IMac running Lion will not read windows 7 dvd

Hello-
I am currently trying to partition a part of my hard drive to run Windows 7. I open boot camp assistant and get all the way to where it says "install", I insert the windows 7 dvd and my imac spins it then spits it back out. I have tried several different things yet the results are all the same. I thought the drive may be bad so I tried a normal dvd and a cd, both read fine. I then tried an apple install dvd (lion) and the imac could not read that disc. So the problem seems to be that my computer just can't read install or data dvd's. Has anyone else had this issue?

If you want to run MS Windows Simultaneously with OS X you can buy either Parallels or VMWare Fusion. Follow the installation instructions for the app you choose, both do the same thing. There are several advatages of using Parallels or Fusion including:
1. Running OS X & Windows simultaneously
2. You can run Windows XP, Vista and/or Windows 7
You can also use Boot Camp which comes with OS X to run Windows 7. The downside is you can only run one operating system at a time, either MS Windows or OS X. If you are a Windows gamer this is the best option for 3D gaming. In order to install follow the instructions in Boot Camp Assistant, you can find BCA in Applications - Utilities - Boot Camp Assistant and then follow the on-screen instructions.

Similar Messages

Brand new iMacs with Lion will not read DVD-R

Our business has just purchased 3 x brand new iMacs (3.4Ghz) pre-loaded with OSX Lion 10.7.2 and NONE of them will read a DVD-R containing important files I need to access. However, the trusty 2 year old iMac running Snow leopard sees the files instantly....what's wrong with Lion...?
My 2 year old MacBook pro was updated with Lion a few months ago and hey, it stopped reading DVD-R's....how interesting....! It can't be ALL of the superdrives failing, so it's obviously a fault with the OS...seems to be a VERY common problem, so what's the problem in getting it fixed?

Contact Apple Service, iMac Service or Apple's Express Lane. Do note that if you have AppleCare's protection plan and you're within 50 miles (80 KM) of an Apple repair station, you're eligible for onsite repair since yours is a desktop machine.

My iMac running lion will not sleep if an external HDD is connected.

My Imac will not sleep if the external HDD is connected. This just began to occur. If I unplug the drive it goes to sleep. This doesn't happen with any oter USB pereferals.
Thanks in advance.

From the menu bar, select
 ▹ System Preferences... ▹ Network
Click the Assist me button and select Assistant. Follow the prompts. How far do you get?

My 2008 Mac Pro running Lion will not play HDV1080i60 footage in FCP 7. When I open the sequence settings, all HDV codecs are hdv1, hdv2, hdv3, and so forth. Anyone have any idea how to fix this?

My 2006 - 2008 Mac Pro running Lion will not play HDV 1080i60 footage in FCP 7. When I open the sequence settings, all HDV codecs are hdv1, hdv2, hdv3, and so forth. However, when I open the project on my other Mac Pro running Snow Leopard and FCP 6, the footage works fine as it does on my newer Imac running Mavericks and FCP 7. I have tried a Quicktime update on the Mac Pro that the footage doesn't work on but it says that I already have the newest version of Quicktime installed. I have also tried reinstalling the Final Cut Pro Studio twice, still no fix. I'm completely out of solutions and need to be able to edit HDV footage on this machine. Any help would be great. Thanks.

there was a recent software update that seemed to screw HDV up. Do some searching here over the last month or 2 and you'll find a bunch of posts and some possible solutions.
Worst case scenario, do as Shane suggests. But might I suggest you take a look at the user tips section of the forum. there are some great tips on how to prevent these sorts of problems by cloning your startup drive, etc.

My macbook running Lion will not open large jpgs.

my macbook running Lion will not open large jpgs. looks like anything over 3 mb does not get a thumbnail image and when i try to open the file I get the message " It may be damaged or use a file format that Preview doesn’t recognize". smaller files open without any problem. what to do? thanks

It should open. I have jpegs lager and they open. Try launching Preview and opening it from within the command-o window.

My macbook pro running lion will not boot . it stays on the grey page with the cog spinning. I have tried all methods of booting to no avail. I have removed the bottom and taken out the battery and the ram . will this affect my applecare warranty.

my macbook pro running lion will not boot . it stays on the grey page with the cog spinning. I have tried all methods of booting to no avail. I have removed the bottom and taken out the battery and the ram . will this affect my applecare warranty. I had to try myself as I'm overseas for two months and nowhere near any sort of help .

there was a recent software update that seemed to screw HDV up. Do some searching here over the last month or 2 and you'll find a bunch of posts and some possible solutions.
Worst case scenario, do as Shane suggests. But might I suggest you take a look at the user tips section of the forum. there are some great tips on how to prevent these sorts of problems by cloning your startup drive, etc.

Macbook pro running,lion will not boot

My mac book,pro running lion will not complete the start up/boot have tried single user boot, and command v any ideas

I had the same problem... I was downloading the latest update (whatever it was for, I forget at this point)...
I was really frustrated because I have never had to troubleshoot my MacBook Pro (early 2008 or whatever was before the black bevel/chicklet keyboard), plus I was running Lion, so I did not know how to do any recovery.
Cmd + R worked like a charm. Repaired my disk, repaired my permissions, then reinstalled (or restored) Lion... now my computer is actually running better than before!
The Disk Repair feature in Lion works magic!

I have just put iCloud on my computer this week. I have had multiple issues with it and my computer not working. Thought I worked most of the bugs out with updates etc, but now it will not read my dvd's or audio books. Why is this?

Not sure what to do? My disk drive will not read my dvd's or audio books. Was working fine till I upgraded my comp with Icloud.

I am a very novice user. Here goesl I have a MacBook Pro 2.53 GHz intel Core i5. 4gb 1067 MHz DDR3.
OSX 10.9

Bootcamp will not read Windows 7 DVD.

When attempting to install Windows 7, bootcamp will not read the Windows 7 disk (DVD disk purchased from Microsoft). Message tells me disk is blank. Inserted disk in a Windows PC, confirmed Windows 7 disk has all data on it.
MacBook (regular) mid 2008 running OSX 10.8.2, Bootcamp 5.0.

If you want to run MS Windows Simultaneously with OS X you can buy either Parallels or VMWare Fusion. Follow the installation instructions for the app you choose, both do the same thing. There are several advatages of using Parallels or Fusion including:
1. Running OS X & Windows simultaneously
2. You can run Windows XP, Vista and/or Windows 7
You can also use Boot Camp which comes with OS X to run Windows 7. The downside is you can only run one operating system at a time, either MS Windows or OS X. If you are a Windows gamer this is the best option for 3D gaming. In order to install follow the instructions in Boot Camp Assistant, you can find BCA in Applications - Utilities - Boot Camp Assistant and then follow the on-screen instructions.

CD/DVD Drive will Not read CD/DVDs

This desktop is only about 3 months old and so far has worked great!! But since last week for some reason the CD/DVD Drive will not read any disc. The tray will open but then nothing happens at all once a CD/DVD is in. Doesn't even sound like it is spinning. Any ideas?? Please help!! Thanks!!

Also it is running Windows 8 and is a Ideacentre K410. And the CD/DVD Drive it is showing I have installed is TSSTCorpDVD-RW SH-216BB Not sure if that has always been the drive or not.

Superdrive UJ-857E will not read Photo DVD

I have a Macbook Pro that i use for all my wirk. I create my own dvds as well as play regular shop dvds. Recently I have been editing photos from a HP Photo DVD without issues however, my Macbook pro will not read the same DVD. (it does nor even show up in finder as a disc) I do not now what to do at this point as I despretely need to be able to access my own photo dvds.
Any information, guidance or support will be most welcome. :-) Please find the specs listed below.
MacBook Pro
Model Identifier:          MacBookPro3,1
Processor Name:          Intel Core 2 Duo
Processor Speed:          2.2 GHz
Memory:          4 GB
Bus Speed:          800 MHz
Boot ROM Version:          MBP31.0070.B07
MATSHITA DVD-R   UJ-857E:
Firmware Revision:          ZA0E
Interconnect:          ATAPI
Burn Support:          Yes (Apple Shipping Drive)
Cache:          2048 KB
Reads DVD:          Yes
CD-Write:          -R, -RW
DVD-Write:          -R, -R DL, -RW, +R, +R DL, +RW
Write Strategies:          CD-TAO, CD-SAO, DVD-DAO
System Software Overview:
System Version:          Mac OS X 10.6.8 (10K549)
Kernel Version:          Darwin 10.8.0
Boot Volume:          Macintosh HD
Boot Mode:          Normal

Thanks much but I just unplugged the USB connector and put it back in and now it says YES! And I'm doing a test burn right now.
--Jeff

My disc drive on Mac Pro will not read installation dvds

I have been trying to install some software on my Mac Pro - OS 10.8. It will not read the installation DVD. It acts like it is blank. I thought this was a faulty dics drive so I purchased a new one from OWC and installed it and it is doing the same thing!
Please help I payed a lot for this software and cant use it.

persyna wrote:
...I thought this was a faulty dics drive so I purchased a new one from OWC and installed it and it is doing the same thing!...
Since you're on your second optical drive, does the new one (and, for that matter the old one) read any optical disk? If it does, then there might still be something wrong with the disk from that manufacturer. If no disk is readable, I'd doublecheck the cabling to the drive. I'd also call OWC tech support. I've dealt with them for many years and they've always been very helpful with any problems.
As far as the software goes, you bought a license as well as an installer disk. Does the manufacturer have a website from which you could download a trial version of the software that could be converted to a full, operating version with the license key that should have come in the box with the disk?

My imac running lion can not connect to a Windows PC on my network

My imac runing lion 10.7 can not connect to my Windows 7 pc on my network. When i select connect to server, I can see the windows computer but when i try to connect, i get the error message:
Connection failed. There was a problem connecting to the server. Ther server may not exist or is unavailable at this time. Check the server name or IP address, check your network connection and try again.
I entered smb:// computer name and I tried smb://IP address. Neither would connect.
I am able to connect to the imac from my Window PC and access files but not I can not connect my iMac to the Windows PC.
I am trying to connect the two computers so that I can use a printer that is attached to the Windows 7 pc.
When I first downl;oaded and installed Lion, I was able to connect to the Windows 7 pc and use the printer attached to it.
I have tried 5 or 6 different suggestions to no avail. Both computers are up to date and the printer drivers are up to date.
Please let me know if there is a solution.

Be sure to make the network Workgroup name on the Mac and Windows boxes the same.
On the Mac it is in System Preferences, Network Preferences, Advanced, WINS
On the Windows machine check in the Control Panel where you will also find the Computer name listed. I don't have my PC running right now, so I am not sure exactly where it is. Only assign a Workgroup, do not create a Domain.
You can also search in Windows for Workgroup.
I can link/network Lion to Win7 and vice versa without any problems.

12-month old iMac running Mavericks will not run Yosemite

I have an iMac 21.5", bought new in September 2013 and currently running Mavericks with no problem. The OS is on the internal Mac HDD while Time Machine is on an external HDD. Previous OS updates have installed OK.
Yosemite however will not run. After installation I can log in with no problem and all seems well -- the first time. All attempts to log in after the first produce the Apple logo and progress bar, but the bar advances only about one third of the way and hangs up, even when left for an hour or more. Nothing at all can move it -- all I can do is reboot by powering off/on. No login appears, just -- the logo and progress bar, which starts to run then stops as before.
If I reinstall Yosemite then I get one login as before, followed by the same failure -- I have now re-installed three times.
I have tried rolling back to earlier (pre-Mavericks) OS versions on Time Machine before installing Yosemite -- same result.
Right now I am back on the previous Mavericks. All is OK and I can live without Yosemite, but I am becoming concerned for future-proofing my apps. Newer versions, for Yosemite, are not going to run.
Any help would be appreciated please.
Best wishes to all.

Sadly it did not last. Yesterday it again froze on login and this time Safe Boot got me nowhere.
No doubt if I carry on experimenting I can sort it out, but I can longer justify the long breaks from my work. I have rolled back via Time Machine to my last Mavericks-based save, and there it stays until someone at Apple gets to grips with Yosemite. Or replaces it, which I expect won't be long . . .
It just is not good enough to tell the consumer that they must accept bugs with a new release, or that it's all their own, or their system's fault or that they should get help from a support forum -- any clerk should be able to sit down and just use it. If a machine was running OK with an existing OS, then it should seamlessly switch to the new without calling for a Masters in IT to figure it out. No ifs or buts. We pay a premium price for a Mac and deserve better than this from Apple.
From my standpoint, Yosemite is without doubt the worst beast of an OS -- from any source -- that it has ever been my misfortune to encounter. This is my third Mac over the years, and at this rate it's my last -- for all Microsoft's failings, I have never encountered anything like this with Windows.

Macbook with external monitor, running Lion, will not go to sleep

I have software version 10.7.5 and my macbook will not go to sleep on its own. It will go to sleep if I hit the power button and then tell it to go to sleep. I have turned off all sharing and I have set the preferences to sleep after 15 minutes. Yet, I hear the hard drive spinning all of the time. Any suggestions??

Have you reset the SMC? If not, try that.
Intel-based Macs: Resetting the System Management Controller (SMC)
If you've done that, and it didn't help, then launch the Terminal application by entering the first few letters of its name into a Spotlight search. Copy or drag -- do not type -- the line below into the Terminal window, then press return:
pmset -g
Post any lines of output that appear below what you entered -- the text, please, not a screenshot. Then repeat with the following line:
pmset -g assertion

IMac running Lion will not read windows 7 dvd

Similar Messages

Maybe you are looking for