IMac Time Capsule OK, Macbook Air Time Capsule Very Slow, both 10.9.5

I am struggling for more than a week trying to find an answer, but failed, hope someone can help me out
It seems after I upgraded to 10.9.5, a message on my Macbook appeared that I believe advised me to do a new full back-up on my Time Capsule. I did, it was slow, few MB after 1 hour or so, so I cancelled it. Whatever I tried, it remains a problem, I am now backing up 180GB to a 2TB Time Capsule, and it is at 53GB after 10 hours, now running at about 1GB/3 hours. My iMac, also on 10.9.5, connected to the very same Time Capsule on the same network runs smoothly, backing up 850GB in 8 hours or so.
What I have done so far, that did not help:
- Reformatted my Time Capsule completely,
- Run Disk Utility on Macbook, Repair Disk permission, Repair Disk.
- After Repair Disk Permissions it completes OK, but when I immediately run it again if finds the same problems, which it says have been corrected, see screenshot
- Disconnected my iMac from the network, sticked the very same network cable in my MacBook, ran Time Machine again, no difference
My set up:
1x Macbook Air, mid 2002, 250GB of which 70GB free space, 10.9.5, no anti-virus, clean-up apps etc
1x iMac, beginning 2009, 1TB of which 150GB free space, 10.9.5, no anti-virus, clean-up apps etc
1x Time Capsule 2TB, running latest firmware 7.6.4
All networked to the same network, no wireless connections
Prior to 10.9.5 I did not have this problem. I am pretty much lost. Anybody?

USB to ethernet has never been great.. although why it is worse with 10.9.5 is typical quality of apple upgrades these days.
7GB/hr sure aint fast.. it will go fairly slowly over the small files but should speed up on the larger ones.
I would take another step.. since you have come this far..
Check your wireless link speed. Depending on the age of the TC (yours in gen4) and the air.. you link speed should show 450mbps in the wifi on the mac.
Check it now..
Transmit rate should show 450.. you might need to setup close to the TC to get it.
But I achieve that by setting different names for the two bands.. TC24ghz and TC5ghz.
By default my mac will choose 2.4ghz .. because it is based on the best signal not the best speed. On 2.4ghz it can achieve 217Mbps max. Usually it will drop to 130. So by using a different name I can force the connection to the highest speed.
As you can probably tell.. IMHO using auto for everything is a great way to get things to work.. but how well they work is optimised by a committee.
Setting all the factors myself I set what I want and produce a racehorse instead of a camel.
(It is a typical joke.. camel is a horse designed by a committee!!).

Similar Messages

My macbook air is running very slow

Gday @Lexchellings
Would love to hear your opinion.
Hardware Information:
    MacBook Air (13-inch, Mid 2011)
    MacBook Air - model: MacBookAir4,2
    1 1.7 GHz Intel Core i5 CPU: 2 cores
    4 GB RAM
Video Information:
    Intel HD Graphics 3000 - VRAM: 384 MB
System Software:
    Mac OS X 10.7.5 (11G63) - Uptime: 2 days 2:31:27
Disk Information:
    APPLE SSD SM128C disk0 : (121.33 GB)
        disk0s1 (disk0s1) <not mounted>: 209.7 MB
        Macintosh HD (disk0s2) / [Startup]: 120.47 GB (33.1 GB free)
        Recovery HD (disk0s3) <not mounted>: 650 MB
USB Information:
    Apple Inc. FaceTime Camera (Built-in)
    Apple Inc. Apple Internal Keyboard / Trackpad
    Apple Inc. BRCM20702 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Internal Memory Card Reader
FireWire Information:
Thunderbolt Information:
    Apple, Inc. MacBook Air
Configuration files:
    /etc/hosts - Count: 16
Kernel Extensions:
    at.obdev.nke.LittleSnitch    (4052 - SDK 10.8)
Launch Daemons:
    [System]    at.obdev.littlesnitchd.plist 3rd-Party support link
    [System]    com.adobe.fpsaud.plist 3rd-Party support link
    [System]    com.adobe.SwitchBoard.plist 3rd-Party support link
    [System]    com.google.keystone.daemon.plist 3rd-Party support link
    [System]    com.macpaw.CleanMyMac2.Agent.plist 3rd-Party support link
    [System]    com.microsoft.office.licensing.helper.plist 3rd-Party support link
    [System]    com.wdc.WDDMservice.plist 3rd-Party support link
    [System]    com.WesternDigital.WDSmartWareD.plist 3rd-Party support link
Launch Agents:
    [System]    at.obdev.LittleSnitchUIAgent.plist 3rd-Party support link
    [System]    com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
    [System]    com.adobe.CS5ServiceManager.plist 3rd-Party support link
    [System]    com.google.keystone.agent.plist 3rd-Party support link
    [System]    com.sierrawireless.SwitchTool.plist 3rd-Party support link
User Launch Agents:
    [not loaded]    com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
    [not loaded]    com.adobe.ARM.[...].plist 3rd-Party support link
    [not loaded]    com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist
    [not loaded]    com.divx.agent.postinstall.plist 3rd-Party support link
    [not loaded]    com.facebook.videochat.[redacted].plist 3rd-Party support link
    [not loaded]    com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist 3rd-Party support link
    [not loaded]    com.macpaw.CleanMyMac2Helper.scheduledScan.plist 3rd-Party support link
    [not loaded]    com.macpaw.CleanMyMac2Helper.trashWatcher.plist 3rd-Party support link
    [not loaded]    com.spotify.webhelper.plist 3rd-Party support link
User Login Items:
    iTunesHelper
    uTorrent
    Google Drive
    Matrox PowerDesk
    Safari
    Dropbox
    Spotify
    AdobeResourceSynchronizer
    Google Chrome
Internet Plug-ins:
    o1dbrowserplugin: Version: 5.2.4.18058 3rd-Party support link
    OVSHelper: Version: 1.1 3rd-Party support link
    AdobePDFViewerNPAPI: Version: 11.0.06 - SDK 10.6 3rd-Party support link
    FlashPlayer-10.6: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
    DivXBrowserPlugin: Version: 2.2 3rd-Party support link
    Silverlight: Version: 5.1.10411.0 - SDK 10.6 3rd-Party support link
    Flash Player: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
    QuickTime Plugin: Version: 7.7.1
    googletalkbrowserplugin: Version: 5.2.4.18058 3rd-Party support link
    SharePointBrowserPlugin: Version: 14.1.4 - SDK 10.6 3rd-Party support link
    AdobePDFViewer: Version: 11.0.06 - SDK 10.6 3rd-Party support link
    JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Outdated! Update
Safari Extensions:
    Tab Reloader: Version: 1.0
    DivX Plus Web Player HTML5 <video>: Version: 2.1.2.145
    Twitter for Safari: Version: 1.02
Audio Plug-ins:
    iSightAudio: Version: 7.7.1 - SDK 10.7
iTunes Plug-ins:
    Quartz Composer Visualizer: Version: 1.3 - SDK 10.7
3rd Party Preference Panes:
    3ivx MPEG-4 3rd-Party support link
    DivX 3rd-Party support link
    Flash Player 3rd-Party support link
    Growl 3rd-Party support link
Old Applications:
    None
Time Machine:
    Time Machine not configured!
Top Processes by CPU:
         3%    WindowServer
         3%    Finder
         3%    EtreCheck
         2%    mds
         0%    Dropbox
Top Processes by Memory:
    143 MB    Finder
    41 MB    WindowServer
    31 MB    EtreCheck
    29 MB    Dock
    29 MB    mds
Virtual Memory Information:
    2.18 GB    Free RAM
    597 MB    Active RAM
    197 MB    Inactive RAM
    1.04 GB    Wired RAM
    53.54 GB    Page-ins
    29.16 GB    Page-outs

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) on the advice of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; AC="com.autodesk.AutoCAD com.evenflow.dropbox com.google.GoogleDrive"; H='^[[:space:]]*((127\.0\.0\.1|::1|fe80::1%lo0)[[:space:]]+local|(255\.){3}255[[:space:]]*broadcast)host[[:space:]]*$'; NS=networksetup; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; BI () { $PB\ :CFBundleIdentifier "$1"; }; LC () { $2 launchctl list | awk 'NR>1 && !/0x|\.[0-9]+$|com\.apple\.(AirPortBaseStationAgent|launchctl\.(Aqua|Background|System))$/{print $3}' | grep -Fv "$1"; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; AT () { o=`file -b "$1" | egrep -v '^(A.{16}t$|cann)'`; Ps "${1##*/} format"; }; Pc () { o=`grep -v '^ *#' "$2"`; l=`wc -l <<< "$o"`; [[ l -gt 25 ]] && o=`head -n25 <<< "$o"`$'\n'"[$((l-25)) more line(s)]"; Pm "$1"; AT "$1"; }; Pm () { [[ "$o" ]] && o=`sed -E '/^ *$/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/(\/Users\/)[^/]+/\1-/g' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id -G | grep -qw 80; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed -n 's/^ *//;5p;6p;8p'; h=(`SP Hardware | awk '/ Id/{print $3}; /Mem/{print $2}'`); o=$h; Ps Model; o=$((h[1]<4?h[1]:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d;/[my].*:/d'`; [[ "$o" =~ s:\ [^EO]|x([^8]|8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm POST; p=`SP Power`; o=`awk '/Cy/{print $NF}' <<< "$p"`; o=$((o>=300?o:0)); Ps "Battery cycles"; o=`sed -n '/Cond.*: [^N]/s/^.*://p' <<< "$p"`; Ps "Battery condition"; for b in FireWire Thunderbolt USB; do o=`SP $b | sed -En '/:$/{s/ *:$//;x;s/\n//;/Apple|Intel|SMSC/d;s/\n.*//;/\)/p;};/^ *(V.+ [0N]|Man).+ /{s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm Heat; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; o=; fdesetup status | grep -q On && o=On; Ps FileVault; a=(/ ""); A=(System User); for i in 0 1; do o=`cd ${a[$i]}L*/Lo*/Diag* || continue; for f in *.{cr,h,pa,s}*; do [[ -f "$f" ]] || continue; d=$(stat -f%Sc -t%F "$f"); [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && f="$f *"; echo "$d ${f%%_2*} ${f##*.}"; done | sort | tail`; Pm "${A[$i]} diagnostics"; done; grep -lq '*$' <<< "$o" && printf $'\n\t* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'caug|GPU |hfs: Ru|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|timed? ?o|WARN' -k Message Ane 'SMC:' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel log"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); n=$((${#s[*]}-1)); c="${s[*]}"; o=${s[$n]}%; Ps "CPU usage by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); n=$((${#s[*]}-1)); s[$n]=${s[$n]%[+-]}; c="${s[*]}"; o=$((s[$n]>=25000?s[$n]:0)); Ps "Mach ports used by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; sys=`pkgutil --regexp --only-files --files com.apple.pkg.* | sort | uniq | sed 's:^:/:'`; bi=`egrep '\.(kext|xpc)/(Contents/)?Info.plist$' <<< "$sys" | while read i; do [[ -f "$i" ]] && BI "$i"; done`; o=`kextstat -kl | grep -Fv "$bi" | cut -c53- | cut -d\< -f1`; Pm "Kernel extensions"; li=`egrep 'Launch[AD].+\.plist$' <<< "$sys"`; jl=`while read f; do [[ -f $f ]] && $PB\ :Label $f; done <<< "$li"`$'\n'"$bi"; R && o=`LC "$jl" sudo`; Pm Daemons; o=`LC "$jl"`; Pm Agents; o=`for d in {/,}L*/Lau*; do M; done | grep -Fv "$li" | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/StartupItems; do M; done`; Pm "Startup items"; b=`sed -E '/^.+Lib.+\/Contents\/Info.plist$/!d;s/\/Info.plist$//;/Contents\/./d' <<< "$sys"`; l=`egrep '^/usr/lib/.+dylib$' <<< "$sys"`; [[ "$b" && "$l" ]] && { o=`find -L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type d -name Contents -prune | grep -Fv "$b" | while read d; do i="$d"/Info.plist; [[ -f "$i" ]] || continue; ID=$(BI "$i") || ID="No bundle ID"; printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Bundles"; o=`find /usr/lib -type f -name *.dylib | grep -Fv "$l"`; Pm "Shared libraries"; :; } || echo $'\nReceipts missing'; o=`for e in INSERT_LIBRARIES LIBRARY_PATH; do launchctl getenv DYLD_$e; done`; Pm "Inserted dylibs"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=; defaults read /Library/Preferences/com.apple.alf globalstate | grep -q 0 || o=On; Ps Firewall; o=`scutil --proxy | egrep 'Prox.+: [^0]'`; Pm Proxies; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; i=`route -n get default | awk '/e:/{print $2}'`; I=`$NS -listnetworkserviceorder | sed -En '/ '$i'\)$/{x;s/^$.+$ //p;q;};x'`; n=`$NS -getdnsservers "$I" | awk '!/^T/{printf "not "; exit}'`; Ps "DNS (${n}from DHCP)"; o=`$NS -getinfo "$I" | awk '/k:/{if ($3 !~ "(255\.){3}0") print}; /v6:/{if ($2 !~ "A") print}'`; Pm TCP/IP; [[ "$I" =~ [AW]i ]] && { o=`/S*/*/P*/*/*/*/*/airport -I | awk '/lR/{print $2}'`; o=$((o<=-87?o:0)); Ps RSSI; }; R && o=`sudo profiles -P | grep : | wc -l`; Ps Profiles; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; f=/etc/hosts; Pc hosts <(egrep -v "$H" $f ); AT $f; Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; LD="$(`find /S*/*/F* -type f -name lsregister | head -n1` -dump)"; o=`for ID in $AC; do [[ "$LD" =~ $ID ]] && echo $ID; done`; Pm "App check"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l`; Ps "Restricted user files"; cd; o=`find .??* -path .Trash -prune -o -type d -name *.app -print -prune`; Pm "Hidden apps"; o=`SP Fonts | egrep 'id: N|te: Y' | wc -l`; Ps "Font issues"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=; [[ UID -eq 0 ]] && o=root; Ps UID; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Macbook Air 2014 is very slow after waking from sleep

Constantly, when using my Macbook Air 2014 without power cord (which I am required to do at College), when my laptop goes to sleep, and I then immediately click to wake it up, it takes at least 20 seconds before the log on screen will come up. The machine has also crashed twice in the past week. Is there a solution for this?

You posted in the iPad forum instead of the Mac Book Air forum. To get answers to your question, next time post in the proper forum. See https://discussions.apple.com/welcome I'll request that Apple relocate your post.
 Cheers, Tom

MacBook Air 2012 is very slow to start applications

Hello!
I have a MacBook Air 2012 128gb 4gb RAM OS X ML
I welled up deleting the file system that is responsible for the work of php, but it does not matter, then reinstalled with full formatting.
After reinstalling the protesting all the data and some applications have a long run.
When i click the icon jumps well, and so
iPhoto 5-6 times
Mail - 3 times
Notes and reminders to 3 times
before reinstalling to run immediately after you instantly ...
it is observed only in the native programs
such as Photoshop CS6, Things, Coda, Pages start immediately ...
For most applications perform no complaints, all the missiles, but that launch annoying ...
In what could be the problem?
This Console http://cl.ly/MnBs

You posted in the iPad forum instead of the Mac Book Air forum. To get answers to your question, next time post in the proper forum. See https://discussions.apple.com/welcome I'll request that Apple relocate your post.
 Cheers, Tom

Macbook air mid 2009 very slow

Hello,
I recently bought a Macbook Aid mid 2009 with 2 GB ram, 120GB Sata and 1.86GHZ Core2Duo.
I'm running on OS X 10.9.3 since I bought it.
The laptop is loading very slow many times and I noticed 'kerner_task' taking alot of CPU and RAM.
I'm wondering if my laptop is not good enough for OS X 10.9.3 (this is my first Mac).
Ia there anything I can do?
Thank you

Yours is the first computer I've heard about on these forums that is attempting to run Mavericks with only 2GB of RAM.
Indeed that is acceptable per the Mavericks requirements:
http://support.apple.com/kb/HT5842
... but as you may know, Apple has not sold computers with as little as 2GB RAM for quite a while.
I suggest therefore you make sure you remove any applications that may be overtaxing your machine. Examples are browsers other than Safari, Mac cleaning products (such as Mac Keeper), or any other non-Apple app that has some startup process running (such as Outlook).

My MacBook Air is running very slow...there is an 8sec delay for everything!! help!

Everytime I click on something or am typing there is at least an 8 second delay!! It's aweful....

Everytime I click on something or am typing there is at least an 8 second delay!! It's aweful....

I received this error message when trying to use my time capsule. MacBook Air.sparsebundle is already in use. What does this mean?

I received this error message when trying to use my time capsule. Macbook Air.sparsebundle already is use. What does this mean?

First, restart the MacBook Air and the Time Capsule. In most of the cases, this solves the problem.
If not, see > http://pondini.org/TM/C12.html

HT1941 trying to connect time apsule to macbook air with the ethernet cable in the WAN port the airport utility doesn't detect it

trying to connect time capsule to macbook air with the ethernet cable in the WAN port but the airport utility doesn't detect it but when i put it in the LAN one it does but it doesn't let me configure
any ideas?

Isn't it fun trying to do things without an ethernet cable direct to the computer.. Apple sell a usb to ethernet adapter cable fairly cheap.. makes life a lot easier having something to do hard connections.. or as hard as usb can manage.
Since you have to access the TC by wireless .. press and hold the reset button on the TC for about 10sec until front led flashes rapidly.. don't worry about the ethernet cable.. leave it disconnected.
Now click on the airport symbol and join another network. The TC should revert to its home name.. which will be a combo of Time Capsule and its MAC address. There is no wireless security and you can do the setup.

How can i turn time machine on macbook air?

how can i turn time machine on macbook air?

Attach an external storage device to hold the backups, or choose a Time Capsule on your Network.
System Preferences > Time Capsule
Select the drive which will hold the backups.
Flip the switch in the System Preferences Time Capsule pane to ON.

When I run multiple Microsoft powerpoint files at a time on my MacBook Air, it simply gets hotter and generates little noise (most probably fan noise). Will this make any effect on life span of MBAir??

When I run multiple Microsoft powerpoint files at a time on my MacBook Air, it simply gets hotter and generates little noise (most probably fan noise). Will this make any effect on life span of MBAir??

Theoretically, yes.
Heat, and heat cycling certainly do take a toll on even solid state components. I have several "very old" Macintosh computers, and the logic boards exhibit the effects.
The fan too, running at higher speeds, does eventually cause wear. More than anything, the higher airflow leads to a higher propensity for dust accumulation on the fan, and the heat exchangers.
In practical terms though, maybe not so much. If you plan on having your computer exhibit a reasonable useful life before you retire it or upgrade, you may never experience any of the detrimental effects. I rarely use a computer longer than 3 years, before I sell, give it away, or just stop using it.
Personally, I wouldn't worry about it. Your computer is well designed to give you a long life, even in the manner in which you describe. Take care of it, but use it for what you bought it for. Nothing you mention is in any way, abuse.

How do I install Face Time on My MacBook Air

Can someone tell me how I install Face Time on my MacBook Air please?

Buy it from the Mac App Store...
If you've done that, installation is otherwise transparent.

Macbook air has suddenly become slow takes time to load any page

My macbook air has suddenly become slow in loading pages whether they are on the net or if I am opening a page on the hard drive, need advise on what to do.

what OS are you using?is that happening upon fresh restart?

IMac can see my Macbook Air but not my Macbook

Recently upgraded iMac and Macbook to 10.5.8, Macbook Air running 10.5.7
Both laptops connected to iMac via Netgear wireless router.
All was fine until yesterday.
Now my iMac can't see the Macbook but can see the Macbook Air when I go to Finder/Network on the iMac.
Curiously, the Macbook and the Macbook Air can both see the iMac when I go to Finder/Network on the two laptops.
Have unplugged the wireless router from the mains for five mins to reboot it.
Can confirm that Security/Firewall on the Macbook is set to "Allow All Incoming Connections"
Anyone any suggestions???

try this:
http://discussions.apple.com/thread.jspa?threadID=2119171&tstart=30

Macbook Air 2012 Wifi getting slower

I have had this problem for some time. My Macbook Air (which was running perfectly for the first year or so) is getting increasingly slower on Wifi. I also have the problem that it has to signal reception in one of my rooms, with my other (even older) MacBook Pro having a full signal standing right next to it.
Change of Wifi Channels did not help, changes between 2.4 and 5GHz Band did nothing. This happens with one single application (Safari) running, regardless of DNS settings. I am running out of ideas.
Here is the system dump:
Problem description:
Internet is super slow and Wifi reception very weak compared to other Mac I own
EtreCheck version: 2.1.8 (121)
Report generated April 8, 2015 at 12:05:01 EDT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    MacBook Air (13-inch, Mid 2012) (Technical Specifications)
    MacBook Air - model: MacBookAir5,2
    1 1.8 GHz Intel Core i5 CPU: 2-core
    8 GB RAM Not upgradeable
        BANK 0/DIMM0
            4 GB DDR3 1600 MHz ok
        BANK 1/DIMM0
            4 GB DDR3 1600 MHz ok
    Bluetooth: Good - Handoff/Airdrop2 supported
    Wireless: en0: 802.11 a/b/g/n
    Battery Health: Check Battery - Cycle count 183
Video Information: ℹ️
    Intel HD Graphics 4000
        Color LCD 1440 x 900
        SyncMaster 1920 x 1080 @ 60 Hz
System Software: ℹ️
    OS X 10.10.2 (14C1514) - Time since boot: 8 days 2:46:26
Disk Information: ℹ️
    APPLE SSD TS128E disk0 : (121.33 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
        Macintosh HD (disk1) / : 120.14 GB (23.43 GB free)
            Encrypted AES-XTS Unlocked
            Core Storage: disk0s2 120.47 GB Online
USB Information: ℹ️
    Apple Inc. FaceTime HD Camera (Built-in)
    Apple Internal Memory Card Reader
    Apple Inc. Apple Internal Keyboard / Trackpad
    Apple Inc. BRCM20702 Hub
        Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information: ℹ️
    Apple Inc. thunderbolt_bus
Configuration files: ℹ️
    /etc/hosts - Count: 1
Gatekeeper: ℹ️
    Mac App Store and identified developers
Kernel Extensions: ℹ️
        /Applications/Parallels Desktop.app
    [not loaded]    com.parallels.kext.hidhook (9.0 24251.1052177) [Click for support]
    [not loaded]    com.parallels.kext.hypervisor (9.0 24251.1052177) [Click for support]
    [not loaded]    com.parallels.kext.netbridge (9.0 24251.1052177) [Click for support]
    [not loaded]    com.parallels.kext.usbconnect (9.0 24251.1052177) [Click for support]
    [not loaded]    com.parallels.kext.vnic (9.0 24251.1052177) [Click for support]
        /Library/Application Support/VirtualBox
    [loaded]    org.virtualbox.kext.VBoxDrv (4.3.12) [Click for support]
    [loaded]    org.virtualbox.kext.VBoxNetAdp (4.3.12) [Click for support]
    [loaded]    org.virtualbox.kext.VBoxNetFlt (4.3.12) [Click for support]
    [loaded]    org.virtualbox.kext.VBoxUSB (4.3.12) [Click for support]
        /Library/Extensions
    [loaded]    com.kaspersky.kext.klif (3.0.2a39) [Click for support]
    [loaded]    com.kaspersky.nke (1.6.2a12) [Click for support]
        /System/Library/Extensions
    [loaded]    com.avira.kext.FileAccessControl (1.0.0d1 - SDK 10.9) [Click for support]
Launch Agents: ℹ️
    [failed]    com.adobe.AdobeCreativeCloud.plist [Click for support]
    [loaded]    com.avira.antivirus.general.agent.plist [Click for support]
    [loaded]    com.avira.antivirus.ipm.ui.plist [Click for support]
    [loaded]    com.avira.antivirus.notifications.agent.plist [Click for support]
    [loaded]    com.avira.antivirus.odscan.default.plist [Click for support]
    [loaded]    com.avira.antivirus.scheduler.agent.plist [Click for support]
    [running]    com.avira.antivirus.systray.plist [Click for support]
    [loaded]    com.avira.antivirus.telemetry.agent.plist [Click for support]
    [loaded]    com.avira.antivirus.update.default.plist [Click for support]
    [not loaded]    com.displaylink.useragent-prelogin.plist [Click for support]
    [failed]    com.google.keystone.agent.plist [Click for support]
    [failed]    com.kaspersky.kav.gui.plist [Click for support]
    [loaded]    com.oracle.java.Java-Updater.plist [Click for support]
    [loaded]    org.gpgtools.gpgmail.enable-bundles.plist [Click for support]
    [loaded]    org.gpgtools.gpgmail.patch-uuid-user.plist [Click for support]
    [loaded]    org.gpgtools.Libmacgpg.xpc.plist [Click for support]
    [loaded]    org.gpgtools.macgpg2.fix.plist [Click for support]
    [running]    org.gpgtools.macgpg2.gpg-agent.plist [Click for support]
    [loaded]    org.gpgtools.macgpg2.updater.plist [Click for support]
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist [Click for support]
    [loaded]    com.avira.antivirus.dbcleaner.plist [Click for support]
    [loaded]    com.avira.antivirus.ipm.loader.plist [Click for support]
    [running]    com.avira.helper.watchdox.plist [Click for support]
    [loaded]    com.google.keystone.daemon.plist [Click for support]
    [failed]    com.kaspersky.kav.plist [Click for support]
    [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
    [loaded]    com.oracle.java.Helper-Tool.plist [Click for support]
    [loaded]    com.oracle.java.JavaUpdateHelper.plist [Click for support]
    [loaded]    com.skype.skypeinstaller.plist [Click for support]
    [failed]    com.starfield.backupservice.plist [Click for support]
    [loaded]    org.gpgtools.gpgmail.patch-uuid.plist [Click for support]
    [running]    org.jivesoftware.openfire.plist [Click for support]
    [not loaded]    org.virtualbox.startup.plist [Click for support]
User Launch Agents: ℹ️
    [loaded]    com.citrixonline.GoToMeeting.G2MUpdate.plist [Click for support]
    [running]    com.microsoft.LaunchAgent.SyncServicesAgent.plist [Click for support]
    [loaded]    com.spotify.webhelper.plist [Click for support]
    [not loaded]    org.virtualbox.vboxwebsrv.plist [Click for support]
User Login Items: ℹ️
    iTunesHelper    Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
    Dropbox    Application (/Applications/Dropbox.app)
Internet Plug-ins: ℹ️
    JavaAppletPlugin: Version: Java 8 Update 31 Check version
    o1dbrowserplugin: Version: 5.1.4.17398 [Click for support]
    Default Browser: Version: 600 - SDK 10.10
    AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 [Click for support]
    FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]
    Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
    Flash Player: Version: 17.0.0.134 - SDK 10.6 [Click for support]
    QuickTime Plugin: Version: 7.7.3
    googletalkbrowserplugin: Version: 5.1.4.17398 [Click for support]
    SharePointBrowserPlugin: Version: 14.4.8 - SDK 10.6 [Click for support]
    npgtpo3dautoplugin: Version: 0.1.44.29 - SDK 10.5 [Click for support]
    MeetingJoinPlugin: Version: Unknown - SDK 10.6 [Click for support]
User internet Plug-ins: ℹ️
    WbeTools64_14: Version: 1.0.22.49 © 2012 - SDK 10.6 [Click for support]
    WebEx64: Version: 1.0 - SDK 10.6 [Click for support]
    CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 [Click for support]
    Google Earth Web Plug-in: Version: 7.1 [Click for support]
    fileEditTool64_15: Version: 1.0.35.65 © 2013 - SDK 10.6 [Click for support]
Safari Extensions: ℹ️
    Ultimate Status Bar
    ClickToFlash
    Virtual Keyboard
    KasperskyURLAdvisor
3rd Party Preference Panes: ℹ️
    Flash Player [Click for support]
    GPGPreferences [Click for support]
    Java [Click for support]
Time Machine: ℹ️
    Time Machine not configured!
Top Processes by CPU: ℹ️
        30%    mds
         6%    WindowServer
         1%    avguard-ondemand-mgmt
         0%    ocspd
         0%    firefox
Top Processes by Memory: ℹ️
    481 MB    Maps
    447 MB    softwareupdated
    438 MB    firefox
    352 MB    savapi
    172 MB    Safari
Virtual Memory Information: ℹ️
    824 MB    Free RAM
    4.45 GB    Active RAM
    1.91 GB    Inactive RAM
    1.11 GB    Wired RAM
    12.78 GB    Page-ins
    17 MB    Page-outs
Diagnostics Information: ℹ️
    Standard users cannot read /Library/Logs/DiagnosticReports.
    Run as an administrator account to see more information.

Make a "Genius" appointment at an Apple Store, or go to another authorized service provider. You may have to leave the machine there for several days.
Back up all data on the internal drive(s) before you hand over your computer to anyone. There are ways to back up a computer that isn't fully functional—ask if you need guidance.
If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
Apple also recommends that you deauthorize a device in the iTunes Store before having it serviced.
*An SSD doesn't need to be zeroed.

Did macbook air mid 2009 running slow with mountain lion?

did macbook air mid 2009 running slow with mountain lion?

Yours is the first computer I've heard about on these forums that is attempting to run Mavericks with only 2GB of RAM.
Indeed that is acceptable per the Mavericks requirements:
http://support.apple.com/kb/HT5842
... but as you may know, Apple has not sold computers with as little as 2GB RAM for quite a while.
I suggest therefore you make sure you remove any applications that may be overtaxing your machine. Examples are browsers other than Safari, Mac cleaning products (such as Mac Keeper), or any other non-Apple app that has some startup process running (such as Outlook).

IMac Time Capsule OK, Macbook Air Time Capsule Very Slow, both 10.9.5

Similar Messages

Maybe you are looking for