IMac starts to black screen! Help!!!
iMac w/ Maverik OS starts up to black screen w/ mouse cursor. Put flashlight up to screen and still see nothing. Installed new Maverik OS using option + CMD + P+ R to no avail. Help!
Please carefully read and then methodically execute each of the steps in
http://support.apple.com/kb/ts2570
Similar Messages
-
IMAC start issues: black screen and required to enter EXIT.
At iMAC start I get black screen with Root directory and requested to enter EXIT to continue. This happens very frequently. Can somebody help me to solve this issue? Thanks
I would suggest booting from the Recovery partition, choosing Disk Utilities, then running Repair Disk and Repair Permissions. See if that clears this issue.
Others may have suggestions, but if the above doesn't work you may need to reinstall Mountain Lion...again, from the Recovery partition. -
Boot Camp: iMac displays a black screen during installation of Windows 7 - Apple Support
I have followed each of the steps listed in the link above with no success.
Prior to adding the extra drivers I was able to start the Windows install process up to reformatting the "Windows" Bootcamp drive. After that the computer would go through some instal processes and eventually restart. After the restart the screen would go black. The black screen lead me to the Apple Support link above dated March 5 2015. After going through steps listed in the link above, I get an error message stating that the D:\Sources\instal.win. file cannot be located. I am forced to restart the computer at that point and theWindows install process attempts to start again but always ends up at the same point.
Note: I am installing windows 7 Pro from a DVD. I scanned the AutoUnattend.xml file and noticed that it refers to "Windows 7 ULTIMATE" but not "Pro" or any others that I could see. (see below). Could that be part of the issue?
Any feedback would be greatly appreciated.
<cpi:offlineImage cpi:source="wim:d:/sources/install.wim#Windows 7 ULTIMATE" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
</unattend>
iMac (27-inch, Late 2009)
2.66 GHz Intel Core i5
16 GB 1067 MHz DDR3
ATI Radeon HD 4850 512 MBHere is an over-simplified explanation of WIM and CLG files. Assume your DVD Media contains
W7- Ultimate
W7- Professional
W7- Home Premium
W7- Home Basic
WIM Files
File1
y
y
y
y
File2
y
y
y
y
File3
y
File4
y
y
File4
y
y
y
The File .wim will contains a compressed image which contains File [1...5].
The W7-Ultimate .clg will have 5 entries, with all set to 'Y'.
The W7-Professional .clg will have 5 entries, with 'Y','Y','N','Y','Y'.
The W7-Home Premium .clg will have 5 entries, with 'Y','Y','N','N','Y'.
The W7-Home Basic .clg file will have 5 entries, with 'Y','Y','N','N','N'.
This allows a single .wim Image file on the DVD media to be used to install any of the 5 flavors of Windows. When you enter your product key, the Installer knows what specific W7 variant you have the key for and will tell the WIM to extract the specific files the installer needs to be extracted.
The following line
<cpi:offlineImage cpi:source="wim:d:/sources/install.wim#Windows 7 ULTIMATE" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
is telling that a retail product key will be entered, which should go look for this specific .clg file (from the five you already have on disk). You can test if it will work for you by changing this line to the following
<cpi:offlineImage cpi:source="wim:d:/sources/install.wim#Windows 7 PROFESSIONAL" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
If it does not work, the other issue can be related to device discovery. Typically A: and B: device names are reserved for Floppy Drives. C: is your internal HDD.
D: can either point to the Optical drive, or the USB. The normal convention is that the removable media is named from Z: backwards. Y: and Z: are usually used for Network drives, so X: should be your USB. First try with the change to "Professional". If it does not work, -
HT201177 cant turn on my imac just a black screen which i never shut down to begin with
help i walked in to find my imac with a black screen and i cant turn it back on has this happened to anyone else? how do i get it back on
You're sure the electrical socket it's attached to has power? That socket isn't controlled by a wall switch, which is off? If the socket is good, see this Apple note for systems that won't turn on.
-
IMac displays a black screen during installation of Windows 7
I tried to install windows 7 on my imac 27" but imac displays a black screen during installation of windows 7.
I also tried to install it as apples instruction of http://support.apple.com/kb/ts3173 but it failed.
Any solution please.. thanks
I have a late 27" imac with OS X 10.85Here is an over-simplified explanation of WIM and CLG files. Assume your DVD Media contains
W7- Ultimate
W7- Professional
W7- Home Premium
W7- Home Basic
WIM Files
File1
y
y
y
y
File2
y
y
y
y
File3
y
File4
y
y
File4
y
y
y
The File .wim will contains a compressed image which contains File [1...5].
The W7-Ultimate .clg will have 5 entries, with all set to 'Y'.
The W7-Professional .clg will have 5 entries, with 'Y','Y','N','Y','Y'.
The W7-Home Premium .clg will have 5 entries, with 'Y','Y','N','N','Y'.
The W7-Home Basic .clg file will have 5 entries, with 'Y','Y','N','N','N'.
This allows a single .wim Image file on the DVD media to be used to install any of the 5 flavors of Windows. When you enter your product key, the Installer knows what specific W7 variant you have the key for and will tell the WIM to extract the specific files the installer needs to be extracted.
The following line
<cpi:offlineImage cpi:source="wim:d:/sources/install.wim#Windows 7 ULTIMATE" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
is telling that a retail product key will be entered, which should go look for this specific .clg file (from the five you already have on disk). You can test if it will work for you by changing this line to the following
<cpi:offlineImage cpi:source="wim:d:/sources/install.wim#Windows 7 PROFESSIONAL" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
If it does not work, the other issue can be related to device discovery. Typically A: and B: device names are reserved for Floppy Drives. C: is your internal HDD.
D: can either point to the Optical drive, or the USB. The normal convention is that the removable media is named from Z: backwards. Y: and Z: are usually used for Network drives, so X: should be your USB. First try with the change to "Professional". If it does not work, -
Mac book pro was working normal but after shutdown I try to start but not start only black screen
My mac book pro was working normal , I shut down proper and I want to start again I press power button for start but not start , only black screen same on shut down position , so how can I start my mac book pro again
Try SMC and PRAM resets:
http://support.apple.com/kb/ht3964
http://support.apple.com/kb/ht1379
Ciao. -
Why does my imac get a black screen when switching on
why does my imac get a black screen when turning on, and logging in is very slow.
I would first reset the SMC:
Shut down and unplug the Mac.
Keep the Mac unplugged for at least fifteen seconds.
Plug the Mac back in and do not turn it back on for at least five seconds.
Press the power button to turn the Mac back on.
Then I would reset the PRAM by rebooting the iMac while simultaneously holding the Command-Option-P-R keys until the machine restarts a second time.
Let us know if these procedures don't solve the problems.
Hope this helps -
My ipod touch 4g wont turn on its on a black screen help
can some one help me please i need this ipod
I TRIED TO TURN IT ON BUT IT NEVER TURN ON
AND ITS ON A BLACK SCREEN
HELP FOR GOD SAKETry:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
IMac starts with fan, screen stays black
When attempting to start my iMac G5 (Ambient Light Sensor), fans come on but screen stays black. A couple minutes later, the fans rev up and run very quickly and loudly. This started happening when:
1. One day the screen showed a green question mark with a message indicating that the computer needed to be restarted in a box
2. Green lines were all across the screen
3. I forced it to shut down by holding down the power button
4. When I attempted to start it back up the fans started but the screen stayed black
5. After a couple of minutes, the fans revved up
This has been happening ever since. One time the computer started to the desktop but everything was frozen. I have reset the PMU, checked the diagnostic LEDs, reset the PRAM-basically everything suggested. Can anyone help? Thanks!Try the suggestions mentioned in the following Articles:
http://docs.info.apple.com/article.html?artnum=301283 Troubleshooting when there's no picture on the display
http://docs.info.apple.com/article.html?artnum=301733 iMac G5: How to Reset the SMU (iMac G5, the iMac G5 (Ambient Light Sensor), and the iMac G5 (iSight)).
Strongly recommend that you update to OS 10.4.11. Your system info confirms you are still using the basic Tiger OS. -
My imac has a black screen after I turn it on, help!!
After the latest system update, my imac froze. I turned it off holding down the power button. Now every time I try to the system on, a black screen appears and nothing else happens. What do I do?
Looks like the same thing just happened to my wife's 20"G5 iMac. After the most recent update she said the system crashed then on startup after about a minute of the spinning wheel the screen went black ... nothing happened. So after leaving it for 20minutes I shut it down by holding down the startup button on the back ... same thing, and again a further two times. So the issue wasn't a one off.
Then as I started to surf discussions to come up with a solution it came right by itself ... I don't know what it was. Maybe it just needed more than 20 minutes to set itself up. Or maybe it just needed a few prods to get it started.
Just thought I had better try a restart again to see if the problem was actually solved ... same thing happened. Now after about ten minutes after startup it comes back on ... weird. No time for doing a whole lot more than that at the moment. -
OS X Lion does not start. Black screen, please help me!
I have installed OS X Lion. I updated software (safari and itunes) and after it rebooted screen went black.
Now It does not start and only shows a black screen. What can I do?
When I turn it on, ventilator obviously starts but beyond that there is nothing to indicate that it is on....This may be a hardware failure, but there are a few things you can try.
First, disconnect all wired peripherals and try to boot in safe mode (shift key held down at startup.)
If that doesn't work, boot from your recovery partition (command-R at startup.) If you can do that, reinstall the Mac OS and try again.
If that doesn't work, reset the NVRAM and PRAM:
Resetting your Mac's PRAM and NVRAM
If none of that works, take the unit to an Apple Store for service. -
So, yesterday while playing a game of league of legends my Mac stopped running. After I resetted it, I got black screen after it the chime + loading bal.
So far I've tried:
CMD+R => black screen
Holding shift => black screen
Holding Alt => chosing the HR, the repair disk, or the original CD to reintsall => black screen
Holding S => got to the terminal, did the check up, it said it was ok, restarted => black screen
Took off the power cable, waiting at least 15 seconds, and everything back on => black screen
Holding Alt Cmd + p + R => black screen after restart
Removed 1 of the memories, then testen, same with the other one => black screen
I'm pretty much out of ideas at this point. Anything I've overlooked?Any white text?
Startup - Black Screen/White Text
Startup – Red Screen
Startup Issues - Resolve
Startup Issues - Resolve (2)
Startup Issues - Resolve (3)
Restart the computer holding down the command - option/alt - P - R keys before the grey screen appears. Continue to hold until you hear the startup chime for the second time.
Reset NVRAM/PRAM
Try a SMC reset. The article covers when this is required, but doing this will not affect anything.
Reset SMC -
20" imac gets random black screen and wont wake up.
O.K. this imac randomly goes to a black screen while your using it. It looks like it's asleep accept the light in the front doesn't pulse and it wont wake up.
If I hit the power button to put it to sleep I can then wake it up.
I tried resetting the SMU but have had no luck (not sure if it's even resetting seeing the date and time are still good) not sure why seeing resetting the SMU is a very simple processes.
It's a 20" intel imac 2GHz duo with system 10.4.11 (early 2006)
I was going to reinstall 10.4.11 to see if that helps and wanted to see if anyone else knows what to do. Its very random and seems to be getting worse, sometimes as soon as I get it fixed it goes black again. It usually only takes 15-30min after start up and doesn't matter if your using it or not.Hi all,
my first mac ever was also an Early 2006 20" iMac and it had the same symptons as yours late last year.
Tried all I could think of and then took it to an Apple Dealer here in Hamburg.
Turned it was the Power Supply Unit (both of them) and a repair (out of Applecare obviously) would have been in the range of about 500 Euros (material plus manhours).
So I decided to not get it repaired.
Regards
Stefan -
[SOLVED] GNOME starts into black screen, crashing after a minute.
This is happening after recently upgrading GNOME to 3.8 from 3.6. I attempted to downgrade, but it still refuses to start.
Here's the Xorg log.
[ 3050.246]
X.Org X Server 1.14.2
Release Date: 2013-06-25
[ 3050.246] X Protocol Version 11, Revision 0
[ 3050.246] Build Operating System: Linux 3.9.7-1-ARCH x86_64
[ 3050.246] Current Operating System: Linux dash 3.10.2-1-ARCH #1 SMP PREEMPT Mon Jul 22 08:47:24 CEST 2013 x86_64
[ 3050.246] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=5acc63bb-de83-4282-bc5e-f89b0c21e8be ro quiet
[ 3050.246] Build Date: 01 July 2013 10:48:42AM
[ 3050.246]
[ 3050.246] Current version of pixman: 0.30.0
[ 3050.247] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 3050.247] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 3050.247] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Jul 28 14:09:23 2013
[ 3050.247] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 3050.247] (==) No Layout section. Using the first Screen section.
[ 3050.247] (==) No screen section available. Using defaults.
[ 3050.247] (**) |-->Screen "Default Screen Section" (0)
[ 3050.247] (**) | |-->Monitor "<default monitor>"
[ 3050.247] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 3050.247] (==) Automatically adding devices
[ 3050.247] (==) Automatically enabling devices
[ 3050.247] (==) Automatically adding GPU devices
[ 3050.247] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 3050.247] Entry deleted from font path.
[ 3050.247] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 3050.247] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 3050.247] Entry deleted from font path.
[ 3050.247] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 3050.247] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/
[ 3050.247] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 3050.247] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 3050.247] (II) Loader magic: 0x7fdc20
[ 3050.247] (II) Module ABI versions:
[ 3050.247] X.Org ANSI C Emulation: 0.4
[ 3050.247] X.Org Video Driver: 14.1
[ 3050.247] X.Org XInput driver : 19.1
[ 3050.247] X.Org Server Extension : 7.0
[ 3050.248] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 3050.250] (--) PCI:*(0:0:2:0) 8086:0126:17aa:21db rev 9, Mem @ 0xf0000000/4194304, 0xe0000000/268435456, I/O @ 0x00005000/64
[ 3050.250] Initializing built-in extension Generic Event Extension
[ 3050.250] Initializing built-in extension SHAPE
[ 3050.250] Initializing built-in extension MIT-SHM
[ 3050.250] Initializing built-in extension XInputExtension
[ 3050.250] Initializing built-in extension XTEST
[ 3050.250] Initializing built-in extension BIG-REQUESTS
[ 3050.250] Initializing built-in extension SYNC
[ 3050.250] Initializing built-in extension XKEYBOARD
[ 3050.250] Initializing built-in extension XC-MISC
[ 3050.250] Initializing built-in extension SECURITY
[ 3050.250] Initializing built-in extension XINERAMA
[ 3050.250] Initializing built-in extension XFIXES
[ 3050.250] Initializing built-in extension RENDER
[ 3050.250] Initializing built-in extension RANDR
[ 3050.250] Initializing built-in extension COMPOSITE
[ 3050.250] Initializing built-in extension DAMAGE
[ 3050.250] Initializing built-in extension MIT-SCREEN-SAVER
[ 3050.250] Initializing built-in extension DOUBLE-BUFFER
[ 3050.250] Initializing built-in extension RECORD
[ 3050.250] Initializing built-in extension DPMS
[ 3050.250] Initializing built-in extension X-Resource
[ 3050.250] Initializing built-in extension XVideo
[ 3050.251] Initializing built-in extension XVideo-MotionCompensation
[ 3050.252] Initializing built-in extension XFree86-VidModeExtension
[ 3050.253] Initializing built-in extension XFree86-DGA
[ 3050.253] Initializing built-in extension XFree86-DRI
[ 3050.254] Initializing built-in extension DRI2
[ 3050.254] (II) LoadModule: "glx"
[ 3050.254] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 3050.254] (II) Module glx: vendor="X.Org Foundation"
[ 3050.254] compiled for 1.14.2, module version = 1.0.0
[ 3050.254] ABI class: X.Org Server Extension, version 7.0
[ 3050.254] (==) AIGLX enabled
[ 3050.255] Loading extension GLX
[ 3050.255] (==) Matched intel as autoconfigured driver 0
[ 3050.255] (==) Matched intel as autoconfigured driver 1
[ 3050.255] (==) Matched vesa as autoconfigured driver 2
[ 3050.255] (==) Matched modesetting as autoconfigured driver 3
[ 3050.255] (==) Matched fbdev as autoconfigured driver 4
[ 3050.255] (==) Assigned the driver to the xf86ConfigLayout
[ 3050.255] (II) LoadModule: "intel"
[ 3050.255] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 3050.255] (II) Module intel: vendor="X.Org Foundation"
[ 3050.255] compiled for 1.14.2, module version = 2.21.12
[ 3050.255] Module class: X.Org Video Driver
[ 3050.255] ABI class: X.Org Video Driver, version 14.1
[ 3050.255] (II) LoadModule: "vesa"
[ 3050.256] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 3050.256] (II) Module vesa: vendor="X.Org Foundation"
[ 3050.256] compiled for 1.14.0, module version = 2.3.2
[ 3050.256] Module class: X.Org Video Driver
[ 3050.256] ABI class: X.Org Video Driver, version 14.1
[ 3050.256] (II) LoadModule: "modesetting"
[ 3050.256] (WW) Warning, couldn't open module modesetting
[ 3050.256] (II) UnloadModule: "modesetting"
[ 3050.256] (II) Unloading modesetting
[ 3050.256] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 3050.256] (II) LoadModule: "fbdev"
[ 3050.256] (WW) Warning, couldn't open module fbdev
[ 3050.256] (II) UnloadModule: "fbdev"
[ 3050.256] (II) Unloading fbdev
[ 3050.256] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 3050.256] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2), HD Graphics, HD Graphics 4600,
Haswell Desktop (GT3), HD Graphics, HD Graphics 4600,
Haswell Mobile (GT3), HD Graphics, HD Graphics P4600/P4700,
Haswell Server (GT3), Haswell (GT1), Haswell (GT2), Haswell (GT3),
HD Graphics, Haswell (GT2), Haswell (GT3), Haswell SDV Desktop (GT1),
Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT3),
Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
Haswell SDV Mobile (GT3), Haswell SDV Server (GT1),
Haswell SDV Server (GT2), Haswell SDV Server (GT3),
Haswell SDV (GT1), Haswell SDV (GT2), Haswell SDV (GT3),
Haswell SDV (GT1), Haswell SDV (GT2), Haswell SDV (GT3),
Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
Iris(TM) Graphics 5100, HD Graphics, HD Graphics 4400,
HD Graphics 5000, Haswell ULT Server (GT1), Haswell ULT Server (GT2),
Iris(TM) Graphics 5100, Haswell ULT (GT1), Haswell ULT (GT2),
Iris(TM) Graphics 5100, HD Graphics, HD Graphics 4200,
Iris(TM) Graphics 5100, Haswell CRW Desktop (GT1), HD Graphics 4600,
Iris(TM) Pro Graphics 5200, Haswell CRW Mobile (GT1),
HD Graphics 4600, Iris(TM) Pro Graphics 5200,
Haswell CRW Server (GT1), Haswell CRW Server (GT2),
Iris(TM) Pro Graphics 5200, Haswell CRW (GT1), Haswell CRW (GT2),
Iris(TM) Pro Graphics 5200, Haswell CRW (GT1), Haswell CRW (GT2),
Iris(TM) Pro Graphics 5200, ValleyView PO board
[ 3050.257] (II) VESA: driver for VESA chipsets: vesa
[ 3050.257] (++) using VT number 3
[ 3050.257] (WW) Falling back to old probe method for vesa
[ 3050.257] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 3050.257] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 3050.257] (==) intel(0): RGB weight 888
[ 3050.257] (==) intel(0): Default visual is TrueColor
[ 3050.257] (--) intel(0): Integrated Graphics Chipset: Intel(R) Sandybridge Mobile (GT2+)
[ 3050.257] (**) intel(0): Relaxed fencing enabled
[ 3050.257] (**) intel(0): Wait on SwapBuffers? enabled
[ 3050.257] (**) intel(0): Triple buffering? enabled
[ 3050.257] (**) intel(0): Framebuffer tiled
[ 3050.257] (**) intel(0): Pixmaps tiled
[ 3050.257] (**) intel(0): 3D buffers tiled
[ 3050.257] (**) intel(0): SwapBuffers wait enabled
[ 3050.257] (==) intel(0): video overlay key set to 0x101fe
[ 3050.257] (II) intel(0): Output LVDS1 has no monitor section
[ 3050.257] (--) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[ 3050.259] (II) intel(0): Output VGA1 has no monitor section
[ 3050.283] (II) intel(0): Output HDMI1 has no monitor section
[ 3050.283] (II) intel(0): Output DP1 has no monitor section
[ 3050.283] (II) intel(0): Output HDMI2 has no monitor section
[ 3050.283] (II) intel(0): Output HDMI3 has no monitor section
[ 3050.284] (II) intel(0): Output DP2 has no monitor section
[ 3050.284] (II) intel(0): Output DP3 has no monitor section
[ 3050.284] (II) intel(0): EDID for output LVDS1
[ 3050.284] (II) intel(0): Manufacturer: LGD Model: 2d8 Serial#: 0
[ 3050.284] (II) intel(0): Year: 2012 Week: 0
[ 3050.284] (II) intel(0): EDID Version: 1.3
[ 3050.284] (II) intel(0): Digital Display Input
[ 3050.284] (II) intel(0): Max Image Size [cm]: horiz.: 28 vert.: 16
[ 3050.284] (II) intel(0): Gamma: 2.20
[ 3050.284] (II) intel(0): DPMS capabilities: StandBy Suspend Off
[ 3050.284] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 3050.284] (II) intel(0): First detailed timing is preferred mode
[ 3050.284] (II) intel(0): redX: 0.600 redY: 0.355 greenX: 0.334 greenY: 0.559
[ 3050.284] (II) intel(0): blueX: 0.149 blueY: 0.114 whiteX: 0.313 whiteY: 0.329
[ 3050.284] (II) intel(0): Manufacturer's mask: 0
[ 3050.284] (II) intel(0): Supported detailed timing:
[ 3050.284] (II) intel(0): clock: 75.2 MHz Image Size: 277 x 156 mm
[ 3050.284] (II) intel(0): h_active: 1366 h_sync: 1414 h_sync_end 1478 h_blank_end 1582 h_border: 0
[ 3050.284] (II) intel(0): v_active: 768 v_sync: 772 v_sync_end 779 v_blanking: 792 v_border: 0
[ 3050.284] (II) intel(0): LG Display
[ 3050.284] (II) intel(0): LP125WH2-SLB3
[ 3050.284] (II) intel(0): EDID (in hex):
[ 3050.284] (II) intel(0): 00ffffffffffff0030e4d80200000000
[ 3050.284] (II) intel(0): 00160103801c1078ea8855995b558f26
[ 3050.284] (II) intel(0): 1d505400000001010101010101010101
[ 3050.284] (II) intel(0): 010101010101601d56d8500018303040
[ 3050.284] (II) intel(0): 4700159c1000001b0000000000000000
[ 3050.284] (II) intel(0): 00000000000000000000000000fe004c
[ 3050.284] (II) intel(0): 4720446973706c61790a2020000000fe
[ 3050.284] (II) intel(0): 004c503132355748322d534c42330059
[ 3050.284] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 3050.284] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 3050.284] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 3050.284] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 3050.284] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 3050.284] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 3050.284] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 3050.284] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 3050.284] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 3050.284] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 3050.284] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 3050.284] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 3050.284] (II) intel(0): Printing probed modes for output LVDS1
[ 3050.284] (II) intel(0): Modeline "1366x768"x60.0 75.20 1366 1414 1478 1582 768 772 779 792 +hsync -vsync (47.5 kHz eP)
[ 3050.284] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 3050.284] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 3050.284] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 3050.284] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 3050.285] (II) intel(0): EDID for output VGA1
[ 3050.309] (II) intel(0): EDID for output HDMI1
[ 3050.309] (II) intel(0): EDID for output DP1
[ 3050.310] (II) intel(0): EDID for output HDMI2
[ 3050.310] (II) intel(0): EDID for output HDMI3
[ 3050.310] (II) intel(0): EDID for output DP2
[ 3050.310] (II) intel(0): EDID for output DP3
[ 3050.310] (II) intel(0): Output LVDS1 connected
[ 3050.310] (II) intel(0): Output VGA1 disconnected
[ 3050.310] (II) intel(0): Output HDMI1 disconnected
[ 3050.310] (II) intel(0): Output DP1 disconnected
[ 3050.310] (II) intel(0): Output HDMI2 disconnected
[ 3050.310] (II) intel(0): Output HDMI3 disconnected
[ 3050.310] (II) intel(0): Output DP2 disconnected
[ 3050.310] (II) intel(0): Output DP3 disconnected
[ 3050.310] (II) intel(0): Using exact sizes for initial modes
[ 3050.310] (II) intel(0): Output LVDS1 using initial mode 1366x768
[ 3050.310] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 3050.310] (II) intel(0): Kernel page flipping support detected, enabling
[ 3050.310] (==) intel(0): DPI set to (96, 96)
[ 3050.310] (II) Loading sub module "fb"
[ 3050.310] (II) LoadModule: "fb"
[ 3050.310] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 3050.310] (II) Module fb: vendor="X.Org Foundation"
[ 3050.310] compiled for 1.14.2, module version = 1.0.0
[ 3050.310] ABI class: X.Org ANSI C Emulation, version 0.4
[ 3050.310] (II) Loading sub module "dri2"
[ 3050.310] (II) LoadModule: "dri2"
[ 3050.310] (II) Module "dri2" already built-in
[ 3050.310] (II) UnloadModule: "vesa"
[ 3050.310] (II) Unloading vesa
[ 3050.310] (==) Depth 24 pixmap format is 32 bpp
[ 3050.310] (II) intel(0): [DRI2] Setup complete
[ 3050.310] (II) intel(0): [DRI2] DRI driver: i965
[ 3050.310] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
[ 3050.311] (II) UXA(0): Driver registered support for the following operations:
[ 3050.311] (II) solid
[ 3050.311] (II) copy
[ 3050.311] (II) composite (RENDER acceleration)
[ 3050.311] (II) put_image
[ 3050.311] (II) get_image
[ 3050.311] (==) intel(0): Backing store disabled
[ 3050.311] (==) intel(0): Silken mouse enabled
[ 3050.311] (II) intel(0): Initializing HW Cursor
[ 3050.311] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 3050.312] (==) intel(0): DPMS enabled
[ 3050.312] (==) intel(0): Intel XvMC decoder enabled
[ 3050.312] (II) intel(0): Set up textured video
[ 3050.312] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 3050.312] (II) intel(0): direct rendering: DRI2 Enabled
[ 3050.312] (==) intel(0): hotplug detection: "enabled"
[ 3050.336] (--) RandR disabled
[ 3050.346] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 3050.346] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 3050.346] (II) AIGLX: enabled GLX_ARB_create_context
[ 3050.346] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 3050.346] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 3050.346] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 3050.346] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 3050.346] (II) AIGLX: Loaded and initialized i965
[ 3050.346] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 3050.346] (II) intel(0): Setting screen physical size to 361 x 203
[ 3050.373] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 3050.373] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 3050.373] (II) LoadModule: "evdev"
[ 3050.373] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 3050.373] (II) Module evdev: vendor="X.Org Foundation"
[ 3050.373] compiled for 1.14.2, module version = 2.8.1
[ 3050.373] Module class: X.Org XInput Driver
[ 3050.373] ABI class: X.Org XInput driver, version 19.1
[ 3050.373] (II) Using input driver 'evdev' for 'Power Button'
[ 3050.373] (**) Power Button: always reports core events
[ 3050.373] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 3050.373] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 3050.373] (--) evdev: Power Button: Found keys
[ 3050.373] (II) evdev: Power Button: Configuring as keyboard
[ 3050.373] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 3050.373] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 3050.373] (**) Option "xkb_rules" "evdev"
[ 3050.373] (**) Option "xkb_model" "pc104"
[ 3050.373] (**) Option "xkb_layout" "us"
[ 3050.389] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 3050.389] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 3050.389] (II) Using input driver 'evdev' for 'Video Bus'
[ 3050.389] (**) Video Bus: always reports core events
[ 3050.389] (**) evdev: Video Bus: Device: "/dev/input/event4"
[ 3050.389] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 3050.389] (--) evdev: Video Bus: Found keys
[ 3050.389] (II) evdev: Video Bus: Configuring as keyboard
[ 3050.389] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4/event4"
[ 3050.389] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 3050.389] (**) Option "xkb_rules" "evdev"
[ 3050.389] (**) Option "xkb_model" "pc104"
[ 3050.389] (**) Option "xkb_layout" "us"
[ 3050.390] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 3050.390] (II) No input driver specified, ignoring this device.
[ 3050.390] (II) This device may have been added with another device file.
[ 3050.390] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 3050.390] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 3050.390] (II) Using input driver 'evdev' for 'Sleep Button'
[ 3050.390] (**) Sleep Button: always reports core events
[ 3050.390] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[ 3050.390] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 3050.390] (--) evdev: Sleep Button: Found keys
[ 3050.390] (II) evdev: Sleep Button: Configuring as keyboard
[ 3050.390] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2"
[ 3050.390] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 3050.390] (**) Option "xkb_rules" "evdev"
[ 3050.390] (**) Option "xkb_model" "pc104"
[ 3050.390] (**) Option "xkb_layout" "us"
[ 3050.390] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 3050.390] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
[ 3050.390] (II) No input driver specified, ignoring this device.
[ 3050.390] (II) This device may have been added with another device file.
[ 3050.390] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event10)
[ 3050.390] (II) No input driver specified, ignoring this device.
[ 3050.390] (II) This device may have been added with another device file.
[ 3050.391] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event8)
[ 3050.391] (II) No input driver specified, ignoring this device.
[ 3050.391] (II) This device may have been added with another device file.
[ 3050.391] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event9)
[ 3050.391] (II) No input driver specified, ignoring this device.
[ 3050.391] (II) This device may have been added with another device file.
[ 3050.391] (II) config/udev: Adding input device Wacom ISDv4 E6 Pen (/dev/input/event12)
[ 3050.391] (**) Wacom ISDv4 E6 Pen: Applying InputClass "evdev tablet catchall"
[ 3050.391] (II) Using input driver 'evdev' for 'Wacom ISDv4 E6 Pen'
[ 3050.391] (**) Wacom ISDv4 E6 Pen: always reports core events
[ 3050.391] (**) evdev: Wacom ISDv4 E6 Pen: Device: "/dev/input/event12"
[ 3050.391] (--) evdev: Wacom ISDv4 E6 Pen: Vendor 0x56a Product 0xe6
[ 3050.391] (--) evdev: Wacom ISDv4 E6 Pen: Found absolute axes
[ 3050.391] (--) evdev: Wacom ISDv4 E6 Pen: Found x and y absolute axes
[ 3050.391] (--) evdev: Wacom ISDv4 E6 Pen: Found absolute tablet.
[ 3050.391] (II) evdev: Wacom ISDv4 E6 Pen: Configuring as tablet
[ 3050.391] (**) evdev: Wacom ISDv4 E6 Pen: YAxisMapping: buttons 4 and 5
[ 3050.391] (**) evdev: Wacom ISDv4 E6 Pen: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 3050.391] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input12/event12"
[ 3050.391] (II) XINPUT: Adding extended input device "Wacom ISDv4 E6 Pen" (type: TABLET, id 9)
[ 3050.391] (II) evdev: Wacom ISDv4 E6 Pen: initialized for absolute axes.
[ 3050.391] (**) Wacom ISDv4 E6 Pen: (accel) keeping acceleration scheme 1
[ 3050.391] (**) Wacom ISDv4 E6 Pen: (accel) acceleration profile 0
[ 3050.391] (**) Wacom ISDv4 E6 Pen: (accel) acceleration factor: 2.000
[ 3050.391] (**) Wacom ISDv4 E6 Pen: (accel) acceleration threshold: 4
[ 3050.391] (II) config/udev: Adding input device Wacom ISDv4 E6 Pen (/dev/input/mouse1)
[ 3050.391] (II) No input driver specified, ignoring this device.
[ 3050.391] (II) This device may have been added with another device file.
[ 3050.392] (II) config/udev: Adding input device Wacom ISDv4 E6 Finger (/dev/input/event13)
[ 3050.392] (**) Wacom ISDv4 E6 Finger: Applying InputClass "evdev touchscreen catchall"
[ 3050.392] (II) Using input driver 'evdev' for 'Wacom ISDv4 E6 Finger'
[ 3050.392] (**) Wacom ISDv4 E6 Finger: always reports core events
[ 3050.392] (**) evdev: Wacom ISDv4 E6 Finger: Device: "/dev/input/event13"
[ 3050.392] (II) evdev: Wacom ISDv4 E6 Finger: Using mtdev for this device
[ 3050.392] (--) evdev: Wacom ISDv4 E6 Finger: Vendor 0x56a Product 0xe6
[ 3050.392] (--) evdev: Wacom ISDv4 E6 Finger: Found absolute axes
[ 3050.392] (--) evdev: Wacom ISDv4 E6 Finger: Found absolute multitouch axes
[ 3050.392] (II) evdev: Wacom ISDv4 E6 Finger: No buttons found, faking one.
[ 3050.392] (--) evdev: Wacom ISDv4 E6 Finger: Found x and y absolute axes
[ 3050.392] (--) evdev: Wacom ISDv4 E6 Finger: Found absolute touchscreen
[ 3050.392] (II) evdev: Wacom ISDv4 E6 Finger: Configuring as touchscreen
[ 3050.392] (**) evdev: Wacom ISDv4 E6 Finger: YAxisMapping: buttons 4 and 5
[ 3050.392] (**) evdev: Wacom ISDv4 E6 Finger: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 3050.392] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.1/input/input13/event13"
[ 3050.392] (II) XINPUT: Adding extended input device "Wacom ISDv4 E6 Finger" (type: TOUCHSCREEN, id 10)
[ 3050.392] (II) evdev: Wacom ISDv4 E6 Finger: initialized for absolute axes.
[ 3050.392] (**) Wacom ISDv4 E6 Finger: (accel) keeping acceleration scheme 1
[ 3050.392] (**) Wacom ISDv4 E6 Finger: (accel) acceleration profile 0
[ 3050.392] (**) Wacom ISDv4 E6 Finger: (accel) acceleration factor: 2.000
[ 3050.392] (**) Wacom ISDv4 E6 Finger: (accel) acceleration threshold: 4
[ 3050.392] (II) config/udev: Adding input device Wacom ISDv4 E6 Finger (/dev/input/mouse2)
[ 3050.392] (II) No input driver specified, ignoring this device.
[ 3050.392] (II) This device may have been added with another device file.
[ 3050.392] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 3050.392] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 3050.392] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 3050.392] (**) AT Translated Set 2 keyboard: always reports core events
[ 3050.392] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 3050.392] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 3050.392] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 3050.392] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 3050.392] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 3050.392] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[ 3050.392] (**) Option "xkb_rules" "evdev"
[ 3050.392] (**) Option "xkb_model" "pc104"
[ 3050.392] (**) Option "xkb_layout" "us"
[ 3050.393] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event11)
[ 3050.393] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 3050.393] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 3050.393] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 3050.393] (II) LoadModule: "synaptics"
[ 3050.393] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 3050.393] (II) Module synaptics: vendor="X.Org Foundation"
[ 3050.393] compiled for 1.14.1, module version = 1.7.1
[ 3050.393] Module class: X.Org XInput Driver
[ 3050.393] ABI class: X.Org XInput driver, version 19.1
[ 3050.393] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 3050.393] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 3050.393] (**) Option "Device" "/dev/input/event11"
[ 3050.483] (II) synaptics: SynPS/2 Synaptics TouchPad: found clickpad property
[ 3050.483] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472 (res 75)
[ 3050.483] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448 (res 129)
[ 3050.483] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 3050.483] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 3050.483] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left double triple
[ 3050.483] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 3050.483] (**) Option "TapButton1" "1"
[ 3050.483] (**) Option "TapButton2" "2"
[ 3050.483] (**) Option "TapButton3" "3"
[ 3050.483] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[ 3050.483] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 3050.483] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 3050.523] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input11/event11"
[ 3050.523] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
[ 3050.523] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 3050.523] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 3050.523] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.040
[ 3050.523] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 3050.523] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 3050.523] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 3050.523] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 3050.523] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 3050.523] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 3050.523] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 3050.523] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event14)
[ 3050.524] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
[ 3050.524] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint'
[ 3050.524] (**) TPPS/2 IBM TrackPoint: always reports core events
[ 3050.524] (**) evdev: TPPS/2 IBM TrackPoint: Device: "/dev/input/event14"
[ 3050.524] (--) evdev: TPPS/2 IBM TrackPoint: Vendor 0x2 Product 0xa
[ 3050.524] (--) evdev: TPPS/2 IBM TrackPoint: Found 3 mouse buttons
[ 3050.524] (--) evdev: TPPS/2 IBM TrackPoint: Found relative axes
[ 3050.524] (--) evdev: TPPS/2 IBM TrackPoint: Found x and y relative axes
[ 3050.524] (II) evdev: TPPS/2 IBM TrackPoint: Configuring as mouse
[ 3050.524] (**) evdev: TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
[ 3050.524] (**) evdev: TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 3050.524] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/serio2/input/input14/event14"
[ 3050.524] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 13)
[ 3050.524] (II) evdev: TPPS/2 IBM TrackPoint: initialized for relative axes.
[ 3050.524] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
[ 3050.524] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
[ 3050.524] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[ 3050.524] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[ 3050.524] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse3)
[ 3050.524] (II) No input driver specified, ignoring this device.
[ 3050.524] (II) This device may have been added with another device file.
[ 3050.524] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 3050.524] (II) No input driver specified, ignoring this device.
[ 3050.524] (II) This device may have been added with another device file.
[ 3050.524] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event5)
[ 3050.524] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
[ 3050.524] (II) Using input driver 'evdev' for 'ThinkPad Extra Buttons'
[ 3050.524] (**) ThinkPad Extra Buttons: always reports core events
[ 3050.524] (**) evdev: ThinkPad Extra Buttons: Device: "/dev/input/event5"
[ 3050.524] (--) evdev: ThinkPad Extra Buttons: Vendor 0x17aa Product 0x5054
[ 3050.524] (--) evdev: ThinkPad Extra Buttons: Found keys
[ 3050.524] (II) evdev: ThinkPad Extra Buttons: Configuring as keyboard
[ 3050.524] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input5/event5"
[ 3050.524] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 14)
[ 3050.524] (**) Option "xkb_rules" "evdev"
[ 3050.524] (**) Option "xkb_model" "pc104"
[ 3050.524] (**) Option "xkb_layout" "us"
[ 3050.673] (II) intel(0): EDID vendor "LGD", prod id 728
[ 3050.673] (II) intel(0): Printing DDC gathered Modelines:
[ 3050.673] (II) intel(0): Modeline "1366x768"x0.0 75.20 1366 1414 1478 1582 768 772 779 792 +hsync -vsync (47.5 kHz eP)
[ 3053.746] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 3057.566] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 3057.576] (II) intel(0): EDID vendor "LGD", prod id 728
[ 3057.576] (II) intel(0): Printing DDC gathered Modelines:
[ 3057.576] (II) intel(0): Modeline "1366x768"x0.0 75.20 1366 1414 1478 1582 768 772 779 792 +hsync -vsync (47.5 kHz eP)
[ 3057.604] (II) evdev: Wacom ISDv4 E6 Finger: Using mtdev for this device
[ 3057.604] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 3057.604] setversion 1.4 failed
[ 3059.233] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 3145.715] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 3145.719] (II) intel(0): EDID vendor "LGD", prod id 728
[ 3145.719] (II) intel(0): Printing DDC gathered Modelines:
[ 3145.719] (II) intel(0): Modeline "1366x768"x0.0 75.20 1366 1414 1478 1582 768 772 779 792 +hsync -vsync (47.5 kHz eP)
[ 3145.747] (II) evdev: Wacom ISDv4 E6 Finger: Using mtdev for this device
[ 3145.747] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 3148.360] (II) evdev: ThinkPad Extra Buttons: Close
[ 3148.360] (II) UnloadModule: "evdev"
[ 3148.360] (II) evdev: TPPS/2 IBM TrackPoint: Close
[ 3148.360] (II) UnloadModule: "evdev"
[ 3148.360] (II) UnloadModule: "synaptics"
[ 3148.360] (II) evdev: AT Translated Set 2 keyboard: Close
[ 3148.360] (II) UnloadModule: "evdev"
[ 3148.360] (II) evdev: Wacom ISDv4 E6 Finger: Close
[ 3148.360] (II) UnloadModule: "evdev"
[ 3148.360] (II) evdev: Wacom ISDv4 E6 Pen: Close
[ 3148.360] (II) UnloadModule: "evdev"
[ 3148.360] (II) evdev: Sleep Button: Close
[ 3148.360] (II) UnloadModule: "evdev"
[ 3148.360] (II) evdev: Video Bus: Close
[ 3148.360] (II) UnloadModule: "evdev"
[ 3148.360] (II) evdev: Power Button: Close
[ 3148.360] (II) UnloadModule: "evdev"
[ 3149.198] (EE) Server terminated successfully (0). Closing log file.
I'd appreciate any help I could get.
Last edited by erdi13 (2013-07-30 03:49:12)I tried entering GNOME with gdm.
Before gdm runs, it freezes at a black screen for about a minute, then flashes the "Oh No" screen. Afterward, it allows me to login. After logging in, it freezes on the grey background of gdm for another minute. Once it displays the "Oh No" screen, it takes me back to a black screen, repeating the cycle.
Also, I upgraded X11 at the same time as GNOME.
Edit: Here's a recent Xorg log, if it helps.
[ 23.867]
X.Org X Server 1.14.2
Release Date: 2013-06-25
[ 23.868] X Protocol Version 11, Revision 0
[ 23.868] Build Operating System: Linux 3.9.7-1-ARCH x86_64
[ 23.869] Current Operating System: Linux dash 3.10.2-1-ARCH #1 SMP PREEMPT Mon Jul 22 08:47:24 CEST 2013 x86_64
[ 23.869] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=5acc63bb-de83-4282-bc5e-f89b0c21e8be ro quiet
[ 23.870] Build Date: 01 July 2013 10:48:42AM
[ 23.870]
[ 23.871] Current version of pixman: 0.30.0
[ 23.872] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 23.872] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 23.874] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jul 29 16:06:24 2013
[ 23.876] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 23.878] (==) No Layout section. Using the first Screen section.
[ 23.878] (==) No screen section available. Using defaults.
[ 23.878] (**) |-->Screen "Default Screen Section" (0)
[ 23.878] (**) | |-->Monitor "<default monitor>"
[ 23.878] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 23.878] (**) | |-->Device "Intel Graphics"
[ 23.878] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 23.878] (==) Automatically adding devices
[ 23.878] (==) Automatically enabling devices
[ 23.878] (==) Automatically adding GPU devices
[ 23.885] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 23.886] Entry deleted from font path.
[ 23.886] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 23.886] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 23.886] Entry deleted from font path.
[ 23.886] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 23.886] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/
[ 23.886] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 23.886] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 23.886] (II) Loader magic: 0x7fdc20
[ 23.886] (II) Module ABI versions:
[ 23.886] X.Org ANSI C Emulation: 0.4
[ 23.886] X.Org Video Driver: 14.1
[ 23.886] X.Org XInput driver : 19.1
[ 23.886] X.Org Server Extension : 7.0
[ 23.886] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 23.888] (--) PCI:*(0:0:2:0) 8086:0126:17aa:21db rev 9, Mem @ 0xf0000000/4194304, 0xe0000000/268435456, I/O @ 0x00005000/64
[ 23.889] Initializing built-in extension Generic Event Extension
[ 23.890] Initializing built-in extension SHAPE
[ 23.890] Initializing built-in extension MIT-SHM
[ 23.891] Initializing built-in extension XInputExtension
[ 23.891] Initializing built-in extension XTEST
[ 23.892] Initializing built-in extension BIG-REQUESTS
[ 23.893] Initializing built-in extension SYNC
[ 23.893] Initializing built-in extension XKEYBOARD
[ 23.894] Initializing built-in extension XC-MISC
[ 23.895] Initializing built-in extension SECURITY
[ 23.895] Initializing built-in extension XINERAMA
[ 23.896] Initializing built-in extension XFIXES
[ 23.896] Initializing built-in extension RENDER
[ 23.897] Initializing built-in extension RANDR
[ 23.897] Initializing built-in extension COMPOSITE
[ 23.898] Initializing built-in extension DAMAGE
[ 23.899] Initializing built-in extension MIT-SCREEN-SAVER
[ 23.899] Initializing built-in extension DOUBLE-BUFFER
[ 23.900] Initializing built-in extension RECORD
[ 23.900] Initializing built-in extension DPMS
[ 23.901] Initializing built-in extension X-Resource
[ 23.901] Initializing built-in extension XVideo
[ 23.902] Initializing built-in extension XVideo-MotionCompensation
[ 23.903] Initializing built-in extension XFree86-VidModeExtension
[ 23.903] Initializing built-in extension XFree86-DGA
[ 23.904] Initializing built-in extension XFree86-DRI
[ 23.904] Initializing built-in extension DRI2
[ 23.904] (II) LoadModule: "glx"
[ 23.905] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 23.909] (II) Module glx: vendor="X.Org Foundation"
[ 23.909] compiled for 1.14.2, module version = 1.0.0
[ 23.909] ABI class: X.Org Server Extension, version 7.0
[ 23.909] (==) AIGLX enabled
[ 23.910] Loading extension GLX
[ 23.910] (II) LoadModule: "intel"
[ 23.910] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 23.916] (II) Module intel: vendor="X.Org Foundation"
[ 23.916] compiled for 1.14.2, module version = 2.21.12
[ 23.916] Module class: X.Org Video Driver
[ 23.916] ABI class: X.Org Video Driver, version 14.1
[ 23.916] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2), HD Graphics, HD Graphics 4600,
Haswell Desktop (GT3), HD Graphics, HD Graphics 4600,
Haswell Mobile (GT3), HD Graphics, HD Graphics P4600/P4700,
Haswell Server (GT3), Haswell (GT1), Haswell (GT2), Haswell (GT3),
HD Graphics, Haswell (GT2), Haswell (GT3), Haswell SDV Desktop (GT1),
Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT3),
Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
Haswell SDV Mobile (GT3), Haswell SDV Server (GT1),
Haswell SDV Server (GT2), Haswell SDV Server (GT3),
Haswell SDV (GT1), Haswell SDV (GT2), Haswell SDV (GT3),
Haswell SDV (GT1), Haswell SDV (GT2), Haswell SDV (GT3),
Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
Iris(TM) Graphics 5100, HD Graphics, HD Graphics 4400,
HD Graphics 5000, Haswell ULT Server (GT1), Haswell ULT Server (GT2),
Iris(TM) Graphics 5100, Haswell ULT (GT1), Haswell ULT (GT2),
Iris(TM) Graphics 5100, HD Graphics, HD Graphics 4200,
Iris(TM) Graphics 5100, Haswell CRW Desktop (GT1), HD Graphics 4600,
Iris(TM) Pro Graphics 5200, Haswell CRW Mobile (GT1),
HD Graphics 4600, Iris(TM) Pro Graphics 5200,
Haswell CRW Server (GT1), Haswell CRW Server (GT2),
Iris(TM) Pro Graphics 5200, Haswell CRW (GT1), Haswell CRW (GT2),
Iris(TM) Pro Graphics 5200, Haswell CRW (GT1), Haswell CRW (GT2),
Iris(TM) Pro Graphics 5200, ValleyView PO board
[ 23.917] (++) using VT number 1
[ 23.920] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 23.920] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 23.920] (==) intel(0): RGB weight 888
[ 23.920] (==) intel(0): Default visual is TrueColor
[ 23.920] (**) intel(0): Option "AccelMethod" "sna"
[ 23.920] (--) intel(0): Integrated Graphics Chipset: Intel(R) Sandybridge Mobile (GT2+)
[ 23.920] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx
[ 23.920] (**) intel(0): Framebuffer tiled
[ 23.920] (**) intel(0): Pixmaps tiled
[ 23.920] (**) intel(0): "Tear free" disabled
[ 23.920] (**) intel(0): Forcing per-crtc-pixmaps? no
[ 23.920] (II) intel(0): Output LVDS1 has no monitor section
[ 23.920] (--) intel(0): found backlight control interface acpi_video0 (type 'firmware')
[ 23.920] (II) intel(0): Output VGA1 has no monitor section
[ 23.920] (II) intel(0): Output HDMI1 has no monitor section
[ 23.920] (II) intel(0): Output DP1 has no monitor section
[ 23.920] (II) intel(0): Output HDMI2 has no monitor section
[ 23.920] (II) intel(0): Output HDMI3 has no monitor section
[ 23.920] (II) intel(0): Output DP2 has no monitor section
[ 23.920] (II) intel(0): Output DP3 has no monitor section
[ 23.920] (II) intel(0): Output LVDS1 using initial mode 1366x768 on pipe 0
[ 23.920] (==) intel(0): DPI set to (96, 96)
[ 23.920] (II) Loading sub module "dri2"
[ 23.920] (II) LoadModule: "dri2"
[ 23.920] (II) Module "dri2" already built-in
[ 23.920] (==) Depth 24 pixmap format is 32 bpp
[ 23.926] (II) intel(0): SNA initialized with Sandybridge (gen6, gt2) backend
[ 23.926] (==) intel(0): Backing store disabled
[ 23.926] (==) intel(0): Silken mouse enabled
[ 23.926] (II) intel(0): HW Cursor enabled
[ 23.926] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 23.928] (==) intel(0): DPMS enabled
[ 23.928] (II) intel(0): [DRI2] Setup complete
[ 23.928] (II) intel(0): [DRI2] DRI driver: i965
[ 23.928] (II) intel(0): direct rendering: DRI2 Enabled
[ 23.928] (==) intel(0): hotplug detection: "enabled"
[ 23.929] (--) RandR disabled
[ 23.956] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 23.956] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 23.956] (II) AIGLX: enabled GLX_ARB_create_context
[ 23.956] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 23.956] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 23.956] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 23.956] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 23.956] (II) AIGLX: Loaded and initialized i965
[ 23.956] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 23.958] (II) intel(0): switch to mode 1366x768 on pipe 0 using LVDS1
[ 23.980] (II) intel(0): Setting screen physical size to 361 x 203
[ 24.028] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 24.028] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 24.028] (II) LoadModule: "evdev"
[ 24.028] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 24.031] (II) Module evdev: vendor="X.Org Foundation"
[ 24.031] compiled for 1.14.2, module version = 2.8.1
[ 24.031] Module class: X.Org XInput Driver
[ 24.031] ABI class: X.Org XInput driver, version 19.1
[ 24.031] (II) Using input driver 'evdev' for 'Power Button'
[ 24.031] (**) Power Button: always reports core events
[ 24.031] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 24.031] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 24.031] (--) evdev: Power Button: Found keys
[ 24.031] (II) evdev: Power Button: Configuring as keyboard
[ 24.031] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 24.031] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 24.031] (**) Option "xkb_rules" "evdev"
[ 24.031] (**) Option "xkb_model" "pc104"
[ 24.031] (**) Option "xkb_layout" "us"
[ 24.045] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 24.045] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 24.045] (II) Using input driver 'evdev' for 'Video Bus'
[ 24.045] (**) Video Bus: always reports core events
[ 24.045] (**) evdev: Video Bus: Device: "/dev/input/event4"
[ 24.045] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 24.045] (--) evdev: Video Bus: Found keys
[ 24.045] (II) evdev: Video Bus: Configuring as keyboard
[ 24.045] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4/event4"
[ 24.045] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 24.045] (**) Option "xkb_rules" "evdev"
[ 24.045] (**) Option "xkb_model" "pc104"
[ 24.045] (**) Option "xkb_layout" "us"
[ 24.046] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 24.046] (II) No input driver specified, ignoring this device.
[ 24.046] (II) This device may have been added with another device file.
[ 24.046] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 24.046] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 24.046] (II) Using input driver 'evdev' for 'Sleep Button'
[ 24.046] (**) Sleep Button: always reports core events
[ 24.046] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[ 24.046] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 24.046] (--) evdev: Sleep Button: Found keys
[ 24.046] (II) evdev: Sleep Button: Configuring as keyboard
[ 24.046] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2"
[ 24.046] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 24.046] (**) Option "xkb_rules" "evdev"
[ 24.046] (**) Option "xkb_model" "pc104"
[ 24.046] (**) Option "xkb_layout" "us"
[ 24.046] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 24.046] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
[ 24.046] (II) No input driver specified, ignoring this device.
[ 24.046] (II) This device may have been added with another device file.
[ 24.046] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event10)
[ 24.046] (II) No input driver specified, ignoring this device.
[ 24.046] (II) This device may have been added with another device file.
[ 24.047] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event8)
[ 24.047] (II) No input driver specified, ignoring this device.
[ 24.047] (II) This device may have been added with another device file.
[ 24.047] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event9)
[ 24.047] (II) No input driver specified, ignoring this device.
[ 24.047] (II) This device may have been added with another device file.
[ 24.047] (II) config/udev: Adding input device Wacom ISDv4 E6 Pen (/dev/input/event12)
[ 24.047] (**) Wacom ISDv4 E6 Pen: Applying InputClass "evdev tablet catchall"
[ 24.047] (II) Using input driver 'evdev' for 'Wacom ISDv4 E6 Pen'
[ 24.047] (**) Wacom ISDv4 E6 Pen: always reports core events
[ 24.047] (**) evdev: Wacom ISDv4 E6 Pen: Device: "/dev/input/event12"
[ 24.047] (--) evdev: Wacom ISDv4 E6 Pen: Vendor 0x56a Product 0xe6
[ 24.047] (--) evdev: Wacom ISDv4 E6 Pen: Found absolute axes
[ 24.047] (--) evdev: Wacom ISDv4 E6 Pen: Found x and y absolute axes
[ 24.047] (--) evdev: Wacom ISDv4 E6 Pen: Found absolute tablet.
[ 24.047] (II) evdev: Wacom ISDv4 E6 Pen: Configuring as tablet
[ 24.047] (**) evdev: Wacom ISDv4 E6 Pen: YAxisMapping: buttons 4 and 5
[ 24.047] (**) evdev: Wacom ISDv4 E6 Pen: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 24.047] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input12/event12"
[ 24.047] (II) XINPUT: Adding extended input device "Wacom ISDv4 E6 Pen" (type: TABLET, id 9)
[ 24.047] (II) evdev: Wacom ISDv4 E6 Pen: initialized for absolute axes.
[ 24.047] (**) Wacom ISDv4 E6 Pen: (accel) keeping acceleration scheme 1
[ 24.047] (**) Wacom ISDv4 E6 Pen: (accel) acceleration profile 0
[ 24.047] (**) Wacom ISDv4 E6 Pen: (accel) acceleration factor: 2.000
[ 24.047] (**) Wacom ISDv4 E6 Pen: (accel) acceleration threshold: 4
[ 24.047] (II) config/udev: Adding input device Wacom ISDv4 E6 Pen (/dev/input/mouse1)
[ 24.047] (II) No input driver specified, ignoring this device.
[ 24.047] (II) This device may have been added with another device file.
[ 24.047] (II) config/udev: Adding input device Wacom ISDv4 E6 Finger (/dev/input/event13)
[ 24.047] (**) Wacom ISDv4 E6 Finger: Applying InputClass "evdev touchscreen catchall"
[ 24.047] (II) Using input driver 'evdev' for 'Wacom ISDv4 E6 Finger'
[ 24.047] (**) Wacom ISDv4 E6 Finger: always reports core events
[ 24.047] (**) evdev: Wacom ISDv4 E6 Finger: Device: "/dev/input/event13"
[ 24.047] (II) evdev: Wacom ISDv4 E6 Finger: Using mtdev for this device
[ 24.047] (--) evdev: Wacom ISDv4 E6 Finger: Vendor 0x56a Product 0xe6
[ 24.047] (--) evdev: Wacom ISDv4 E6 Finger: Found absolute axes
[ 24.047] (--) evdev: Wacom ISDv4 E6 Finger: Found absolute multitouch axes
[ 24.047] (II) evdev: Wacom ISDv4 E6 Finger: No buttons found, faking one.
[ 24.047] (--) evdev: Wacom ISDv4 E6 Finger: Found x and y absolute axes
[ 24.047] (--) evdev: Wacom ISDv4 E6 Finger: Found absolute touchscreen
[ 24.048] (II) evdev: Wacom ISDv4 E6 Finger: Configuring as touchscreen
[ 24.048] (**) evdev: Wacom ISDv4 E6 Finger: YAxisMapping: buttons 4 and 5
[ 24.048] (**) evdev: Wacom ISDv4 E6 Finger: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 24.048] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.1/input/input13/event13"
[ 24.048] (II) XINPUT: Adding extended input device "Wacom ISDv4 E6 Finger" (type: TOUCHSCREEN, id 10)
[ 24.048] (II) evdev: Wacom ISDv4 E6 Finger: initialized for absolute axes.
[ 24.048] (**) Wacom ISDv4 E6 Finger: (accel) keeping acceleration scheme 1
[ 24.048] (**) Wacom ISDv4 E6 Finger: (accel) acceleration profile 0
[ 24.048] (**) Wacom ISDv4 E6 Finger: (accel) acceleration factor: 2.000
[ 24.048] (**) Wacom ISDv4 E6 Finger: (accel) acceleration threshold: 4
[ 24.048] (II) config/udev: Adding input device Wacom ISDv4 E6 Finger (/dev/input/mouse2)
[ 24.048] (II) No input driver specified, ignoring this device.
[ 24.048] (II) This device may have been added with another device file.
[ 24.048] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 24.048] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 24.048] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 24.048] (**) AT Translated Set 2 keyboard: always reports core events
[ 24.048] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 24.048] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 24.048] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 24.048] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 24.048] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 24.048] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[ 24.048] (**) Option "xkb_rules" "evdev"
[ 24.048] (**) Option "xkb_model" "pc104"
[ 24.048] (**) Option "xkb_layout" "us"
[ 24.048] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event11)
[ 24.048] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 24.048] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 24.048] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 24.048] (II) LoadModule: "synaptics"
[ 24.048] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 24.050] (II) Module synaptics: vendor="X.Org Foundation"
[ 24.050] compiled for 1.14.1, module version = 1.7.1
[ 24.050] Module class: X.Org XInput Driver
[ 24.050] ABI class: X.Org XInput driver, version 19.1
[ 24.050] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 24.050] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 24.050] (**) Option "Device" "/dev/input/event11"
[ 24.148] (II) synaptics: SynPS/2 Synaptics TouchPad: found clickpad property
[ 24.148] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472 (res 75)
[ 24.148] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448 (res 129)
[ 24.148] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 24.148] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 24.148] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left double triple
[ 24.148] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 24.148] (**) Option "TapButton1" "1"
[ 24.148] (**) Option "TapButton2" "2"
[ 24.148] (**) Option "TapButton3" "3"
[ 24.148] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[ 24.148] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 24.148] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 24.188] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input11/event11"
[ 24.188] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
[ 24.188] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 24.188] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 24.188] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.040
[ 24.188] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 24.188] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 24.188] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 24.188] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 24.188] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 24.189] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 24.189] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 24.189] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event14)
[ 24.189] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
[ 24.189] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint'
[ 24.189] (**) TPPS/2 IBM TrackPoint: always reports core events
[ 24.189] (**) evdev: TPPS/2 IBM TrackPoint: Device: "/dev/input/event14"
[ 24.189] (--) evdev: TPPS/2 IBM TrackPoint: Vendor 0x2 Product 0xa
[ 24.189] (--) evdev: TPPS/2 IBM TrackPoint: Found 3 mouse buttons
[ 24.189] (--) evdev: TPPS/2 IBM TrackPoint: Found relative axes
[ 24.189] (--) evdev: TPPS/2 IBM TrackPoint: Found x and y relative axes
[ 24.189] (II) evdev: TPPS/2 IBM TrackPoint: Configuring as mouse
[ 24.189] (**) evdev: TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
[ 24.189] (**) evdev: TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 24.189] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/serio2/input/input14/event14"
[ 24.189] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 13)
[ 24.189] (II) evdev: TPPS/2 IBM TrackPoint: initialized for relative axes.
[ 24.190] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
[ 24.190] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
[ 24.190] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[ 24.190] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[ 24.190] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse3)
[ 24.190] (II) No input driver specified, ignoring this device.
[ 24.190] (II) This device may have been added with another device file.
[ 24.190] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 24.191] (II) No input driver specified, ignoring this device.
[ 24.191] (II) This device may have been added with another device file.
[ 24.191] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event5)
[ 24.191] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
[ 24.191] (II) Using input driver 'evdev' for 'ThinkPad Extra Buttons'
[ 24.191] (**) ThinkPad Extra Buttons: always reports core events
[ 24.191] (**) evdev: ThinkPad Extra Buttons: Device: "/dev/input/event5"
[ 24.191] (--) evdev: ThinkPad Extra Buttons: Vendor 0x17aa Product 0x5054
[ 24.191] (--) evdev: ThinkPad Extra Buttons: Found keys
[ 24.191] (II) evdev: ThinkPad Extra Buttons: Configuring as keyboard
[ 24.191] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input5/event5"
[ 24.191] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 14)
[ 24.191] (**) Option "xkb_rules" "evdev"
[ 24.191] (**) Option "xkb_model" "pc104"
[ 24.191] (**) Option "xkb_layout" "us"
[ 24.612] (II) intel(0): EDID vendor "LGD", prod id 728
[ 24.612] (II) intel(0): Printing DDC gathered Modelines:
[ 24.612] (II) intel(0): Modeline "1366x768"x0.0 75.20 1366 1414 1478 1582 768 772 779 792 +hsync -vsync (47.5 kHz eP)
[ 178.286] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 289.940] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 289.940] (II) intel(0): switch to mode 1366x768 on pipe 0 using LVDS1
[ 289.974] (II) evdev: Wacom ISDv4 E6 Finger: Using mtdev for this device
[ 289.974] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 289.974] setversion 1.4 failed
[ 291.433] (II) AIGLX: Suspending AIGLX clients for VT switch
Last edited by erdi13 (2013-07-29 20:19:11) -
Installing Win 7 via Bootcamp on 27' iMac 2010 gives BLACK screen, BLINKING cursor error (BSBCE)?
Hi All,
All coments appreciated regarding thiis issue.
I have a 2010 27' i7 2.93Ghz iMac with 8Gb ram, 2Tb Seagate, and 256 Samsung SSD.
I am running 10.6.8 with all updates on the 2Tb Seagate (has BC 3.04), and 10.7.1 on the Samsung (has BC 4.0).
I have tried over a dozen times to install Win 7 (both a 32 bit Professional edition and a 64 bit Ultimate edition) on BC partitions on both drives. These have been all on separate occasions of course.
All installs result in what appears to be a successful install, but when the machine reboots to launch Win 7 for the first time, I ALWAYS get a black screen with a blinking cursor error (BSBCE).
This is not the 2009 video card driver issue problem reported so widely and referred to in the Apple article TS3173. I had that model previously and the way around that was to connect a second monitor/LCD for the installation.
No this is a new and separate issue.
And I am no nubie. I have used IT for over 25 years and teach networking courses in the Win and Mac environments.
The problem appears to be in a corrupt boot loader install.
I have used both WIn 7 install disks to do a repair each time. The repair says it is successful but after rebooting all I get is the black screen and flashing cursor, with no keyboard response. I have used both Bluetooth keyboards and USB keyboards. Nothing seems to make a difference re getting WIn 7 to boot after the install on either drive.
I have also used the Bootrec commands in the command window. They all return a successful outcome but when rebooting I see the ever familar BSBCE.
Now,,,,,here is the real puzzle. I copied my previous Win 7 Ultimate install using Winclone before I sold my older 27' iMac.
If I restore that install to the 2010 iMac Win 7 boots fine!
So some error is happening on my current machine when the bootloader/bootmanager is being written to the BC partition.
The problem is there with the BC on both 10.6 and 10.7, and these are different versions of BC!
Now to further complicate the problem, I manage 12X 2011 21.5' iMacs in a lab at work. Win 7 Professional 32bit installed on these machines just as it should (same disks that produces the black screen flashing cursor).
I have read that some people thing it is a Boot Rom version issue, and there may be some substance to this as WIN 7 installs so easily on the 2011 iMacs in my lab.
I called Applecare about this and went through the procedures outlined above. The guy was very helpful and sympathetic but he had no answer to the problem. His suggestion was to pull the SSD out and do it again with only one drive. As the machine can ship from Apple with both of these drives I really do doubt that pulling the SSD would make a difference.
Mac OS 10.6 and 10.7 work fine, no problems on both drives, so I don't think it is a drive issue.
OK Mac gurus...over to you.I have a bookmark for iMac w/ SSD and hard drive.
There is also the 'req'd reading' in http://www.apple.com/support/bootcamp
with one article on Black screen w/ iMac 2010.
Maybe you are looking for
-
Workflow Purchase order release
Hi, I want to activate workflow for purchase order released. Requirement is when first level releasaed the purchae order, it should mail to second level. I have done following settings in the system. In the SPRO - Release Procedure PO - Workflow, I h
-
Export and import UTF8 data between different databases
Hi, I want to know how to do the following: export data from database 1 and then import the data to database 2 I export user, without grants, with table data, without compress extents database 1: machine: SunOS 5.8 Generic_108528-14 sun4u sparc SUNW,
-
I have iweb "08. I want to delete the beige boxes on my website left from Google ADsense. I have deleted all code in Iweb SEO Tool that relates to the widgets but these boxes are still on my page. Please see at www.gilreathdecorativefinishes.com. I
-
What should I upgrade my mac x 10.5.8 software to?
In order to do many thing including installing programs, syncing my iphone ect, I need to upgrade my software. I have a very old mac with X 10.5.8 and am not a technological genius to say the least. I know I need to upgrade my software to at least 10
-
I have CFMX7 application serber and it connected to Oracle 9i, there is 3 database links on this DB server. On my code, i have query to select union data from 3 database links. I define the timeout requests setting to be 15 seconds to terminate long