IMac running on Mac OS 10.5.8

I have an iMac running Mac OS 10.5.8 and Windows XP (ServicePack 3) on Boot Camp 2.2. This configuration has worked for me perfectly for the past 2 years up until recently. From nowhere, the system is now refusing to boot to Mac OS but boots into Windows XP without any problem.
I have tried to repair the Boot Camp 2.2 in Windows XP via the repair/update option from the Boot Camp installation but its giving a fail message;
The installer has encountered an unexpected error installingthis package. The error code is 2727.
I have also tried to verify and repair the Macintosh HD partition using the Disk Utility but its giving me the following error message;
On verify disk
Invalid Sibling link
Volume check failed
ERROR: Filesystem verify or repair failed.
I could repartition and start all over again but there are some files and emails I need to retrieve from the Mac partition before I delete and repartition.
Is there any shareware software that I can install on theWindows XP partition and be able to access/retrieve my files in the Mac partition?

Please copy and paste your post into the Boot Camp forum.

Similar Messages

IMac running on Mac OS 10.5.8 & Windows XP wont boot from Mac OS

I have an iMac running Mac OS 10.5.8 and Windows XP (ServicePack 3) on Boot Camp 2.2. This configuration has worked for me perfectly for the past 2 years up until recently. From nowhere, the system is now refusing to boot to Mac OS but boots into Windows XP without any problem.
I have tried to repair the Boot Camp 2.2 in Windows XP via the repair/update option from the Boot Camp installation but its giving a fail message;
The installer has encountered an unexpected error installingthis package. The error code is 2727.
I have also tried to verify and repair the Macintosh HD partition using the Disk Utility but its giving me the following error message;
On verify disk
Invalid Sibling link
Volume check failed
ERROR: Filesystem verify or repair failed.
I could repartition and start all over again but there are some files and emails I need to retrieve from the Mac partition before I delete and repartition.
Is there any shareware software that I can install on theWindows XP partition and be able to access/retrieve my files in the Mac partition?

you can't repair Mac OS X from Windows.
What you need to do and realize is that Disk Utility is not good enogh or reliable enough and you need 3rd party disk repair utility.
Or just restore Mac HFS from backups.
You may want to install Mac OS on another external hard drive
Recover the files there - probably best to have two partitions.
you should have already created multiple backup sets: clone type and TimeMachine
Disk Warrior is $90 or there is TechTool Pro 6 for almost same
Cloning is easy enough either from Mac OS X DVD Disk Utility Restore or from another hard drive.
Cloning as a Backup Strategy
Carbon Copy Cloner
WinClone VMware HDD Upgrade
MPG - How To Guides - How to clone a volume
SuperDuper

After software update for Lexmark printer, cannot print document as a file is missing. My iMac runs with Snow Leopard.

I have a Lexmark 3500 - 4500 series printer connected to my iMac via USB (as my iMac won't do the printing wirelessly. My iMac runs with Mac OS X, Snow Leopard, Version 10.6.8.
A few days ago, there were several software updates that I have installed as there was mention that they were for Mac OS X Lion.
Today, I tried to print a document, and it failed. The error message was: "Missing component: /Library/Printers/Lexmark/Drivers/.Resources/3500-4500 Series Color 2.lut".
I have re-installed the software from Lexmark without success.
Has anyone had a similar issue who can advise me, please?
Thank you.
Philippe

Have you tried installing the Lexmark software from the Apple site:
Lexmark Printer Drivers v2.4 for Mac OS X v10.6
You are running 10.6 which the above link is for, maybe Lion (10.7) doesn't need everything that 10.6 does. Try re-installing using the above link.

My imac running slow ,rainbow wheel pops up

my imac running slow

See:
Mac Maintenance Quick Assist,
Mac OS X speed FAQ,
Speeding up Macs,
How to Speed up Macs,
Macintosh OS X Routine Maintenance,
Mac troubleshooting: What to do when your computer is too slow,
Essential Mac Maintenance: Get set up,
Essential Mac Maintenance: Rev up your routines,
Maintaining OS X,
Five Mac maintenance myths and
Myths of required versus not required maintenance for Mac OS X for information.
For the SBBODs, see http://www.thexlab.com/faqs/sbbod.html

Is it possible to screen share an old iMac running 10.4 with a new Mac Mini running Yosemite

Is it possible to screen share an old iMac running 10.4 with a new Mac Mini running Yosemite. I am trying to bring the old iMac screen up on the Yosemite system

Hello! Not out of the box: OS X Mountain Lion: About screen sharing You'll have to look for third-party options like Teamviewer

I have a new iMac running iTunes 10.4 in OS 10.6.8, and a new Mac Air running iTunes 10.4 in Lion. I was able to transfer all my music etc. from the iMac onto the Air, but cannot figure out how to get the Playlists from the iMac to the Air. iTunes Help

I have a new iMac running iTunes 10.4 in OS 10.6.8, and a new Mac Air running iTunes 10.4 in Lion. I was able to transfer all my music etc. from the iMac onto the Air, but cannot figure out how to get the Playlists from the iMac to the Air. iTunes Help says File >Library >Export playlist and choose XML, or to save a copy of all your playlists, File > Library > Export Library, "the Exported info is saved in XML format." Then it says, "to import an iTunes playlist, File > Library > Import Playlist". Now I am assuming I do that import part on the Air, but when I try it doesn't recognize anything that can be imported - what am I missing??? Aside from a clue...

Thanks, Jim, for taking the time, but the reply is unfortunately vague in the exact area of my confusion! "you need to copy that file to your new computer..." Well, the Import/Export instructions make it seem as if the two computers should be able to communicate this file thru wifi, but that's the linkage I can't seem tocreate with Import/Export. Should I instead email a copy to myself (thats what applecare suggested)? Copy it to and from a thumb drive? But then place the file where? And the article was helpful, but should I be trying to move the Library file or the Library.xml file (as iTunes Help suggests)? Sorry to be so clueless about it...I suppose I buy Apple in the hopes of not having to think about this stuff, which approach seems not to be serving me well. Thanks again for your time!

2006 iMac running 10.4 OS. I copied files to ext. drive. Put in 10.6 disc and did a clean install (format) of 10.6. Copied data from ext. drive back to Mac. I didn't get all the files. CAN I REVERT BACK TO THE 10.4 OS SO I CAN COPY MY DATA PROPERLY?

2006 iMac running 10.4 OS. I copied files to ext. drive. Put in 10.6 disc and did a clean install (format) of 10.6. Copied data from ext. drive back to Mac. I didn't get all the files. CAN I REVERT BACK TO THE 10.4 OS SO I CAN COPY MY DATA PROPERLY?

How did you copy files to the external drive, and what files did you copy? Did you drag and drop in the Finder? Use a clone utility? What files did not successfully copy?
If you reformatted the drive as part of your install, then you won't be able to recover any files from the drive. Reverting back to (reinstalling) 10.4 will not help you.
Do you have a complete-drive backup of your old system?
Matt

I have an iMac running Lion and W7 with boot camp . It has been operating flawlessly until I went to reboot into Mac tonight. Screen went black, and system is unresponsive. I've tried force quitting and turning power off. Hard drive starts but that's it..

I have a 5 month old iMac running Lion and W7 with the latest version of boot camp . It has been operating flawlessly until I went to reboot into Mac tonight. Screen went black, and system is unresponsive. I've tried force quitting and turning power off. Hard drive starts, there's a small amount of drive activity and that's it.

Hi Jane, your info may still be there, look in the Users folder at root of the drive, how many users are there there?
It sounds like this may have happened...
Return to default desktop, apparent "loss" of home directory, (it can happen spontaneously too)...
http://docs.info.apple.com/article.html?artnum=107854

How do I retrieve data from time machine from an old mac (which was running 10.5) on my new iMac running mavericks?

How do I retrieve data from time machine from an old mac (which was running 10.5) on my new iMac running mavericks?

See B 5/6.
Time Machine Troubleshooting

Problem: slow connection. I have an iMac (2007) running on Mac OS X 10.6.8. I just had my internet speed increased from 1 to 3 Mbps but my connection slowed down considerably. Do I have to change any setting?

Problem: slow connection. I have an iMac (2007) running on Mac OS X 10.6.8. I just had my internet speed increased from 1 to 3 Mbps but my connection slowed down considerably. Do I have to change any setting on the computer, and how?

One possibility is that you may need to "Upgrade" your Cable /DSL Modem if you have an older unit. ISP's that provide your Internet service in recent years have been switching over from DOCSIS 2.1 version Modems to DOCSIS 3.0 version Modems, which handle the new higher data streaming speeds the ISP's are offering. I would suggest you call your ISP's Technical Support and inquire about this possibility.

Can I upgrade my IMac Running Mac OS X 10.6.8 to Mountain Lion?

I'm curioous if anyone can tell me if I can upgrade my IMac running Snow Leopard can be upgraded and have the capability to run the new, more feature rich Lion software?
I'm a recent convert having just migrated from PC platform to mac and honestly I need to spend some serious quality time on my learning curve. I was browsing through the Apple Store when I saw an upgrate opportunity to Lion. Once I read the list of improvements, I was sold -- I really want Lion even if it costs an addional $300. My fear, however, is that I'll purchase the Lion software only to find out that it's incompatible with my older Mac running Snow Leopard.
Mac OS X 10.6.8 (10K549)

Be sure to make a Backup of your Current System Before Upgrading...
See Here to check that your Mac can run ML...
Upgrade to Mountain Lion
Check here for compatibility of 3rd party Software you may be using...
http://roaringapps.com/apps:table
You should also consider more RAM... Get the Maximum you can for your Mac...
It is important to get the Correct and Matching RAM
See Here > OWC RAM > http://www.macsales.com

I have a fairly new 27" iMac running Mac OS10.6.7, I'm trying to print to an Epson Stylus Pro 3800 via an in-house wireless network. I have installed the latest Epson drivers.

I have a fairly new iMac running OS 10.6.7. Im trying to print to an Epson Stylus Pro 3800 via an in-house wireless internet. I have installed the latest drivers. It was working a couple of months ago. My wife is on the same network using a MacBook Pro and the same OS and is having no problem.

I have been using an Epson 3800 with my I Mac for four years and up untill I upgraded to OSX Lion the only problem I had was colour issues associated with some ICC profiles. After upgrading to Lion and downloading the latest OSX update (10th May) I could not print.
One of the problms was that the print settings continuously defaulted to:
Page Setup: Sheet Feeder
Media Type: Ultra Premium Photo Paper Luster
I would change the settings to what I wanted, I saved them selected Print. My printer promptly started changing from Matte ink (what I had set my print setting s for) to Photo Black.
After trying all i could to correct this. I finally gave up and rang the Epson Helpline. After 3 telephone calls over a day and a half during which I was talked through the procedure you described, the problems were still not resolved.
My contact on the Epson Helpline then tried to simulate the problem on his MAC. He discovered that he had the same problem the print settings would not save, albeit on a Epson 3880 driver. He then advised me that the problem was not with thw Epson Drivers it was a MAC/Apple problem.
I then rang the Apple Helpline (at £1.35 a minute) described the problem and was eventually put through to a supervisor. Who asked me to send her a set of screen shots describing the problem, This I have done, I have received an acknowledgement of receipt and have been advised that I should get a response within two working days.
I am waiting hopefully.
I have tried to print both via CS5 and Aperture the problem is the same in both instances.

Using 2006 iMac running Mac OS 10.6.8. My iTunes App (11.3.1) will not launch. Upgraded to iTunes (11.4) but problem persists. Need help.

Using 2006 iMac running Mac OS 10.6.8.
My iTunes App (11.3.1) will not launch.
Upgraded to iTunes (11.4) but problem persists.
Need help.

I have no answers for ya, but I do have the same problem, so we are not alone in this.
My iTunes stopped working after I did a couple of software updates that got my iTunes up to v. 11.4. Since that update, I can't get iTunes to open at all, neither from my dock nor from the Applications menu.
I'm wondering: Perhaps these latest iTunes updates are simply too advanced for my 10.6.8 operating system? If that's the case, how can I backtrack to an earlier version of iTunes that is compatible with my computer OS?
Any thoughts?

Is it possible to connect an older Power Mac (running OS 10.5.8) to an iMac running 10.9.5. I want to share the monitor, keyboard and mouse and switch between the two computers.

Is it possible to connect an older Power Mac (running OS 10.5.8) to an iMac running 10.9.5. I want to share the monitor, keyboard and mouse and switch between the two computers.

as far as I know then the target display mode is not an option with such an old mac

HT201364 My imac running OS 10.6.8, and want to install software that needs OS10.7. The latest upgrade Maverick requires a MAC dated 2007 or later. Where is the date... It is NOT in "About this Mac". Older upgrade better? How to proceed?

My imac running OS 10.6.8, and want to install Garmin software that needs OS10.7.
The latest upgrade Maverick requires a MAC dated 2007 or later. Where is the date... It is NOT in "About this Mac".
I feel an older upgrade than Maverick might be better for my machine?
Is it possible to upgrade to ie, 10,7? or another recommended upgrade.
How to proceed?

Upgrading from Snow Leopard to Lion or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99.
If you sign into the App Store and try to purchase Mountain Lion but the App Store says your computer is not compatible then you may still be able to upgrade to Lion per the following information.
A. Upgrading to Mountain Lion or Mavericks
To upgrade to Mountain Lion or Mavericks you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion or Mavericks (Free) from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion — System Requirements
     OS X Mavericks- System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
             Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
         7. Xserve (Early 2009) — Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
         See App Compatibility Table — RoaringApps.
B. Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.

IMac running on Mac OS 10.5.8

Similar Messages

Maybe you are looking for