IMac turns-off when you adjust the screen

Brand new iMac simply turns-off without warning when you adjust the screen or connect to the usb port.
How do you prevent this from happening??

ptrd --
Welcome to Apple Discussions!
We're other Mac users here, asking questions and sharing solutions.
It sounds like you may not have the power cord pushed in tightly enough
to the back of the screen port. Push it in really really tightly, OK?

Similar Messages

MAC is turned off when you start the application.

MAC выключается при запуске приложений.
MAC is turned off when you start the application.
P.S. it is desirable to give an answer on the Russian
Interval Since Last Panic Report: 69711 sec
Panics Since Last Report:          1
Anonymous UUID:                    BF785864-5B2E-7638-B9E8-ED938B20D6F6
Thu May 23 20:28:41 2013
panic(cpu 2 caller 0xffffff80242b7e95): Kernel trap at 0x0000000000000000, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0x0000000000000000, CR3: 0x00000000053ca068, CR4: 0x00000000001606e0
RAX: 0xffffff8024813e10, RBX: 0x0000000000000001, RCX: 0xffffff80248e04f0, RDX: 0xffffff8024890100
RSP: 0xffffff810cd7b978, RBP: 0xffffff810cd7b9a0, RSI: 0x0000000000000001, RDI: 0xffffff8045a66410
R8: 0x000000000000000e, R9: 0xffffff8045a90908, R10: 0xffffffffffffffff, R11: 0x00000000ffffffff
R12: 0xffffff803e98cc02, R13: 0x0000000000000000, R14: 0xffffff803e98cc10, R15: 0xffffff8045a66410
RFL: 0x0000000000010202, RIP: 0x0000000000000000, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x0000000000000000, Error code: 0x0000000000000010, Fault CPU: 0x2
Backtrace (CPU 2), Frame : Return Address
0xffffff810cd7b610 : 0xffffff802421d626
0xffffff810cd7b680 : 0xffffff80242b7e95
0xffffff810cd7b850 : 0xffffff80242cd4dd
0xffffff810cd7b870 : 0x0
0xffffff810cd7b9a0 : 0xffffff80242772b2
0xffffff810cd7b9d0 : 0xffffff8024585aae
0xffffff810cd7b9e0 : 0xffffff80242f0981
0xffffff810cd7ba30 : 0xffffff80242f0021
0xffffff810cd7ba70 : 0xffffff80242f10d6
0xffffff810cd7baa0 : 0xffffff80242ed939
0xffffff810cd7bac0 : 0xffffff8024515c0a
0xffffff810cd7bb20 : 0xffffff802431112c
0xffffff810cd7bb90 : 0xffffff80242fc5f1
0xffffff810cd7bd90 : 0xffffff80242fc93d
0xffffff810cd7bf50 : 0xffffff80245e063a
0xffffff810cd7bfb0 : 0xffffff80242cdd23
BSD process name corresponding to current thread: installd
Mac OS version:
12D78
Kernel version:
Darwin Kernel Version 12.3.0: Sun Jan 6 22:37:10 PST... [Show more]

A: MAC is turned off when you start the application.

I took in the store returned MAC. Although when you start offering configure everything from scratch. The OSes can reinstall?
Last night passed out on completion of the work.
Interval Since Last Panic Report: 75071 sec
Panics Since Last Report:          2
Anonymous UUID:                    BF785864-5B2E-7638-B9E8-ED938B20D6F6
Thu May 23 23:25:35 2013
panic(cpu 2 caller 0xffffff80036b7e95): Kernel trap at 0xffffff80036102b1, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0x0000000000040001, CR3: 0x0000000079b9d056, CR4: 0x00000000001606e0
RAX: 0x0000000000040001, RBX: 0x000000000000002c, RCX: 0x7fffffffffffffff, RDX: 0xffffff80f546bd88
RSP: 0xffffff80f546bd30, RBP: 0xffffff80f546bd70, RSI: 0x000000000000002c, RDI: 0xffffff80f546bdb0
R8: 0x000000000000001f, R9: 0x00000000000003ff, R10: 0xffffffffffffffff, R11: 0x00000000ffffffff
R12: 0xffffff802a9a6a20, R13: 0x0000000000000001, R14: 0x0000000000000070, R15: 0x0000000000040000
RFL: 0x0000000000010216, RIP: 0xffffff80036102b1, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x0000000000040001, Error code: 0x0000000000000000, Fault CPU: 0x2
Backtrace (CPU 2), Frame : Return Address
0xffffff80f546b9d0 : 0xffffff800361d626
0xffffff80f546ba40 : 0xffffff80036b7e95
0xffffff80f546bc10 : 0xffffff80036cd4dd
0xffffff80f546bc30 : 0xffffff80036102b1
0xffffff80f546bd70 : 0xffffff8003620dc4
0xffffff80f546bda0 : 0xffffff800364f0c1
0xffffff80f546bde0 : 0xffffff8003616786
0xffffff80f546be50 : 0xffffff800361831c
0xffffff80f546be90 : 0xffffff8003635a40
0xffffff80f546bed0 : 0xffffff80039556a7
0xffffff80f546bf40 : 0xffffff8003955449
0xffffff80f546bf50 : 0xffffff80039e063a
0xffffff80f546bfb0 : 0xffffff80036cdd23
BSD process name corresponding to current thread: ubd
Mac OS version:
12D78
Kernel version:
Darwin Kernel Version 12.3.0: Sun Jan 6 22:37:10 PST 2013; root:xnu-2050.22.13~1/RELEASE_X86_64
Kernel UUID: 3EB7D8A7-C2D3-32EC-80F4-AB37D61492C6
Kernel slide:   �... [Show more]
Read other 15 answers

The bell that goes off when you tap the microphone on and off in iOS7 is very loud. Can it be turned down or off?

The bell that goes off when you tap the microphone on and off in iOS7 is very loud. Can it be turned down or off?

Hey, the name of that tone is Sonar. If you are using iOS 7.1, its under Ringtones>Classic>Sonar.

How do you scroll up albums in iTunes 11? There isn't a scroll bar on the right side. I know it appears when you minimize the screen, but it is hidden on my machine. Running Dell XPS 15z i7 w/ Win 7.

In iTunes 11, there is no scroll bar in full page Albums view. It does appear when you minimize the screen, but on my computer, the scroll is hidden and the resizing of the screen does not work. Is there a fix? Also, how do you sort tracks/songs in Album view? When I import lengthy audiobooks, the inability to sort through hundreds of tracks is really ticking me off. Again, is there a fix?
Apple... Before you tell me all the great features in iTunes 11, let me just say they are duly noted. But, I would rather have the option to do things on my own, rather than being forced to conform to your techies need to be creative. I don't use Genius or Playlists, so the ability to sort in them is useless to me.

It's been many, many years since I don't do dual boot anymore. Don't find the reason to do it, either. Different kinds of virtualization should be enough. Anyway...
dfw1417 wrote:
It took over 2 days to figure out how to adjust the bios to get my win 7 pro DVD to boot and install dual boot on this GREAT MACHINE!!
ENJOY! This is the BEST machine I ever had!
WHICH machine?
Cheers.
If I helped you, please give me some kudos! ^^

Please help. My Adobe InDesign document keeps crashing when I adjust the screen resolution to High in the View menu. Desperately trying to get my magazines prepared for press today! HELP!

Please help. My Adobe InDesign document keeps crashing when I adjust the screen resolution to High in the View menu. Desperately trying to get my magazines prepared for press today! HELP!
My magazine last month is still working ok - but this month's version has just started crashing for some reason.

We can't know. You have not provided any system info, not told us what version of ID you use nor provided any specifics about the document like images, color profiles, fonts, paragraph styles and what have you...
Mylenium

Why does my ipod turn off when I dim the backlight?

why does my ipod turn off when I dim the backlight?

Probably because you do not have the headphones plugged all the way in. Make sure the plastic on the headphone jack is flush with the body of the Nano.
Incidentally, you are not running iOS 1.x

My 4th generation ipod touch is not turning off when i hold the wake button for few seconds the Voice Control Function Starts Automatically.Please help me to get out of this problem.

My 4th generation ipod touch is not turning off when i hold the wake button for few seconds the Voice Control Function Starts Automatically.Please help me to get out of this problem.

Sorry i mistakenly made this question. It was alright. No Problem At ALL

Can you turn off when safari saves the last webpage when you quit (IE. Command Q)

Hi guys.
I was hoping to find out if you can turn off safari saving the last page when you quit the application (Feature frfrom OS X Lion, also the same in iWork). I find this very annoying as I find it slows down my computer when i am trying to launch safari.
Thanks in advance.

System Preferences/General. There is a checkbox to enable/disable this behavior near the bottom of the window. Alternatives are: quit while holding the option key. Launch from dock while holding the shift key.
charlie

During phone calls the screen doent turn off, during phone calls the screen doesn't turn off

The phone screen doesnt turn off when i put it on my ear to make a phonecall

This may very well be an issue with the proximity sensor. Take it to an Apple Store; they'll be able to let you know for sure. But first, to rule out a software issue, try a reset: Hold the home and power buttons at the same time until the Apple boot logo appears.

Private browsing will not turn off when I press the button or use the hotkey.

When I try to turn off private browsing, using the button and the hotkey, it will not turn off. What is wrong?

Make sure that you not run Firefox in automatic [[Private Browsing]] mode.
You enter Private Browsing mode if you select: Tools > Options > Privacy > History: Firefox will: "Never Remember History"
To see all History settings, choose: Tools > Options > Privacy, choose the setting '''Firefox will: Use custom settings for history'''
UnCheck: [[ ] "Automatically start Firefox in a private browsing session"
See also [[Private Browsing|#Always_start_Firefox_in_a_private_browsing_session|Always start Firefox in a private browsing session]]

My MacBook Pro screen turns off when I open the lid!

This has been driving me nuts, and also apparently Apple as well.
When my MacBook Pro is connected to a power adapter, if I close the lid it sleeps like a good little Mac. When I open the lid, the display comes on instantly. Then after about a second, it goes black. The LED backlight turns off. I can get it to come on using either of two ways: 1) touch either of the brightness buttons, or 2) remove and replace the power connector.
Now, here is the weird part: it only seems to do it when I am logged in as me. If I login as guest, it doesn't happen. That would seem to imply it is something about my profile that causes it to happen. So I whacked ~/Library/Preferences and it still happened. So where is this particular bit of nastiness hiding?

OK, so I think I solved my issue. It was caused by the system not going to sleep (The screensaver thing was a dead end).
When I ran the console app pmset, I got something like this:
➜ ~ pmset -g assertions
12-06-29 9:11:06 AM EDT
Assertion status system-wide:
   PreventUserIdleDisplaySleep             0
   CPUBoundAssertion                       0
   DisableInflow                           0
   ChargeInhibit                           0
   PreventSystemSleep                      1
   PreventUserIdleSystemSleep              0
   ExternalMedia                           0
   DisableLowPowerBatteryWarnings          0
   EnableIdleSleep                         1
   NoRealPowerSources_debug                0
   UserIsActive                            0
   ApplePushServiceTask                    0
The process that was causing PreventSystemSleep to be 1 was "org.cups.cupsd" which is the print service. So I checked all my printers, one of them was "In Use". When I opened it, there weren't any jobs listed. I went through the options and selected Jobs > Show Everyone's Jobs and sure enough there was a job there. I deleted it and everything seems to work now.
The odd thing is that print job was probably from my other account which didn't seem to have this screen problem. Anyway, I hope this helps anyone out there....

What to do if you drop your Ipod and the top half of the screen is off and the ipod will no longer recognize your figure when you touch the screen

So I dropped my Ipod on the floor and the top half of the Ipod came off and the screen will not recognize my figure when I try to swipe it to unlock the screen what do I do. But keep in mind that I have no money to fix it so how do I get it to work again?

Likely because the drop broke something like the digitizer.
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Imac turns off when going to sleep

Hi,
My imac shutdowns and I need to manually turn it back on - it has happened a few times now when I put my computer to sleep. Anything I can do to stop this? Should I be contacting Apple? Is this a big issue? Thanks Bethany
Console messages from first time today:
10-11-27 8:52:14 AM com.apple.launchd[1] * launchd[1] has started up. *
10-11-27 8:52:45 AM com.apple.launchd.peruser.50187 (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
10-11-27 8:52:53 AM com.apple.WindowServer66 Sat Nov 27 08:52:53 bethany-padusenkos-iMac.local WindowServer66 <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
10-11-27 8:52:56 AM com.apple.launchd.peruser.50187 (com.apple.Kerberos.renew.plist107) Exited with exit code: 1
10-11-27 8:53:00 AM com.apple.launchd.peruser.50187 ([email protected]) Exited with exit code: 1
Console message from second time that it turned off today:
10-11-27 1:50:32 PM com.apple.launchd[1] * launchd[1] has started up. *
10-11-27 1:50:56 PM com.apple.launchd.peruser.501[93] (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
10-11-27 1:51:00 PM com.apple.launchd.peruser.501[93] (com.apple.Kerberos.renew.plist[121]) Exited with exit code: 1

If the computer successfully goes to sleep/wake, it will post lines in console like this:
Nov 28 18:56:47 computername kernel[0]: System Sleep
Nov 28 18:56:53 computername kernel[0]: System Wake
Do you get any lines like these around the time it happens?
Also, resetting the SMC might be a good thing to try:
support.apple.com/kb/ht3964

HT201269 I have an IPhone 4 that turns off.When I plug the phone into a outlet, it says to connect to iTunes. But my phone doesn't connect. I need to backup info to sync to a new iPhone. Is there another way to get the info from the old one?

I have an IPhone 4 that turns off on its own. When I plug the phone into an outlet, it says to connect to iTunes. When i connect my phone to itunes, the screen displays the apple icon and doesn't connect to iTunes. I need to backup info on this phone so I can apply my back up to a new iPhone. Is there any another way i can do this? My older phone will not show it's connected to iTunes. I used iCloud on the phone with problems, but I didn't back up all the info thru iCloud. Is there another way to back up?

Sounds like your phone is in recovery mode. In this case, all data on it is gone. There's nothing to back up.

TS4009 Ipad mini message " Not enough Storage" This ipad cannot be backed up because there is not enough storage. problem is that the screen is frozen and has been for days. Will not even allow me to turn off device or slide the screen open not matter wha

Ipad mini screen is frozen. Message says Not Enough Storage. Cannot be backed up ect. problem is I can not enter settings to manage storage or even turn the device off. the screen is frozen and will not allow me to do anything. Anyone got any ideas?

OMG!! Thank you, Thank you, Thank you! I did what you suggested and it worked! I know nothing about this stuff. You made my day!

IMac turns-off when you adjust the screen

Similar Messages

Maybe you are looking for