Imac tries boot and turns off

When I turn on my iMac, a white screen with an Apple logo appears with a rotating circle right below the logo.  After a while, it fails to boot and turns off.  I tried turning the computer on while pressing Command R or Shift Command R P but nothing seems to work.  Pressing those buttons while turning on just makes the computer turn off sooner.  Does anyone have any suggestion?

Hello DESOMBRE,
It seems you cannot successfully boot up your Mac or enter recovery mode. Based on the information you have provided, it appears your iMac needs to be serviced. The following link should help you get started with the process and has links with additional information on topics such as warranty and service pricing, battery replacement, and express replacement service.
Apple - Support - Service Answer Center
Thank you for contributing to Apple Support Communities.
Cheers,
Bobby_D

Similar Messages

  • Imac keeps restarting and turning off on it's own.

    Just recently my iMac 21.5" 2010 (10.7.4) has been restating and turning off unexpectedly on it own. I've had this Mac for over a year and have never had this problem before and haven't even changed any settings or done anything to it.
    The biggest thing I've done to it was update it's software.

    Hello, have you blown the dust ou tlatey?
    If it's cooled foran hour or so dies it Boot?
    Do you have the extended 3 year AppleCare?
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
    If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
    If 10.7.0 or later...
    Bootup holding CMD+r, or the Option/alt key to boot from the Restore partitiion & use Disk Utility from there.

  • System boots and turns off in seconds

    My system is hp dv7 4010tx it was working perfectly and suddenly it turned off and now just power on all lights up and fan run just for seconds and turns off I have done the hard reset still nothing can u guys plz help me ?

    Hi pvharis,
    Thank you for joining the HP Forums! It will be hard to determine the exact cause of the problem if it doesn't stay on. At the moment it just turns for a few seconds and then dies away. There could be a problem with the battery or the power cord possible not charging properly. Do you have another power cord that you could try? Do you ever see the Num or Caps Lock keys flashing? If so how many times does it flash?
    Thank you,
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • There are songs that are on my phone that aren't in my iTunes.  How do I delete them?  I've tried synching and turning off ITunes match.

    I have a bunch of songs on my phone that aren't on my ITunes.  How do I delete them?

    Try deleting all music from your phone by going to Settings>General>Usage>Music, swiping across All Music, then tapping Delete.  (After doing this, you'll have to redownload your music again from iTunes Match.)

  • My imac will not load after I enter my password. The only thing I get is the arrow from my mouse on top of a blank white screen.  Can anyone tell me what this is?  I've restarted and turned off several times.  I left it on in this state for 8 hours and

    My imac will not load after I enter my password. The only thing I get is the arrow from my mouse on top of a blank white screen.  Can anyone tell me what this is?  I've restarted and turned off several times.  I left it on in this state for 8 hours hoping it would reload and work.  No luck.

    Hello KCC4ME,
    You may try booting your Mac in Safe Boot, as it can resolve many issues that may prevent a successful login.
    OS X: What is Safe Boot, Safe Mode?
    http://support.apple.com/kb/HT1564
    If a Safe Boot allows you to successfully log in, you may have issues with one or more login itmes (while the following article is labelled as a Mavericks article, it is viable for earlier versions of the Mac OS, as well).
    OS X Mavericks: If you think you have incompatible login items
    http://support.apple.com/kb/PH14201
    Cheers,
    Allen

  • TS1398 My Ipad was working but I now can't access the internet. I have tried resetting and turning Wifi on and off.  It is just showing as buffering all the time?  Please help

    My Ipad was working on the internet but it now won't connect.  I have tried resetting the network and turning Wifi on and off.  When trying to connect it is continuously buffering.  Can anyone please help??  Thanks in advance

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Itunes will not connect to the internet or access store with working internet connection. ive already tried updating to latest version and turning off windows firewall. running a new dell computer w/ windows 7 with minimal programs installed

    Itunes will not connect to the internet or access store with working internet connection. ive already tried updating to latest version and turning off windows firewall. running a nItunes will not connect to the internet or access store with working internet connection. ive already tried updating to latest version and turning off windows firewall. running a new dell, windows 7 ultimate, no virus or firewall programs installed.

    This my sound too simple, but I just kept clikning on the arrow next to the selected music and it finally "Kicked" in.
    I live in Europe ,So Be persistent and don't give up !  Aug. 2013

  • My new iPod touch won't let me view my pictures. It lets me open the app but then crashes when I try to open an album. I've tried resetting and turning it off for a while but nothing has worked. What can I do?

    My new 4th generation iPod touch won't let me view my pictures.. It lets me get into the app but when I try to look at an album it crashes. I've tried resetting and turning it off for a while and nothing has worked. What do I do?

    - Try restoring the iPod from backup
    - Next restore to factory defaults/new iPod.

  • When trying to use App Store I get a message "could not sign in an unknown error has occurred." I reset our connection and turned off iPad. Any suggestions?

    When trying to use the App Store, I get a message "could not sign in, an unknown error has occurred,  any suggestions what is wrong?  I reset our Internet and turned off the iPad. 

    Sign out of your account, restart the iPad and then sign in again.
    Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Go back to Settings>iTunes & App Store>Sign in and then try again.

  • I was transferring data from my old iMac to my new iMac via Time Machine. After about 4 hours, the electrical power fluctuated and turned off my wi-fi. Now most of my necessary programs are useless. How do I erase and start over?

    I was transferring data from my old iMac to my new iMac via Time Machine. After about 4 hours, the electrical power fluctuated and turned off my wi-fi. Now most of my necessary programs are useless. How do I erase that mess and start over?

    Hello there, LynnS.
    The following Knowledge Base article and it's referenced link should get you started with the Erase and Install of Mavericks:
    OS X Mavericks: Erase and reinstall OS X
    http://support.apple.com/kb/PH14243
    Once you've gone through those 2 articles, this article should help you with restoring from your Time Machine Backup:
    OS X Mavericks: Recover your entire system
    http://support.apple.com/kb/PH14185
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • HT201413 Whenever i try to sync my ipod a message keeps coming up saying "1 or more items could not be synced", apparently its error -69. Please help, i've tried rebooting my laptop, installing the latest itunes and turning off the wifi but nothing seems

    Whenever i try to sync my ipod a message keeps coming up saying "1 or more items could not be synced", apparently its error -69. Please help, i've tried rebooting my laptop, installing the latest itunes and turning off the wifi but nothing seems to work.

    Are you using security software on your PC? If yes, try to disable the software or check the settings. More info here: http://support.apple.com/kb/TS3125

  • I'm trying to use a madcatz controller on the mac but it turns on for 2 seconds and turns off. the system profiler picks it up as a xbox 360 gamepad but says its not been configured. how can i allow my self use this with my games.

    i'm trying to use a madcatz controller on the mac but it turns on for 2 seconds and turns off. the system profiler picks it up as a xbox 360 gamepad but says its not been configured. how can i allow my self use this with my games!

    I have exactly the same problem.
    I'm a little peed-off with Microsoft on this. The original wireless controller I have doesn't work either since the cable I'm using is 'just' the charge and play cable, so a direct connection to my Mac won't work with this cable. It's a cable for god's sake. Why on EARTH put any limitations on this!?!?
    Next I learn I need an additional USB wireless receiver from Microsoft to get my original 360 controller to talk to my Mac. As I certainly don't want to fork any more microsoft dollars on this, this is not an option.
    Next I think, yes! I have a MadCatz 360 wired USB controller. This should surely do the trick just plugging it in and the way I go. But oh no, for some reason I plug my MadCatz Xbox360 controller in, it flashes a few times then switches off and can't be turned on again.
    The System Profiles recognizes it as a MadCatz 360 device controller but that is about it, but the ontroller software I download for the System Prefs (360Controller, USBOverdrive etc) don't even recognize the controller as being plugged in.
    What the **** Is The Microsoft Deal with all of this!?!?
    PS: Oh, and I forgot to mention, there are No drivers for device 4716 that I can find on the MadCatz website, or am I going blind?
    If anyone has a link, it would be appreciated.
    Message was edited by: nostrawaggus

  • I am getting a message in the middle of my imac screen instructing me to hold down the on-off button and turn off the machine. The message is in several foreign languages beside english, and there is not way to get rid of it. The curser is inactive.

    I am getting a message in the middle of my imac screen instructing me to hold down the on-off button and turn off the computer. The message is in several languages and completely takes over the computer disabling the mouse and all other functions. The only option is to unplug the computer or turn it off. I'm concerned that this is a virus. It does not look like it's related to Apple or the imac OS.

    That sounds like a kernel panic. These are generally hardware related, often caused by poorly seated or fauly RAM.
    What is a Kernel Panic?
    http://support.apple.com/kb/TS3742
    and  http://support.apple.com/kb/TS1892?viewlocale=en_US
    http://developer.apple.com/mac/library/technotes/tn2002/tn2063.html
    More details here:
    http://www.thexlab.com/faqs/kernelpanics.html
    Useful articles on how to avoid and eliminate kernel panics here:
    http://reviews.cnet.com/8301-13727_7-10344626-263.html?tag=mfiredir
    http://www.macworld.com/article/2027201/how-to-troubleshoot-a-kernel-panic.html# tk.nl_mwhelp

  • My iphone 4s was updating to like 7.1 or 7.2 and i tried to updating by the iphone but it froze and turned off. and when i tried turning it back on the phone kept going to a screen that said plug it in to your computer i did but it froze at the scree

    my iphone 4s was updating to like 7.1 or 7.2 and i tried to updating by the iphone but it froze and turned off. and when i tried turning it back on the phone kept going to a screen that said plug it in to your computer i did but it froze at the screen where it says plug it into iTunes. ive tried plugging it in to the computer but the phone turns itself off in the process. my old phone broke so I need to use the 4s

    Hi sgray2832,
    If you are having an issue with your iPhone becoming unresponsive or turning off unexpectedly, I would suggest that you troubleshoot using the steps in this article - 
    iOS: Not responding or does not turn on - Apple Support
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • My iphone 4 suddenly turned off and will not turn on. It is not jailbroken and had a full battery. I have tried charging and turning it on but neither will work. What do I do?

    My iphone 4 suddenly turned off and will not turn on. It is not jailbroken and had a full battery. I have tried charging and turning it on but neither will work. What do I do?

    sadly most likely u have to buy a new battery unless u didint update ur ios cause people on ios 4 are having problems like that

Maybe you are looking for

  • CR XI Testversion Download

    Hallo, habe einen Link für einen Download von CR XI als 30 Tage Testversione erhalten. (https://www.sap.com/germany/campaign/2010_CURR_SAP_Crystal_Reports_XI_Developer/WTY_2010_CURR_SAP_Crystal_Reports_XI_Developer.epx?Level=1&FormResultID=31c402b8-7

  • Safari won't open (it crashes straight away) LION

    I'm using OS 10.7.5 and ever since i did a software update Safari just crashes before opening a page, to the point i've had to download firefox, but I want Safari back if anyone could help me

  • How to use string control as terminal window

    Hello All I am trying to create a terminal window in my VI and to do this i have a string control and a string indicator. I want the user to be able to write a command in the terminal and when hitting enter the control should update, but not before!

  • How to link vbak and vbrp tables

    hi friends, i want to display lips table values based on lips-vbeln = it_vbrp-vgbel here i want a filed thru which i can link vbrp-<fieldname> to vbak/vbap-vbeln so that i can get values into it_vbrp. here is equation.   it_vbrp =>   vbak-vbeln = vbr

  • PSE 10 default program

    I have installed PSE 10 but it does not show up in the default program list in windows 7. I am unable to right click on an image file and go to open with and select elements 10. Would be grateful for any help.