Imac screen condensation
the imac stood unused in an unheated room for some time.now there´s a layer of grey,what seems to be condensation under the screen,covering half of it.do i have to be worried?
the shade was not visible when i turned the imac on,and seems to decline (maybe).
does anyone have experience with this appearance,and what should i do?
I was surprised that it was there, and I was relieved it is gone.
Under bright light reflection, take a look again. The 'wet' mark is gone with no water visible under the glass, but you can see the cloudy mark from the water marks.... So it is not totally as before it went into condensation.
I used a window light to see this, you can use a bright torch also may be.
Similar Messages
-
24" iMac screen mist behind glass
For a couple of months now my 24" iMac screen keep misting up behind the glass around 30 mins after booting - anyone know a resolution for this? Will Apple replace the screen even though i've had it around 4/5 years now?
scottycross wrote:
For a couple of months now my 24" iMac screen keep misting up behind the glass around 30 mins after booting - anyone know a resolution for this?
It is common to get condensation between the display and front glass panel, if it is humidity and cool in your office or home.
A few things that you might try, are
1. Reduce the level humidity with a dehumidifier.
2. Leave the iMac on longer until the condensation dissipates.
3. Remove the front panel yourself and clean between the display and glass.
Will Apple replace the screen even though i've had it around 4/5 years now?
No, but if you contact your local Apple Store or AASP you can schedule an appointment to have it dried and cleaned. -
Hi,
I recently bought an iMac (24" display), and I noticed that one small portion in the lower right hand corner of the display is hazy, much more so than the rest of the display, which is fine. Anything I place in the area is fuzzy, so its not related to the content being displayed. Does anyone know of a fix for this, or would I have to take it in to the Apple store? Thanks in advance,
Rishi BediI noticed after being away for a couple of days that my 24" imac screen has a cloud in the lower right corner. Got to say it looks like the weather around here as it has been cloudy every day for the last month. I just took a hair dryer and blew it on to the screen and it cleared it up slicker then dog poop. it does appear to be condensation due to weather conditions. just hope it does no damage to the other stuff deep inside the computer. I think I will give apple a call on this to see what they say.
-
How do I get rid of hazy spot on my IMac screen?
How do I get rid of hazy spot on my IMac screen?
Does it look like condensation between the glass panel or more like a dark smudge (aka burn mark) on the display?
see > iMac Screen Cleaning - YouTube
Of course if your iMac is in warranty or you are not into DIY, then contact your Loacl Apple Store or AASP and have them clean and/or service the iMac.
see > Apple - Support - iMac - Service FAQ -
Hello,
I just noticed that my 27' iMac screen has some dirts from inside the glass. looks like humidity. It is increasing day after day.
Hardware less than one year and still under warranty.
Any idea what to do?
Thank you
KarimMy iMac also had this issue. I brought it to a repair shop and they were able to seal it for me. I think it only cost around $75. Haven't had the issue since I had it treated. They said it was condensation and that it happened quite a bit with various iMacs.
-
Hi
My iMac screen has become hazy in the middle of the viewing area. It is not the pixels, but looks more like it is on the outside.
I tried cleaning the exterior, but that doesn't help.
I don't think it is condensation inside the screen, but it looks a lot like it.
Any ideas?Hello, sounds loke the common dust problem...
https://discussions.apple.com/search.jspa?resultTypes=&dateRange=all&peopleEnabl ed=true&q=smudges&containerType=&container=&containerName=&username=BDAqua&rankB y=date&numResults=15 -
My ipad recognizes my home network but will not connect to the internet. When I click on AirPort/preferences at the top of the imac screen it says..."AirPort has a self-assigned ip address and may not connect to the internet". If this is the root of the problem,how can I change ip address?
Ipad will connect no problem to other networks.First thing you need I think is to get your iMac connected to the Internet.
Shut down your iMac and you iPad. Then power off your router. Wait 30 seconds and power up the router.
After the router indicates that it is connected to the Internet then start up your iMac and see if it connects. If the iMac connects to the Internet then your iPad should too.
If this power up sequence doesn't work you'll have to dig into the router setup to make sure it is working properly. -
How do i connect my iMac Screen to Apple TV?
I have read i can connect my iMac Screen to my Apple TV via Airplay.
How do i do that?
I have Mac OS X Version 10.7.4
I have the OS X Lion ready to download and install, but can't back up my computer (no where to back it up to :/)Welcome to the Apple Community.
OSX 10.7.4 is Lion
Lion doesn't support AirPlay of the Macs screen to the Apple TV. -
When I press the Command + F2, the iMac screen becomes a secondary for the MacBook Pro, and the Thunderbolt Display becomes the primary screen for the iMac. I was hoping that both screens would become secondaries for the MacBook Pro. Does anyone know how I should proceed? I have tried to connect the Thunderbolt display directly to the MacBook Pro, and the iMac to the Thunderbolt Display via the separate Thunderbolt cable, but there was no difference. And since the MacBook Pro only has the one Thunderbolt port, I'm not sure how to proceed.
Yes, eww, the language definitely states two thunderbolt displays, but I can understand the confusion and was siding with how they could make the mistake to think it would work like they want it to. My appologies for not being clear on that point, but I think you make it clear that the language in the ad says nothing about an imac.
Having said that all the language about TB would suggest that this would be possible. http://www.apple.com/thunderbolt/
High performance on display.
Thunderbolt I/O technology provides native support for the Apple Thunderbolt Display and Mini DisplayPort displays. It also supports DisplayPort, DVI, HDMI, and VGA displays through the use of existing adapters. So you can connect your Apple LED Cinema Display or other display, along with multiple high-speed devices, all from a single port. -
How can i see my Imac screen on my macbook pro wireless
How can i see my imac screen on my macbook pro wireless
When posting in Apple Communties/Forums/Message Boards.......It would help us to know which Mac model you have, which OS & version you're using, how much RAM, etc. You can have this info displayed on the bottom of every post by completing your system profile and filling in the information asked for.
CLICKY CLICK-----> Help us to help you on these forums
***This will help in providing you with the proper and/or correct solutions.*** -
Any external monitors as good as imac screen for text?
hi all.
this is my first mac. it's a new 21.5inch imac with a 2.7ghz i5 proc running OS X 10.7.3 and 12 Gigs of RAM (8 Gigs from crucial for $50, who can resist?)
i've got it hooked up to an external samsung syncmaster B2330 running in 1920x1080, which is this monitor's native resolution. works fine. it's hooked up via the dvi port on the screen via the mini-displayport to dvi adapter for the mac. i switch this monitor to the vga port when i want to use it as my pc monitor also running at 1920x1080. there is a source button on the monitor. very convenient.
the issue is that they text on this screen when coming from the mac is not as clear was when coming from the pc despite the fact that the vga port provides much less bandwidth than the dvi port the mac uses. i've read that the mac and the pc display text on screen using different methods. my pc uses an nvidia display graphics card. i believe mac use ati based hardware.
there appears to be much more interpolation when displaying text from the mac. perhaps this is a text size issue i'm not sure. either way i read a lot on this monitor and need it to be as good as possible for that purpose.
so the question is, does anyone have experience with an external monitor that is as good as the imac screen for text display. i can't use the thuderbolt display or a cinema display since they don't switch to different ports allowing my to use a single external monitor for two machines. i'm willing to spend up if there is a reason to do so. i'm on these computers a lot. i work from home with some regularity and my job is all about reading.
any help is appreciated.
best, cI have an dell 24" lcd as 2ed monitor and text look as clear as the imacs screen
but it having a t-nfilm lcd panel vs. the imacs ips panel the colour and contast look worse
but text look as clear
and it look the same when I boot up in win7 using bootcamp -
External Monitor with iTunes - iMac screen goes black
I have an iMac with iTunes 7.7/Leopard and an external VGA monitor (I use the standard Apple mini-DVI to VGA converter) then I use the external monitor to watch video from my iTunes library.
All works well - I have my desktop spread over both monitors, I fire up a movie from iTunes, move the video window across to the external monitor and everything is good - I can watch the video on the external monitor whilst continuing to work on my Mac - the iMac screen displays the Mac desktop as normal.
However, if I put the movie into fullscreen mode (view -> fullscreen on the iTunes menu), the external monitor displays the movie in fullscreen mode as it should, however the iMac monitor goes black.
The only way to fix this is to exit fullscreen mode and go back to one of the view options (rg fit to screen).
Any ideas how I can have my external monitor in fullscreen mode and have my desktop back?
Many thanks
SMI have an iMac with iTunes 7.7/Leopard and an external VGA monitor (I use the standard Apple mini-DVI to VGA converter) then I use the external monitor to watch video from my iTunes library.
All works well - I have my desktop spread over both monitors, I fire up a movie from iTunes, move the video window across to the external monitor and everything is good - I can watch the video on the external monitor whilst continuing to work on my Mac - the iMac screen displays the Mac desktop as normal.
However, if I put the movie into fullscreen mode (view -> fullscreen on the iTunes menu), the external monitor displays the movie in fullscreen mode as it should, however the iMac monitor goes black.
The only way to fix this is to exit fullscreen mode and go back to one of the view options (rg fit to screen).
Any ideas how I can have my external monitor in fullscreen mode and have my desktop back?
Many thanks
SM -
How to i fix a flicker on my iMac screen?
My imac screen has just started flickering. I have researched it and it already a promblem with other mac's. How is this problem fixed? Thanks
You could reset the pram and smc to see if that helps. I would however suggest if the machine is within waranty you contact your local Apple store as this sounds like a hardware fault to be honest.
-
Hi,
I'm trying to run a visual experiment using PsychToolbox in Matlab.
I've attached a secondary monitor to my iMac for this purpose and I'm having difficulties trying to
'black out' the iMac screen.
I need the secondary monitor to run at a refresh rate of 120Hz and at linearised luminance (did this for my secondary monitor),
so I can't really use my iMac screen. However, i need my iMac screen to be darken out because I'm doing a vision experiment.
I tried dimming my iMac screen but it doesn't go completely dark. I tried Ctrl+Shift+Eject (or was it Command) but it will darken both
monitors. I also tried mirroring, but it doesn't seem to work too.
I'm really stuck and any ideas will be greatly appreciated!
shui
NB:I'm using OS X Version 10.8.3.I do not know the details of your experiment, but creating a black monitor is not difficult. For example a completely black page, e.g. in Power Point, set to fill the screen?
The advantage of doing this with PP is that you can move in to or out of the black page with just the space bar. You can set up your monitors so PP is displayed on just one monitor. -
24 imac screen freeze hard drive reinstall&hardware test ok
24 imac screen freeze hard drive reinstall&hardware test ok
Do you have a question? If so please ask it and provide more information. If English is not your native language please use Google Translate .
Maybe you are looking for
-
Using JHeadstart to generate shuttles for updates
Hi guys, Using JHeadstart 11.1.1.3 - is it possible to generate shuttle boxes for the simple task of updating records. For example - in the leading list I want to see all employees with a status of 'ACTIVE'. In the trailing list I want to see all emp
-
ICal event have disappeared after upgrading to Lion. Please help!
After upgrading to Lion, pre-existed calendar events (Newer ones) have disappeared. How can I recover?
-
Recalculation of quantity in free goods for return order wrf to invoice
Hello everyone, I want to recalculate quantity of free goods category in a return order created with reference to an invoice, if the quantity in the High Level Item Category has changed. For example, a customer bought 100 boxes of product "A " and re
-
The Dock keeps returning in Quicktime full screen mode
Hi all, hope someone has some insight as this is really starting to get to me... when watching stuff in QT every time at some point the dock will reappear on top of the movie and i will have to cmd+F out and back in to get rid of it, sometimes it com
-
Hi! After installing and removing PHP 5.3 i have a problem with mySQL. it will not start again. Now i just wont to know, if its possible, to reinstall the system without installing all programms again. If i use the install cd. it will say, thats the