Imac to TV with horizontal bar

I connected my Imac to my TV using the mini-dvi to video adapter and it worked, however I have a horizontal bar going up across my TV screen. How do I fix this problem?

You need a > Moshi Mini DP to HDMI Adapter with Audio Support - Apple Store (U.S.) to plug into the ThunderBolt port and an HDMI cable.

Similar Messages

Installing Yosemite on iMac 2013 hangs with status bar midway

Trying to install Yosemite, but screen just displays a white screen with apple logo and the status bar is around 50 %
been running for about 4.5 hrs, will leave overnight, but then what if no joy.
I Thought that Apple was good over these types of things, it is a Apple iMac 27" 2012 machine with 8Gb Ram.
thanks
ian

If you use the power button to shut down and then restart does it boot?  menu/About This Mac - what is installed?
Do a backup, preferably 2 separate ones on 2 separate drives.
Revert to a Previous OS X - Yosemite
Revert Yosemite to Mavericks
If you do revert, I'd use Setup Assistant to restore your data. This process takes a while, so do it when you won't need the computer for several hours, based on my experience.

JScrollPane size problems with horizontal bar

Hello,
I have made a panel with some lines of text (JLabels). The panel is contained inside a JScrollPane. When it gets a horizontal scrollbar, the bar hides the bottom-most line of text and you get a vertical scrollbar too.
How do I get the JScrollPane to add the height of the horizontal scrollbar to its own height if it still fits inside its own maximum height? It is ridiculous when you have like 3 lines of text inside it and you have to scroll it to see the bottom line.
Thanks,

Thanks, that solved the problem good enuff for me here. Now I also got another similar problem, at http://forum.java.sun.com/thread.jsp?forum=57&thread=206828. Got any ideas on that :) ?

Horizontal bar with red for negative and green for positive?

I need to use CF9 to create horizontal bar chart where the intensity of the red (negative) is determined by the amount of negativity of the values and similarly the intensity of the green is based on the amount of positivity of the values.
See attached snapshot. Ignore the value label.
Can CF10 do this. I briefly looked but does not appear so.
Any advice? THANKS!!

Yes, with the new charting engine it is possible to do this with rules. Check out my example at http://www.cfuser.com/library/demos/index.cfm?do=charting&get=bcr. You have to set the threshholds and the colors. The colors are two part to allow for gradients. I have also just posted a write-up at http://www.cfuser.com/rules-preview-zoom-and-flash/

How do I create a vertical side menu with its own styling separate from the horizontal bar above it?

Hello. I need assistance in styling my side menu. I would like for it to have a different style than the horizontal bar that is above it. I would like that the side menu have a black background and with white text vertically aligned to the left. But I would also like that the mouse's arrow to turn into a hand when it touches the letters instead of during the entire width of the background. When I began styling the text, everything aligned fine until I added the links in html code. When I added the <a> tag and created a link to another page, the text goes from the left to the center of the black box. And the entire width is a link rather than just the words. To correct this, I tried renaming the div tag containg the menu. I tried renaming the ul tag. And I tried renaming the li tag and changing the declarations. None of these ideas worked. I thought about changing the <a> tag in the head of the document, but that didn't change the styling either. I also tried creating the black background by inserting a black box as a background image with the links over top of the image. It didn't work. I would appreciate your assistance.   I will supply the coding if anyone is interested in looking at it. Thank you.
Nora.

I can post a link to the page. But I will need to upload it. It will take a day to show. But after I wrote to you. I began working with creating additional a:link styles. I was able to create a shortened clickable area of one the words in the vertical menu. Your advice reinforced what I have learned. The following code shows that I started to make different styles of the a:link for each word on the vertical menu. I think that this will work. To indicate the different a:link style I used bold letters . Thank you very much.
html:
<div class="side_menu_nav">
     <ul class="side_menu">
          <li class="side_menu"><a href="still image.html">STILL IMAGE</a></li>
          <li class="side_menu_video"> <a href="video.html">VIDEO</a></li>
          <li class="side_menu" ><a href="animation.html">ANIMATION</a></li>
          <li class="side_menu" ><a href="website.html">WEBSITE</a></li>
     </ul>
</div>
CSS:
.side_menu_nav {
    margin-top: 100px;
    width: 190px;
    height: 230px;
    background-color: #F63;
    font-size: 18.5px;
    z-index: 5;
    font-family: Arial, Helvetica, sans-serif;
side_menu ul {
    list-style-type: none;
    padding-left: 10px;
side_menu li {
    display: list-item;
.side_menu a:link {
    text-align: left;
    color: #FFF;
    background-color: #000;
    padding-left: 0px;
    padding-right: 0px;
    padding-top: 0px;
    padding-bottom: 0px;
    width: 190px;
    margin-top: 15px;
    margin-left: 15px;
    margin-right: 0px;
    text-decoration: none;
    width: 120px;
.side_menu_video a:link {
   text-align: left;
    color: #FFF;
    background-color: #000;
    padding-left: 0px;
    padding-right: 0px;
    padding-top: 0px;
    padding-bottom: 0px;
    width: 65px;
    margin-top: 15px;
    margin-left: 15px;
    margin-right: 0px;
    text-decoration: none;
.side_menu a:visited {
    color: #FFF;
    background-color: #000;
.side_menu a:hover {
    color: #CCC;
.side_menu a:active   {
    color: #000;/*text*/

Displaying a fraction with a horizontal bar between the denominator and numerator

Hello guys
I have a dynamic textfield and am going to display textual content in it dynamically.
But I have a fraction in that textual part and I want to display that fraction as a "typical fraction with a horizontal bar between the denominator and numerator". Hope you understand what I am asking.
Please look at the attached image.
Thanks for your input.
cheers

@dmennenoh
Thanks for your input.
So its kind of superimposing Sprite or MovieClip that has a fraction.Basically I have to make two textfields and put them together over a horizontal bar so that it looks like a fraction and then place it over a big textfield where the fraction should be.
Its a very long process.
OMG, isn't there any other easy way to do this?

HT201210 Help, I just gave iTunes the assignment to update my iPhone5 to iOS7 and now it gives an unknown error (6). The iPhone is still hooked to my laptop, and shows the black screen and bright Apple with the horizontal bar, telling it's in the middle o

Help, I just gave iTunes the assignment to update my iPhone5 to iOS7 and now it gives an unknown error (6). The iPhone is still hooked to my laptop, and shows the black screen and bright Apple with the horizontal bar, telling it's in the middle of something. What should I do?

DFU mode? How do I do that? So far the only thing I can do is hold down both buttons to power it on and nothing is on the screen and it wont reconize on my computer....

Problems with horizontal lines on the iMac. Someone knows the solution?

For several months my Imac has horizontal lines have been growing. Problems with horizontal lines on the iMac. Someone knows the solution?

You have 14 days to return the computer w/no questions asked. Plus you have 90 days of FREE phone tech support on top of your standard 1 year warranty unless you also purchased AppleCare which gives you an additional 2 years of coverage plus FREE phone support.
Strongly suggest that you take FULL advantage of the above before it runs out. Let Apple deal w/the problems.
That being said, no new Mac comes w/Snow Leopard which your profile confirms you have.
Mac OS X (10.6.8)

Horizontal bars with SD movies

So...I'm a new ATV (2nd gen) user. We recently moved and I'm just not a 100% sure that everything is setup the way it's supposed to be...
When I rent movies on my ATV, I often have a bar at the top and bottom when viewing the movie on my HDTV (Samsung LN40A550). For example, I rented Friday Night Lights (the movie) last night, and I had the horizontal bars. I only rent SD content on the ATV since my connection is not very fast.
I realize that most movies have a higher aspect ratio and that sometimes bars on the top and bottom are common, but I wanted to make sure that THIS was the reason and not some incorrect setting on my TV...especially, since I'm watching everything in SD.
When I rent Desperate Housewives, the whole screen is filled up.
Since I'm new to renting iTunes movies, I'm just not sure what to expect. And we don't have our TV hooked up to a cable service so I can't tell what other content looks like on our TV (we live out of the country and the cable options leave much to be desired).
Thanks so much.

it's correct.
there are various different widescreen aspect ratios, and depending on which one the movie is in will depend how much of the screen is filled.

Horizontal Bar Chart and Overlaying Line Chart

I am using SSRS 2008 and developing my reports in BIDS.
I have a report with two data points. I want to chart the first as a bar (horizontal) chart and then the second as an overlaying line chart.
I created both data series, originally, as a bar chart. I have clicked on the second series in the "Drop Data Fields Here" area and changed the chart to a line chart. When I do that, it changes both series to a line chart.
However, if I use the column (vertical) chart for the first series, it will let me make the second one a line chart.
Is this a limitation of SSRS 2008? Can I not have one data point be the horizontal bar chart and the second one a line chart?
If so, are there any suggestions how to get around this?
Thanks.

Both charts for SSRS 2005/2008 are very limited when it comes to horizontal charts and are infact supporting only left-to-right bar charts, with no ability to combine them with other charting types (lines, areas, points etc.). For a SSRS charting solution that supports all types of charting type combinations in left-to-right and right-to-left horizontal fashion you can use Nevron Chart for SSRS - www.nevron.com. Besides a huge number of charting types and subtypes (most of which are not available in the MS Chart for SSRS 2008) it also provides better image quality in 2D and 3D modes, more settings, has support for rich text formatting in texts, has image filters, ability to customize via C# code and implements many more large and small charting related details.
Best regards,
Crank

Problem description: My iMac (early 2008) with OS 10.10.2 runs slow. I have run EtreCheck several times, and I am unable to move beyond Problem System Launch Agents (11 processes killed due to memory pressure) and Launch Daemons (12 processes killed

Problem description:
My iMac (early 2008) with OS 10.10.2 runs slow. I have run EtreCheck several times, and I am unable to move beyond Problem System Launch Agents (11 processes killed due to memory pressure) and Launch Daemons (12 processes killed).
EtreCheck version: 2.1.8 (121)
Report generated April 14, 2015 at 9:50:48 AM EDT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    iMac (24-inch, Early 2008) (Verified)
    iMac - model: iMac8,1
    1 3.06 GHz Intel Core 2 Duo CPU: 2-core
    4 GB RAM Upgradeable
        BANK 0/DIMM0
            2 GB DDR2 SDRAM 800 MHz ok
        BANK 1/DIMM1
            2 GB DDR2 SDRAM 800 MHz ok
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
    NVIDIA GeForce 8800 GS - VRAM: 512 MB
        iMac 1920 x 1200
System Software: ℹ️
    OS X 10.10.2 (14C1510) - Time since boot: 4 days 20:29:22
Disk Information: ℹ️
    Hitachi HDS721010KLA330 disk0 : (1 TB)
        EFI (disk0s1) <not mounted> : 210 MB
        Mac iBook HD (disk0s2) / : 999.35 GB (521.60 GB free)
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
USB Information: ℹ️
    Apple Inc. Built-in iSight
    Apple, Inc. Keyboard Hub
        Apple, Inc Apple Keyboard
    Apple Computer, Inc. IR Receiver
    Apple Inc. BRCM2046 Hub
        Apple Inc. Bluetooth USB Host Controller
Configuration files: ℹ️
    /etc/sysctl.conf - Exists
Gatekeeper: ℹ️
    Mac App Store and identified developers
Problem System Launch Agents: ℹ️
    [killed]    com.apple.CallHistoryPluginHelper.plist
    [killed]    com.apple.CallHistorySyncHelper.plist
    [killed]    com.apple.coreservices.appleid.authentication.plist
    [killed]    com.apple.icloud.fmfd.plist
    [killed]    com.apple.Maps.pushdaemon.plist
    [killed]    com.apple.printtool.agent.plist
    [killed]    com.apple.SafariNotificationAgent.plist
    [killed]    com.apple.sbd.plist
    [killed]    com.apple.scopedbookmarkagent.xpc.plist
    [killed]    com.apple.telephonyutilities.callservicesd.plist
    [killed]    com.apple.warmd_agent.plist
    11 processes killed due to memory pressure
Problem System Launch Daemons: ℹ️
    [killed]    com.apple.AssetCacheLocatorService.plist
    [killed]    com.apple.ctkd.plist
    [killed]    com.apple.emond.aslmanager.plist
    [killed]    com.apple.icloud.findmydeviced.plist
    [killed]    com.apple.ifdreader.plist
    [killed]    com.apple.nehelper.plist
    [killed]    com.apple.nesessionmanager.plist
    [killed]    com.apple.periodic-daily.plist
    [killed]    com.apple.periodic-weekly.plist
    [killed]    com.apple.softwareupdate_download_service.plist
    [killed]    com.apple.wdhelper.plist
    [killed]    org.cups.cupsd.plist
    12 processes killed due to memory pressure
Launch Agents: ℹ️
    [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
    [running]    com.adobe.AdobeCreativeCloud.plist [Click for support]
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist [Click for support]
    [loaded]    com.adobe.SwitchBoard.plist [Click for support]
    [running]    com.arubanetworks.via.NetworkMonitorLaunchd.plist [Click for support]
    [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
User Launch Agents: ℹ️
    [loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
    [loaded]    com.adobe.ARM.[...].plist [Click for support]
    [loaded]    com.adobe.ARM.[...].plist [Click for support]
    [loaded]    com.google.keystone.agent.plist [Click for support]
    [running]    com.spotify.webhelper.plist [Click for support]
User Login Items: ℹ️
    ChronoSyncBackgrounder    Application (/Library/Application Support/ChronoSync/ChronoSyncBackgrounder.app)
    Dropbox    Application (/Applications/Dropbox.app)
    Canon IJ Network Scanner Selector2    Application Hidden (/Library/Printers/Canon/IJScanner/Utilities/Canon IJ Network Scanner Selector2.app)
    Google Drive    Application (/Applications/Google Drive.app)
Internet Plug-ins: ℹ️
    Google Earth Web Plug-in: Version: 6.1 [Click for support]
    Default Browser: Version: 600 - SDK 10.10
    AdobeExManDetect: Version: AdobeExManDetect 1.1.0.0 - SDK 10.7 [Click for support]
    Flip4Mac WMV Plugin: Version: 3.1.0.24   - SDK 10.8 [Click for support]
    OVSHelper: Version: 1.1 [Click for support]
    AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 [Click for support]
    AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
    DivX Web Player: Version: 3.2.4.1250 - SDK 10.6 [Click for support]
    FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]
    Flash Player: Version: 17.0.0.134 - SDK 10.6 Outdated! Update
    iPhotoPhotocast: Version: 7.0
    QuickTime Plugin: Version: 7.7.3
    SharePointBrowserPlugin: Version: 14.4.8 - SDK 10.6 [Click for support]
    AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
    Silverlight: Version: 5.1.20913.0 - SDK 10.6 [Click for support]
    JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
User internet Plug-ins: ℹ️
    WebEx: Version: 1.0 [Click for support]
    Google Earth Web Plug-in: Version: 7.1 [Click for support]
3rd Party Preference Panes: ℹ️
    Adobe Version Cue CS2 [Click for support]
    Flash Player [Click for support]
    Flip4Mac WMV [Click for support]
    VIA PrefPane [Click for support]
Time Machine: ℹ️
    Time Machine not configured!
Top Processes by CPU: ℹ️
         3%    WindowServer
         3%    Mail
         2%    com.apple.iCloudHelper
         1%    Creative Cloud
         1%    Google Chrome
Top Processes by Memory: ℹ️
    223 MB    Google Chrome
    150 MB    Finder
    129 MB    Google Chrome Helper
    112 MB    Mail
    69 MB    Google Drive
Virtual Memory Information: ℹ️
    35 MB    Free RAM
    1.45 GB    Active RAM
    1.45 GB    Inactive RAM
    888 MB    Wired RAM
    27.01 GB    Page-ins
    851 MB    Page-outs

When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

I can create a bookmark but when I tap on it the website does not appear only a blank page with horizontal lines

I can create a bookmark and it appears as favourite but when I tap to open only a blank page appears with horizontal lines

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that temporarily turns off hardware acceleration, resets some settings, and disables add-ons (extensions and themes).
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu:
*In Firefox 29.0 and above, click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
*In previous Firefox versions, click on the Firefox button at the top left of the Firefox window and click on ''Help'' (or click on ''Help'' in the Menu bar, if you don't have a Firefox button) then click on ''Restart with Add-ons Disabled''.
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
When the Firefox Safe Mode window appears, select "Start in Safe Mode".
:[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, theme, or hardware acceleration. Please follow the steps in the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.

Display -ve Measure Values in Horizontal Bar Chart on right hand side or in bar

In OBIEE I have an issue where the negative measure values in a horizontal bar chart are displayed on the left and overlap with the Y axis values, how do I force these values to be displayed on the right or in the bar itself ? The measure values are set to always on, hoverover cannot be the solution

Hi,
It should not be overlapped. If you are using horizontal bar then 0 will come in center. It should show structure like:
|
|
|
|
|
|-------------------------------------------------
-4 -2 0 2 4
May I know in your report, how it is looking and what is your requirement.
Thanks

Horizontal bars in matrix or cross tab reports

I want to know whether it is possible to create a report having Horizontal bars using custom HTML in Matrix and Cross type of views.
Answer me if any one knows.

You can do this with a Custom HTML report for List Views (only).
http://www.oracle.com/technology/products/integration/bam/index.html
Go to Technical Notes, and see "Custom HTML Reports".
Regards, Stephen

How do I create a jtable with horizontalScroll bar,plz help me!

I created a jtable component,Because my table's columns has 50 items,I must need a horizontalScroll Bar.
but I find the horizontalScroll don't display,when I add record to the jtable,the verticalScroll Bar is showed.How do I create a jtable with horizontalScroll bar,can u help me!
thank you in advance!

Hi,
This piece of code will help :
     //Get the Component Adapter for taking action against resizing of
//of Panel
ComponentListenerAdapter componentAdapter =
new ComponentListenerAdapter()
//Get the scrollbar or remove the scrollbar upon resizing
protected void resizingAction()
Container tableParent = table.getParent();
if (tableParent instanceof JViewport)
//Check if the width of the Table Parent Container
//is less than the Preferred Size of the Table
if (tableParent.getSize().getWidth() <
table.getPreferredSize().getWidth())
//Yes it is
//Remove the Auton Resize Function and get the
//Scrollbar
table.setAutoResizeMode(JTable.AUTO_RESIZE_OFF );
else
//No it is not
//Get the Auto Resize functionality back in place
table.setAutoResizeMode(
JTable.AUTO_RESIZE_SUBSEQUENT_COLUMNS);
//Add the component Adapter to the Table Header
table.getTableHeader().addComponentListener(componentAdapter);
private abstract class ComponentListenerAdapter
implements ComponentListener
          * The <code>componentHidden<code> method has no implementation
          * @param event The Event occured whenever the Component is Hidden
          public void componentHidden(ComponentEvent event)
               //No Implementaion - Intentially Left Blank
          * The <code>componentShown</code> method has no implementation
          * @param event The Event occured whenever the Component is Shown
          public void componentShown(ComponentEvent event)
               //No Implementaion - Intentially Left Blank
          * The <code>componentMoved</code> method has no implementation
          * @param event The Event occured whenever the Component is Moved
          public void componentMoved(ComponentEvent event)
               //No Implementaion - Intentially Left Blank
          * The <code>componentResized</code> method is invoked whenever the
          * component is resized. The resizing action will set the columns and
          * scrollbar to act properly
          * @param event The Event occured whenever the Component is Resized
          public void componentResized(ComponentEvent event)
               resizingAction();
* Subclasses of this override this method to determine what is to be
* done once the Component has been Resized
protected abstract void resizingAction();
Hope this will solve all your JTable horizontal resizing problems
--j

Imac to TV with horizontal bar

Similar Messages

Maybe you are looking for