IMac OSX Lion 10.7.4 loses Wifi after waking up from sleep

So basically just like my title states, when my computer wakes up from sleep about 70% of the time the internet will not work. My mac does see and connect to my network, but something isn't being sent as I have no connection when trying to surf the web. I then reset my modem and router, and it still doesn't work. What fixes my problem is a reboot or Logging out and back in. I don't know why that does the trick but it does. I have looked at http://support.apple.com/kb/DL1501, however this update is only for 10.7.3. Is there something I can do to fix this problem?
As a side note, if I have Parallels Desktop running my iMac's wifi after sleep will not work, but it will work in the Windows 7 parallel. Why is this?

Hello, this has worked for some...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.5.x/10.6.x/10.7.x instructions...
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
For 10.5/10.6, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
Click OK.

Similar Messages

  • Lose connection to external USB hard drive after waking up from sleep

    My Mac lost connection to the external USB hard drive after waking up from sleep. I can still see the folders in the hard drive in Finders, but when I double clip a folder no file within the folder is displayed. I have to reconnect the hard drive with iMac to read its contents.
    May I ask how this happens and is there a solution?
    I'm using Paragon NTFS for Mac OS X to read from and write to NTFS format of USB external hard drive.
    Thanks!

    ... I un-ticked the "put hard disks to sleep when possible" option in the Energy Saver panel in the System Preferences, and it seems the problem is solved. will have to sleep and wake up my iMac to further verify if this is the solution ...
    Alternative advices are always greatly appreciated!

  • I can't be the only one with this issue. MacBook Pro Retina Late-2013 WiFi disconnects after waking up from sleep.

    Did anyone buy a MacBook Pro Retina 13" from Best Buy this Black Friday?
    I'm having an issue where the WiFi disconnects after the MacBook wakes from sleep but only after a couple of minutes.
    Once the WiFi disconnects, I can't reconnect to the same network and sometimes it won't find nearby networks.
    I have to turn off the WiFi and wait for at least 5 seconds before turning it back on for it to auto-reconnect to my home network.
    If I wait less than 5 seconds, it will continue to attempt connection to the home network but won't connect.
    I've tried reformatting and deleting my network configurations as well as resetting my modem, power cycling it, etc.
    I am using 2Wire Gateway modem/router from AT&T on b/g network.
    I've tried connecting to a friend's network under Time Warner Cable and the same issue occurs.
    I exchanged the MacBook at a Best Buy for a brand unopened one (I hope) and the same exact thing happens with this new one.
    Really, I can't be the only one with this issue. Unless in a 0.00001% chance I received two defective units in a row?
    Please.. does anyone have a clue why this is happening?

    You're definitely not the only one.  I have the same issue.  I spent 6 hours over multiple days on the phone with Apple support trying a variety of things (some of which are mentioned above), and none of them worked.  They finally sent me a replacement laptop.  I made sure to try it periodicaly as I was moving files and installing applications to see if I ran into it again and things seemed okay at first but now I am running into the same issue and it is terribly annoying.  I've got 5 other devices that connect to the same router and I've never had this issue with any of them.
    My router is a Linksys E2000.  I haven't tried changing the router channel but I have tried to cnnecting to other networks in the building I live in and I have run into the same issue there.

  • My iPad loses connection after waking away from router even in the next room over.

    I know it's just my iPad, as when other people with iPads are here (or even just with my iPhone), they still have their connection and mine is lost. Or when I go places, people will have their connection pretty far away from their router and my connection is lost. I have rebooted the iPad and nothing. My iPad screen cracked previously so I took it someplace to get it fixed, so I don't know if that has anything to deal with it? Help please!?

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Apple TV loses WiFi Connectively After waking up from sleep

    My Apple TV, software version 3.0.2 (which gives us 1080P btw), works fine, until I put it to "sleep." Later, when I use the Apple TV, it says: "Not connected to the Internet." In effect, my wifi has disappeared from the memory of the Apple TV, and I have to enter the wifi network's password again on the Apple TV.
    I have had this Apple TV for about a year; the problem appeared maybe one month ago.
    I took it to the Apple Store after Apple Care Telephone Support consulted with engineers. The Apple engineers said it could be a hardware problem, and for me to bring my Apple TV to the Apple Store so they could diagnose it. But at the Genius bar, they put it to sleep and woke it up and it never lost connectivity every time. I suggested that as the Apple Engineers wanted the hardware looked at, why doesn't the Apple Store keep my unit, put it to sleep, and wake it the next business day? The genius bar refused, as the problem did not replicate itself at the genius bar. I told them that trying after 10 minutes wasn't enough. They should try it overnight, as I do (go to bed, try it the next day, only to discover that the Apple TV lost it's connection to the WiFi.
    So for now, my work-a-round is that after a few hours, I have to reenter the password for the wifi. I've been reading threads about similar issues with the iPad, but I don't know if the problems are related (technology wise).
    Bottom line: My Apple TV loses its connectivity after being in sleep mode for awhile. Nothing to do with the iTunes store or 3.0.2 as far as I can determine; if I don't put it to sleep I don't lose connectivity.

    Thank you, Jamie Cox1. However, after rebooting the Apple TV, I lose my 1080P; it goes to 720P and takes about 5 minutes or so to reboot. Then I have to set the 1080P again. The good news is that the wifi returns But it is quicker merely to re-enter my password.
    The problem remains: After a while of having the Apple TV in sleep mode, I lose connectivity to my wifi And while I have a complicated password (upper and lower case letters, numbers, and not a dictionary word), it still is quicker to re-enter my password than to wait for the Apple TV to reboot and re-enter the settings for 1080P.
    Thanks anyway; if I only had 720P perhaps this solution might be enough - but I have 1080P.
    I am working with Apple Care; I have reconfigured my wifi twice with Airport Utility, removed all interference (microwaves, cordless phones), and still the problem remains. Apple Care hasn't solved the problem. The Genius Bar at the Apple Store hasn't solved the problem. Re-booting does find the wifi again, but it takes a long time, and then I still have to re-set the resolution to 1080P. So I just re-enter my password each time.
    And that's my update! I appreciate everyone's suggestions. However, the problem remains: after putting the Apple TV in sleep mode, and then later when I want to use the Apple TV, the Apple TV forgets that it is connected to wifi and I have to re-enter my password, or I can take some time and reboot the Apple TV but then while the wifi returns, the 1080P disappears.
    Thank you everyone for all your suggestions
    But the problem remains

  • 27" imac will not turn disply on after waking up from sleeping

    I have 27" imac with 2nd monitor attached.  when in sleep mode the 2nd monitor will wake up but the imac itself will not turn the screen on. (what is funny is that i can log in but the only monitor i can actually see is my 2nd one.) i must play with the power button several times to either get the imac to reboot or to wake up.  any fix out there?

    I have had this same problem with my mid 27inch mac 2011.  I recently yesterday took it to the genuis bar so they could try to give me a solution.  I showed the technicians many threads with my same problem and they acted as if I was crazy and the issue was absurd/ non valid.  This problem only started happening when I upgraded to lion.  I suppose to get the coputer back in a couple of days.  The onl god thing I had going was all the kernal panics that were listed because of the machine having to be restarted everytime.  I will provide any informatio they give me.

  • Ever since upgrading to 10.8.4, iMac has problems after waking up from sleep

    Finder windows are blank and non responsive, with spinning beachball...try to restart Finder, endless beachball...I didn't have this problem at all with 10.8.3...Help!!

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • The App Switcher of Mac OS X Lion doesn't display properly after waking up from sleep

    Hey guys,
    I have a MacBook Pro15 inch Core2Duo 2.66GHz running Mac OS X 10.7.2.
    When my Mac woke up from sleep, sometime the Application Switcher doesn't show the iconc properly like this.
    Other time, it shows the dark icon.
    The color profile setting seems to be messed up. But it only affects certain apps.
    Some of my affected apps are
    Application Switcher
    like attached image
    Icons got darker
    TweetDeckThe app becomes darker overall
    Gaicho Software's XRGThe supposed-to-be orange indicater became red
    Is there any solution to this?
    Thanks in advanced!

    Yes, change your display / colour profile to a different (or the default) profile. Has worked for myself, and many others on other forums.
    Hope that helps...
    D.

  • IMac hangs waking up from sleep mode, what can I do?

    I have an iMac - early 2008, Inter Core 2 Duo, screenshots of full specs attached below.
    I upgraded to Mountain Lion about 3 weeks ago. No problem until 2-3 days ago when the iMac started to 'hang' after waking up from sleep mode.
    I'd try to launch Safari but the icon just bounces on the dock.
    Force quitting all open apps, force quitting Finder. Still nothing.
    Can't shut down unless I hold the power button down.
    Then on restart it says something about an application that was previously unresponsive...try to reopen it or wait 50 seconds (or thereabouts) - I choose the latter option.
    I've tried to do the usual verify/repair permissions and verify/repair disk. No problem found.
    Incidentally, this has only been happening since 'upgrading' to iTunes 11. Coincidence?
    Can someone help?

    Ok, I've done everything suggested above except for running the Disk Utility from the recovery partition, as I will have more time to spend on it tomorrow and that's something I'm too scared to try in a rush....!
    I've made a screenshot of the energy saving settings changed to your suggestion, could you let me know if that's what you meant?
    I really appreciate your help by the way

  • After update to 10.7.1, Wifi retrieved after wake up from sleep?

    Anyone who had "no wifi after wake up from sleep @ MBA 2011 " issue before, is this fixed after 10.7.1 update installed? Any tester please drop your comment.

    In another Mac forum saying that after the 10.7.1 update, need to reset the PRAM to get this issue solved.

  • Waking up from sleep, wifi disconnected

    After waking up from sleep, on my macbook pro retina late 2013, the wifi is always disconnected. I have to open preference, turn off then on again the wifi, this is not a big problem but quite annoying. Anybody experiencing this same issue? Any solution? Thanks alot.
    Flowdzine

    Yes this just started happening like a week ago. I come back from Sleep and it just constantly searches for WiFi networks until I turn WiFi Off and back On
    Late 2013 Retina Pro 13" same problem here. I use a Time Capsule(Ch 1, 149) in one part of the house and a Airport Extreme(Ch 6, 157) on the other end of the house it's happened on both of them.

  • I can't open almost any app on my iMac (OSX Lion 10.7.4). Every time I attempt to do so, the app "unexpedtely quits" and can't go further. This happens with iTunes (when I turn to the iTunes Store), MacApp Store, Software updates an many other apps...

    I can't open almost any app on my iMac (OSX Lion 10.7.4). Every time I attempt to do so, the affected app "unexpedtely quits", showing a window (sort of expanded dialog box) with the log history, wich form a complete report wich is said to be sent to Apple. Despite that this window has a "restart" button, I haven't been able to go any further from this point, as it repeats the process again and again, impeding me to use the affected app.
    This has get to a critical point, as it is afecting apps like iTunes (especifically when I turn to the iTunes Store from within te app), MacApp Store, Software Updates (I can't update anything, given this problem) and many other apps, including Aperture 3, Fusion 4, integrated Dictionary and Wikipedia, as I've been able to verify.
    As far as I'm concerned, it hasn't affected apps like Office, Vectorworks, Pixelmator, iDraw, Quick Note...
    Can anybody help me on this matter?
    Thanks a lot, in advance...
    Marcus

    Use Lion Recovery to repair the startup disk if necessary, or reinstall the Mac OS X.

  • HT2674 I have an iMac purchased in May 2011.  OSX Lion 10.7.3.  I deleted backup file from the external hard drive. Now, the trash can will not empty some of the files deleted.  File folder: "Core Services" contains a locked file: "boot.efi".  It will not

    I have an iMac purchased in May 2011.  OSX Lion 10.7.3.  I deleted backup file from the external hard drive which operates from Time Machine.
    Now, the trash can will not empty some of the files deleted from the backup harddrive.
    The trash contains-- File folder: "Core Services" which contains a locked file: "boot.efi". 
    It will not delete.
    How do I get the trash can empty of these files?

    Yes, the Old Master file has a folder for each year where I find all photos from that specific year. I am attaching a screen shot of the file.
    In the meantime i have managed to download all photos (it did not download any video files though in mpg, avi, 3gp, m4v,mp4 and mov format) to a new iphoto library. Unfortunately the photos are quite mixed and often doubled up. I ma considering to purchase iphoto library which checks all duplicates in iphoto. this will save me a lot of time. What do you think?

  • We have an iMac OSX Lion.I received a CD with photos on it by a friend of mine. She scanned the photos to her computer and gave the disk to me . I installed it yesterday. I can hear the disk spinning but no pictures come up. What would be the problem?

    We have an iMac OSX Lion.  I received a CD with photos on it from a friend of mine. My friend scanned the photos to her computer and gave the disc to me. I can hear the disc spinning but the pictures aren't coming up to view. Before having the iMac I had a Dell computer.  I was able to view the photos at that time. Is there something I can do so I can view them on my iMac? Thank you.

    The information I see in disk utility is the following: MacIntosh HD superdrive. 1TBST31000528A S Media

  • BEST PRINTER TO PURCHASE FOR USE WITH IMAC OSX LION V 10.7.4

    I NEED TO KNOW WHAT PRINTER IS BEST TO USE WITH IMAC RUNNING OSX LION V 10.7.4. THERE WERE NO SUCH THINGS AS COMPUTERS WHEN I WENT TO SCHOOL. I AM A NEW APPLE/MAC USER. SO PLEASE I AM IN NEED OF A ALL-IN-ONE IF POSSIBLE BUT IF THERE IS SOMETHING THAT IS VERY EASY TO USE WITH IMAC OSX LION 10.7.4 AND A USB CABLE THATS OK TOO. THE CATCH IS MY PRINTER DIED SO IT NEEDS TO BE PURCHASED AT WALMART TONIGHT. SO I NEED SEVERAL POSSIBLITIES PLEASE HELP THANKS, JDLASK

    JDLASK wrote:
    I WOULD RATHER NOT PAY MORE THAN ABOUT $125.00 IF POSSIBLE.
    Please don't use all Caps. It's considered shouting. And please don't keep doubling up on your posts.
    Thanks
    Pete

Maybe you are looking for

  • OSB - Accessing Operational Settings within Proxy Service

    Does anyone know if it is possible to access Operation Settings from within a Proxy Service? The use case is instead of logging, we perform auditing by inserting into a database. In certain environments, we would like to turn this off. I would like t

  • Pipeline performance report in sap crm 7.0 web ui

    Hi Experts, The box Weighted sales volume should be unprefilled (not marked as default) in all Pipeline performance reports for all user groups with a possibility to use these reports. Please let me know how to do this settings in to untoggle the The

  • Call control protocols over which technology ?

    Hello, I am a little confused over which call control protocols are used over which layer 2 technologies. My understanding is as follows: - internet ADSL connection to PSTN = VOIP, therefore can use MGCP, H323 or SIP as call control protocols to your

  • Best export format for importing into After Effects or even back into Premiere

    Please look at this video, work in progress. http://www.youtube.com/watch?v=49_wbdKALQk The opening, featuring a ribbon of videos, was created in After Effects, using Digieffects Freeform. The  issue is the poor quality of the videos that are feature

  • Debugger in Oracle

    Debugger in Oracle Mar 23, 2004 2:02 PM Reply Debugger In Oracle What packages does Oracle Use to make debug to procedures, functions, etc. I use Embarcadero Rapid SQL Debugger module and PL/SQL Developer Debugger module and one of these tool don't i