Imac screen stops refreshing content and has to be restarted

Yesterday my iMac stopped refreshing the browser and other apps on the screen when changed or moved. I had to restart to get the screen back - unsure why - it works now for a few hours and then i have to go through this process?
Any ideas?

Yesterday my iMac stopped refreshing the browser and other apps on the screen when changed or moved. I had to restart to get the screen back - unsure why - it works now for a few hours and then i have to go through this process?
Any ideas?

Similar Messages

  • An insect got behind the screen of my MacBook and has since died, leaving a black dot on the screen. As this is a sealed unit the insect cannot be removed, any ideas.

    An insect got behind the screen of my MacBook and has since died, leaving a black dot on the screen. As this is a sealed unit the insect cannot be removed, any ideas.

    I believe your only option will be to get Apple to replace the screen for you, which won't be cheap.  If the machine is still covered under warranty, you could try to push the case that the screen must be defective for a bug to get in there.  Apple has been known to do free out-of-warranty service in some pretty unbelievable circumstances, that that is at their discretion, so be very pleasant and polite so they'll like you and want to help you out.    But be prepared to have to pay for the repair.
    Good luck!

  • My iPad has not been dropped or damaged at all. The screen is grey fuzzy and has coloured lines down the middle. iPad 3 also.

    My iPad has not been dropped or damaged at all. The screen is grey fuzzy and has coloured lines down the middle. iPad 3 also.

    Basics from the manual are restart, reset, restore.
    Try all of these.
    If these fail, then:
    iOS: Unable to update or restore

  • My IMAC screen went to sleep and I have it set to enter a password upon waking it up. However, my bluetooth keyboard died while it was asleep and I replaced the batteries and tried to enter my password and it is not picking up my keyboard. What can I do?

    My IMAC screen went to sleep and I have it set to enter a password upon waking it up. However, my bluetooth keyboard died while it was asleep and I replaced the batteries and tried to enter my password and it is not picking up my keyboard. What can I do? I will not let me enter my password to get in and trouble shoot the keyboard. Please Help!!

    I pushed in the button on the top right corner. It turns a green light on and then it goes off. I held it in until it started blinking. It blinks for a bit and then the green light turns off. I am still not able to type my password. What should I do now?

  • I have a problem in iPhone . When you receive a contact and press the key at the top to cancel the contact screen stopped working .ataml times after the last restart device

    I have a problem in iPhone . When you receive a contact and press the key at the top to cancel the contact screen stopped working .ataml times after the last restart device

    Since restarting did not help, reset your iPhone, see: Turn your iOS device off and on (restart) and reset  http://support.apple.com/kb/ht1430
    If that still does not solve it, check, if the contact you are trying to add is problematic. Try to save a different contact. Does that work?
    If not, reinstall the Contacts app. This is only possible by restoring your iPhone, unfortunately.
    See: Use iTunes to restore your iOS device to factory settings  http://support.apple.com/kb/HT1414

  • MacBook Pro continues to reboot then shows main screen with flickering green and white lines then restarts again what the heck is wrong with it?!

    MacBook Pro continues to reboot then shows main screen with flickering green and white lines then restarts again what the heck is wrong with it?!

    Sorry we can't assist with that, you'll have to take it to Apple.
    If it's not worth fixing then you may be interested in this User tip
    My computer is not working, is my personal data lost?

  • 21.5 mid-2011 iMac screen keeps glitching out and then eventually goes black.

    At the end of August 2011 I purchased a 21.5-inch iMac and just last week (8 or so months later) the screen started to glitch everywhere and then eventually turned black. It has been happening quite regularly and has become quite an issue. Before then it had been running perfectly, and we had had no problems at all. However when the screen goes black (as if it was asleep) you could still hear things playing in the background (such as the noise that the volume key makes when you press it on the keyboard). We have eliminated all possible interference problems (turned off: wifi, phone's, TV, lamps and even the fish pump) and have also had it tested by license technicians for software and hardware issues (which came back clean). So then they replaced the screen thinking that was the only other possibility, and when we brought it back home it started to do it again. I have no idea anymore and I was hoping that someone could tell me what might be going on, otherwise I will get it replaced under extend Apple Care warranty.
    Thank you and the main specs are below:
    2.7Ghz quad-core Intel Core i5 processor
    4GB Ram
    1TB hard drive
    AMD Radeon HD 6770M graphics processor with 512MB of GDDR5 memory

    Heloo,
    Don' turn off the Fish Pump!
    ~BDAqua
    http://www.yelp.com/biz/b-and-d-aquarium-seattle
    Ray C was a bit out of touch & was speaking of a place a half mile away that supports "Growers" for Hydroponic stuff... LOL
    Anyway...
    Get Temperature Monitor to see if it's heat related...
    http://www.macupdate.com/info.php/id/12381/temperature-monitor
    iStat Menus...
    http://bjango.com/mac/istatmenus/
    And/or iStat Pro...
    http://www.islayer.com/apps/istatpro/

  • IMac Screen it turn bight and dark in a second.

    I had a problem with my iMac screen, sometime in a second my screen turn the bright to brightness and then turn darkness, bling bling ( please note that it not because of sensor of iMac depend on the light around) I felt there is something wrong with my VGA. Please let me know is there any other way I could fix it without bring it to Apple Store. Thank in advance.

    You could run the Apple Hardware Test from your install disc.
    http://support.apple.com/kb/ht1509

  • How,can,i,recovery,photos,from,phone,5,with,,broken,screen,,in,recovery,mode,and ,has,password

    How can i recovery photos from phone 5 with broken screen inrecovery mode and has,password

    Hi Tsorbie,
                      I am sorry to tell you that you cannot recover photos once your iPhone is on recovery mode.
    Regards,
    J_Kim

  • HT201274 tried to erase all content and phone will not restart

    Itried to erase all content and now the phone will not restart. What do I do?

    Connect to iTunes on the computer you usually Sync with and “ Restore “...
    http://support.apple.com/kb/HT1414
    If necessary Place the Device into Recovery mode...
    http://support.apple.com/kb/HT1808

  • Why, if I have to restart my iMac does the terminal open and I have to restart again to make Mail (6.3) open without showing it offline?

    Why, if I have to restart my iMac, does the terminal openm and why do I have to restart again to make Mail (6.3) open without showing it offline?
    early 2009 iMac 320  4GB memnory

    Triple-click anywhere in the line below to select it:
    osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
    Copy the selected text to the Clipboard (command-C).
    Launch the Terminal application.
    Paste into the Terminal window (command-V).
    Post any lines of output that appear below what you entered — the text, please, not a screenshot.

  • I have a desktop iMac that has been running very slowly lately.  I turned off the computer yesterday to initiate a restart and when it came on, the screen was all white and has stayed that way.  Please help!

    I have a desktop iMac that has been running very slow lately.  I turned off the power yesterday, thinking a restart may help.  When I turned the power back on, the screen turned white and stayed white.  Any ideas???

    Welcome to Apple Communities
    http://support.apple.com/kb/TS2570

  • My g5 imac will not turn on and has a flashing white light

    Could somebody please advise me?
    I tried to install RAM in my imac g5.
    Unfortunately I purchased the wrong RAM so when I opened the bottom I took out the original RAM to compare the two and put the original (512mb) back in, closed the compartment and sealed the bottom with the two screws again.
    When I tried to turn the imac back on the screen was blank and the white light in the bottom right hand corner was repeatedly flashing.
    Help...

    I had the same issue.  Found another post that you need to push with surprising force with two thumbs.  I did so, felt a slight click; started it and we're golden.  Pulling the old RAM out though, I realized it has little tolerance for torque without jamming.  So save the force for when you are certain you are in straight.

  • My iMac screen suddenly turn black and white when I'm in fullscreen mode. What could be the cause of this problem?

    Hi, once in a while the screen on my 5K imac turns black and white when I'm on youtube watching videos in fullscreen mode. It also exits the fullscreen mode automatically from one second to the next and a warning pops up saying how I can exit the fullscreen mode. Does anyone have an idea why this happens and if this is a software or hardware problem?

    I'm using a Dell laptop with Windows 7. I've set the resolution to 1024x768, though the maximum resolution on this can go as high as 1366x768. So this is a problem that no one has been able to figure out? I've ran lots of other Flash-based applications that went fullscreen with no problem, so I'm wondering what other methods there are to try, if possible.

  • Iphone5 screen doesn't work and has weid pink stripes

    So i dropped my phone accidentaly today not from high but it flyed long.
    After that the screen didnt work anymore it didn't respond.
    And is has those weird stripes.
    So my problem is that i had everything in my phone and i tried to make
    a copy of my phone on computer but it didn't work cause i need to unlock the phone and i can not to do that.
    And Icloud have been choice but i taked pictures/videos downloading on Icloud off
    And Siri come in the screen when i push the homebutton but it dont respond the speak.
    Is there anything i can do my only promblem is that i need to copy my phone but how
    cause it wont unlock,and Itunes tell to unlock the phone?

    Apple  should offer an Out-of-Warranty exchange unit for your damaged iPhone .In Finland it is 249 Euros over the counter ,or there is a mail in service
    How do I obtain service for my iPhone?
    The iPhone support site has troubleshooting articles to help you solve your iPhone issue on your own. If you have reviewed those articles and still need service for your iPhone, you can contact your carrier if you purchased your iPhone from your wireless carrier or Apple if you purchased your iPhone directly from Apple. If you seek service in a member country of the European Economic Area or Switzerland that is not the country of original purchase, please view this article for available service options.

Maybe you are looking for

  • How to read and write a data from extrenal file

    Hi.. How to read and write a data from extrenal file using Pl/sql? Is it possible from Dyanamic Sql or any other way? Reagards Raju

  • Excise duty calculation on Assessable value in PO

    Dear Team, We are facing critical issue in Excise Duty calculation, Excise is calculating on basic price for our normal procurement and we are selling the same at MRP cost... Now the issue is Excise Duty has to be calculated on Assessable value (65%

  • Duplicate output message for invoice

    Hello, I'm searching a Bapi or MF to duplicate an output message executed on invoice. For exemple: on invoice 12345 I create and execute the message RDA0 (for exemple for print). Now, by a zprogram I would duplicate this message. Any idea ? Thank you

  • Problems while creating local service order on client in MAM

    I have MAM2.5 on PC. I have created a local notification and synced it. based on that notif , I am trying to create a service order.But after Sync , I get following error in monitor (merep_mon on MI server) under MAM_001: Return code from RFC BAPI Wr

  • Remote access without screen sharing?

    I have an iMac and a MacBook Air. I'd like to remotely access the iMac from the Air on my local network, so I can take advantage of the iMac's superior processing power and file storage, while sitting in a different room. The problem is that my iMac