IMac Running OSX 10.6.8: hard drive replaced: old PSE3 (don't like/want any of the more modern versions) reloaded fine until serial number entered, then told it couldn't activate or some such. Adobe "help" sent me here. Please help.

iMac Running OSX 10.6.8: hard drive replaced: old PSE3 (don't like/want any of the more modern versions) reloaded fine until serial number entered, then told it couldn't activate or some such, I think because it was a single computer sale and now the new hard drive registers as a new/second computer. The program will run just fine on this computer if adobe will let me install it and activate it. Can this be done, or must I just go buy an old one on eBay, and if so will that also fail to activate? (Some one here last night wanted me to get on Skype for help, as if an old crustacean like me has Skype. No, it'll have to be done right here in print.) Can anyone help?

Unfortunately, you're in the wrong forum. This is not the Elements forum.
Here's the link to the forum you want:
https://forums.adobe.com/community/photoshop_elements/content

Similar Messages

Hi there, I have lost imovie on my iMac after taking it to the shop to get the hard drive replaced. Unfortunately I do not have any of the start up discs. How do I get imovie back on my computer?

Hi there, I have lost imovie on my iMac after taking it to the shop to get the hard drive replaced. Unfortunately I do not have any of the start up discs. How do I get imovie back on my computer?

See this thread:
https://discussions.apple.com/message/20635110#20635110

Just had my hard drive replaced but now dont have iPhoto garage band ect the stuff i had on the computer when i bought it.

Just had my hard drive replaced but now dont have iPhoto garage band ect the stuff i had on the computer when i bought it.

Reinstall them from your original install disks or your backup.

I have an air with 64Gb hard drive and 2Gb RAM and would like to upgrade both the HD and RAM. WHat should I buy?

I have an air with 64Gb hard drive and 2Gb RAM and would like to upgrade both the HD and RAM. WHat should I buy?

TWTexas wrote:
WHat should I buy?
compensate or purchase a new Air
Recommend a SUPERSLIM portable 1TB HD
RAM cant be upgraded, as The Fox-man has already said.

No sound on iMac Intel 24'' EMC 2267 after hard drive replacement

I replaced my hard drive on my iMac Intel 24'' EMC 2267, due to numerous bad blocks, by following all the instructions on iFixit.com. I did not experience any problems.
I then installed all my files from a Time Machine backup. There were no problems with the restoration of my files. It seems that my new hard drive works beautifully.
However, one serious problem I have is that now there is no sound on my iMac. There is no startup chime, and there are no other sounds. When clicking on Sound in System preferences, it says that there are "no output devices found".
When opening system profiler, in the Audio (built-in) tab it says "Audio ID: 0"
I re-opeend my iMac to make sure that all cables were connected properly, and I did not manage to spot any problems.
I tried to reset PRAM and EMC but these did not solve the problem. I am working under MacOS X 10.6.8
Can someone help please? Any information provided will be most appreciated. Thanks in advance for your support.
Regards - Gina

I think when you replaced your hard drive you bumped into the daughter board and that is for the sound and the wireless, You need to get another daughterboard or contact the Apple Store if your Mac is stilll under warranty.

After having my hard drive replaced, I tried restoring files from time machine. The restore completed but I don't know where the files were restored to. I can see they are taking up space on my hard drive but I can't get at them.

My hard drive failed and so was replaced, luckily everything was backed up on time machine.
I tried to do a full restore, and it went through the process but I couldn't see my files anywhere on the HD. I tried again and same thing. Eventually I used Migration Assistant and this worked fine.
However my hard drive is now full - all my previous restores went somewhere but I can't get at them.
Can anyone please help, I need to delete them from my system.
Thanks

Is the HDD in the 2009 15" MBP dead? (The original source of your data) If not, you might want ot take it out and put it in an enclosure.
You might try spotlight on know files to see if that gives you any clues where your data is located.
You might down load from the Internet OmniDiskSweeper (free) and open it. It should show you all of the files you have on your MBP and enable to locate them.
Ciao.

I'm trying to boot my new iMac running Mavericks from an external hard drive with Snow leopard but it fails with a window telling me to power down manually. It works with my old iMac.

I have made a bootable copy of OS 10.6.8 onto an external G-drive from my 2007 24" iMac with success. I can't boot up my my new 2013 imac that has Mavericks installed. Any suggestions?

trey4 wrote:
I have made a bootable copy of OS 10.6.8 onto an external G-drive from my 2007 24" iMac with success. I can't boot up my my new 2013 imac that has Mavericks installed. Any suggestions?
Why do you want to run Snow Leopard on your new 2013 iMac with Mavericks?

What is the maximum hard drive replacement I can use on my PowerBook g4 867 ghz?

What is the maximum hard drive replacement I can use on my PowerBook g4 867 ghz?

Sorry we are late. This forum is getting less traffic as people upgrade and responses sometime take longer. Everyone here volunteers their time, and I for one was unavailable much of yesterday.
The limiting factor on max drive size is that your PowerBook uses the older PATA drive interface, and the largest PATA 2.5-inch drives available today are about 320 GB.
What I'm reserching is the ATA bus controller in your PowerBook. Some older Macs cannot recognize more than 128GB of PATA hard drive space. However, this archived discussion from 2008:
https://discussions.apple.com/thread/1413918?start=0&tstart=0
suggests that people are running PowerBooks older than yours and not suffering the 128GB limit.
At this point, I need help with what appears to be a descrepancy between the text of your post and the PowerBook in your profile. A "PowerBook6,2" model identifier returns to the "PowerBook G4 (12-inch DVI)" marketing name with a 1.0Ghz processor; the 12-inch PBG4 with a 867mHz processor shows a model identifier of PowerBook6.1. They show the same hard drive interface but the later on appears to be a sure bet for large hard drive support,

I download itunes it says its successfully installed. then when i try to open it it says "apple application support not found" PLEASE HELP!!

I download itunes it says its successfully installed but then when i try to open it is says "Apple Application Support not found"

Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, does iTunes launch properly now?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

Replaced hard drive on my iMac running OSX 10.9.3 now CS4 Master Collection Not working. Receiving error message 150:30 - help.

I have had to replace the hard drive on my iMac running OSX 10.9.3 and reloaded my CS4 Master Collection from Time Machine. I am receiving error message 150:30 saying License has stopped working what should I do?

Unfortunately, you can't install Adobe applications by copying them from a backup, or using the Migration Assistant on a Mac. There are too many support files scattered throughout your drive which aren't moved to the correct location.
First, you'll have to use Adobe's Cleaner Tool to remove all of the stuff you copied:
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Then reinstall CS4 Master Collection from your original discs, or a backup of the downloaded files. If you don't have either, you can download Creative Suite from this link:
Other downloads

I have an IMAC and I'm running OSX 10.9.2. I'd like to store my Aperture /IMovie Libraries to an external hard drive. In addition, I'd like to partition the external hard drive so that Time Machine can use it to both back up my IMac and the externa

I have an IMAC and I'm running OSX 10.9.2. I'd like to store my Aperture /IMovie Libraries on an external hard drive. In addition, I'd like to partition the external hard drive so that Time Machine can use it to both back up my IMac and the external library drives. Is this possible? Can I set up a RAID 5 format for redundancy?

I'd like to store my Aperture /IMovie Libraries on an external hard drive.
That is fine and recommended.. use the fastest disk you can afford.. ie Thunderbolt>USB3>FW800>USB2.
In addition, I'd like to partition the external hard drive so that Time Machine can use it to both back up my IMac and the external library drives.
Let me be clear.. you want to partition the one disk.. use it for TM and move your files to the external disk.. and then backup to the same disk.. You can do it.. but that is not a backup.. that is an experiment in how long you can get away with running files and backups on the same disk before you lose everything.. like Russian Roulette.. pull the trigger enough times and laws of probability will do you in.
You must have backups on a different disk .. otherwise it is pointless.
Can I set up a RAID 5 format for redundancy?
No.. you can buy special USB and Thunderbolt external drives that support RAID..
BUT that is still not a backup.. let me show why.. you make a silly move and corrupt your file in aperture.. it is not that rare.
Raid will corrupt all copies of the files.. it is replicated across all disks.
Delete a photo it is deleted across all disks.. you have no recovery.
Alway, always consider RAID system one disk.. backup onto another disk.. and if the photos or movies are at all important to you.. ie your family .. make another copy and store in a relatives house.. There is no such thing as too much redundancy.

Can an intel iMac run OSX Tiger from an external hard drive?

Hi can anyone please tell me if it is possible to run OSX Tiger from an external hard drive on an Intel iMac running OSX 10.5 Leopard or later?
Or is it possible to partition the intel iMac's hard drive and add Tiger?
At the moment I am running Tiger on a partitioned hard drive shared with OSX Leopard and wish to upgrade to an intel Mac. I need tiger to run some software not compatible with newer Macs and also to access OS9 Classic. Thanx for your help.

IF you upgraded from Panther as you know you do not have an Intel based iMac. I beleive the limit of your upgrades on your current machine is going to be Leopard. The system requirements for Snow Leopard are:
General requirements
Mac computer with an Intel processor
1GB of memory
5GB of available disk space
DVD drive for installation
Some features require a compatible Internet service provider; fees may apply
This is straight from Apple so yes if you want to go beyond Leopard then you must purchase a new machine. My suggestion would be to begin replacing your legacy apps, you are extremely far behind and the longer you wait the more painful it will be to get current.
Good luck.

I purchased a IMac in Feb later I added a Seagate ext. hard drive. On April 29 I received an errors that the ext. Drive may be a read only and not backing up files. I'm unable to check disk permission or correct errors. Help would be appreciated.

I purchased a IMac in Feb later I added a Seagate ext. hard drive. On April 29 I received an errors that the ext. Drive may be a read only and not backing up files. I'm unable to check disk permission or correct errors. Help would be appreciated.

Click on the hard drive on the desktop, then File > Get Info. What does it say about permissions? If this is just a data drive you may want to consider "ignore ownership on this volume".
Otherwise I can only say I have not been reading good things about Seagate drives recently. I have some of their rock-solid ones from about 10 years ago (still running well), but now...?

Mac OSX 10.6.8 running Photoshop CS5. My hard drive went belly up. Installed a new one and then tried to install Photoshop from my backup. I get an error message 6 telling me to uninstall Photoshop and then reinstall from the original software. But I boug

Mac OSX 10.6.8 running Photoshop CS5. My hard drive went belly up. Installed a new one and then tried to install Photoshop from my backup. I get an error message 6 telling me to uninstall Photoshop and then reinstall from the original software. But I bought from Adobe online. How do I go about this?

Yes, the Old Master file has a folder for each year where I find all photos from that specific year. I am attaching a screen shot of the file.
In the meantime i have managed to download all photos (it did not download any video files though in mpg, avi, 3gp, m4v,mp4 and mov format) to a new iphoto library. Unfortunately the photos are quite mixed and often doubled up. I ma considering to purchase iphoto library which checks all duplicates in iphoto. this will save me a lot of time. What do you think?

Error message when I try to print: unsupported document-format"application/vnd.cups-command. I recently had my hard drive replaced in my early 2010 21" iMac. Can anyone help?

Error message when I try to print: unsupported document-format"application/vnd.cups-command". I recently had my hard drive replaced in my early 2010 21" iMac. Anyone know anything about this? Thanks in advance.

What system are you running? Have you tried going to the Canon website to download and install the latest drivers for that model?
Are you running Time Machine?

IMac Running OSX 10.6.8: hard drive replaced: old PSE3 (don't like/want any of the more modern versions) reloaded fine until serial number entered, then told it couldn't activate or some such. Adobe "help" sent me here. Please help.

Similar Messages

Maybe you are looking for