IMac wakes on its own after putting it to sleep

Just got my iMac back from the shop with a new hard drive put in. After setting it up, it seems to wake from sleep on its own after a few minutes. Only change since before sending it in to be fixed (when i had no issues with sleep) is that I now have it set up to access the internet thru a wireless router. Could that cause the waking up? should i try turning Airport off before sleeping to see if that works?
Thanks

I'm kind of out of ideas, for now.
Have you tried to repair permissions/disk? I'm not exactly sure how your system is set up, but your wireless internet shouldn't be to blame [in theory]. When you put your iMac to sleep, it should be turning off the AirPort card [along with various other components]. It would be a possibility that if you had your mac hooked in by ethernet and you had something like "Wake on ethernet ring" checked in System Prefs. [that your mac could randomly wake up].
I almost wonder if it's a firmware problem. Or maybe a problem with a Mac OS X update, I'm also contemplating that it could help to download a combined updater and try to install.
Hmmmm....
I'll think on it. I know there's some idea that I'm missing here which could help, but I just can't get it to come to mind.
-Ben

Similar Messages

  • Imac keeps restarting on its own after installing update X?

    Imac keeps restarting on its own after installing update X?

    What do you mean "update X"? What update are you referring to?

  • IMac shuts down after putting it to sleep

    Lately, my iMac G5 has been shutting down automatically after putting it to sleep. If I wake it up within a short period of time it is OK, but if I wait several minutes, it must be restarted.
    Did I accidentily change a setting? Or is it a problem with the hardware?
    Is there a setting I can check? I have tried to find one in Energy Saver and other places without success.
    Thanks,
    -tee

    Welcome to Discussions - Please tell us which model G5 iMac you have (iMac release dates).I don't think you changed anything, I would suggest that you reset the SMU and see if that helps.
    Please post back,
    Miriam

  • My imac reboots on its own from sleep at irregular intervals

    My imac reboots on its own from sleep at irregular intervals. Is this normal?  why does it do this, it didn't do it untill about six months ago. At least I didn't notice it. There is no power outage, not even a blip when it happens.

    im just as a starter as u in macs just so u know, i did that yesterday and it fixed my isight(it was showing black). ok u unplug ALL cables, usb etc etc everything from the imac and unplug the main power cord too for like half a minute and then replug everything in and thats it i believe

  • Hi I have Acrobat 8 and it keeps closing on its own after a few seconds. Any recommendations?

    Hi I have Acrobat 8 and it keeps closing on its own after a few seconds. Any recommendations?

    Hey Francisco,
    Please let me know what OS version are you using.
    Also, is there any specific error that you get.
    Hope to hear from you.
    Regards,
    Anubha

  • After downloading ios 8 on my i pad air 16 GB, my i pad keeps on restarting on its own after some time?  any idea how can it be rectified?

    after downloading ios 8 on my i pad air 16 GB, my i pad keeps on restarting on its own after some time?  any idea how can it be rectified?

    Please tell me that it has NEVER been jailbroke.  If it has not been jailbroke, here are some standard repair procedures:
    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow the on-screen directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here.  You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again.  Also, read this.

  • TS3048 Even after installing new batteries and switching it on my magic mouse does not work. Sometimes it works but switches off (indicator light goes off) on its own after a few minutes.

    Even after installing new batteries and switching it on my magic mouse does not work. Sometimes it works but switches off (indicator light goes off) on its own after a few minutes.

    Try resetting the PRAM and SMC.  Try making the device a favorite .
    Barry

  • MacPro Wakes on its own by the Kernal an hour & 40 mins after put to sleep

    Here's my console read out. I dont understand why the Kernal wakes my MacPro an hour and 40 mins after I put it to sleep and run all kinds of stuff. Geek Tools is just set to show the day and time. I have turned off wake from network activity. I also turn off my mouse as the mac is getting ready to go to sleep. I have a Wacom Tablet connect to my Apple Cinema Display but I cant imagine this being the reason for it to wake.
    Thoughts?
    3/23/11 5:01:27 PM kernel sleep
    3/23/11 5:01:27 PM GeekTool[244] Geeklet D214CE76-49E4-45D7-AC10-7E08CC38F2A0. Task already running (date +%I:%M:%S)
    3/23/11 6:49:04 PM GeekTool[244] Geeklet D214CE76-49E4-45D7-AC10-7E08CC38F2A0. Task already running (date +%I:%M:%S)
    3/23/11 6:49:04 PM kernel Wake reason = RTC
    3/23/11 6:49:04 PM kernel RTC: maintenance alarm 2011/3/23 22:49:02, sleep 2011/3/23 21:01:27
    3/23/11 6:49:04 PM kernel System Wake
    3/23/11 6:49:04 PM kernel /drv/ MacModule.cpp:261 powerStateWillChangeTo: flags=82 stateNumber=4
    3/23/11 6:49:04 PM kernel /drv/ MacModule.cpp:262 powerStateWillChangeTo: found flag=kIOPMPowerOn (2)
    3/23/11 6:49:04 PM kernel /drv/ MacModule.cpp:267 powerStateWillChangeTo: found flag=kIOPMRestartCapability (80)
    3/23/11 6:49:04 PM kernel /drv/ MacModule.cpp:261 powerStateDidChangeTo: flags=82 stateNumber=4
    3/23/11 6:49:04 PM kernel /drv/ MacModule.cpp:262 powerStateDidChangeTo: found flag=kIOPMPowerOn (2)
    3/23/11 6:49:04 PM kernel /drv/ MacModule.cpp:267 powerStateDidChangeTo: found flag=kIOPMRestartCapability (80)
    3/23/11 6:49:04 PM kernel Previous Sleep Cause: 5
    3/23/11 6:49:05 PM GeekTool[244] Geeklet D214CE76-49E4-45D7-AC10-7E08CC38F2A0. Task already running (date +%I:%M:%S)
    3/23/11 6:49:06 PM GeekTool[244] Geeklet D214CE76-49E4-45D7-AC10-7E08CC38F2A0. Task already running (date +%I:%M:%S)
    3/23/11 6:49:07 PM GeekTool[244] Geeklet D214CE76-49E4-45D7-AC10-7E08CC38F2A0. Task already running (date +%I:%M:%S)
    3/23/11 6:49:08 PM GeekTool[244] Geeklet D214CE76-49E4-45D7-AC10-7E08CC38F2A0. Task already running (date +%I:%M:%S)
    3/23/11 6:49:09 PM GeekTool[244] Geeklet D214CE76-49E4-45D7-AC10-7E08CC38F2A0. Task already running (date +%I:%M:%S)
    3/23/11 6:49:10 PM GeekTool[244] Geeklet D214CE76-49E4-45D7-AC10-7E08CC38F2A0. Task already running (date +%I:%M:%S)
    3/23/11 6:49:11 PM GeekTool[244] Geeklet D214CE76-49E4-45D7-AC10-7E08CC38F2A0. Task already running (date +%I:%M:%S)
    3/23/11 6:49:12 PM kernel Ethernet [Intel8254x]: Link up on en0, 100-Megabit, Full-duplex, Symmetric flow-control, Debug [792d,6f48,0de1,0e00,45e1,4000]
    3/23/11 6:49:12 PM Apple80211 framework[196] ACInterfaceGetPower called with NULL interface
    3/23/11 6:49:12 PM Apple80211 framework[196] ACInterfaceGetPower called with NULL interface
    3/23/11 6:49:12 PM configd[14] network configuration changed.
    3/23/11 6:49:13 PM Apple80211 framework[196] ACInterfaceGetPower called with NULL interface
    3/23/11 6:49:21 PM kernel hibernate image path: /var/vm/sleepimage
    3/23/11 6:49:21 PM kernel sizeof(IOHibernateImageHeader) == 512
    3/23/11 6:49:21 PM kernel Opened file /var/vm/sleepimage, size 8589934592, partition base 0xc805000, maxio 400000 ssd 0
    3/23/11 6:49:21 PM kernel hibernate image major 14, minor 3, blocksize 512, pollers 5
    3/23/11 6:49:21 PM kernel hibernateallocpages flags 00000000, gobbling 0 pages
    3/23/11 6:49:21 PM kernel hibernate_setup(0) took 0 ms
    3/23/11 6:49:21 PM kernel /drv/ MacModule.cpp:261 powerStateWillChangeTo: flags=4 stateNumber=2
    3/23/11 6:49:21 PM kernel /drv/ MacModule.cpp:266 powerStateWillChangeTo: found flag=kIOPMSleepCapability (4)
    3/23/11 6:49:21 PM kernel /drv/ MacModule.cpp:261 powerStateDidChangeTo: flags=4 stateNumber=2
    3/23/11 6:49:21 PM kernel /drv/ MacModule.cpp:266 powerStateDidChangeTo: found flag=kIOPMSleepCapability (4)
    3/23/11 6:49:21 PM kernel System SafeSleep
    3/23/11 6:49:25 PM ntpd[41] sendto(17.151.16.23) (fd=26): Network is down
    3/23/11 6:49:25 PM com.apple.FontWorker[33433] RMNewMappedRefFromMappedFork for "/Users/•••/Library/Fonts/CY APC Courier" returned error -199(0x0)
    3/23/11 6:49:25 PM com.apple.FontWorker[33433] RMNewMappedRefFromMappedFork for "/Users/•••/Library/Fonts/Geneva" returned error -199(0x0)
    3/23/11 6:49:25 PM com.apple.FontWorker[33433] RMNewMappedRefFromMappedFork for "/Users/•••/Library/Fonts/GrTimes" returned error -199(0x0)
    3/23/11 6:49:25 PM com.apple.FontWorker[33433] RMNewMappedRefFromMappedFork for "/Users/•••/Library/Fonts/Courier TU" returned error -199(0x0)
    3/23/11 6:49:25 PM com.apple.FontWorker[33433] RMNewMappedRefFromMappedFork for "/Users/•••/Library/Fonts/CY APC Courier" returned error -199(0x0)
    3/23/11 6:49:25 PM com.apple.FontWorker[33433] RMNewMappedRefFromMappedFork for "/Users/•••/Library/Fonts/Geneva" returned error -199(0x0)
    3/23/11 6:49:25 PM com.apple.FontWorker[33433] RMNewMappedRefFromMappedFork for "/Users/•••/Library/Fonts/GrTimes" returned error -199(0x0)
    3/23/11 6:49:25 PM com.apple.FontWorker[33433] RMNewMappedRefFromMappedFork for "/Users/•••/Library/Fonts/Courier TU" returned error -199(0x0)
    3/23/11 6:49:25 PM com.apple.FontWorker[33433] RMNewMappedRefFromMappedFork for "/Users/•••/Library/Fonts/CY APC Courier" returned error -199(0x0)
    3/23/11 6:49:25 PM com.apple.FontWorker[33433] RMNewMappedRefFromMappedFork for "/Users/•••/Library/Fonts/Geneva" returned error -199(0x0)
    3/23/11 6:49:25 PM com.apple.FontWorker[33433] RMNewMappedRefFromMappedFork for "/Users/•••/Library/Fonts/GrTimes" returned error -199(0x0)
    3/23/11 6:49:25 PM com.apple.FontWorker[33433] RMNewMappedRefFromMappedFork for "/Users/•••/Library/Fonts/Courier TU" returned error -199(0x0)
    3/23/11 6:49:25 PM Apple80211 framework[196] ACInterfaceGetPower called with NULL interface
    3/23/11 6:49:25 PM configd[14] network configuration changed.
    3/23/11 6:49:25 PM Apple80211 framework[196] ACInterfaceGetPower called with NULL interface
    3/23/11 6:49:39 PM kernel hibernatepage_listsetall start 0x6d2c1000, 0x6d48d000
    3/23/11 6:49:39 PM kernel hibernatepage_listsetall time: 470 ms
    3/23/11 6:49:39 PM kernel pages 1123182, wire 140532, act 189640, inact 101, spec 16, zf 0, throt 0, could discard act 63508 inact 339669 purgeable 15233 spec 374483
    3/23/11 6:49:39 PM kernel hibernatepage_listsetall found pageCount 330289
    3/23/11 6:49:39 PM kernel IOHibernatePollerOpen, mlget_interruptsenabled 0
    3/23/11 6:49:39 PM kernel IOHibernatePollerOpen(0)
    3/23/11 6:49:39 PM kernel writing 330077 pages
    3/23/11 6:49:39 PM kernel encryptEnd d3ed8b0
    3/23/11 6:49:39 PM kernel image1Size 444112896, encryptStart1 0, End1 d3ed8b0
    3/23/11 6:49:39 PM kernel encryptEnd 2ffce550
    3/23/11 6:49:39 PM kernel PMStats: Hibernate write took 10006 ms
    3/23/11 6:49:39 PM kernel all time: 10006 ms, comp time: 2693 ms, deco time: 0 ms,
    3/23/11 6:49:39 PM kernel image 805103104, uncompressed 1927344128 (470543), compressed 800601096 (41%), sum1 8d13bd3e, sum2 50bcbcbd
    3/23/11 6:49:39 PM kernel wiredpagesencrypted 140393, wiredpagesclear 140393, dirtypagesencrypted 189757
    3/23/11 6:49:39 PM kernel hibernatewriteimage done(0)
    3/23/11 6:49:39 PM kernel sleep
    3/23/11 6:49:39 PM ntpd[41] sendto(17.151.16.23) (fd=26): Can't assign requested address
    3/23/11 8:37:22 PM GeekTool[244] Geeklet D214CE76-49E4-45D7-AC10-7E08CC38F2A0. Task already running (date +%I:%M:%S)
    3/23/11 8:37:22 PM kernel Wake reason = RTC
    3/23/11 8:37:22 PM kernel RTC: maintenance alarm 2011/3/24 00:37:20, sleep 2011/3/23 22:49:40
    3/23/11 8:37:22 PM kernel System Wake
    3/23/11 8:37:22 PM kernel /drv/ MacModule.cpp:261 powerStateWillChangeTo: flags=82 stateNumber=4
    3/23/11 8:37:22 PM kernel /drv/ MacModule.cpp:262 powerStateWillChangeTo: found flag=kIOPMPowerOn (2)
    3/23/11 8:37:22 PM kernel /drv/ MacModule.cpp:267 powerStateWillChangeTo: found flag=kIOPMRestartCapability (80)
    3/23/11 8:37:22 PM kernel /drv/ MacModule.cpp:261 powerStateDidChangeTo: flags=82 stateNumber=4
    3/23/11 8:37:22 PM kernel /drv/ MacModule.cpp:262 powerStateDidChangeTo: found flag=kIOPMPowerOn (2)
    3/23/11 8:37:22 PM kernel /drv/ MacModule.cpp:267 powerStateDidChangeTo: found flag=kIOPMRestartCapability (80)
    3/23/11 8:37:22 PM kernel Previous Sleep Cause: 5
    3/23/11 8:37:23 PM GeekTool[244] Geeklet D214CE76-49E4-45D7-AC10-7E08CC38F2A0. Task already running (date +%I:%M:%S)
    3/23/11 8:37:23 PM ntpd[41] sendto(17.151.16.23) (fd=24): No route to host
    3/23/11 8:37:24 PM GeekTool[244] Geeklet D214CE76-49E4-45D7-AC10-7E08CC38F2A0. Task already running (date +%I:%M:%S)
    3/23/11 8:37:25 PM GeekTool[244] Geeklet D214CE76-49E4-45D7-AC10-7E08CC38F2A0. Task already running (date +%I:%M:%S)
    3/23/11 8:37:26 PM GeekTool[244] Geeklet D214CE76-49E4-45D7-AC10-7E08CC38F2A0. Task already running (date +%I:%M:%S)
    3/23/11 8:37:27 PM GeekTool[244] Geeklet D214CE76-49E4-45D7-AC10-7E08CC38F2A0. Task already running (date +%I:%M:%S)
    3/23/11 8:37:28 PM GeekTool[244] Geeklet D214CE76-49E4-45D7-AC10-7E08CC38F2A0. Task already running (date +%I:%M:%S)
    3/23/11 8:37:29 PM GeekTool[244] Geeklet D214CE76-49E4-45D7-AC10-7E08CC38F2A0. Task already running (date +%I:%M:%S)
    3/23/11 8:37:29 PM kernel Ethernet [Intel8254x]: Link up on en0, 100-Megabit, Full-duplex, Symmetric flow-control, Debug [792d,6f48,0de1,0e00,45e1,4000]
    3/23/11 8:37:29 PM Apple80211 framework[196] ACInterfaceGetPower called with NULL interface
    3/23/11 8:37:29 PM Apple80211 framework[196] ACInterfaceGetPower called with NULL interface
    3/23/11 8:37:29 PM configd[14] network configuration changed.
    3/23/11 8:37:30 PM kernel IOPMrootDomain: idle revert
    3/23/11 8:37:30 PM Apple80211 framework[196] ACInterfaceGetPower called with NULL interface
    3/23/11 8:37:30 PM configd[14] network configuration changed.
    3/23/11 8:37:30 PM Apple80211 framework[196] ACInterfaceGetPower called with NULL interface
    3/23/11 8:37:30 PM Apple80211 framework[196] ACInterfaceGetPower called with NULL interface
    3/23/11 8:37:30 PM Apple80211 framework[196] ACInterfaceGetPower called with NULL interface
    3/23/11 8:37:30 PM configd[14] network configuration changed.
    3/23/11 8:37:30 PM mDNSResponder[18] RegisterInterface: Frequent transitions for interface en0 (10.0.1.18)
    3/23/11 8:37:31 PM LogMeInGUI[217] remoteControl:INACTIVE
    3/23/11 8:37:31 PM LogMeInGUI[217] processLine:ACCESSMASK: 18446743936270597119
    3/23/11 8:37:33 PM prl_naptd[150] Reloading configuration...
    3/23/11 8:37:33 PM prl_naptd[150] vnic0: DHCP/NAT for 01.211.45.1-10.211.55.254 netmask 255.255.255.0
    3/23/11 8:37:33 PM prl_naptd[150] vnic1: DHCP for 01.17.129.1-10.37.129.254 netmask 255.255.255.0
    3/23/11 8:37:33 PM kernel R-state changed 2->0
    3/23/11 8:37:41 PM com.apple.FontWorker[33543] RMNewMappedRefFromMappedFork for "/Users/•••/Library/Fonts/CY APC Courier" returned error -199(0x0)
    3/23/11 8:37:41 PM com.apple.FontWorker[33543] RMNewMappedRefFromMappedFork for "/Users/•••/Library/Fonts/Geneva" returned error -199(0x0)
    3/23/11 8:37:41 PM com.apple.FontWorker[33543] RMNewMappedRefFromMappedFork for "/Users/•••/Library/Fonts/GrTimes" returned error -199(0x0)
    3/23/11 8:37:41 PM com.apple.FontWorker[33543] RMNewMappedRefFromMappedFork for "/Users/•••/Library/Fonts/Courier TU" returned error -199(0x0)
    3/23/11 8:37:41 PM com.apple.FontWorker[33543] RMNewMappedRefFromMappedFork for "/Users/•••/Library/Fonts/CY APC Courier" returned error -199(0x0)
    3/23/11 8:37:41 PM com.apple.FontWorker[33543] RMNewMappedRefFromMappedFork for "/Users/•••/Library/Fonts/Geneva" returned error -199(0x0)
    3/23/11 8:37:41 PM com.apple.FontWorker[33543] RMNewMappedRefFromMappedFork for "/Users/•••/Library/Fonts/GrTimes" returned error -199(0x0)
    3/23/11 8:37:41 PM com.apple.FontWorker[33543] RMNewMappedRefFromMappedFork for "/Users/•••/Library/Fonts/Courier TU" returned error -199(0x0)
    3/23/11 8:37:41 PM com.apple.FontWorker[33543] RMNewMappedRefFromMappedFork for "/Users/•••/Library/Fonts/CY APC Courier" returned error -199(0x0)
    3/23/11 8:37:41 PM com.apple.FontWorker[33543] RMNewMappedRefFromMappedFork for "/Users/•••/Library/Fonts/Geneva" returned error -199(0x0)
    3/23/11 8:37:41 PM com.apple.FontWorker[33543] RMNewMappedRefFromMappedFork for "/Users/•••/Library/Fonts/GrTimes" returned error -199(0x0)
    3/23/11 8:37:41 PM com.apple.FontWorker[33543] RMNewMappedRefFromMappedFork for "/Users/•••/Library/Fonts/Courier TU" returned error -199(0x0)
    3/23/11 8:37:41 PM com.apple.FontWorker[33543] RMNewMappedRefFromMappedFork for "/Users/•••/Library/Fonts/CY APC Courier" returned error -199(0x0)
    3/23/11 8:37:41 PM com.apple.FontWorker[33543] RMNewMappedRefFromMappedFork for "/Users/•••/Library/Fonts/Geneva" returned error -199(0x0)
    3/23/11 8:37:41 PM com.apple.FontWorker[33543] RMNewMappedRefFromMappedFork for "/Users/•••/Library/Fonts/GrTimes" returned error -199(0x0)
    3/23/11 8:37:41 PM com.apple.FontWorker[33543] RMNewMappedRefFromMappedFork for "/Users/•••/Library/Fonts/Courier TU" returned error -199(0x0)
    3/23/11 8:37:41 PM com.apple.FontWorker[33543] RMNewMappedRefFromMappedFork for "/Users/•••/Library/Fonts/CY APC Courier" returned error -199(0x0)
    3/23/11 8:37:41 PM com.apple.FontWorker[33543] RMNewMappedRefFromMappedFork for "/Users/•••/Library/Fonts/Geneva" returned error -199(0x0)
    3/23/11 8:37:41 PM com.apple.FontWorker[33543] RMNewMappedRefFromMappedFork for "/Users/•••/Library/Fonts/GrTimes" returned error -199(0x0)
    3/23/11 8:37:41 PM com.apple.FontWorker[33543] RMNewMappedRefFromMappedFork for "/Users/•••/Library/Fonts/Courier TU" returned error -199(0x0)
    3/23/11 8:37:41 PM com.apple.FontWorker[33543] RMNewMappedRefFromMappedFork for "/Users/•••/Library/Fonts/CY APC Courier" returned error -199(0x0)
    3/23/11 8:37:41 PM com.apple.FontWorker[33543] RMNewMappedRefFromMappedFork for "/Users/•••/Library/Fonts/Geneva" returned error -199(0x0)
    3/23/11 8:37:41 PM com.apple.FontWorker[33543] RMNewMappedRefFromMappedFork for "/Users/•••/Library/Fonts/GrTimes" returned error -199(0x0)
    3/23/11 8:37:41 PM com.apple.FontWorker[33543] RMNewMappedRefFromMappedFork for "/Users/•••/Library/Fonts/Courier TU" returned error -199(0x0)
    3/23/11 8:37:48 PM ntpd[41] time reset +0.545898 s
    3/23/11 8:38:11 PM com.apple.FontWorker[33795] RMNewMappedRefFromMappedFork for "/Users/•••/Library/Fonts/CY APC Courier" returned error -199(0x0)
    3/23/11 8:38:11 PM com.apple.FontWorker[33795] RMNewMappedRefFromMappedFork for "/Users/•••/Library/Fonts/Geneva" returned error -199(0x0)
    3/23/11 8:38:11 PM com.apple.FontWorker[33795] RMNewMappedRefFromMappedFork for "/Users/•••/Library/Fonts/GrTimes" returned error -199(0x0)
    3/23/11 8:38:11 PM com.apple.FontWorker[33795] RMNewMappedRefFromMappedFork for "/Users/•••/Library/Fonts/Courier TU" returned error -199(0x0)
    3/23/11 8:38:11 PM com.apple.FontWorker[33795] RMNewMappedRefFromMappedFork for "/Users/•••/Library/Fonts/CY APC Courier" returned error -199(0x0)
    3/23/11 8:38:11 PM com.apple.FontWorker[33795] RMNewMappedRefFromMappedFork for "/Users/•••/Library/Fonts/Geneva" returned error -199(0x0)
    3/23/11 8:38:11 PM com.apple.FontWorker[33795] RMNewMappedRefFromMappedFork for "/Users/•••/Library/Fonts/GrTimes" returned error -199(0x0)
    3/23/11 8:38:11 PM com.apple.FontWorker[33795] RMNewMappedRefFromMappedFork for "/Users/•••/Library/Fonts/Courier TU" returned error -199(0x0)
    3/23/11 8:38:11 PM com.apple.FontWorker[33795] RMNewMappedRefFromMappedFork for "/Users/•••/Library/Fonts/CY APC Courier" returned error -199(0x0)
    3/23/11 8:38:11 PM com.apple.FontWorker[33795] RMNewMappedRefFromMappedFork for "/Users/•••/Library/Fonts/Geneva" returned error -199(0x0)
    3/23/11 8:38:11 PM com.apple.FontWorker[33795] RMNewMappedRefFromMappedFork for "/Users/•••/Library/Fonts/GrTimes" returned error -199(0x0)
    3/23/11 8:38:11 PM com.apple.FontWorker[33795] RMNewMappedRefFromMappedFork for "/Users/•••/Library/Fonts/Courier TU" returned error -199(0x0)
    3/23/11 8:45:56 PM [0x0-0xd00d0].com.apple.systemevents[36801] com.apple.FolderActions.enabled: Already loaded
    3/23/11 9:15:55 PM [0x0-0xd60d6].com.apple.systemevents[48107] com.apple.FolderActions.enabled: Already loaded
    3/23/11 9:45:55 PM [0x0-0xdf0df].com.apple.systemevents[59420] com.apple.FolderActions.enabled: Already loaded
    3/23/11 10:15:55 PM [0x0-0xe70e7].com.apple.systemevents[70738] com.apple.FolderActions.enabled: Already loaded
    3/23/11 10:45:55 PM [0x0-0xf00f0].com.apple.systemevents[82052] com.apple.FolderActions.enabled: Already loaded
    3/23/11 11:15:55 PM [0x0-0xf80f8].com.apple.systemevents[93362] com.apple.FolderActions.enabled: Already loaded
    3/23/11 11:45:55 PM [0x0-0x101101].com.apple.systemevents[4815] com.apple.FolderActions.enabled: Already loaded
    3/24/11 12:15:55 AM [0x0-0x109109].com.apple.systemevents[16122] com.apple.FolderActions.enabled: Already loaded
    3/24/11 12:45:55 AM [0x0-0x113113].com.apple.systemevents[27428] com.apple.FolderActions.enabled: Already loaded
    3/24/11 1:15:55 AM [0x0-0x11b11b].com.apple.systemevents[38733] com.apple.FolderActions.enabled: Already loaded
    3/24/11 1:45:55 AM [0x0-0x125125].com.apple.systemevents[50055] com.apple.FolderActions.enabled: Already loaded
    3/24/11 2:15:55 AM [0x0-0x12f12f].com.apple.systemevents[61368] com.apple.FolderActions.enabled: Already loaded
    3/24/11 2:45:55 AM [0x0-0x139139].com.apple.systemevents[72692] com.apple.FolderActions.enabled: Already loaded
    3/24/11 3:15:55 AM [0x0-0x142142].com.apple.systemevents[84065] com.apple.FolderActions.enabled: Already loaded
    3/24/11 3:45:55 AM [0x0-0x14b14b].com.apple.systemevents[95379] com.apple.FolderActions.enabled: Already loaded
    3/24/11 4:15:55 AM [0x0-0x153153].com.apple.systemevents[6821] com.apple.FolderActions.enabled: Already loaded
    3/24/11 4:45:55 AM [0x0-0x15c15c].com.apple.systemevents[18147] com.apple.FolderActions.enabled: Already loaded
    3/24/11 5:15:56 AM [0x0-0x164164].com.apple.systemevents[29426] com.apple.FolderActions.enabled: Already loaded
    3/24/11 5:45:56 AM [0x0-0x16d16d].com.apple.systemevents[40744] com.apple.FolderActions.enabled: Already loaded
    3/24/11 6:15:56 AM [0x0-0x175175].com.apple.systemevents[52040] com.apple.FolderActions.enabled: Already loaded
    3/24/11 6:45:56 AM [0x0-0x17e17e].com.apple.systemevents[63345] com.apple.FolderActions.enabled: Already loaded
    3/24/11 7:15:56 AM [0x0-0x186186].com.apple.systemevents[74655] com.apple.FolderActions.enabled: Already loaded
    3/24/11 7:45:56 AM [0x0-0x18f18f].com.apple.systemevents[85977] com.apple.FolderActions.enabled: Already loaded
    3/24/11 8:15:56 AM [0x0-0x197197].com.apple.systemevents[97287] com.apple.FolderActions.enabled: Already loaded
    3/24/11 8:37:32 AM Apple80211 framework[196] ACInterfaceGetPower called with NULL interface
    3/24/11 8:45:56 AM [0x0-0x1a21a2].com.apple.systemevents[8714] com.apple.FolderActions.enabled: Already loaded
    3/24/11 9:15:56 AM [0x0-0x1aa1aa].com.apple.systemevents[20023] com.apple.FolderActions.enabled: Already loaded
    3/24/11 9:45:56 AM [0x0-0x1b31b3].com.apple.systemevents[31344] com.apple.FolderActions.enabled: Already loaded
    3/24/11 10:15:56 AM [0x0-0x1bb1bb].com.apple.systemevents[42647] com.apple.FolderActions.enabled: Already loaded
    3/24/11 10:45:56 AM [0x0-0x1c41c4].com.apple.systemevents[53960] com.apple.FolderActions.enabled: Already loaded

    http://www.macworld.com/article/153720/2010/08/macpro_sleep.html

  • Thinkpad Yoga wakes up on its own after going to sleep blaming lid if wifi was enabled

    Recently I've noticed that my Thinkpad Yoga (20CD00B1US) keeps waking up on its own.
    powercfg lastwake returns
    Wake History Count - 1
    Wake History [0]
    Wake Source Count - 1
    Wake Source [0]
    Type: Device
    Instance Path: ACPI\PNP0C0D\2&daba3ff&2
    Friendly Name:
    Description: ACPI Lid
    Manufacturer: (Standard system devices)
     It happens either if lid was kept open and I used power button to put it to sleep or if I just close the lid. As soon as I do that I can see red LED goes on and off slowly so I know it is sleeping. However within 5 minutes or less, I see that red LED on top of "i" constantly lit.
    If I do powercfg -devicequery wake_armed , I get
    Intel(R) Dual Band Wireless-AC 7260
    That is really odd. I have WPA2 (PSK) wireless network, and I'm confident other devices are not that smart to send any WOL packets (or whatever it is called for wireless). Also I have AMT and other stuff disabled in BIOS. Intel Smart Connect has Remote Wake set to OFF, Keep Data Fresh is OFF as well. The problem goes away if I turn flight mode (turn off wifi) before sending PC to sleep.
    Does anybody else experience similar behavior and what can I do to prevent waking it up without flipping wifi switch? It is so strange that the lid is at blame while the problem is somehow related to wireless adapter.
    P.S. Installed BIOS version is 1.05 (not the latest 1.06). All essential updates are installed.
    Solved!
    Go to Solution.

    You may wish to check the WNIC's properties in Device Manager to see if Allow this device to wake the computer under Power Management is selected. If so, deselect to see if your issue is resolved.
    Regards.
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество
    Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
    PM requests for individual support are not answered. If a post solves your issue, please mark it so.
    X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
    I am not a Lenovo employee.

  • Imac reboots on its own

    I have a 20 inch Imac Intel. I have had the logic board and airport card replaced. Every day before and after the repairs my computer will reboot on its own. Steps I have taken so far:
    1. PRAM resets
    2. Testing Via TechTool (Came back fine)
    3. Deleted Powermanagment in System Preference.
    I have memory from Other Computer World installed. When I ran the tests from TechTool it said the memory was fine. I was wondering if anyone else's IMAC does this. If it does how did they fix it
    Imac Intel 20" 2 GB Ram   Mac OS X (10.4.8)  

    im just as a starter as u in macs just so u know, i did that yesterday and it fixed my isight(it was showing black). ok u unplug ALL cables, usb etc etc everything from the imac and unplug the main power cord too for like half a minute and then replug everything in and thats it i believe

  • My imac turns it self back on almost immediately after putting it to sleep.  Why and how do I fix it?

    This is new as of a few days ago.  I can't find anything in preferences to make it better nor did I change any setting.  Not sure what's going on.  The computer seems to be working fine except for that.

    It's not supposed to do that, so there is no setting for it.  Be sure you have shut down (powered off) the Mac and started it back up, if you have not since this problem occurred. 
    If you are manually putting it to sleep, make sure you are not "bumping" the mouse immediately after giving the Sleep command.  Also, does this happen when the Mac goes to sleep due to timed inactivity?
    Resetting the PRAM may help
    http://support.apple.com/kb/ht1379
    It may also help to reset "power management," which is called PMU, SMU, SMC, and other things depending on Mac model.  The reset procedure depends on iMac model.  If you can post back with the specific iMac model, I can link to the correct procedure.  This is a list of all iMac models
    http://www.everymac.com/systems/apple/imac/index-imac.html
    A faulty USB device can cause this behavior.  You can try disconnecting all USB devices including hubs, except for standard mouse and keyboard (if used).  See if the problem recurs.

  • My iPad randomly becomes blue and switches off and switches on its own after downloading installing iOS 8"" is it happening to any one else ?

    Mine is a iPad mini with retina display second generation...and its bn just 2 months i bought my iPad...initially when I updated to iOS 7 , had downloading app issues...now after installing iOS 8 , iPad randomly becomes blue when Ian browsing or checking something online and switches off ,and later switches on its own...it's frustrating...plz help

    Hello Drvsowlaks,
    Thanks for using Apple Support Communities.
    To isolate and troubleshoot this issue I'd like you to first reset your iPad by following the steps in the article below.
    Turn your iOS device off and on (restart) and reset
    If the issue persists, please back up your iPad, and then restore it to its factory defaults.
    Use iTunes to restore your iOS device to factory settings
    Take care,
    Alex H.

  • "Terminal" opens on its own after starting my MBP

    First of all, I'd like to apologize for my english...
    I have a problem since 2 weeks ago. Everytime I start my mac, a Terminal's window opens on its own, and the next sequence of commands starts to execute in themselves:
    Last login: Mon Jun 8 00:18:46 on console
    /System/Library/Frameworks/JavaVM.framework/Versions/A/Commands/java ; exit;
    MBP:~ miguelgonzalezherranz$ /System/Library/Frameworks/JavaVM.framework/Versions/A/Commands/java ; exit;
    Usage: java [-options] class [args...]
    (to execute a class)
    or java [-options] -jar jarfile [args...]
    (to execute a jar file)
    where options include:
    -d32 use a 32-bit data model if available
    -d64 use a 64-bit data model if available (implies -server, only for x86_64)
    -client to select the "client" VM
    -server to select the "server" VM
    -jvm is a synonym for the "client" VM [deprecated]
    -hotspot is a synonym for the "client" VM [deprecated]
    The default VM is client.
    -cp <class search path of directories and zip/jar files>
    -classpath <class search path of directories and zip/jar files>
    A : separated list of directories, JAR archives,
    and ZIP archives to search for class files.
    -D<name>=<value>
    set a system property
    -verbose[:class|gc|jni]
    enable verbose output
    -version print product version and exit
    -version:<value>
    require the specified version to run
    -showversion print product version and continue
    -jre-restrict-search | -jre-no-restrict-search
    include/exclude user private JREs in the version search
    -? -help print this help message
    -X print help on non-standard options
    -ea[:<packagename>...|:<classname>]
    -enableassertions[:<packagename>...|:<classname>]
    enable assertions
    -da[:<packagename>...|:<classname>]
    -disableassertions[:<packagename>...|:<classname>]
    disable assertions
    -esa | -enablesystemassertions
    enable system assertions
    -dsa | -disablesystemassertions
    disable system assertions
    -agentlib:<libname>[=<options>]
    load native agent library <libname>, e.g. -agentlib:hprof
    see also, -agentlib:jdwp=help and -agentlib:hprof=help
    -agentpath:<pathname>[=<options>]
    load native agent library by full pathname
    -javaagent:<jarpath>[=<options>]
    load Java programming language agent, see java.lang.instrument
    logout
    [Proceso completado]
    I've no idea of the cause of this problem, but i'm really scared about the possibility of being a virus, so I'd be very grateful if you give a hand with it.
    Thank you very much

    Hello MIke:
    Welcome to Apple discussions.
    No need to apologize. My English, at times, is not very good and it is my native tongue!
    First, there are NO viruses that affect a Mac running OS X - none.
    Open system preferences>accounts>log in items. See if "terminal" appears there (probably not).
    I suspect this article will help yoiu solve the problem:
    http://support.apple.com/kb/TS2304
    Barry

  • Recurring Instances not scheduling on its own after the SP4 installation

    Hi,
    We have installed the BO XI R2  SP4 2 days ago. Some of the recurring instances are not scheduling on its own.
    Environment : Clustered - 3 servers with CMS running on 2 servers.
    We did not do the install live. We disabled/stopped all the services befor the install.
    Help needed urgently.
    Thanks

    Hello Pankaj,
    I recommend to post this query to the [BusinessObjects Enterprise Administration|BI Platform; forum.
    This forum is dedicated to topics related to administration and configuration of BusinessObjects Enterprise, BusinessObjects Edge, and Crystal Reports Server.
    It is monitored by qualified technicians and you will get a faster response there.
    Also, all BOE Administration queries remain in one place and thus can be easily searched in one place.
    Best regards,
    Falk

  • Will CUCM reboot on its own after installing ciscocm.refresh_upgrade_v1.1.cop.sgn

    I'm upgrading a server to 8.6 and i've installed ciscocm.refresh_upgrade_v1.1.cop.sgn.
    These were the last couple lines from the console:
    02/23/2012 23:08:48  killing copstart.sh pid=31809
    02/23/2012 23:08:48  Waiting for CLI/GUI to show cop install success before terminating all CLI/GUI sessions
    02/23/2012 23:08:48
    SUCCESS: Successful install of refresh_upgrade_v1.1. All GUI and CLI sessions will terminate shortly.  Tomcat will be restarted, which can take several minutes.
    02/23/2012 23:08:48
    Successfully installed ciscocm.refresh_upgrade_v1.1.cop.sgn
    A system reboot is required when the upgrade process completes or is canceled.  This will ensure services affected by the upgrade process are functioning properly.
    admin:
    Broadcast message from root (Thu Feb 23 23:09:04 2012):
    *** Warning: Terminating all CLI sessions NOW ***
    Will the server reboot on its own, or do I need to manually initiate a restart myself?

    Hi Michael,
    Aaron is most correct here (No doubt +5)
    The final reference you are seeing via the cli output;
    A system reboot is required when the upgrade process completes or is canceled.  This will ensure services affected by the upgrade process are functioning properly.
    is in relation to the actual 8.6 upgrade process, not the refresh.cop
    The details are in this great doc from Ryan;
    https://supportforums.cisco.com/docs/DOC-16898
    Cheers!
    Rob

Maybe you are looking for

  • Month view in smart form depending on date

    if the date is 01.01.08 I want it to display as 01 Jan 08..?and if is 02.02.08 I want it as 02 Feb 08.. How to resolve this in smart form field..? let me know.. Thanks,

  • System status report

    Hi,         I have made technically completed  more than 15 sale orders.Any standard report to view the date wise status? Regards, Murugu

  • 4x NVIDIA GeForce 7300 GT cards in a Mac Pro run below max supported speed

    Hi, We have 4 "identical" NVIDIA GeForce 7300 GT 256MB cards in one Mac Pro (to support 8 DVI monitors for a Network Operations Center). One card came with the system, the other cards were purchased from Apple at the same time. This was a refurbished

  • Ftp URL, j2re1.3.1 versus j2re1.4.1

    Hello everybody I have a client application running on a PC, OS win2k, which regularly uses an ftp URL to download data files from a remote FTP server. There are two options for this, either through an Ethernet LAN or through slow modem connection (1

  • Logic Pro won't start anymore

    It's the latest Logic Pro 9.1.8 If i try to open any project I see the GUI for about three seconds but it's frozen. Then Logic crashes. If i open Logic without any project or with the audio engine disabled or with all AUs disabled makes no difference