IMac & Snow Leopard - Airport internet sharing: WEP only?

Hello guys, happy owner of a 24 inche iMac.
Found out I can turn my iMac into a wireless access point by enabling airport internet sharing (system preferences > Sharing > Internet). That's nice because in my setup that would be better than paying for a wireless router and having even more cables and ac adapters cluttering up the place.
But, the airport settings for internet sharing only allows for WEP. No WPA??? That's a bit surprising, and a bit disappointing. I'd rather leave this sharing enabled all the time and I'm not thrilled about using WEP (everybody says it's pretty unsafe)like that.
Is there a way around that?

I a in a similar situation. I am sharing my cable/ethernet connection with a powerbook & an iphone quite happily. But my niece's pc will not connect. It insists on WPA, stating that the WEP is not secure enough, yet it quite happily connects if I remove the pass key altogether.
Can anyone help?
The pc does suggest performing a manual connection but I cannot find the details (ip address etc) in my iMac

Similar Messages

Networking imac (snow leopard) to power pc (tiger)

Trying to network my new iMAC (snow leopard) to my older Power PC (tiger). The iMAC can see the computer, however it comes up as connection failed every time I try to connect. I have other macs network to both of these computers, however there seems to be an issue with this iMAC to Power PC/TIGER.

Not that I can offer any help with the OP's problem but I also have a similar issue. In my case, I have three computers: an iMac i5 quad-core running Lion (10.7.1), a mac mini core 2 duo (the last one made just before the i5 versions) running Snow Leopard (10.6.8), and an iBook G4 running Leopard (10.5.8). The Lion machine and the Leopard machine can share via AFP and Screen Sharing both ways just fine. The Snow Leopard machine sees the Leopard machine and can share via AFP but gets a "connection failed" when attempting a Screen Sharing. The Leopard machine can see the Snow Leopard machine in the Finder but attempts to connect to it via AFP or Screen Sharing gets a "connection failed" message. Neither the Lion nor Snow Leopard machines see each other in Finder.
On the Lion machine I can do a manual "connect to server..." with the SL machine's IP and can get an AFP connection but only for a few minutes before a message appears on the Lion machine that says, to the effect, that the SL machine had some sort of issue and dropped the connection. The same goes for a manually started Screen Sharing session from Lion to SL.
On the Leopard machine I can also connect to the SL machine via the manual methods, but after a few moments an error message pops up on the Leopard machine that says there was a problem with the SL machine, and the connections get dropped.
On the SL machine, I cannot even connect manually to the Lion machine but can do the manual connections to the Leopard machine, that is until the connection gets dropped after a varying amount of time.
All three machines can find the HP Photosmart printer/fax/scanner that is connected to the AirPort Extreme wirelessly. The SL machine has the oft bemoaned problem with printing that everyone still seems to have problems with but the Lion and Leopard machines use the print/fax/scan device without issue. The Lion and SL machines are connected wirelessly to the AirPort Extreme; the Leopard machine uses an ethernet connection to the APExtreme. All computers and the printer have statically assigned local IPs within the assignment range of the AP Extreme.
The baffling thing about all of this is this... CrashPlan works and is backing up all of the machines to each other without issue. I don't have any other third-party networking software shared among them but it appears that only the Apple software (Finder, Screen Sharing, and the AFP protocol) seems to have a problem and it seems to be centered around the SL mac mini.
No problems existed when the mac mini (purchased late July 2011) came out of the box. It was only after the software updates took it from 10.6.4 (it's factory installed version) to 10.6.8 that these odd networking issues ensued.
Lion is expected to be installed on the SL mac mini at some point in the future but, until the users of that mini find suitable replacements for their old PPC-based software they still use on a daily basis, that upgrade is put on hold.
Any ideas on how to even begin to troubleshoot this kerfluffle? I'm tempted to wipe the HD of the mini and restore the factory 10.6.4, reinstall the apps, and copy the users' files (but not preferences, caches, etc.) back into newly created user accounts. What's stopping me is that the users of this machine do not want me to do so until such time they're ready to install Lion on it. :/
Appreciate anything that is constructive... thanks.

Airport Internet Sharing Problem Mini - PC Laptop

Airport Internet Sharing Problem
My setup is:
Cable Modem -> Mac Mini --> PC Laptop
... with the connection between the mac mini and the PC laptop being the built-in mac mini airport using internet sharing.
Hi, I've been trying to set up Airport internet sharing with the mini, to no avail. It works off & on, but invariably the internet connections drop after about 10 minutes. The only way to get it started again, is to go into internet sharing, turn off internet sharing, then turn it on again. It will work for another 10 minutes or so (slow) after gong back to the PC laptop and reconnecting, then it chokes again.
I've tried the connection both with & without WEP, same behavior. I read somewhere that OS X only plays well with using Channel 1, so I tried that. No luck. Tried with and without Interference Robustness, no luck.
Tried with WEP on and using 40 bit hex keys using a "$" prepend in the mac as suggested on this web page:
http://www.macosxhints.com/article.php?story=20030803030354585
Same behavior, works for 10 minutes, then it chokes again.
Tried with & without the firewall.
Yes, personal web sharing is on.
The PC laptop works fine with any number of other wireless routers out & about town, at my girlfriend's house, so forth.
Any chance I have a bum mac mini wireless card or antennae or something? The reception strength on the PC laptop is good.
Just don't know what to make of it. So stupid, it seems like something pretty basic that ought to work.
Yeah yeah tell me to get a wireless router, but I'm not going to do that, that's one major reason I bought the mini in the first place and it would be nice if it worked as advertised.
Any other suggestions?

Works better now...
this is me again. A week ago or so, I noticed there was an automatic update to the wireless on the mac mini.
Since then the performance is much improved. My PC laptop connection to the mac mini no longer drops spontaneously.
Much improved! Thank you very much!
Yes, on occasion, when I leave and then come back to use the wireless, the laptop will not reconnect after multiple attempts; I have to turn of internet sharing and flick it back on again, but then it works all evening fore hours and hours straight with no problems.
Thanks Apple! It's usable now!

Does Airport Internet Sharing Support WIFI Mode G?

I am trying to connect a Nokia N810 Internet Tablet to the Internet via Internet Sharing. The N810 only supports B and G mode WIFI. I can't get a connection. Does Airport Internet Sharing Support WIFI Mode G? Do I have to configure for this?
Thanks

I am trying to connect a Nokia N810 Internet Tablet to the Internet via Internet Sharing. The N810 only supports B and G mode WIFI. I can't get a connection. Does Airport Internet Sharing Support WIFI Mode G?
Yes.
I've used my 802.11b/g/n capable MacBook to share an ethernet connection with my 802.11g ONLY iPod Touch.
Does the N810 see the network?
Does any other WiFi capable device in your home see the Internet Sharing SSID?
Did you give your Internet Sharing a password? Internet Sharing uses WEP for encryption, and the rules for creating the WEP Hex key from a text string password are different for Macs vs everyother WiFi device in the world. 1st try no password. If that works, then move on to using a simple 5 character password for 40/64 bit WEP, or a 13 simple password for 104/128 bit WEP.
Message was edited by: BobHarris

All 30 minutes my Macs (iMac/Snow Leopard, MacMini/Lion) are loosing the connection to the Windows Servers (2 Networks: Home with Home Server 2011 (Server 2008) and Office with Home Server V1 (Server 2003)).

Hallo,
Ich betreibe im Büro und zu Hause jeweils einen Microsoft Home Server. In beiden Netzwerken ist neben diversen Windows Rechnern auch ein Mac vorhanden.
Die jeweilige "Konfiguration" ist wie folgt:
- Apple MacMini (Late 2011, als HTPC) mit Lion per Wlan über AVM Fritzbox 7390 an Microsoft Windows Home Server 2011 (Windows Server 2008).
- Apple iMac (Late 2010, Arbeitsplatzrechner) mit Snow Leopard per Lan über AVM Fritzbox 7270 an Microsoft Windows Home Server V1 (Windows Server 2003)
Alle Betriebssysteme sind auf aktuellem Stand.
Die Fritzboxen laufen mit der jeweils aktuellen Firmware
Nun zu dem Problem:
Beide Macs unterbrechen ca. alle 30 min den Kontakt zum Server. Die Verbindung wird zwar ca. 1-2 Minute später wieder aufgebaut, aber am MacMini (HTPC) macht sich dadurch bemerkbar, daß der Film oder die Musik für obige Zeitspanne stoppt und danach weiterläuft. Beim iMac (Arbeitsrechner) kann ein zuvor vom Server geladenes Dokument dann nicht mehr gespeichert oder gedruckt werden.
Der MacMini hat dieses Phänomen direkt bei der Verbindung mit dem WHS gezeigt. Der iMac hat jedoch zuvor ca. 1,5 Jahre ohne Probleme funktioniert. Dieses Problem tritt bei dem iMac (Snow Leopard) erst seit ca. 6-9 Monate auf.
Da unterschiedliche WHS und OS X Versionen betroffen sind und auch unterschiedliche Fritzboxen verwendet werden und scheint ein allgemeines Problem im Zusammenspiel Windows/OS X vorzuliegen.
Bei dem iMac fällt der genaue Zeitpunkt der Verbindungsunterbrechung nicht auf.
Bei dem MacMini läßt sich der Zeitpunkt dagegen relativ leicht bestimmen. Aus der Ereignisanzeige beim Windows Server ergibt sich leider kein eindeutiges Fehlerbild. Zu dem jeweiligen Zeitpunkt taucht aber relativ oft, aber nicht immer (!), in "Windows-Protokolle Sicherheit" der Fehler 4625 ("Fehler beim Anmelden eines Kontos") auf. Dies würde auf eine Rechteproblematik hindeuten. Das Konto des Mac kann aber alles was ihm auf dem WHS erlaubt ist.
Beim Suchen nach einer Lösung (bisher leider erfolglos) bin ich u.a. auch über das Problem des Server Infrastructure License Services (silsvc) beim Windows Small Business Server 2011 Essentials gestolpert (auch alle 30 min!). Vielleicht ein Zusammenhang?
Hello,
I run the office and at home each a Microsoft Home Server. In both networks, in addition to various Windows computers, a Mac is available.
The particular "configuration" is as follows:
- Apple MacMini (Late 2011, as HTPC) with Lion via wifi via AVM Fritzbox 7390 to Microsoft Windows Home Server 2011 (Windows Server 2008).
- Apple iMac (Late 2010, desktop PC) with Snow Leopard by Lan on AVM Fritzbox 7270 on Microsoft Windows Home Server V1 (Windows Server 2003)
All operating systems on current conditions with all patches and updates.
The Fritz boxes running with the latest firmware
Now to the problem:
Both Macs are loosing every 30 minutes the contact to the server. The connection is "re-"established about 1-2 minutes later. On MacMini (HTPC), the film or music is stopped for the above period. Thereafter, the film / music goes on. With the iMac (workstation) a document loaded from the server can no longer be saved or printed.
The MacMini has shown this phenomenon directly in connection with the WHS. However, the iMac has been working about 1.5 years with no problems. This problem only occurs for about 6-9 months
Because of different WHS and OS X versions are affected and also different Fritz boxes are used and it seems to be a general problem in the interplay Windows / OS X to be present.
When the iMac is the exact date of disconnection does not occur.
With the Mac Mini, the time can however be determined relatively easily. From the Event Viewer on Windows Server is unfortunately no clear error image. At the particular time but appeared relatively often, but not always (!) In Windows Security Logs the error 4625 (Failed to log on an account) on. This would indicate a rights issue.
Searching for a solution (so far unsuccessfully, unfortunately), I stumbled over the problem of the Server Infrastructure License Services (silsvc) in Windows Small Business Server 2011 Essentials (every 30 min!). Maybe a connection?

Hi, and thank you for your reply!
My reason for not posting this in the server forum is that I suspect it is a clien issue. All my other clients connect happily to the server which leads me to believe the server is configured correctly.
Only my the two MacBook Pro's are having problems.

I want to restore my iMac Snow Leopard 10.6.8 to Factory Settings

Hi,
I want to restore my iMac Snow Leopard 10.6.8 to Factory Settings but the problem is I don't have OS Disc because it wasn't shipped with iMac. Also, when I restart the system and press Command+R nothing shows it just starting as usual. Could you help me please?
Regards.

Command + r won't work with Snow Leopard (OS X 10.6) - it only works with Lion and Mountain Lion. Did you buy the Mac new - if so it would have shipped with 2 grey disks, one for restoring and one with the iLife apps and a few other bits. If these are missing you'll need to call Apple and purchase replacements giving them the serial number of the Mac. They will make a modest charge for this.

How do I send files from my IMAC via bluetooth to my ne Ipad. They will not "pair" but they are connected and discoverable. I send a file from Imac snow leopard OS X 10.6 to the ipad but the failure message says the ipad does not have the ncessary servr

How do I send files from my IMAC via bluetooth to my new Ipad? They will not "pair" but they are connected and discoverable. I send a file from Imac snow leopard OS X 10.6 to the ipadusing bluetooth, but the failure message says the ipad does not have the necessary services. What are these? Do I neeed to have iphoto and ms word to send pix and .doc files?

File Sharing over Bluetooth is not a feature of iOS devices. iOS does not include the required Bluetooth profiles to allow this. You cannot add this feature, so you may as well stop trying.

Can i sync my ipad mini to my imac snow leopard and then to my iphone4

can i sync my ipad mini to my imac snow leopard and then to my iphone4

iCloud requires OS X Lion (10.7.2) or higher. You will need to upgrade to either Lion or Mountain Lion in order to set up iCloud on your Mac. First check to see if your system meets the system requirements to upgrade.
Lion system requirements are:
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
Mountain Lion system requirements are shown here: http://support.apple.com/kb/HT5444.
If you can run Mountain Lion, you can purchase an upgrade from the Mac App Store. If you can only run Lion, contact the online store in your country and purchase a download code to download it from the Mac App Store.
After upgrading, you will find iCloud in System Preferences>iCloud on your Mac, and can set it up as explained here: http://www.apple.com/icloud/setup/mac.html.
Before upgrading, you may want to check the compatibility of your existing programs by checking here: http://roaringapps.com/apps:table.

I downloaded latest software on iphone 4 and installed new software on my imac (snow leopard 8.6 and now phone not synching with new itunes. Itunes does recognize the phone but the itunes is totally different now. It doesn't look anything like the previou

I downloaded latest software on iphone 4 and installed new software on my imac (snow leopard 8.6)and now phone not synching with new itunes. Itunes does recognize the phone but the itunes is totally different now. It doesn't look anything like the previous vesions. I can't even find a tab for synching. very strange. any help is appriciated.

iTunes 10.7 is compatible with Snow Leopard.
You can download it here: http://www.apple.com/itunes/

I have an IMAC snow Leopard version 10.6.8 How do I update Safari?

I have an IMAC snow Leopard version 10.6.8 How do I update Safari?

What version of Safari are you running now (click on safari in the menu bat , about Safari)
5.1.10 is the latest version for SL.If you are getting a message from Yahoo saying you need to update Safari, ingnore it, it is an issue at their end.
If you have a lower version than listed above,
Make sure you have run these 2 updates:
http://support.apple.com/kb/DL1399
http://support.apple.com/kb/DL1678

What is best password AP to sync with Imac (Snow Leopard)?

What is best password AP to sync with Imac (Snow Leopard)?

Here are a few analog to digital devices and approaches I have had success with:
1. Sony DA-2
2. Most Name brand Firerwire or i.Link Minidv Camcorders with Digital Pass thru feature will suffice since more often than not this feature is also included ... But read the owner's manual or check online to make certain it's included.
3. Canopus products work perfectly nearly 100% of the time and will keep the video and audio in synch much better than other devices. It can take the form of a pci card (if your mac is so equipped) and if not, then a canopus media converter box will also work (as already mentioned above):
click here:
4. Another approach I use to simply "dump" mini dv or VHS tapes to Dvd-R is a DVD Player/Recorder like the one shown below with Digital inputs. In this case (i.Link / FW)):
click here
Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software / products that may be mentioned in this topic. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information above at your own discretion.
Message was edited by: SDMacuser

After connecting my Sony camcorder to imac (Snow Leopard) to import a video the import window does not open. I have imported videos from the sam camcorder successfully before. What could have happened? Puzzled)

After connecting my Sony camcorder to Imac (Snow Leopard) to import a video to imovie 09 the import window does not open. In the past I have successfully imported videos from the same camcorder. What could have happened? Puzzled

Oh my! Obviously, I don't know what I'm doing. But I do know that my goal was to do both---backup AND free some space. My iMAc is old (2006) and I upgraded it a year or so ago to Snow Leopard. I didn't think I had the capability of backing up without an external drive, but maybe I do since I upgraded. Do I?
But I bought this My Book mostly for freeing space because I like to make cards in Photoshop and I'm forever running out of space when I get too many layers (don't really know what I'm doing there, either).
Is there some way that I can rectify my mistakes and start all over?
Thank you so much for beng so prompt with your reply and patient with mine. I tried for so long to see the dialog box with the library listings. When I launched iPhoto, even with holding down the Option key, it kept immediately launching into the full screen. Finally, after an hour of doing it over and over again, it worked when I held the key down for 5 minutes. Then when I was typing my reply, I kept getting a message to "Request Time Out." Didn't know how to do that, so kept hitting the OK button and kept typing for another half minute. Finally, when ready to send, Safari couldn't do it. "Try again" exasperated me until I realized I would have to begin again and use Firefox. When I got there and ready to type, I got the message that my message had been retrienved and did I want to use it?!!
So your kindness is very much appreciated.

If have MBA (lion), imac (Snow Leopard), iphone (ios 4) will icloud sync all three?

I have a Mobile Me account. Will MBA (lion), imac (snow leopard), iphone 3s (ios 4) synch from icloud?
Thanks

At it's heart Lion is OS X. Yes it has new features and like any product you may like some and not have a use for others. The IOS desktop look alike on Lion is called Mission Control, while I've played with it I have no need for it either and rarely if ever look at it. However for someone that has used OS X for several years it's not necessary, my guess is it's designed for those that want to transition from a IOS device to a Mac.
The success of any major upgrade is in the preparation. You have done one of the first steps to see your software is up-to-date. You may want to check with the apps you use frequently and see if they have updates too. I use a free tool called AppFresh that survey's all the apps on my computer and lets me know if updates are available. You can download AppFresh from Macupdate.com if you are interested. Next make sure your computer meets Lion System requirements which are:
Mac OS X Lion System Requirements
In order to install Mac OS X 10.7 you will need:
Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of RAM (I'd recommend 4GB or more)
Mac OS X 10.6.6 or later with the Mac App Store installed
At least 4GB of additional disk space to accommodate the download, but more is obviously recommended
Once your machine has met the hardware and software requirements then you're ready to get Lion installed. As with any update again do a little preparation, I'd recommend using the suggestions in this Update Process post. This all sounds like a lot of work but it makes for a fun Saturday afternoon project if you like to tinker a bit.

Is there a way to connect an old Sunflower iMac (OSX 10.4.11) to a new Time Capsule? It used to work with old Airport Extreme with updates thru Snow Leopard but now seems to only allow WEP encryption instead of WPA.

Is there a way to connect an old Sunflower iMac (OSX 10.4.11) to a new Time Capsule? It used to work with old Airport Extreme network, run from a intel iMac with updates thru Mavericks but now seems to only allow WEP encryption instead of WPA and can't connect to Time Capsule. Airport Extreme Base was controllable from either computer up through Snow Leopard (I didn't do any of the Lion upgrades). Then when I upgraded to Mavericks I lost the ability to use Airport Utility with this hardware on the Sunflower but could still connect wirelessly to network without any problems. But now with the Time Capsule upgrade the Sunflower is blocked from network by a dialogue that requests ony WEP password, not WPA pwd used by Time Capsule. Neither can I use the old airport extreme base to extend the time capsule network since I can't input the correct password/encryption approach to join it. Is there a work around? Would a newer but old Airport Express be able to extend network to Sunflower? Or maybe a third party wireless (such as Netgear, Dlink, etc) that has browser type control rather than special utility?
Another question--before I used MAC addresses to control who could access network. Now on Time Capsule I don't see anything about this--so is it true now that the only access control is via WPA2 pwd now (which appears to be the encryption pwd and not the time capsule pwd)?

Is there a way to connect an old Sunflower iMac (OSX 10.4.11) to a new Time Capsule?
I can’t claim to completely grasp the issue(s) you’re describing, but the underlying problem is presumably your iMac’s obsolete AirPort card. Whatever the case, an obvious (if not particularly helpful) answer to your stated question would be to connect your iMac with an ethernet cable, using powerline adapters as an alternative if you don’t want to have wire running all over the place.
My still fully functional clamshell iBook, with an original AirPort card, connects wirelessly to my 4th Generation TC network by means of a cheap 802.11b/g/n USB Wi-Fi adapter. This might be an option for you too.
Another question--before I used MAC addresses to control who could access network. Now on Time Capsule I don't see anything about this
When you edit your TC's settings the access controls appear under the Network tab, don't they?

Airport Express, Leopard and Internet Sharing

I have my internet connection running directly to my iMac's ethernet connection and I use the Internet Sharing option to share my connection with computers. I had been using my Airport Express just to connect to my iMac for Airtunes. My Airport Express has stopped working and is not located unless I shut off Internet Sharing, but if I turn that off, it will not let me set the Airport Express to connect to an existing network - I guess because the network does not exist because I shut it off to configure the Airport Express. This is driving me crazy - any thoughts?

Interestingly, it works again. To initially configure the Airport Express, I had to shut off internet sharing. I configured the Airport Express (I did a hard reset to clear everything out) using the Airport Utility and set it to join an existing network. Of course my network did not show up since I had shut internet sharing off, but I manually typed in the name and password that I had already set for the internet sharing. I also put in a name and password for the base station, but this isn't required.
Then I hit update and right when it says that the configuration has been changed and it is waiting for the Airport Express to restart, I turned internet sharing back on. I waited and after flashing yellow for a while it connected. I unplugged it and plugged it back in to make sure it was fully configured and it works. I have found in the past the unplugging and plugging back in solves a lot of problems too.
Now that it is all set up, I can see and reconfigure the Airport Express in the Airport Utility even when internet sharing is on.
Hope this helps.

IMac & Snow Leopard - Airport internet sharing: WEP only?

Similar Messages

Maybe you are looking for