IMac says start up disk is full. now what?

iMac says start up disk is full. now what?

Here are two links that may help.
Where did my Disk Space go?
http://macmost.com/what-to-do-when-your-hard-drive-is-full.html

Similar Messages

Mac Air says start up disk is full

MMac air says start up disk is full & now won't turn on. What can I do?

Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.

What does hd macintosh full mean please help I am also getting an error message saying start up disk is full i need to free up some space how do i do this please?

what does hd macintosh full mean please help I am also getting an error message saying start up disk is full i need to free up some space how do i do this please?

Also, you may find this link of intereset and value...
http://macmost.com/what-to-do-when-your-hard-drive-is-full.html

What does it mean when it says my start up disk is full? What do I need to do to correct this?

What does it mean when it says my start up disk is full?
What do I need to do to reduce or empty it?

Freeing Up Space on The Hard Drive
1. See Lion/Mountain Lion/Mavericks' Storage Display.
2. You can remove data from your Home folder except for the /Home/Library/ folder.
3. Visit The XLab FAQs and read the FAQ on freeing up space on your hard drive.
4. Also see Freeing space on your Mac OS X startup disk.
5. See Where did my Disk Space go?.
6. See The Storage Display.
You must Empty the Trash in order to recover the space they occupied on the hard drive.
You should consider replacing the drive with a larger one. Check out OWC for drives, tutorials, and toolkits.
Try using OmniDiskSweeper 1.8 or GrandPerspective to search your drive for large files and where they are located.

It says my startup disk is full. What can I do to fix it?

It says my startup disk is full. What should I do to fix it?

Google search on these forums for "start up disk is full". There are a lot of similar discussions.
Related articles:
The X Lab: Freeing space on your Mac OS X startup disk
Where did my Disk Space go?
Use any of the following to analyze the disk usage:
Disk Inventory
GrandPerspective
OmniDiskSweeper
WhatSize

I keep getting a message that my start up disk is full. What do I need to do?

I keep getting a message that my start up disk is full. What do I need to do?

Freeing Up Space on The Hard Drive
1. See Lion/Mountain Lion/Mavericks' Storage Display.
2. You can remove data from your Home folder except for the /Home/Library/ folder.
3. Visit The XLab FAQs and read the FAQ on freeing up space on your hard drive.
4. Also see Freeing space on your Mac OS X startup disk.
5. See Where did my Disk Space go?.
6. See The Storage Display.
You must Empty the Trash in order to recover the space they occupied on the hard drive.
You should consider replacing the drive with a larger one. Check out OWC for drives, tutorials, and toolkits.
Try using OmniDiskSweeper 1.8 or GrandPerspective to search your drive for large files and where they are located.

My macbook air won't load. Says start up disk is full but I can't get the home page to open

My Macbook air won't load. Says the start up disk is full but won't open the home page so I can do anything about it

Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.

"start up disk is full" now gray screen

Help!
I was getting the "start up disk is full" error message. I deleted and transfered files, and had stopped receiving the warning. Then my Iphoto gave an error message that it needed to "repair". When I "repair"ed iphoto - all of my photos that I had transfered or deleted came back.I photo started to not run proberly, and then went to gray screen before I could delete more and empty the trash. Now all I have is a gray screen - only my password screen comes on and then gray screen - no function at all on the laptop at all. Anyone have any ideas?

Repair Disk
Steps 1 through 7
http://support.apple.com/kb/PH5836?viewlocale=en_US

How to fix macbook air that is frozen after log in, it says start up disk is full.

Hi! Im getting an error message on my macbook air that the start up disk is full, so i trashed some files and this morning when i turn it on it still says the same error message, and just freezes upon log in.. it wont let me do anything, it only display blank screen. plaese help. thanks.

Hi Laiwin,
What did you delete? Did you by any chance delete anything out of the /Library or /System folder off the root level of the drive? Probably the best option is startup the computer and then immediately hit Command + V. This will boot into Verbos mode. When does the boot process stop? What does it say? This will help tell us where it is failing in the boot process.

IMac 24 start up disk is full

I am getting an error that my start up disk is full and I need to delete some files. I may be an idiot but where do I find this disk/place on here or is it just I need to move some photos/possibly videos to an external drive to free up space overall?

just I need to move some photos/possibly videos to an external drive to free up space overall?
Depends on how much space you need to free up. Rule of thumb, never allow the free space to fall below 15% of the capacity of the hard drive.
Help here.
http://www.thexlab.com/faqs/freeingspace.html
To view free space go to Applications / Utilities. Launch Disk Utility. Select the startup disk on the left then click the FirstAid tab.
Capacity and Available at the bottom of the window.
You can also right or control click the MacintoshHD icon on your Desktop then click Get Info. Capacity & Available info from the Get Info panel.

I can't log in after I got a start up disk is full message, what do I do? ?

I am having a problem logging in after a startup disk is full message. Is there anything I can do to get it to log in again? I have been deleting large files but I guess it wasn't enough to take care of the problem.

It is very difficult to offer troubleshooting suggestions when the "os version" you are using is unknown as each os has their own troubleshooting solutions.

Start up disk is full in my iMac

my imac is 500GB and it says start up disk is full, so i deleted most of unwanted things in my imac. when i press Command + I on my home folder it says i used 170GB but when i press Command + I on the MAC HD icon in desktop it says 0 bytes free! My trash is empty. i'm using MAC OS 10.8. can some one help me

Be sure you Empty the Trash after you put files into the Trash.
It's probable that your drive's directory is corrupt as a result of running out of disk space. You will need to repair the hard drive after you have freed up enough space.
Repair the Hard Drive
Boot from your Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

How do i solve the 'start up disk almost full' problem?

when i turn on my macbook air, it comes up with a warning message that says 'start up disk almost full' and that i need to clear some space, how do i do this?

For information about the Other category in the Storage display, see this support article.
Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
iPhoto ▹ Empty Trash
Do the same in other applications, such as Aperture, that have an internal Trash feature. Then reboot. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of the data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown asBackups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Reboot and it should go away.
See this support article for some simple ways to free up storage space.
You can more effectively use a tool such as OmniDiskSweeper (ODS) to explore the volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
If you have more than one user account, make sure you're logged in as an administrator. The administrator account is the one that was created automatically when you first set up the computer.
Install ODS in the Applications folder as usual. Quit it if it's running.
Triple-click anywhere in the line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The application window will open, eventually showing all files in all folders, sorted by size with the largest at the top. It may take a few minutes for ODS to finish scanning.
I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with ODS, quit it and also quit Terminal.

HT1310 start up disk almost full

get error message - start up disk almost full? What do I do?

Freeing Up Space on The Hard Drive
1. See Lion's Storage Display.
2. You can remove data from your Home folder except for the /Home/Library/ folder.
3. Visit The XLab FAQs and read the FAQ on freeing up space on your hard drive.
4. Also see Freeing space on your Mac OS X startup disk.
5. See Where did my Disk Space go?.
6. See The Storage Display.
You must Empty the Trash in order to recover the space they occupied on the hard drive.
You should consider replacing the drive with a larger one. Check out OWC for drives, tutorials, and toolkits.

For a while now my computer has been saying " Start up disk is nearly full", however I don't have a lot of stuff saved on the computer I moved a lot to a flash drive, and all the other stuff are songs and recently saved essays for school. Help.

For a while now my computer has been saying " Start up disk is nearly full", however I don't have a lot of stuff saved on the computer I moved a lot to a flash drive, and all the other stuff are songs and recently saved essays for school. I have and frequently empty my trash can. I have researched this before and i see a lot of things that say get a external hard drive, but before I go and purchase one I want to make sure there is no other, simpler way, to solve this problem. Help Please.

You need an external drive so you can free up disk space. Right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. Make sure you have a minimum of 15% free disk space.
Freeing space on your Mac OS X startup disk

IMac says start up disk is full. now what?

Similar Messages

Maybe you are looking for