IMac starting and shuts down after less than one minute...

Hi !
I hope someone could help me with this problem...
I think I've tried everything... CMD+Alt+P+R / CMD+R / ... SMC...
I'm a little lost because I can't access to the computer (it shuts down before arriving on the desktop). I've also tried to access just to the hard drive by connecting 2 Mac with Firewire cable... And the same problem appears. The iMac is also shutting down to soon to backup anything...
Is there someone who has experienced the same problem ?
Thanks !
Best regards,
Jonathan.

Hi Jonathan..
Just to rule out any hardware issues, might be a good time to run the OS X Lion: Use Apple Hardware Test

Similar Messages

  • My itunes will stop working and shuts down after 5 to 10 minutes playing. I have the most recent updates. How can I repair or correct this from crashing?

    My itunes will stop working and shuts down after 5 to 10 minutes playing. I have the most recent updates. How can I repair or correct this from crashing?

    Hello there, jbenjaminii.
    The following Knowledge Base article offers up some great recommendations for troubleshooting the issue you're describing:
    iTunes for Windows XP: Troubleshooting unexpected quits, freezes, or launch issues
    http://support.apple.com/kb/ts1421
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Ipod 2g will start and shut down after 10 secs on logo

    i will hold power button then it will start loading with the logo then after 10 secs it just shuts down and wont let me get to slider

    Try a hard reset. If that does not work, put it in Recovery or DFU mode and restore it.
    Basic troubleshooting steps 
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
     In Memory of Steve Jobs 

  • Hi my iMAc 27 inch starts up to the grey screen with apple logo and loading bar underneath it loads halfway then freezes up and shut down after a while please help

    Hi my iMAc 27 inch starts up to the grey screen with apple logo and loading bar underneath it loads halfway then freezes up and shut down after a while please help

    Try the tips listed here Mac OS X: Gray screen appears during startup - Apple Support

  • Slow start up and shut down after Zenworks installation

    I hope someone can help me out on this one. Not sure if I am posting the
    right forum or not but here we go. After I installed Zenworks on our PC's
    here at work, we have a noticed a distinct difference in how long it takes
    for the PC's to start up and shut down. Before installation, everything
    was very quick, like it should be. Now it seems to take some users 3-5
    minutes to start and shut down their PC's. The machines are running
    several different OS'es. Windows 98SE, Windows XP Pro SP1 and Windows XP
    SP2. No one OS has more problems than the other. Has anyone heard of
    Zenworks causing this issue or heard of a way to prevent this? I would
    really appreciate any help you can provide.
    Thanks!
    Jami Benson

    On Thu, 20 Dec 2007 09:12:26 GMT, Rolf Lidvall wrote:
    > See this article by Shaun Pond:
    > "Using Search Policies Effectively in ZENworks"
    > http://www.novell.com/coolsolutions/feature/15294.html
    I would also suggest to get either some training or self study material or
    read the online documentation
    Marcus Breiden
    If you are asked to email me information please remove the - in my e-mail
    address.
    The content of this mail is my private and personal opinion.
    http://www.didas.de

  • Just tried installing an update to OS.  Although the screen tells me that the installation will be completed in less than one minute, that was two hours ago, and the computer won't permit me to shut it down via the power button, as I get an error sound.

    Just tried installing an update to OSX Snow Leopard.  Prior to trying to update OS, I was running V 10.6.3.  During installation, it locked up.  Although the screen tells me that the installation will be completed in less than one minute, that was two hours ago, and the computer won't permit me to shut it down via the power button, as I get an error sound.  What do I do now?  Help!

    Hold the power key till it shuts down, it may take a little while, try holding it thru the warning.
    Then if it shuts down restart and open Safari/Preferences, General tab, and set "Save Downloaded Files to:"
    Select desktop, if desktop is not available in the the drop down menu, click other, then select Desktop from the column from the on the left.
    Then download this:
    http://support.apple.com/kb/DL1399
    This will download the "stand alone installer"
    Click on the installer pkg and follow the prompts.
    Hope this helps

  • G4 MDD FW800 starts up and shuts down after several seconds

    Hi all,
    My G4 MDD FW800 DP.1,48 starts up and shuts down after about 20 seconds. I Have reset PMU and checked battery voltage, witch was OK. (also had it out for 30 minutes with no power connected etc.) I have video and also tried with NOTHING connected. But still it just powers down and failes to enter start up procedure.
    Last time I had it running I pulled my iPod, beacause the computer did't see it, the next thing I saw on screen was the message to hold the power button for 5 to restart, after that I got the problem described above.
    Anybody?
    Thanks,
    G4 MDD FW800 DP1,48 Mac OS X (10.4.2)

    Hi, I don't know how fast it shuts down, but...
    How to reset the SMU/PMU on a Power Mac earlier G3, G4, G5 models...
    http://support.apple.com/kb/HT1939
    Have you done a PRAM reset, CMD+Option+p+r...
    http://support.apple.com/kb/ht1379
    In fact, do 3 in a row, takes a bit of time.
    Does it boot into Open  Firmware with CMD+Option+o+f ?
    http://docs.info.apple.com/article.html?artnum=42642
    reset-nvram (press Enter)
    set-defaults (press Enter)
    reset-all (press Enter)

  • Firefox freezes when I open it after less than a minute of searching. It freezes regardless of the website I'm on. I've tried reinstalling it several times and have even tried a clean reinstall but it didn't work.

    When I open it, Firefox freezes after less than a minute of use. After waiting a few minutes, it unfreezes but then freezes again a few seconds later. This happens regardless of the website I'm on. I've tried uninstalling and reinstalling it and the problem didn't go away. I've even tried a clean reinstallation but it didn't work. This only happens on Firefox. IE and Safari work fine.

    -Plug your MacBook into a power source.
    -Click on the Apple menu and select "System Preferences".
    -Click on the "Energy Saver" icon.
    -Click on the "Options" tab.
    -Uncheck the box labeled "Automatically reduce brightness of display before display sleep"
    -At the top, next to "Settings for:", select "Battery" from the drop down menu.
    -Uncheck the box labeled "Automatically reduce brightness of display before display sleep"

  • MacBook is starting to shut down after 5 minutes.

    My MacBook has just started to shut down after 5-10 minutes. The computer still holds a charge, and the battery Percentage says that it's full, so I dont know what's going on.

    If it's under AppleCare take it in immediately.
    It is possible that a fan might not be working, and causing it to overheat & shutdown as a safety measure.
    The other reason could be RAM.
    But that's just my guess.

  • My MacBook Pro starts and shuts off after loading for sometime

    My MacBook Pro starts and shuts off after loading for sometime

    Try starting in Safe mode by holding down the Shift key while booting. Safe mode takes a while to load the OS. After that, restart the computer normally.
    If that does not work, start up in Recovery by holding down the Command and R keys. In the window that opens, choose Disk Utility at the bottom and verify and repair your disk. Repair permissions while you are there.

  • Time Machine Migration hanging on "Less than one minute remaining"

    I decided to take a risk with my iMac and do an erase and install with Leopard, the version of OS X it's been running for years now. The reinstall went fine migration assistent got me started transferring my information from my Time Machine external USB 2.0 hard drive. It said it was just over 200 GB of information. That proceeded fine until it reached the "Less than one minute remaining" mark. It's been sitting here for over 12 hours in the "transferring files to support applications" process. What should I do? Is it alright for me to manually turn off the computer and re-boot? There is no cancel button or anything. I do get the pleasant clunking sound when I hit enter.

    Welcome to Apple Support Communities
    If you have connected both computers with a cable, disconnect and connect that cable again, so migration should continue. If it doesn't work, restart your MacBook Pro and check that all the files have been transferred. If not, open Migration Assistant and transfer your files

  • Latest update 7.1.2 stuck with less than one minute remaining

    I Couldn't download anymore apps and noticed I needed to update my software to the latest version so thought that this would solve the problem. I started the update at 11pm last night and after waiting 2 hours with it on  charge and connected to wifi it still said less than one minute remaining.  Searches on internet suggest a hard reboot but will this loose my apps as some I have are no longer available to get?  I have backed up photos etc to the cloud so not too worried about those.
    any advise please   Thanks in advance

    iOS: Apple logo with progress bar after updating or restoring from backup
    http://support.apple.com/kb/TS3681
    If you can't download apps, it's probably because you don't have sufficient storage space. You need to increase your Available space.
    iPhone, iPad, and iPod: Understanding capacity
    http://support.apple.com/kb/ht1867
    How much space is used by your Other? You may be able to reduce.
    How Do I Get Rid Of The “Other” Data Stored On My iPad Or iPhone?
    http://tinyurl.com/85w6xwn
    How to Remove “Other” Data from iPhone, iPad and iPod Touch
    http://www.igeeksblog.com/how-to-remove-other-data-from-iphone/
    With an iOS device, the “Other” space in iTunes is used to store things like documents, settings, caches, and a few other important items. If you sync lots of documents to apps like GoodReader, DropCopy, or anything else that reads external files, your storage use can skyrocket. With iOS 5/6/7, you can see exactly which applications are taking up the most space. Just head to Settings > General > Usage, and tap the button labeled Show All Apps. The storage section will show you the app and how much storage space it is taking up. Tap on the app name to get a description of the additional storage space being used by the app’s documents and data. You can remove the storage-hogging application and all of its data directly from this screen, or manually remove the data by opening the app. Some applications, especially those designed by Apple, will allow you to remove stored data by swiping from left to right on the item to reveal a Delete button.
    What is “Other” and What Can I Do About It?
    https://discussions.apple.com/docs/DOC-5142
    iPhone or iPad Ran Out of Storage Space? Here’s How to Make Space Available Quickly
    http://osxdaily.com/2012/06/02/iphone-ipad-ran-out-of-available-storage-space-ho w-to-fix-quick/
    6 Tips to Free Up Tons of Storage Space on iPad, iPhone, and iPod Touch
    http://osxdaily.com/2012/04/24/6-tips-free-up-storage-space-ipad-iphone-ipod-tou ch/
    Also,
    How to Clear Message/iMessage Cache on iPhone & iPad And Reclaim Lots of Free Space
    http://www.igeeksblog.com/how-to-clear-message-imessage-cache-on-iphone-ipad/
    What is Stored in iCloud and What is Not
    https://sites.google.com/site/appleclubfhs/support/advice-and-articles/what-is-s tored-in-icloud
     Cheers, Tom

  • HT204350 my migration was stuck for hours while it was in the "remaining less than one minute" phase of the mirgration complete

    I was using the migration assist from an imac to a macbook air both running the latest versions of mavericks.
    The migration strated and bioth computers were on the even count down. At the point when it stated less than one minute to completing the migration assist it just remained like that for over 12 hours.
    i had to reboot one of the machines to be able to reset it. Nothing was migrated when restarted the machines.
    Any ideas why this happened and what can be done to make sure it doesnt happen again?
    I was migrating my system applications only.

    just had a look on the apple store. Have found a converter. Will try this. Hopefully will work.
    Thanks for your contribution to this community

  • HT6147 my update seems to be stalled saying that there is less than one minute remaining but no progress is being made. any suggestions to resolve this problem

    My software update seems to be stalled saying that there is less than one minute remainig but no progress is being made.
    Any suggestions to resolve this problem

    Reset your device: hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss) Then try the update again.

  • 1 million row full table scan in less than one minute?

    All,
    a customer has a table which is around 1 million rows.
    The table size is 300 Mo.
    The customer wants to calculate regular arithmetic operations,
    and synthetic data on the whole table. He will use 'group by'
    statements and 'sort by'.
    He wants to know if it would be possible to get the results in
    less than one minute, and what would be the necessary
    architecture in order to achieve this?
    He currently has a 4 Gb Ram machine, 4 processors (I think...).
    It's a 7.3 database.
    Would an upgrade to 8i or 9i help? Would partitioning help?
    Would parallel query help? What else?
    There will be no other concurrent requests on the system.
    Thanks!

    Hi
    If you have four processors parallel query will increase speed
    of executing your statement. It will work better with
    partitions. In version 7.3 is not very easy to manage partitons
    because you have not partition tables - you have only partition
    views. Maybe the speed is the same but management of partition
    views is not so easy. So in version 8i and 9i it will be better.
    If you have index for group by columns and they are 'NOT NULL'
    it will be additional way of increasing speed beacause you will
    eleminate sort operation.
    Regards

Maybe you are looking for

  • Toshiba L500 Blue Screen crashes - Windows 7

    I have a Toshiba L500-1XJ, part no. PSLS0E-07D01DEN which crashes almost immediately on loading Windows 7. As it belonged to my son, who is now using another machine, I have restored the machine to its original state and still the machine crashes. Th

  • Bluetooth a2dp/avrcp

    Ever since a week after the first Iphones were released (when I bought my first one), I've been waiting for Iphone to support bluetooth a2dp/avrcp. I bought a 3G-S yesterday. I have 3 different a2dp/avrcp products I've paired it with: my Sony car ste

  • Need some advice - Newbie starting an advertising business..

    Hello, I am new to Indesign, having used quark previously. Basically i print and publish an advertisment magazine. I create these advertisements from scratch or in some cases from logos i am sent by the clients via email. I need to understand whether

  • Update CR in PSE 11

    How do I update camera raw in PSE 11 to 8.2, I currently have 7.4

  • My 13" MBP froze during the 10.8.5 update.

    My wife's computer has been running on 10.6 until I convinced her to let me update it to 10.8. I bought 10.8, installed it, and it ran fine. After it was done and the computer was set up, I checked for updates to install the latest version of everyth