IMac overheating problem? This may help in some cases!

My daughters iMac frequently suffered of a kernel panic after about 2 hours of use. Symptoms lead to suspect overheating of some component. How I fixed the economical way:
http://www.tervis.fidisk.fi/saveimac.html

496/2942
Hi Topias,
Tervetuloa!
Thank you for this excellent page and the useful links.
Glad to know such good contributors like you are around...
A very good work indeed.
Axl
P.S.
The air is meant to be sucked from bottom, through the computer, to the top.
But have you by chance tested the reverse: blowing air from top, through computer, to the bottom?
I mean, with such an external, noisy installation, you can allow yourself pure efficiency (and a more powerful fan), since you don't care anymore about design and noise?

Similar Messages

If you are having battery problems, this may help.

This is how to calibrate the battery.
1. With the battery at a half-full charge or less, connect the device to a power source.
2. After the battery icon appears green, disconnect the device from the power source.
3. On the Home screen, select settings, and then press the center button.
4. Select general, and then press the center button.
5. Select backlight, and then press the center button to toggle through the settings until the backlight is set to always on.
6. Select brightness, and then adjust the brightness to its highest level.
7. Return to the first settings menu, and then click playback.
8. Turn energy saver off
9. Return to the main menu.
10. Select shuffle songs.
11. Make sure it starts to play the songs.
12. Set the device aside and let it play untill it turns off.
13. Once the device turns off, try to turn the device on.
Note If the device turns back on, repeat the process. Wait until it turns off again, and then try to turn it on. Repeat this step until the device no longer turns on.
12. When the device no longer turns on, connect it to a power source.
13. Fully charge the device until the battery icon appears green.
Note Remember to set backlight and brightness to their previous settings.

"Note If the device turns back on, repeat the process. Wait until it turns off again, and then try to turn it on. Repeat this step until the device no longer turns on. "
Sorry, this is the step I was saying is bad advice. Running the device completely down until it shuts off automatically is indeed good advice. Trying to keep powering it back on until will do so no longer is the "bad" step. This is defintely not laid out in the Apple instructions. If you keep trying to turn it off, you will put the Li-Ion into a "deep discharge" state, which has a very definite, proven negative impact on battery life. Li-Ions perform best when they are partially disacharged and recharged multiple times. Trying to run them down to "empty" (which is what the abovstep does) ruins them. In fact, any device using Li-Ions has built-in circuitry designed to prevent this from happening. That's why you're able to turn the iPod back on after you run it all the way. And that's why the circuitry tries to shut it right back off.

This may help who's Having problems with wifi Net...

The epic story First; Then the happy ending at the end of the tribulation?
I have recently upgrade to BtInfinity Option2 and had already a hh3 wich the BT engineer sayd was just fine for the job; I had a exellent speeds of about 75 Mbps up and 20Mbs down aon cabled connection and 35-45 Mbps up and abut 11 Mbps on Wireless connection to the HH3 also my Home Network was working without faults! But this lasted only for about 2-3 weeks!
The HH3 started to go crazy it would reset and restart by it own accord quite often speed dropped to only about 13 up and 1 Mbps down on wireless altough the cable connection was consistent in reaching the same good results as before Home Network was not a problem ever! Phoned BT Customer Service they made me made what they call a " Power cycle" of the sboxes on the wall, HH3, PC reboot etc.. all on the phone and all the procedure took ages! This did Not solve the problem, as a matter of fact at times was getting even lesser speeds on wireless and the HH3 was still going crazy resetting and restarting on its own; Home Network and cable was fine all the time, So I went to another call to BT and got the same results and procedure to go trough "Power Cycle"; the wireless speed and HH3 problem was never resolved! The BT people told me that after all I was getting what should be expected that my cable connection was fine and that probably the fault was on the wify Lan card on my Pc. but it was the same with my other pc and laptop connection!
So I thought that the problem was on The HH3 and decided to order and buy a HH4 and the Broadcom USB dongle to connect with it! BT Never offered me to exchange the Modem for free as I think I was entitled even because the installation date came on the dates they offer a Free HH4 for Upgrading to BTInfinity.
Got the new HH4 and USB dongle delivered, got them installed and powered up as per instructions, and BINGO!!!
Tested and now getting same speeds either by cable or wireless trough the Broadcom USB dongle!! 75 Mbps Down and about 19-20 Mbps Up!!! Hurray!!
But after that discovered and noticed other problems: The Home Network was no Longer working!
I went trough all the setting in the Networking Sharing Settings and every thing was alrigth just the same settings as always and before..the only thing different was that my PC was not Broadcasting on the Home Network, Invisible to all my other devices!
Went to check the wireless settings on my PC and noticed that my old connection trough the Network with my PC Wify card was still there even if not conected, I decided to connect that instead of the Dongle provided and bougth for The HH4 and presto My Home Network appeared again, so as last test went to test wireless speeds and was still better than with the HH3; About 20 Mbs Down and 11 Mps Up good, but not as fast as with Broadcom USB dongle!
At this point I plugged the Dongle again and noticed that both the Pc Wify card and the Dongle were broadcasting to the same HH4 at the same time another decided to connect both to see if they connected, and they did!!
Guess what: Now I got the Maximum Speed of 75-76 Down the Home Network working just fine!
Hope Is going to stay like this for at least 2 years now! BT Infinity looks Great now!
PS:
Another little issue: with use the Dongle gets very hot, and when is too hot the speed drops dramaticcaly to about alf the speed, but if you let it cool down for a minute is going to function just fine again, at the same time I never loose connection because still got the PC Wifi card to connect when I want or need anyway!

I finally got my DCR-HC21 to work a few weeks ago by
unplugging all of the cables connected to my iMac G5,
waiting 4 minutes and then plugging everything back
in. It worked perfectly right after that.
Hello Brian,
I'm about to purchase a DCR-HC21 and wondered if its still working with your iMac G5 after you did your plug-unplug workaround?
TIA for any feedback!

T500 overheating problems - Novice needs help

Like for some others in this forum, my Thinkpad T500 is overheating.
Here are my specs:
Model: T500 (Type: 2055)
Processor: P8600 (2.40GHz)
GPU: ATI Mobility Radeon HD 3650
When I'm doing most regular activities (browsing,emailing, documents), laptop is fine. The unit gets warm underneath, but I've not had problems.
If I'm doing more intensive activities (watching local video,Netflix, or Skyping), laptop starts to heat up enough so that it's uncomfortable on my lap.
When I play games (Nothing crazy intensive: e.g. Minecraft, Civilization 4), and sometimes when I Skype, the unit gets extremely hot underneath and shuts off without warning.
The heat seems to be originating from the left-hand side of the laptop, near the back. Unless I'm mistaken, this is where the GPU is located. And this makes sense, since the overheating seems to be related to graphics-intensive activities.
So, my questions are:
1. How can I diagnose this problem further? What's a good utility to use to monitor heat of GPU and CPU? Anything else I can use ?
2. Are there any settings I can change on my laptop to prevent the automatic shut-downs and excessive heat?
3. I've seen some mention of people cleaning fans, replacing fans / cooling units, or adding thermal paste. Need some advice there too.
Any suggestions are welcome.
Thank you!

Good day and welcome to the community.
If you've never had the machine open to blow out dust from around the fan/heatsink assembly, I'd recommend that first. If you download a copy of your Hardware Manual: http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles_pdf/43y6630_04.pdf , you'll see that by pulling the palmrest, keyboard and keyboard bezel (manual pages 88-90, 92-93 and 102-103, respectively), that you'll expose the top side of the assembly in the upper left. The top view image on page 107 is helpful. The CPU is beneath the end section of the wider heatpipe and the GPU is beneath the narrower.
While holding the blades of the fan stationary (important!), you can use canned air to blow all of the dust from the inside out through the exhaust vents. Once done, button everything up and see if things run cooler. If you're still overheating, you may need to clean off the old thermal compound and apply new, but try the de-dusting first.
Regarding temp monitoring, many folks like TPFanControl: http://www.staff.uni-marburg.de/~schmitzr/donate.html
Scroll about 2/3 down the page for the download link for v0.62 which is the latest. It can be run in monitor-only mode or can be configured to provide a level of control over your fan speed.
Please post back your results from the first step and we can go from there.
Regards.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
PM requests for individual support are not answered. If a post solves your issue, please mark it so.
X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
I am not a Lenovo employee.

Re Time Machine "You do not have appropriate access privileges to save file ".002332b7be8a" warning preventing backups--this may help temporarily

My TM is often giving me the "You do not have appropriate access privileges to save file “.002332b7be8a” in folder “Time Machine Backups”" message when I go to select my backup drive. I've reviewed past archived discussions on this and, like many other people, gotten completely flummoxed trying to find a permanent solution. Tried the suggested fixes via Terminal and it didn't help because I couldn't get through the entire process without Terminal telling me it couldn't find a file or drive. When I can find the time, I'm going to try Tinker Tool to reveal where that numbered file actually is and give it another go.
In the meantime, for those who are desperate to get their TM working again to get at least one backup done, I can offer people a temporary solution that's worked for me.
I've found that restarting my iMac somehow resets TM and usually allows it to do at least one of its automatic backups, sometimes several, before it reverts back to failing and producing that same darn warning message. I only want a backup done once a day, so it's not that inconvenient to go this route.
There's another even quicker method (perhaps a little more risky but hasn't been a problem for me yet) that I've been using more recently, and that is to simply unplug the external while the iMac is on (I close system preferences first though, and make sure TM isn't actually doing anything at the time) then plugging it back in and choosing the backup drive again in the TM system preferences window once that drive has shown up again in the Mac's list of devices. I don't get that warning message when I do this. It works every time for me and so far it hasn't lost or corrupted any data on the external, despite the warning message you get on Macs when you unplug a USB device without ejecting it first. However, do this at your own risk--don't flame me if it backfires on you. If you're of the opinion that it's not wise to unplug the device this way, then fine, go ahead and state such in this thread, but be polite about it.
Hope this helps anyone who's frantic to make a backup without having to start from square one with a whole new complete initial backup (can take many hours to make one) on a fresh external drive.
By the way, I've read somewhere that this problem was fixed with Snow Leopard. Whether that's true is another matter. I'm not quite ready to update to 10.6 for other reasons, even though I bought it, and I figure some other people are also still using 10.5.8 out of fear and loathing around the unknowns of installing a new OS too, so that's why I thought I'd post this message (couldn't find a discussion around this that was still active and not archived).

noodlenose wrote:
My TM is often giving me the "You do not have appropriate access privileges to save file “.002332b7be8a” in folder “Time Machine Backups”" message when I go to select my backup drive.
Wow, I haven't seen that in a looooong time!
Tried the suggested fixes via Terminal and it didn't help because I couldn't get through the entire process without Terminal telling me it couldn't find a file or drive.
Do you mean in #C5 of Time Machine - Troubleshooting?
When I can find the time, I'm going to try Tinker Tool to reveal where that numbered file actually is and give it another go.
It should be at the top level of the drive.
By the way, I've read somewhere that this problem was fixed with Snow Leopard.
Yes. I'm not sure if it was 10.6.0 or one of the early updates, but I haven't seen any reports of this in quite a while.

24" imac overheating problem

This 24" Apple imac computer is fantastic in all ways that I've used it, yet my 24" imac has been recently overheating and shutting down without notice. As a mechanical engineer looking over the design of this flat screen PC at the back I note the cooling fins are the wrong way round for maximum cooling, so assume this is a manufacturing defect because heat rises upwards not downwards.
So do Apple management accept the flaw in the design of the imac 24" with the direction of the cooling ducts and rectify the problem as soon as possible, or do they ignore this problem in the cooling system of many imacs distributed around the world?
The imac 24" is a fantastic machine to use, and by Apple tech turning around the cooling vents by 180 degrees the venting problem will probably disappear.
Sometimes the simplest of solutions are blindingly obvious!!!
Message was edited by: richvid

i get what u mean about the vent, i was thinking the same thing BUT;
i was reading something on wiki a while ago about the OLD apples, i mean real old like the SE (i think)...
- they initially didn't have fans and they used to overheat (more so when people rested papers on top blocking the vents) - but their design was to allow the heated components situated towards the top to actually draw cold air through the bottom of the machine and up inside - past other components and out the top and hence cool it effectively, then apple started using fans...
- i think apple still use a combination of fans and the radiated heat to cool the imacs of today, the components that get hot are situated at the top of the aluminum macs and the aluminum itself heats up allot which makes it radiate the heat outwards like a heatsink and then fan kicks up to help it along when needed, maybe the design of the vent helps this process? i.e. the vent causes the aluminum to heat up more and radiate more heat than if it were the opposite way - perhaps if it were the other way, the fans would have to run a tiny bit higher and possibly over time suck more dust in and create more problems?
couldn't find the article on the apple computers to what im trying to communicate here - dont remember the right terminology to explain it all properly but try researching heatsinks on wiki - heatsinks work on the same sort of process

Activation - This May Help You

First and foremost, remember that there are hundreds of thousands of new AT&T subscribers who have elected to "move their current phone number" over to the AT&T service. So it should be no surprise to anyone during these first few days of glitches.
Some important information when you opt to transfer your old number to this new service:
When going through the online setup you'll be asked for the billing information. This is not the credit card billing information, it is the billing information your previous Cell Phone service is using to bill you. Get a copy of your last statement and put that address in letter-for-letter. If it is all caps but it in all caps. If it says "#" instead of "APT" then put in "#".
My experience: when I enrolled in the online service through iTunes I put in the credit card billing address because that's what all online vendors ask for. I was moving from T-Mobile over to AT&T. First it denied my request altogether and told me to go into an AT&T store for a credit check. I said "be damned!" and tried it again. Still, it was a no go so I hunted for numbers and called AT&T International (1-877-800-3701).
Nice chick helped me and we went through the online information again. When I gave the billing information she asked "Is that the same billing information T-Mobile is using?" I looked at my T-Mobile bill and said - "Well, yes, somewhat. I mean, they have it all in CAPS, abbreviate street as ST, use a 9-digit Zip Code, and don't show our suite number (I run a company, my iPhone doubles as a business phone). "Try changing it to exactly as it appears in the T-Mobile billing..."
I did so and the moment I pushed the "continue" button a "ding" rang out and my OSX Mail program announced a new message. AT&T sent me an email to my Mac.com account to say "Processing Activation - We are currently processing your order. Your order number is xxxxxx.
You will receive an additional e-mail when your order is complete that will provide further instructions to activate your iPhone."
Ok. Good sign. She then said it would take some time because of the thousands of new accounts and transfer for the transfer of the number to complete, maybe as long as 24 hours.
I stood in line in the downtown Apple store for over four hours with five of my employees (ok, we took turns) so I was disappointed in the amount of time it would take to activate. There was nothing to do but wait.
Please note guys: the phone will not work any features until it is activated by AT&T. No iPod, no syncing, no nothing. This was sure to be part of the Apple/AT&T agreement (probably required by AT&T) to ensure AT&T made money on the deal.
I go to bed wake up and still no activation. Every hour I checked and no activation. As the 17th hour approached I said "enuf..." and started dialing. I found a specific phone number to check your AT&T activation on number transfers. Here it is: 1-888-898-7685
I called, explained that I was a doctor (I am!) and needed the phone activated. Again I got a nice female who checked my account and said that it was noted as activated. "Did you try turning it off then on?" "Yes, repeatedly. "Let me do some checking..." and off she went. She was gone about a minute and asked me to try turning the iPhone off and on again and to wait at least a minute before turning it back on. She waited as I did this.
Low and behold the **** thing lit up like a Christmas tree, announced it was activated and while still on the line my mail program starting dinging with "You've been activated... Welcome to AT&T... Congratulations on own your new iPhone..."
So there you go. That's my experience. As of this moment all six of our iPhones (myself and my employees) are all turned on and working. The employees had different services from Verizon, Sprint and T-Mobile. The slowest activations were with T-Mobile.
Opinion: I think Apple has done a tremendous job. Once the waiting line began moving at the downtown store, Apple employees shined! These guys were amazing and like clockwork they took our credit cards, handed us our phones and ushered us right out the door. They had shifts of customers coming in the door and to various cash registers upstairs and down. While in line they kept us all entertained with clowns, musicians, and the general whackos who wanted the City streets. They brought us red wagons of bottled water and thanked us profusely for being so patient.
Activation was a glitch but understandable. Once you are activated you forget the headache because the iPhone is so amazing. We have so much free WiFi here in San Francisco that the internet portion of the iPhone is incredibly fast. Everything on the iPhone works as demonstrated by Steve and the YouTube stuff is mesmerizing and oftentimes funny.
So don't give up. Hang in there. I love my iPhone!
Tim...

AT&T has corrected the activation problems incurred by the initial onslaught of new iPhone buyers. Today activation is a pretty simple process.

Can't get paypal to work? This may help.

Well, 24 hours after my 32 GB ipod touch purchase, I am not an apple fan. I had a very typical experience, I have windows 7 32bit on a Dell XPS laptop M1530, I downloaded a fresh version of iTunes (9.2.1.5), I upgraded the ipod to newest version (iOS4). Why did I spend so much time getting this stuff to work? I did get it to work, but support was useless and blamed microsoft (in fact I didn't do all the steps correctly).
Anyway a few things I figured out. Before you begin, you need a valid paypal account. You also need internet explorer. This doesn't work on Chrome for whatever reason. You can go to start menu -> Default programs to change web requests to open up IE instead of chrome (then just change it back when you are done with paypal activation).
Also, you need to have activated the computer for use with itunes. Why that's not done when you install is a mystery. From the menu bar at the very top of itunes, go to the store menu, and select 'activate my computer'. Note, you can only have 5 active computers, but you can deactivate all of them. The only way to deactivate individual computers is to have them connected to the network and with itunes, and just go store -> deactivate computer. If the computer is not activated the process will also fail when paypal redirects back to the itunes app.
Next, create/update your itunes account. When you get to the payment options, you select paypal. That launches a web browser. Again, chrome didn't work for me. You go through the paypal logins. When you are done you should get two warning messages, one to display only secure or all content (hit 'no'). The other warning mentions that you are launching an app from a web browser. Click allow (or yes or whatever).
The process should bring you back to itunes purchase setup. Scroll down to the bottom, hit 'done'. To verify, I log out and log back in again, and look up your account info. It should have paypal. Note, once you get this set up, you don't really have to screw with it again I think.
The other tidbit I have is that once you download the apps (click the price tag on the app) you need to sync your ipod. If you click on your ipod on the left menu, then click on apps, select all and click apply on bottom right of screen. That should work.

Also, you need to have activated the computer for use with itunes. Why that's not done when you install is a mystery.
Because you don't need an iTunes account tio use or install iTunes.
You cannot authorize the computer until you have an account because that's what you are authorizing.
Note, you can only have 5 active computers, but you can deactivate all of them.
You can have 5 computers authorized at any one time. You can only select Deauthorize all when you do hae 5 authorized and you can only do it one time per year.
Next, create/update your itunes account.
Again you cannot "activate" (which is authorize) unless you have an iTunes account. So you cannot authorize iTunes and then create an iTunes account.

I have an older MacBook Pro Core Duo, I don't know if it is uprgradeable to OS X Mountain lion is it possible to tell via the S/n??? I'm already at Snow Leo. 10.6.8. I'd like to be able to completely bypass OS X Lion this may help determine if this is

I have an older MacBook Pro Core Duo, I don't know if it is uprgradeable to OS X Mountain lion is it possible to tell via the S/n??? I'm already at Snow Leo. 10.6.8. I'd like to be able to completely bypass OS X Lion. Any one have any input that might shed light on my situation? Thanks in advance for your input.

Your MacBook can not be upgraded to Lion or Mountain Lion. Snow Leopard is the highest possible for that model.

I want to try and keep my iMac cooler , would this work ..?

My new iMac 24 inch is working fine , the only thing is its getting very hot on the casing at the top, I think this may be due to the fact it is working in a very hot room, the iMac sits on a nice and clear desk top well away from the wall , the room is well ventilated with all the windows open, but the room temperature get’s very hot and there’s no room air conditioning . I was wondering if I placed a fan on the desk top
To blow some air onto the iMac’s case , this may help reduce the machine from getting hot ..? . Where does the iMac draw its cooling air from , the bottom or top of the casing..? and do you think that putting a fan on the desk would reduce the iMac’s
Casing temperature in any way ..?

Is the ambient temperature within the operating limits stated for the iMac? (Operating temperature: 50°F to 95°F - 10°C to 35°C) If so, why worry about some Heath-Robinson cooling arrangment. If the heat is being dissipated out of the iMac then it's doing the job it's designed to.
If you look at the iStat Pro widget:
are there any that are actually higher than they should be. The metal case of the iMac acts as a heat-sink so it will feel warm in places whereas other computers may be far hotter inside but feel cooler to the touch.
mrtotes

Stuck with problems and no help

hi,
We are stuck with the following set of problems. Repeated entries to this forum have not fetced any response. If anybody can help us on any of these issues, please reply -
1. We are not able to define any custom validator. We made our own validator that extends CompareValidor, but when we try to apply this rule to an attribute in the validation tab, we get the error - "no properties defined". Do i need to do something else besides creating a new class that extends CompareValidator and then writing my own code in the vlaidate method.
2. While deploying our jspApplication on java web server, we are getting the message "error - null". The details are as mentioned in the Topic 'can anyone help!!!' that has been posted by Prabhdeep ().
3. I have two tables, Customer and address. There is no FK between them (there cannot be because address is shared between many entities). In the address, i have 2 fields, BpType and BpId. BpType will contain 'C' to identity that this address is for a customer and id will have the customer id. In jdev 3.1, i have created entity and view objects for the 2 tables. also, i have made a view link. i need to put the condition Address.bpid = customer.customeid and address.bptype = 'c'. but it is not letting me put the second part of the condition. the chk on id works fine. as soon as i add a chk on type and test the application module, then while insertion of address i get the following error - "set method for BpType cannot be resolved".
4. I have made a jsp appl based on bc4j. now, i need to put a check on any entity in such a manner that if the check fails, my jsp should ask the user that an exception is occuring and does he want to save even with the exceptional data. if he says yes, i want that the same entity should now save the data without giving an exception. How do i achieve this interaction between my entity and my jsp.
Thanks a lot for any help,
Aparna.

I will answer Question #3:
I'm not sure if I understand exactly what is
happening. At first I thought you meant that you couldn't even add the second part of the association clause. But, later it sounds like you were able to add the second part of the clause (namely "address.bptype =
'c'") and that you are experiencing some runtime error.
Assuming the latter (that it is a RT problem), I take it this
"...cannot be resolved" error is the error with code 27020.
Under normal error conditions, you shouldn't get this error. Something "unusual" (or unforeseen by us) is happening if you are getting this error. Anyway, if you wrote your own client code, you should wrap a try/catch block around it, pick out the detail exception, and see what's going
on. See the example code below:
try
... make call that causes the exception ...
catch(oracle.jbo.AttrSetValException ex)
// Print stack trace for the outer ex
ex.printStackTrace();
// Get the inner exception
Object[] details = ex.getDetails();
if (details.length > 0)
Exception innerEx = (Exception) details[0];
// Now, print the inner exception's
// stack.
innerEx.printStackTrace();
This will help shed some light on the exception and the cause of it.
John - JDeveloper Team

Help with some explanation of code

Hi
could some one explain how the code in italics works below. Is the varaiable currentObject which has a data type of DragDrop an
array as well that gets loaded up with the string values of the dragdrops array?
public class Map extends MovieClip
        var dragdrops:Array;
        public function Map()
            // constructor code
            dragdrops = [deathvalley,goldengate,grapes,hollywood,
             joshuatree,laketahoe,mission,redwood];
          var currentObject:DragDrop;
            for (var i:uint = 0; i < dragdrops.length; i++)
                currentObject = dragdrops[i];
                currentObject.target = getChildByName(currentObject.name + "_target");
AND THIS CODE I THINK TESTS FOR IF THE OBJECT HITS ITS TARGET BUT I DON'T UNDERSTAND HOW IT WORKS?
if (hitTestObject(target))
                visible = false;
                target.alpha = 1;
                Object(parent).match();

Hi ,
Try to write the code in this type of format.
I think this may help you.
TABLES: bapiache08, bapiacgl08,bapiaccr08, bapiret2.
DATA: t_bapiache08 LIKE TABLE OF bapiache08 WITH HEADER LINE,
t_bapiacgl08 LIKE TABLE OF bapiacgl08 WITH HEADER LINE,
t_bapiaccr08 LIKE TABLE OF bapiaccr08 WITH HEADER LINE,
t_bapiret2 LIKE TABLE OF bapiret2 WITH HEADER LINE,
ct_bapiret2 LIKE TABLE OF bapiret2 WITH HEADER LINE.
t_bapiache08-obj_type = 'BKPFF'. "BKPFF
t_bapiache08-obj_key = '010000000000062005'.
t_bapiache08-obj_sys = 'T90CLNT800'. "T09CLNT800
t_bapiache08-username = 'SSI4'.
t_bapiache08-header_txt = 'DOCUMENT POSTING'.
t_bapiache08-comp_code = '1000'.
t_bapiache08-fisc_year = '2005'.
t_bapiache08-doc_date = '20050805'.
t_bapiache08-pstng_date = '20050805'.
t_bapiache08-fis_period = '07'.
t_bapiache08-doc_type = 'SA'.
t_bapiache08-compo_acc = 'FI'. "GL
APPEND t_bapiache08.
t_bapiacgl08-itemno_acc = '031'.
t_bapiacgl08-gl_account = '160000'.
t_bapiacgl08-comp_code = '1000'.
t_bapiacgl08-pstng_date = '20050805'.
t_bapiacgl08-doc_type = 'SA'.
t_bapiacgl08-fisc_year = '2005'.
t_bapiacgl08-fis_period = '07'.
t_bapiacgl08-stat_con = 'X'.
t_bapiacgl08-vendor_no = '1920'. "ACCOUNTING NO.FOR VENDOR/CREDITOR.
t_bapiacgl08-item_text = 'LINE ITEM TEXT BY VIN'.
APPEND t_bapiacgl08.
t_bapiaccr08-itemno_acc = '031'.
t_bapiaccr08-currency_iso = 'EUR'.
t_bapiaccr08-amt_doccur = '2000'.
APPEND t_bapiaccr08.
CALL FUNCTION 'BAPI_ACC_GL_POSTING_POST'
EXPORTING
documentheader = t_bapiache08
IMPORTING
OBJ_TYPE =
OBJ_KEY =
OBJ_SYS =
TABLES
accountgl = t_bapiacgl08
currencyamount = t_bapiaccr08
return = t_bapiret2
EXTENSION1 =
Thanks & Regards,
Ravi Kanth Yechuri.

Help with some of my music that i imported...

Hi, i buy all of my albums and import them on itunes and my Lady Gaga cd is titled as the Artist Various Artist instead of Just Lady Gaga.... Is There anyway i can fix this. Also In some cases it has split some of my Albums in two or even 4 different album covers yet it is all from the same album... examples :Chris Botti (TO Love Again) or Stevie Ray Vaughan (Texas Flood) it does this because it features different artist, it also does this on rap albums. how can i get it to stop doing this. Another concern is when it doesnt put the album in order or track listing like the way it should be or as it was intended on the album... some albums the track listing is out of order, how can i fix this. Please if you can give me some solutions this would be very helpful. I am a proud Apple/I tunes user, this is not a complaint i just like to keep my library nice and neat thanks!

no, im not sure you get it, either that or i didnt understand the answer... sorry im not very good with itunes yet or very clear with what i mean ha! LEts see what i mean is i have lets see three examples of this... one Nirvana with the lights out its a 3 disc cd of their unreleased songs... now i want those all in one album artwork... or (album) where i dont have to see that disc one ****, same thing with Red Hot Chili Peppers : Stadium Arcadium, i dont want them aranged by cd (Jupitar and Mars or better known as disc one and disc 2) i just want it as Stadium Arcadium with all the tracks listed in order on one Stadium Aracdium artwork. Same for Pearl Jam Lost Dogs i think you might get the point... in the process of trying to figure out of i could combind albums i experiented with the least favorite of the 3 to see if it would work i did the compilation method and now i have 4 album artworks of pearl jam lost dogs a copy of disc one twice with only one song on one of them, same goes for disc 2... so ive fiddled with it.. basically i need to know if the combinding of discs on an album is possible if not no big... also to fix my Pearl JAm one... sorry im such a hassle.

Spaces Big Problem I need help badly!!

When I held down the mouse on the spaces icon in the dashboard i noticed an "options" choice which I selected. There I was offered to assign a hot key. I put in "Z" by mistake (meant to put in Option Z. Now I can't get rid of it so every time I try to type the letter Z up comes a spaces!!! So now I can't ever type the letter. I cannot find the preference to delete to fix this. I tried changing the hot key & it just accepts the new key BUT also keeps the old one. I've searched with spotlite but only find the pref pane not the preference itself. So what do I do? I'm trying to enter the registration key for Toast, which has a Z in it & I'm stuck.
Please help, help, help

Just so others will know if it happens to them. I spent over an hour with a very savy guy at applecare. It was a harrowing experience but he was determined to help without telling me to reinstall the system which I very much appreciated. Long story short after deleting almost all the plist prefs we finally found that the culprit was "Drag Thing"! I had assigned the Z via an option offered when I hilited the Spaces icon in the Drag Thing dock. By setting it there I could NOT get rid of it until I deleted the Drag thing prefs which are in a folder in the user library preferences. All is well now & I hope this may help someone else

Hello I'm from mexico and I have the problem that my ipod touch 5g load not ..... I've been reading and this may in total discharge because I trying it a week and I have not been able to load what do I do? please help

hello I'm from mexico and I have the problem that my ipod touch 5g load not ..... I've been reading and this may in total discharge because I trying it a week and I have not been able to load what do I do? please help

- See:
iPod touch: Hardware troubleshooting
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar

IMac overheating problem? This may help in some cases!

Similar Messages

Maybe you are looking for