IMac will no longer find my wireless network.

Hello, I have seen several posts for this on the net but no one seems to have a resolution. I have an iMac running OS X 10.6.3. I was not having any issues connecting to my personal WEP password protected network until just a few days ago. My computer does not list my network as an available option anymore and despite my best efforts I cannot get it to reappear. I have tried refreshing my IP address, removing preferred networks, deleting key chains and everything else I can think of. I had not changed any settings or downloaded any updates so I'm not sure why it suddenly stopped working. I have reset my router multiple times and even moved my computer so its right next to it and still nothing. Any suggestions would be great. It can find all of my neighbors networks just not mine. My roommate also runs a PC laptop and has no issues logging in.
Please help!!

Turn of the MG and unplug the power cord. Leave it off for about a minute and then reconnect the power cord and turn the power back on. Wait while the device attempts to reconnect to your wireless network - the blue wifi symbol on the MG will flash and then stay on once it has connected. If it keeps flashing then you will have to reconnect the MG to your wireless access point via the control panel on the MG.

Similar Messages

  • My new Canon Pixma 7250 wireless printer can no longer find my wireless network. My MAC is, Yosemite 10.10.2. I've run diagnostics and Canon LAN printer setup routine many time. Is there a solution? Can anyone help?

    My new Canon Pixma 7250 wireless printercan no longer find my wireless network. (It worked fine until recently) I have a Yosemite 10.10.2. I've run diagnostics and the Canon LAN printer setup routine many times. Is there a solution? Can anyone help?

    Turn of the MG and unplug the power cord. Leave it off for about a minute and then reconnect the power cord and turn the power back on. Wait while the device attempts to reconnect to your wireless network - the blue wifi symbol on the MG will flash and then stay on once it has connected. If it keeps flashing then you will have to reconnect the MG to your wireless access point via the control panel on the MG.

  • Apple devices will no longer recognize home wireless network

    After returning from a week's vacation, I am having difficulty getting my Apple devices (iPads, iPhones, MacBook Pros, etc.) to connect to our home wireless network. I have tried resetting the router and modem numerous times, restarting the devices, resetting the IP address on the MacBook Pro to no avail. At time I do show a connection to the network, however, I cannot access internet, email, etc. This problem also seems to be affecting ALL of our Apple devices, including the ones we left at home. The PC laptop connects just fine, so it does not seem to be a router issue.  Any thoughts?

    Have you called the ISP's tech support line and asked for help?

  • IMac will no longer connect to my Airport wireless network

    I set up a wireless network at home using Airport Express some time ago, but as of yesterday my iMac will no longer connect to it. The name of the wireless network still appears in the list of visible networks but when I try to connect it just times out. The iMac is only about 12 feet away from the Airport Express access point, and both my MBP and my iPhone are both able to connect as normal without a problem, but the iMac will no longer connect. I have made no changes at all to the network, or the iMac - it just no longer connects. Any help would be much appreciated.
    Jason.

    If everything else is connecting with no issues, I would go into the wifi setting on the iPad and redo the info there, user, password and anything else related to your wifi at your house.
    It is possible whatever he reset may have reset something to default setting which will not allow it to connect. If you need too then verify the wifi setting by comparing it with another device setting that works on your home network.
    Good luck

  • Mac mini will no longer find network home folder

    Upgraded my Mac mini server and now a few of my Mac mini's will no longer find the network home folder. I get this error message "Home folder isn't found in it's usaual place." When I use the same account with an iMac or another Mac mini the network user account logs in with out a problem.

    Logs?

  • Printer no longer connecting to wireless network

    I updated my wifi password so I had to reconnect all my wifi enabled devices. I decided to just go back to the original password b/c I had too many devices to update then all of a sudden my wireless printer stopped working. It kept telling me the printer is not connected. I have tried uninstalling and reinstallign the software. I have tried re-establishing the network connection on teh printer screen using the WPS button on eth erouter and the pin and they both just time out. When I run the diagnostics, it says FAIL next to Network Name (SSID) Found. It is no longer picking up my wireless signal from my router. Is there a way to manually enter the network information? I have tried to manually add the printer and it only comes up if I connect using the USB but not wirelessly anymore. When I called support they said it is becasue my printer is from 2010 and its not recognized anymore??? It was working fine a week ago, all I want to do is re-connect to my wireless network. HELP please! I have spent hours upon hours tryign to fix/figure out
    I am working on a Macbook with OS Mavericks 10.9 Also I am not seeing all of the utilities in my HP folder that used to be there under my applications, after I ran the uninstall they are all gone. 

    Hey @tlpatlen, 
    Welcome to the HP Support Forum.  
    I understand you're having an issue with getting your HP Photosmart Plus All-in-One Printer connected to your wireless network.  I would like to assist you with this and may have the steps you need to restore your connection.  
    Thank you for including the list of steps that you have already tried.  While you have essentially tried all of what I would normally recommend and all of what's recommended here, there is another alternative.  
    Do you happen to own or have access to a Windows PC (XP to Windows 8.1 are supported for your printer)?  
    Even if it would mean borrowing a laptop from a friend to use in your home or office, there are more setup options available to you in this instance with PC access.  
    Assuming you have PC access, you could click here to download and install the Printer Install WIzard for Windows. When you run the Printer Install Wizard on a PC, you have the option of installing the printer via usb, and then converting the setup to wireless.  The difference here is that if the PC doesn't automatically detect your SSID, you can enter it manually, along with the wireless password.  As you have already discovered, with your current printer and Mac combination, there is no other way to manually input your SSID and WPA/WEP.  
    If you were able to gain PC access and complete the basic steps I have presented, the benefit to this setup, is that your printer will be connected to your wireless network and will hopefully retain this connection when you re-connect it once again to your Mac.  
    I hope this helps or at the very least, gives you a sense of what options remain.  Please respond to this post with details if you have any further questions or concerns.  
    Best of luck!  
    E-roq
    I work on behalf of HP.
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

  • Apple TV does not find AirportExpress wireless network

    Hi all,
    this problem is driving me nuts, maybe someone here can help.
    At the moment I have an Apple TV in our living room. There is an AirportExpress device in the same room, which is creating a wireless network (WAP/WAP2 Personal, name "BNK") and is connected to a DSL modem.
    All computers (my MacBook Pro, my wife's Sony laptop) easily find the wireless network, whether they are in the living room or in any other room of our apartment.
    The Apple TV, however, never finds our network - it gives me a list of many other networks from our neighbors, but our own network is never in the list. This even happens when the Apple TV is about 2 meters away from the AirportExpress.
    Does anyone have any idea why the Apple TV is not picking up the network signal? Do I need to have a stronger WLAN access point because of potential interferences from the other networks? But why are the computers working fine, then?
    Thanks a lot and cheers,
    Bastian

    I see this post has remained unanswered. But as I have a similar problem I am hoping someone will answer.
    I recently bought an Apple TV and hooked it up to my Sony 46" HD LCD TV.
    My desktop is an iMac
    The internet connection is through the Airport express conected to an ADSL touter.
    The wireless network is working and I have access to internet through my iMac or other laptops.
    While installing AppleTV it detects my network but seems does not connect to internet.
    As a result while it synchronises with iTunes it fails to download from the internet directly. I am unable to upgrade to the latest version or play youTube or images from my mobileMe account.
    I have tried figuring out the problem but unable to do so. Thanks for your help.

  • I have an ipad first generation.  I am trying to connect to a linksys router and it is not finding the wireless network.  what do i need to do?

    I have an ipad first generation.  I am trying to connect to a linksys router and the ipad is not finding the wireless network.  What do I need to do?  Thanks for your help.

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • My hp c4599 printer will not connect to my wireless network

    My hp c4599 printer will not connect to my wireless network or show up on my computer during the installation even though it is usb connected. But it managed to create its own network where i can print wirelessly by selecting it sort of like bluetooth… I have installed different softwares from the hp website and looked at so many different forums but i cant find the answer. I have reset the printer and wireless network and god knows whatelse. I can also print fine through the usb cable, it just will not connect to my wireless network. I am going crazy P.S. once upon a time it was connected to my wireless network but i cant remember what happened. 
    So can someone please help and please dont be too technical

    Hi ..
    Try these support articles  ..
    OS X: Connecting a Wi-Fi printer to your Wi-Fi network
    Mac Basics: Printing in OS X

  • TS2655 imac can no longer find the time capsule to add it...how do i fix this

    my imac can no longer find the time capsule....i had to delete the old network and re add the time capsule to create a new one and now the imac keeps searching for the base and cant locate it

    If you mean that Time Machine can't find the Time Capsule, I'd try using the Time Machine panel of System Preferences to redeclare your backup disk.  If that's not what you mean, please explain.

  • My old PowerPC G4 no longer sees any wireless networks

    My old PowerPC G4 no longer sees any wireless networks. The PowerPC and my new iMac was powered off for a week. When I powered them on, the iMac found the usual wireless networks that are seen around here but the PowerPC did not see ANY! Even though they sit next to each other!! The G4 worked fine before and was connected to the internet.
    The G4 has an AirPort card in it and IS enabled. Is the problem with the card (how do I verify?) or did something get turned off on the re-boot?
    BTW the AirPort card does shows up in the system info and has firmware version 9.52 but states that "wireless network not available" under the Current Wireless Network.
    How do I fix this?
    Please Help!

    As this is an old G4, I presume you have a PCI network card.
    I had a similar problem on my son's old G4. After a lot of messing around thinking it was a software problem, I discovered that the antenna was damaged and did not make a good connection to the card. I could get it to work intermittently by pushing it on. The solution was to buy a new card.
    So try manipulating the antenna connection at the back of your mac to see if you can get a signal.

  • Why can my iPad no longer find my wireless printer?

    Why can my iPad no longer find my wireless printer? Anyone know? It is an HP Photosmart 5510 printer. I had no problem a couple of weeks ago when I first got the printer. Very annoying! Many thanks jonni

    Jonni-
    Did you make any changes to your system, like a new Wifi router?  Some are not compatible with AirPrint.
    One possibility is that you have a print job stuck in the print queue.  Double click your Home button, and a row of recent Apps will line up along the bottom of the screen.  Scroll across and look for the Print Center.  If it is there, you should be able to delete any stuck print job.
    Fred

  • No longer detetects any wireless network

    Hi
    My macbook was correctly connected to the Internet via my wireless network, and then it suddenly disconnected. It no longer detects any wireless networks (and there are quite a few usually!)
    I tried to turn airport off & then back on, but no change.
    I then tried to reboot my macbook, but no change either.
    When it searches for wireless networks, it is very slow (sluggish).
    I also booted on Windows 7 (dual boot), and it has *exactly the same* problem. Leads me to believe that it is a hardware problem, more than a software one..
    The only recent change: I moved from the UK to France few days ago => new ISP & new router (but I doubt this could be the source...)
    Is there anything I can do?
    Replace the wireless card?
    Thanks

    By the sounds of it, I've been having exactly the same problem. I will be using my macbook and suddenly the airport will drop out for no reason. Sometimes I can reconnect but often I'll have to try a dozen times or more, with the connection timing out each time. I've actually set up two differently named wireless networks at home to solve this - for a while, if one dropped out, I could reconnect to the other one. Even this has now stopped working. I've tried flicking airport on and off, restarting the airport base stations, I even have one of the wireless networks configured as WDS sending to an airport base station within a couple of metres of where I normally use my machine. Nothing works. I've tried deleting ~/library/preferences com.apple.internetconfig.plist and com.appleinternetconfigpriv.plist and rebooting - for a few times that would fix it, but not any more.
    The strangest thing, though, is that if I switch user accounts, I can access the wireless networks again no problem.
    It's almost like there's something that needs flushing in the user account's wireless settings - a buffer, or a cache, or something. It'll generally only happen once I've been using the machine for a sustained period of time.
    I'm running 10.5.8 with Wireless Card Type: AirPort Extreme (0×168C, 0×86) Wireless Card Firmware Version: 1.4.16.2 if that's of any help to anyone.

  • HP 8500A wireless printer can't find my wireless network (but my computer does) using DLink DIR 615.

    HP 8500A Wireless All In One has been working fine for ages (minor occasional hickups), but now can't get it to print.  Computer still picks up my wirelss network fine.  Printer works on all other stand alone pieces.  But, one day it stopped printing, so checked wireless signal.  Tried all steps and reports (have done that once in past a year ago and reset fine), but still get error saying it "can't find my network"... HELP

    Hello there @Rico6952 , welcome back!
    I read about how your printer is not finding your wireless network and I wanted to stop in to see if I could help you. I have some suggestions that I would recommend for you to hopefully help. Check the links out below. They are all related to network connection problems.
    'Unable to Find Printer' Error Message Displays on the Computer During a Wireless Network Installati...
    The Network Installation Hangs on the 'Checking Network Environment' Screen
    When the printer is connected the network, use this guide to assign a static IP: Printer Does Not Maintain Wireless Connection
    I hope this helps, have a great Monday
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • I was told at the Apple store that I could simply plug in ( electric power) the Airport Express and it would find my wireless network. I hoped to use it as a way to play music from my iphone. I do not use other Apple routers etc,

    The Airport Express is not finding my wireless network. I do not have any of the devices listed below. I have a Belkin wireless router. Can I still use Airport Express ( without plugging an ethernet cable into it) ? Any ideas for how to make it find my network ? It is sitting next to the wireless router-so is in range.
    If you already have a wireless network in your home and want to extend its range, AirPort Express can help. Just place it in range of your primary base station — an AirPort Extreme, Time Capsule, or another AirPort Express — and near the area where you want your wireless connection. Launch the easy-to-use AirPort Utility app on your iOS device or Mac, and you’re mere minutes away from long-range Wi-Fi enjoyment.

    Hi - you can do what you want to do with AirPlay from your iPhone - but unfortunately it is not as easy as the people in the Apple store told you - your first problem is that you have a non Apple router - you cannot extend a non Apple router wirelessly with the Express - you can only join the network and connect an ethernet device to it - you can however connect via ethernet and have it create a wireless network of its' own - you can set this up from your iPhone or the XP - but this is a complicated setup and would involve many different discussion areas of this forum - therefore I would suggest that you use your 90 days of support and consult directly with Apple to do this - go to this link - http://www.apple.com/support/contact/

Maybe you are looking for

  • Changes are not saved

    After making changes to my iWeb site, I have re-published as well as saved all to .mac. However, the changes are not saved. How can I save the changes?

  • HT4061 Serial # is F2*******8H2 my iphone has a itunes logo and a plug on image and nothing else will happen how do i fix this

    my iphone5 has a logo of itunes and a plug going up the screen to the logo how do I fix this, can't get it to respond to anything and I've done the restart with the start button and round button at the same time <Edited By Host>

  • Problems with Distortion in 30" Screen and new MacBook Pro 2.6 MHz

    I've got problems with distortion and shadows with this MacBook Pro model (the new 2.6 MHz Intel Core 2 Duo w/ 4 GB 667 MHz DDR2 SDRAM memory) on my Apple 30". The older MacBook Pro(s) work and look fine on this monitor (Apple 30"). Just bought the n

  • Extremely annoying BUG

    I use my iPhone in the car almost every day for music or podcasts (including video). I am not watching while driving, but from time to time take a quick look on what's going on in the video. The thing is that after a video podcast is played in landsc

  • The OnCommand API Services 1.0 is now GA.

    To learn more OnCommand API Services, read http://community.netapp.com/t5/Technology/Too-Many-Management-Tools-Giving-You-A-Headache-OnCommand-API-Services-Might-Be/ba-p/103125 on the NetApp Technology blog. For more details on this GA release, read