IMac remote stops working

Hi guy,
I have not used my imac remote for a while, probably 2 months, so i have no idea to trace the root of the problem but it is dead atm. Nothing happens when i click Menu,Forward,Backward,Up/Down Volumn key, Stop/Play.
I wonder is it a hardware or software issue ?
Im using Mac OS X 10.4.9 on iMac 20'.
Thanks for reading.
iMac 20' inch Mac OS X (10.4.8)

Have you tried replacing the battery?
Good luck.
PM G5, PB G4 17", iMac G5 20", iPod 5G 30GB, iPod Nano 1G, iPod Shuffle 2G Mac OS X (10.4.9) AirPort Extreme (new) WDS with AirPort Express

Similar Messages

Remote stops working when I insert DVD

Since I got my computer two years ago, every once in a while the remote stops working. I go in to System Preferences and disable the infrared receiver, and it works again. In the last week, the remote has stopped working every time I insert a DVD. Pairing or unpairing the remote makes no difference.

Hello ash_Q,
Thanks for using Apple Support Communities.
To troubleshoot issues with the Apple Remote please follow the troubleshooting steps in the article below.
Troubleshooting the Apple Remote
http://support.apple.com/kb/HT1722
Take care,
Alex H.

On iMac 2011 stopped working audio output.

On iMac 2011 stopped working audio output.
Is it possible to transmit a signal through the audio input?

There are many possible causes for this issue. Take each of the following steps that you haven't already tried.
1. Start with the steps recommended in this support article. Don't skip any of the steps. It's the starting point for further efforts to solve the problem.
2. Run Software Update and make sure you have a fully up-to-date installation of OS X.
3. If you've installed an application called "Memory Clean" or any other third-party software that is supposed to "clean" or "purge" memory automatically, remove it according to the developer's instructions and restart. You should do that even if the software is not causing the problem, because it's useless.
4. If you've installed a software equalizer called "Boom" or anything similar, update or delete it and restart.
5. If an AirPlay device is selected for sound output from iTunes (or from other applications via third-party software such as "Airfoil"), deselect it.
6. Launch the application "Audio MIDI Setup" by entering the first few letters of its name in a Spotlight search and selecting it in the results (it should be at the top.) Select the Output tab. If the Mute boxes are checked, uncheck them. Move the Volume sliders all the way to the right.
7. If a red light is coming from the audio-out port, the internal switch is stuck in the position for digital output. You may be able to free it by inserting and removing a mini-stereo jack of the proper size. Inserting any kind of tool in the port may cause damage that won't be covered by your warranty.
If there's no red light, the switch may still be stuck in the headphone position. Try to free it the same way.
8. Disconnect all wired peripherals except keyboard and mouse, if applicable. If more than one display is connected, disconnect all extra ones. Restart and test.
9. If you have a MacBook Air, turn off Bluetooth and restart.
10. Start up in safe mode. Don't log in; just restart as usual when the login screen appears. When you do, make sure the words "Safe Boot" do not appear in the login screen. If they do, the system is still in safe mode and sound won't work.
11. Reset the NVRAM.
12. Reset the SMC.
13. Reinstall OS X after backing up all data.
14. Make a "Genius" appointment at an Apple Store.

Dictation on my new iMac has stopped working on both the internal

Dictation on my new iMac has stopped working on both the internal & external microphones. Any suggestions?

Does the onscreen microphone come up but it doesn't convert speech to text? Or does the onscreen microphone not appear at all?
In System Preferences > Dictation & Speech > Dictation, is the microphone set to "Automatic"? You might try setting it to "Internal microphone" to see if it works.
Have you tried restarting the iMac?

Why do Apple TV remotes stop working?

Why did my Apple TV remote stop working?

Mine isn't working either. Just changed the battery a couple weeks ago. It was working fine yesterday, now it won't work at all. I also tried resetting the Apple TV and pairing the remote (holding down menu and rewind for 6 seconds close to the device). Anyone?

IMAC suddenly stops working Mouse,keyboard, wifi all stops responding. PLEASE HELP

iMAC suddenly stops working,display is on but key board and mouse does not respond.I changed keyboard with usb also but still same.even wifi stops working also.PLEASE HELP before there was some kernel panic errors , i updated every thing, installed an original osx mountain Lion. taken to Apple service center. They found nothing wrong with hard ware. But i am having still the same problems. It just stops responding to keyboard, mouse even wifi goes off some time. I thought it may be keyboard mouse problem so i changed them to normal usb keyboard and mouse but still the same. PLEASE PLEAE HELP. -------- LAST ERROR REPORT IS BELOW Interval Since Last Panic Report: 687085 sec Panics Since Last Report: 2 Anonymous UUID: 48C67BCC-4ADB-0131-8FCC-DBD9C01FBB0C Fri Jul 19 17:23:01 2013 panic(cpu 0 caller 0xffffff80096b8655): Kernel trap at 0xffffff7f8a53f351, type 14=page fault, registers: CR0: 0x000000008001003b, CR2: 0x0000000000000060, CR3: 0x000000000bf36000, CR4: 0x0000000000000660 RAX: 0x0000000000000000, RBX: 0x0000000000000000, RCX: 0x0000000000000018, RDX: 0x0000000000000004 RSP: 0xffffff8089c4ba60, RBP: 0xffffff8089c4ba80, RSI: 0x0000000000000060, RDI: 0x00000000ffffff8f R8: 0x00000000000000ff, R9: 0x0000000000000019, R10: 0xffffff8074831004, R11: 0x0000000000000008 R12: 0x0000000000000000, R13: 0xffffff807482e0ec, R14: 0x00000000ffffffff, R15: 0x0000000000000000 RFL: 0x0000000000010297, RIP: 0xffffff7f8a53f351, CS: 0x0000000000000008, SS: 0x0000000000000010 Fault CR2: 0x0000000000000060, Error code: 0x0000000000000000, Fault CPU: 0x0 Backtrace (CPU 0), Frame : Return Address 0xffffff8089c4b700 : 0xffffff800961d626 0xffffff8089c4b770 : 0xffffff80096b8655 0xffffff8089c4b940 : 0xffffff80096ce17d 0xffffff8089c4b960 : 0xffffff7f8a53f351 0xffffff8089c4ba80 : 0xffffff7f8a525ff5 0xffffff8089c4bac0 : 0xffffff7f8a53a352 0xffffff8089c4bb50 : 0xffffff7f8a50da56 0xffffff8089c4bbb0 : 0xffffff7f8a4e5c36 0xffffff8089c4bbf0 : 0xffffff7f8a4e71b4 0xffffff8089c4bc20 : 0xffffff7f8a547d3c 0xffffff8089c4bc50 : 0xffffff7f8a4fad5b 0xffffff8089c4be00 : 0xffffff7f8a4f8a9e 0xffffff8089c4be40 : 0xffffff7f8a4fee0e 0xffffff8089c4be80 : 0xffffff7f8a5454df 0xffffff8089c4beb0 : 0xffffff7f8a58c82e 0xffffff8089c4bf00 : 0xffffff8009a4b1ab 0xffffff8089c4bf60 : 0xffffff800963e25e 0xffffff8089c4bfb0 : 0xffffff80096b3137 Kernel Extensions in backtrace: com.apple.driver.AirPort.Atheros40(600.72.2)[EBF8D6E8-59C6-3C1C-9549-32DDA193B1 D2]@0xffffff7f8a4ad000->0xffffff7f8a5f5fff dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f89c83000 dependency: com.apple.iokit.IO80211Family(530.4)[E86BEE31-8EE0-34BE-A53F-2571D85CC628]@0xff ffff7f8a43e000 dependency: com.apple.iokit.IONetworkingFamily(3.0)[F02560D1-ADE6-3AD9-8D05-43CB2B7C8B87]@0 xffffff7f89ddc000 BSD process name corresponding to current thread: kernel_task Mac OS version: 12E55 Kernel version: Darwin Kernel Version 12.4.0: Wed May 1 17:57:12 PDT 2013; root:xnu-2050.24.15~1/RELEASE_X86_64 Kernel UUID: 896CB1E3-AB79-3DF1-B595-549DFFDF3D36 Kernel slide: 0x0000000009400000 Kernel text base: 0xffffff8009600000 System model name: iMac10,1 (Mac-F2268DC8) System uptime in nanoseconds: 397672779228 last loaded kext at 256566570174: com.apple.filesystems.msdosfs 1.8.1 (addr 0xffffff7f8b624000, size 65536) last unloaded kext at 363393284081: com.apple.filesystems.msdosfs 1.8.1 (addr 0xffffff7f8b624000, size 57344) loaded kexts: com.apple.filesystems.smbfs 1.8.4 com.apple.driver.AudioAUUC 1.60 com.apple.driver.AppleHDA 2.3.7fc4 com.apple.driver.AppleMikeyHIDDriver 122 com.apple.driver.AGPM 100.12.87 com.apple.driver.AppleHWSensor 1.9.5d0 com.apple.driver.AppleUpstreamUserClient 3.5.10 com.apple.kext.AMDFramebuffer 8.1.2 com.apple.driver.AppleMikeyDriver 2.3.7fc4 com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0 com.apple.driver.AppleLPC 1.6.0 com.apple.driver.AppleBacklight 170.2.5 com.apple.driver.AppleMCCSControl 1.1.11 com.apple.ATIRadeonX2000 8.1.2 com.apple.iokit.IOUserEthernet 1.0.0d1 com.apple.iokit.IOBluetoothSerialManager 4.1.4f2 com.apple.Dont_Steal_Mac_OS_X 7.0.0 com.apple.driver.ApplePolicyControl 3.4.5 com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport 4.1.4f2 com.apple.filesystems.autofs 3.0 com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1 com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1 com.apple.BootCache 34 com.apple.driver.AppleIRController 320.15 com.apple.iokit.SCSITaskUserClient 3.5.5 com.apple.driver.AppleUSBCardReader 3.1.7 com.apple.driver.XsanFilter 404 com.apple.iokit.IOAHCIBlockStorage 2.3.1 com.apple.driver.AppleUSBHub 5.5.5 com.apple.driver.AppleFWOHCI 4.9.6 com.apple.driver.AirPort.Atheros40 600.72.2 com.apple.driver.AppleRTC 1.5 com.apple.driver.AppleAHCIPort 2.5.2 com.apple.nvenet 2.0.19 com.apple.driver.AppleUSBEHCI 5.5.0 com.apple.driver.AppleUSBOHCI 5.2.5 com.apple.driver.AppleEFINVRAM 1.7 com.apple.driver.AppleHPET 1.8 com.apple.driver.AppleACPIButtons 1.7 com.apple.driver.AppleSMBIOS 1.9 com.apple.driver.AppleACPIEC 1.7 com.apple.driver.AppleAPIC 1.6 com.apple.driver.AppleIntelCPUPowerManagementClient 196.0.0 com.apple.nke.applicationfirewall 4.0.39 com.apple.security.quarantine 2.1 com.apple.driver.AppleIntelCPUPowerManagement 196.0.0 com.apple.driver.DspFuncLib 2.3.7fc4 com.apple.iokit.IOAudioFamily 1.8.9fc11 com.apple.kext.OSvKernDSPLib 1.6 com.apple.driver.IOPlatformPluginLegacy 1.0.0 com.apple.driver.AppleSMBusPCI 1.0.11d0 com.apple.driver.IOPlatformPluginFamily 5.3.0d51 com.apple.driver.AppleBacklightExpert 1.0.4 com.apple.driver.AppleSMBusController 1.0.11d0 com.apple.kext.AMD4600Controller 8.1.2 com.apple.kext.AMDSupport 8.1.2 com.apple.iokit.IOSurface 86.0.4 com.apple.iokit.IOSerialFamily 10.0.6 com.apple.iokit.IOBluetoothFamily 4.1.4f2 com.apple.driver.AppleGraphicsControl 3.4.5 com.apple.iokit.IONDRVSupport 2.3.7 com.apple.iokit.AppleBluetoothHCIControllerUSBTransport 4.1.4f2 com.apple.kext.triggers 1.0 com.apple.iokit.IOFireWireIP 2.2.5 com.apple.driver.AppleSMC 3.1.4d2 com.apple.driver.AppleHDAController 2.3.7fc4 com.apple.iokit.IOGraphicsFamily 2.3.7 com.apple.iokit.IOHDAFamily 2.3.7fc4 com.apple.iokit.IOUSBHIDDriver 5.2.5 com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.5.5 com.apple.iokit.IOBDStorageFamily 1.7 com.apple.iokit.IODVDStorageFamily 1.7.1 com.apple.iokit.IOCDStorageFamily 1.7.1 com.apple.iokit.IOSCSIBlockCommandsDevice 3.5.5 com.apple.iokit.IOUSBMassStorageClass 3.5.1 com.apple.driver.AppleUSBMergeNub 5.5.5 com.apple.driver.AppleUSBComposite 5.2.5 com.apple.iokit.IOAHCISerialATAPI 2.5.1 com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.5 com.apple.iokit.IOUSBUserClient 5.5.5 com.apple.iokit.IOFireWireFamily 4.5.5 com.apple.iokit.IO80211Family 530.4 com.apple.iokit.IOAHCIFamily 2.3.1 com.apple.iokit.IONetworkingFamily 3.0 com.apple.iokit.IOUSBFamily 5.6.0 com.apple.driver.NVSMU 2.2.9 com.apple.driver.AppleEFIRuntime 1.7 com.apple.iokit.IOHIDFamily 1.8.1 com.apple.iokit.IOSMBusFamily 1.1 com.apple.security.sandbox 220.3 com.apple.kext.AppleMatch 1.0.0d1 com.apple.security.TMSafetyNet 7 com.apple.driver.DiskImages 345 com.apple.iokit.IOStorageFamily 1.8 com.apple.driver.AppleKeyStore 28.21 com.apple.driver.AppleACPIPlatform 1.7 com.apple.iokit.IOPCIFamily 2.7.3 com.apple.iokit.IOACPIFamily 1.4 com.apple.kec.corecrypto 1.0 Model: iMac10,1, BootROM IM101.00CC.B00, 2 processors, Intel Core 2 Duo, 3.06 GHz, 4 GB, SMC 1.53f13 Graphics: ATI Radeon HD 4670, ATI Radeon HD 4670, PCIe, 256 MB Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1067 MHz, 0x802C, 0x31364A53463235363634485A2D3147314631 Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1067 MHz, 0x802C, 0x31364A53463235363634485A2D3147314631 AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.72.0-P2P Bluetooth: Version 4.1.4f2 12041, 2 service, 18 devices, 1 incoming serial ports Network Service: Ethernet, Ethernet, en0 Network Service: AirPort, AirPort, en1 Serial ATA Device: Hitachi HDE721010SLA330, 1 TB Serial ATA Device: HL-DT-ST DVDRW GA11N USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0x24400000 / 2 USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0x26500000 / 2 USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x04500000 / 4 USB Device: USB Keyboard, 0x04f2 (Chicony Electronics Co., Ltd.), 0x0111, 0x04300000 / 3 USB Device: Microsoft Notebook Optical Mouse with Tilt Wheel, 0x045e (Microsoft Corporation), 0x00d2, 0x04100000 / 2 USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06100000 / 2 USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0x06110000 / 3

That panic was not caused by third-party software. If the problem is recurrent, the possibilities are:
A stale or corrupt kernel cache
A damaged OS X installation
A fault in a peripheral device, if any
Corrupt non-volatile memory (NVRAM)
An internal hardware fault (including incompatible memory)
An obscure bug in OS X
You may already have ruled out some of these.
Rule out #1 by booting in safe mode and then rebooting as usual. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
You can rule out #2 and #3 by reinstalling the OS and testing with non-essential peripherals disconnected and aftermarket expansion cards removed, if applicable. Sometimes a clean reinstallation (after erasing the startup volume) may solve a problem that isn't solved by reinstalling in place, without erasing.
Corrupt NVRAM, which rarely causes panics, can be ruled out by resetting it.
If your model has user-replaceable memory, and you've upgraded the memory modules, reinstall the original memory and see whether there's any improvement. Be careful not to touch the gold contacts. Clean them with a mild solvent such as rubbing alcohol. Aftermarket memory must exactly match the technical specifications for your model. Memory that is either slower or faster than specified may be incompatible.
The Apple Hardware Test or Apple Diagnostics, though generally unreliable, will sometimes detect a fault. A negative test can't be depended on. Run the extended version of the test.
In the category of obscure bugs, reports suggest that FileVault may trigger kernel traps under some unknown conditions. Most, though not all, of these reports seem to involve booting from an aftermarket SSD. If those conditions apply to you, try deactivating FileVault.
Connecting more than one display is another reported trigger for OS X bugs.
If your system is not fully up to date, running Software Update might get you a bug fix.
In rare cases, a malformed network packet from a defective router or other network device can cause panics. Such packets could also be sent deliberately by a skillful attacker. This possibility is something to consider if you run a public server that might be the target of such an attack.
If none of the above applies, make a "Genius" appointment at an Apple Store to have the machine tested. You may have to leave it there for several days. There isn't much point in doing this unless you can reproduce the panic, or if you can't, it happens often enough that it's likely to be repeated at the store. Otherwise you may be told that nothing is wrong.
Print the first page of the panic report and bring it with you.
Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you know how to restore, and you have at least two independent backups.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
*An SSD doesn't need to be zeroed.

Apple Remote stopped working with Lion on iMac

My white Apple Remote does not work with Lion on my iMac 2.4ghz Core 2 Duo anymore.
I'm sure it was working recently as I was able to control the volume on my RadioShark application. Now that doesn't work anymore and I can't seem to get the remote to work with anything.
I've tried restarting my iMac, swapping the remote's battery, and using another remote but still no success. The only response I get is from the remote's 'Menu' button which, when pressed, toggles between two graphics on screen - one a four-way arrow indicator with a centre button, and the other what appears to be a Forward/Back, Centre button with corner indications for Expand/Shrink.
I've tried the 'Pair' option but pressing 'Menu' and 'Fast Forward' does nothing on screen - no sign of the chain-link 'Paired' symbol. Neither of the white remotes I tried is 'Paired' with the iMac.
It seems I must have done something to cause this but can't think of any change I made that could be responsible. I know Front Row is no longer accessible in Lion, but is there any other app I could test my remote on? Any kind of hardware reset needed? (unlikely, I know, with two separate remotes showing the problem).
Anyone have any ideas?
Thanks.

I'm replying to my own question because my remotes are working again.
I'm not sure what I did to fix the issue, but I tried shutting down all open applications (I remembered that by default Lion re-opens with everything as it was). And shortly afterwards I got full functionality back for my Apple Remote.
I'm not sure what caused the issue. I did install Easy Timeline, which I'd downloaded today from the Mac App Store. It has Apple Remote functionality, so I'm not sure if it was in some way implicated. It's working now with my remote, as is iTunes, and RadioShark.
Weird!

Toshiba All-in-One DX1210 - remote stopped working

Hi,
I have a DX1210 (PQQ09A-02900G), and I have an issue where the remote works fine when I start the machine for about 15-20 mins, then it just stops working.
There are no errors and can't find anything in the event logs.
Only way to get it to work again is reboot or put it to sleep and wake it up again.
Still only lasts another 15 mins or so again.
Anyone come across this before? Running Win7 64bit.
Cheers,
Nathan

Hi
Did you check if driver reinstallation/update would fix this issue?
I think you should check this
There is an driver called Winbond CIR Driver
http://www.mytoshiba.com.au/support/computers/all-in-one/dx1210/pqq09a-02900g/download?os=25
You should uninstall this firstly and after new reboot, install this package again.

How do I access my iMac remotely when working away from the office?

I work away from the office for much of the time. How can I access my iMac remotely?

Unless this is critcal for some reason I would not do this. Unless you understand all the techinolticcal pit falls you can leave your computer dangerusly exposed doing this. If you are not technical your best bet is going to be to get a wireless router with built in VPN support ($200 - $500) to give you a secure connection home. And then you will need the Apple Remote Desktop app ($90 I think) and even then it will only work if your work compute is also a Mac. There are probably other comerial apps that will let you remote into your Mac desktop on windows but will probably be in the $200 price range.

IMac SuperDrive stopped working with Mountain Lion 10.8.2

HELP! My IMac was patched last yesterday and the SuperDrive has stopped working. The drive is empty but I cannot insert a CD into it.
Should I have to await another patch from Apple? Can someone recommend another solution I can use today?
Support folks:
L-DT-ST DVDRW GA32N:
Firmware Revision:          KC12
Interconnect:          ATAPI
Burn Support:          Yes (Apple Shipping Drive)
Cache:          1024 KB
Reads DVD:          Yes
CD-Write:          -R, -RW
DVD-Write:          -R, -R DL, -RW, +R, +R DL, +RW
Write Strategies:          CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media:          To show the available burn speeds, insert a disc and choose File > Refresh Information
Thanks

@BDAqua, Thank you for taking the time to respond.
When I insert a disc into the drive, the drive does not load it. Until yesterday, before the latest patch was applied, the drive used to sense that a disc was being inserted, it would automatically draw it in and load it.
Brian at Apple Support led me through the PRAM reset and also a filesystem check but neither of them resolved the issue. I guess I am now faced with two possible options
a) reinstall Mountain Lion from scratch (reminds me of the days when I was using Windows, never expected to get into a similar situation with a Mac!), or
b) there is a hardware failure, coincident with the patches applied yesterday
Are there any other options?
Thanks

My Imac 17" stopped working, repair says Motherboard? Help!

My trusty 17' Intel Imac stopped working, repair shops says its the motherboard and can not be repaired. Any suggestions? Help!
Thank you - Jeff

Time for a new iMac. Even if you could find another shop that would repair it, it wouldn't be worth putting a lot of money in. Better use of the money to put towards a new or refurb.

IMON Remote stopped working after update?

Hi,
I have an IMON_PAD remote which simply worked out of the box since the chassis got setup; it's an Origenae S21T - LCD (Monitor) Touch Screen chassis.
As my device is the newer model things should just have worked with the kernel driver and no need for Lirc however, after the update to kernel version 3.17.1-1 x64 and reboot things stopped functioning and I can't work out why.
The output of lsusb is:
Bus 001 Device 006: ID 15c2:0036 SoundGraph Inc. LC16M VFD Display/IR Receiver
checking proc the device is mentioned as:
I: Bus=0003 Vendor=15c2 Product=0036 Version=0003
N: Name="iMON Panel, Knob and Mouse(15c2:0036)"
P: Phys=usb-0000:00:14.0-13.3/input1
S: Sysfs=/devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13.3/1-13.3:1.0/input/input13
U: Uniq=
H: Handlers=kbd event13 mouse0
B: PROP=0
B: EV=100007
B: KEY=10800320 200000200000000 30000 400110000 411000000801 e168000000000 10000002
B: REL=103
I: Bus=0003 Vendor=15c2 Product=0036 Version=0003
N: Name="iMON Remote (15c2:0036)"
P: Phys=usb-0000:00:14.0-13.3/input0
S: Sysfs=/devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13.3/1-13.3:1.0/rc/rc0/input14
U: Uniq=
H: Handlers=kbd event14
B: PROP=0
B: EV=100013
B: KEY=fff 0 4400000108c0320 2d5008000000000 30000 400119000 418614000801 809e168000000000 200000010004002
B: MSC=10
Running lsmod the module is loaded:
rc_imon_pad 12397 0
imon 29693 0
rc_core 22437 3 imon,rc_imon_pad
usbcore 199381 10 uas,imon,pvrusb2,btusb,usbtouchscreen,usb_storage,ehci_hcd,ehci_pci,usbhid,xhci_hcd
The issue starts when trying to run "ir-keytable -t".... the basic output shown is this:
Found /sys/class/rc/rc0/ (/dev/input/event14) with:
Driver imon, table rc-imon-pad
Supported protocols: RC-6 other
Enabled protocols: other
Name: iMON Remote (15c2:0036)
bus: 3, vendor/product: 15c2:0036, version: 0x0003
Repeat delay = 500 ms, repeat period = 125 ms
Running in Verbose mode:
Found device /sys/class/rc/rc0/
Input sysfs node is /sys/class/rc/rc0/input14/
Event sysfs node is /sys/class/rc/rc0/input14/event14/
Parsing uevent /sys/class/rc/rc0/input14/event14/uevent
/sys/class/rc/rc0/input14/event14/uevent uevent MAJOR=13
/sys/class/rc/rc0/input14/event14/uevent uevent MINOR=78
/sys/class/rc/rc0/input14/event14/uevent uevent DEVNAME=input/event14
Parsing uevent /sys/class/rc/rc0/uevent
/sys/class/rc/rc0/uevent uevent NAME=rc-imon-pad
/sys/class/rc/rc0/uevent uevent DRV_NAME=imon
input device is /dev/input/event14
/sys/class/rc/rc0/protocols protocol other (enabled)
/sys/class/rc/rc0/protocols protocol rc-6 (disabled)
Found /sys/class/rc/rc0/ (/dev/input/event14) with:
Driver imon, table rc-imon-pad
Supported protocols: RC-6 other
Enabled protocols: other
Name: iMON Remote (15c2:0036)
bus: 3, vendor/product: 15c2:0036, version: 0x0003
Repeat delay = 500 ms, repeat period = 125 ms
and finally the output from logs:
Oct 29 20:08:04 HTPC1 kernel: Registered IR keymap rc-imon-pad
Oct 29 20:08:04 HTPC1 kernel: imon 3-13.3:1.0: iMON device (15c2:0036, intf0) on usb<3:6> initialized
Oct 29 20:08:04 HTPC1 kernel: imon 3-13.3:1.1: iMON device (15c2:0036, intf1) on usb<3:6> initialized
Oct 29 20:08:04 HTPC1 kernel: usbcore: registered new interface driver imon
Oct 29 20:08:04 HTPC1 kernel: imon 3-13.3:1.0: Looks like you're trying to use an IR protocol this device does not support
Oct 29 20:08:04 HTPC1 kernel: imon 3-13.3:1.0: Unsupported IR protocol specified, overriding to iMON IR protocol
I'm not sure if something is conflicting or if the kernel is thinking that this is the older remote that needs to be used with Lirc but I'm really stuck on how to fix this. I can tell the receiver and remote are working as both sides blink when sending a signal, also I can power up the box using the remote "ON" button.
Would somebody be able to suggest something or help out in some way? This really should be plug and play as the driver is already in the kernel but obviously it seems to still have issues.....
Many thanks.

I know I'm in an ArchLinux-Board ...
... but I have on my XUbuntu with Kernel 3.13.0-40 the same problem with my IMON PAD.
Could this patch help me, too? And - if yes - how can I apply it?
Quite desperate since about >2 weeks, wife and children already haul me over the coals :-O
TIA!
HG

Keynote Remote - Stops working

Hi,
My remote seems to work fine at first, but if I don't switch the slide for say 5 minutes, it seems to stop working. I see the current slide but if I try to switch, it won't let me. No error message or anything. Anyone having a similar problem or know of a way to turn on some debugging?
Thanks,
-chris

I dont have iOS devices but could this Apple knowledge base item help?
Using Keynote Remote

My FaceTime on my iMac has stopped working but it still works on my ipad whats wrong

My facetime on my imac has suddenly stopped working and will not accept my password, it still works on my ipad what is wrong

Either the physical drive or the enclosure electronics has failed. The light you are seeing is powered by the USB connection, the power, electricity, all USB ports put out. That doesn't mean the actual physical hard drive or the USB to SATA bus electronics are working properly. If it doesn't show in Disk Utility then it is DEAD.
Most of the time it is the enclosures electronics that fail. Removing the physical drive from the enclosure and put it in another enclosure or using a SATA to USB adapter, one that has it's own AC power supply, might allow you to get the files off the drive.

Wired Remote stopped working.. PLEASE HEL

I got the zen a few months ago, with little problems thus far. Last month, my headphones decided to stop working. No big deal, I am very acti've so I figured I was just too rough with them. I bought some new phones, Sony in ear types. Recently, my Wired Remote has stopped working. It will work some days, and then stop working just like that.
I am just wondering if this has happened to anyone else out there.. and if so, how they solved their problem.
Please help, and thanks.

The wired remotes are notoriously badly made - you'll probably need to contact Creative support to get it replaced.

IMac remote stops working

Similar Messages

Maybe you are looking for