your SL install disk and restore a TM backup, but I don't use it. Details in Pondini's Tips.

DVD will not start up?

I insert the disk I wan't to play, and the iMac Super Drive will not start. It accepts the dvd. makes noise like it wants to start, but then makes a winding sound, stutters a few times, then makes the sound as if a dvd was re-inserted, but then it gets to a dead, nothing happening stop. period.cccccccc
If you can suggest any how to fix idea, we would really appreciate it.
Thank You.

What you're describing appears to be a failing or failed optical drive. Take your Mac to your nearest Apple Store or Apple Approved Repair Centre for diagnosis and repair.

Mac will not start. HELP!!

my 17" imac early 2006 will not start it came on yesterday with a fail screen and telling me to hold the power key to restart once i did that the cd drive was going made and no screen and the power light stays on. i have tried holding down the option key cmd+PR and this does nothing. no apple start up tune just a power light and a sound like the hard drive getting ready to start. any help would be great. wanna get fixed before my pc mates give me hard time as i always rave about macs.

Hi
It sounds like you are experiencing kernel panic, if you see that grey screen with multi languages. The cause is usually hardware, possibly RAM. Have a look at this link. It may help you.
http://www.thexlab.com/faqs/kernelpanics.html
It mentions Tiger, but I think you could work with that.
I hope you can get things fixed before your mates come around.
Message was edited by: roam

Will not start even in safe boot after installing latest camera update

MacBook Pro will not start even in safe boot after installing latest camera update.
I started my machine and did a software update. Only the camera update needed. So installed and when required I pressed restart. It restarted and did install. Then restarted again. I expected to get to the login screen and it turned itself off. Tried three more times. Each time shutting off. I unplugged everything, and pressed start waiting for log in window. No it shutdown before the log in window. I then tried safe mode and that did not work either on three more occasions.

I have managed to resolve some issues. I can now restart the machine via a CD boot. If I do cmd C into something like tech tool pro, then restart from that disks menu it restarts every time.
If I try a safe start it shuts down. If I try a normal start it shuts down. I have managed to repair permissions and that cleared up some start up permissions but with no improvement to the boot problem. The only way to load is via the cmd-C boot option. Any other ideas?

OS X will not start in Safe Boot but it does start normally

I have not been able to install updates for TurboTax or Quicken; the updater hangs. Intuit customer support suggested trying to install them while the computer is in Safe Mode. Big surprise: it brings up the Apple screen and the spinner, but after a few minutes the computer shuts down.
It starts normally otherwise; just not in Safe Boot.

but after a few minutes the computer shuts down.If your computer shuts down when attempting a Safe Boot, this means the filesystem check is failing.
You need to boot from your Install CD/DVD by holding the "C" key down while you restart. When the Installer appears you need to select Disk Utility from the menus (which menu it is on varies, do a search).
You can then choose the "First Aid" tab, and click the Repair Disk button. If you are lucky, it will report that it fixed some errors, in which case run it again until it says there are no errors. But given that Safe Boot does this automatically, you are more likely to get an error that it is unable to fix—at least you will see what the error is, and can post it here.
You may need to invest in a third party Disk Repair program like DiskWarrior to fix this. But you must fix it before attempting to install anything else.

MacBook will not start. I have restarted with original CD. I have used Utilities and "no problem" with hard drive. I have reset PRAM. I have tried safe boot. Nothing is work. Gray screen with Apple logo and rotating wheel. Thanks for any suggestions!

MacBook will not start. I have restarted with original CD. I have used Utilities and "no problem" with hard drive. I have reset PRAM. I have tried safe boot. Nothing is work. Gray screen with Apple logo and rotating wheel. Thanks for any suggestions!

Snow Leopard is a Mac OS X version. You say that it's the version you have in your Mac (10.6.8). Do a back up of your files, format the hard drive (using Disk Utility) and reinstall again

My imac will not start - it is hunged up, when I turn it on I see the apple and the little wheel go around and around and nothing happens - what can I do ???

Hello - can anybody help me - my Imac will not start - When I try to start it I just get to see the apple and the wheel that goes around and around HELP !!

Restart in Safe Mode, this will clear some caches. How you do this is when you hear the startup tone hold down the Shift Key until you see the progress bar appear. Let it fully boot, then open System Preferences - Startup Disk and ensure your internal HD is selected and then click Restart to test. If you still don't have luck you should run Apple Hardware Test in Extended Mode, you may need to run the test 2-3 times to report any errors. To run AHT you will need teh ORIGINAL Install Discs that shipped with the computer. Instructions for AHT are in:
http://support.apple.com/kb/HT1509
Have you been backiing up?

G4 iMac will not start normally

My wife's G4 iMac will not start normally. I have used the procedures from http://docs.info.apple.com/article.html?artnum=107393 and the "Disk Utility" on http://docs.info.apple.com/article.html?artnum=106214 to no avail.
When trying to start, a message comes up saying that the computer must be rebooted. Trying to boot in "Safe Mode" fails after an hour and shuts down the computer, and the "Disk Utility" runs for an hour or two and then gives a message that it was unable to repair the "minor error" on the hard-drive.
After force starting the iMac by holding the power button until the command line appears, I tried running fsck, but the commands are unrecognized. However, if I type in "mac-boot" at the command prompt, the iMac will start. I have copied all of my wife's photos, movies and music, and Word and Excel documents, etc. to my XP PC's hard-drive using USB flash drives.
My question is two-fold:
#1. I have heard that "Disc Warrior" is excellent at resolving hard-drive errors. Can anyone comment on "Disc Warrior" and is there anything else out there that someone can recommend?
#2. I bought RAM to bring the total up to one gig, so I was thinking of upgrading the hard-drive and installing Tiger on the new and larger drive while in the "Ball" changing the RAM. What is the maximum capacity hard-drive I can put into the G4 800mhz iMac without any problems and is there any particular model hard-drive that seems to work best?

I tried reading the link that you posted http://www.thexlab.com/faqs/kernelpanics.html but I don't have a disk with the "Apple Hardware Test".
Since I made the post that you replied to, things have gotten worse. I can no longer get onto the internal hard-drive. I have tried many different methods including the methods written about in the linked article you supplied. I can get onto the Installation CD and I can run "Disk Utility" from the CD. I have repaired the file permissions, but when I run "Repair Disk", it runs for about two hours and then suspends operations with a dialog box stating, "First Aid failed. Disk Utility stopped repairing Volume because the following error was encountered: The underlying task reported failure on exit." and then in the progress box after the list of addresses, there is a message:
(in red) Incorrect number of thread records
Invalid leaf record count
Invalid Map Node
Invalid directory Item Count
Invalid directory Item Count
Invalid volume directory Count
Invalid volume file Count
Volume Bit Map needs minor repair
Invalid volume free block count
Volume header needs minor repair
(in green) repairing volume
(in red) The volume could not be repaired
Error: The underlying task reported failure on exit
(in black) 1 HFS volume checked.
(in red) 1 volume could not be repaired because of an error
(in black) repair attempted on 1 volume
(in red) 1 volume could not be repaired.
I recently bought the 1/2gb replaceable RAM and the 1/2gb "Hidden" or "Factory Installed" RAM. I was planning on installing them soon. Since the "Disk Utility" is telling me that there are faults on the internal hard-drive and I have to go into the "Ball" to replace the "Hidden" or "Factory Installed" RAM, I figured that I might as well replace the hard-drive and redo the system.
Unless someone comes up with something I can do which will not cost me much money, I figure that I might as well install the RAM and a 120gb Western Digital Hard-drive that is about a year old, but was only used for a few days in an XP PC. Will the 120gb drive be recognized? I was thinking of partitioning it as 80gb and 40gb partitions. Does that sound good? I would install the OS on both partitions so that I could always boot if there was a failure.

Please can somebody help, my imac will not start up, just chimes, apple sign then spinning cog. I have tried many key codes, no success, would really like to talk to someone.

please can somebody help, my imac will not start up, just chimes, apple sign then spinning cog. I have tried many key codes, no success, would really like to talk to someone.

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.fpsaud com.apple.AirPortBaseStationAgent com.apple.installer.osmessagetracing ' ' 1274181950 464843899 1233118628 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { split("'"${p[41]}"'",b);for(i in b) print b[i];if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { split("'"${p[41]}"'",b);for(i in b) print b[i]".plist";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:|suhel| VALI|ver-r|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

IMac - OS X - Will Not Start / Safe Boot / Boot to CD

Similar Messages

Maybe you are looking for