IMac will not auto sleep after 10.5.7 update with Safari 4 Beta

I've noticed that my new iMac 24" will not automatically sleep after updating to 10.5.7. Actually, that's not completely true, I've just discovered that if Safari Beta 4 (latest update) is open the iMac will never sleep automatically, but that if Safari is not open, automatic sleep works perfectly as it always did with 10.5.6. I've repeated this test numerous times and it's always consistent. Anyone have any ideas how to solve this?

Sorry that I do not remember where I saw this, could be MacFixIt, but the advice that I saw for issues with the 10.5.7 delta that comes through Software Update for folks with 10.5.6, was to download and overlay the 10.5.7 Combo as Carolyn has suggested, and then to download and install the most recent beta for Safari 4.
Of course this is best done without multitasking while the installations are happening, as well as unplugging and shutting down all other processes; external attachments and even Bluetooth and Air Port. Prepare for the installs by rebooting to your Install DVD and use Disk Utility in the Utilities Menu to verify and repair any issues with your boot volume, followed by rebooting into your account and using DU in Apps/Utilities to Repair Disk Permissions before and after the installs.

Similar Messages

My brand new iMac will not power up after an update restart, any suggestions?

Any suggestions on why my IMac will not power up after it done a restart?

Try an SMC reset and PRAM reset: https://discussions.apple.com/docs/DOC-3603
If that doesn't help:
See if it will start in Safe Boot: restart holding down the Shift key until you see a grey progress bar, type your admin password when prompted, let it continue to (hopefully) boot. Restart as normal from the Apple menu.
If that didn't help, try booting into the Recovery HD: restart holding down Command+r and choose Disk Utility from the four choices when they appear on screen. Once DU has launched select your Macintosh HD on the left and click on 'repair disk'. If anything gets changed click on repair disk again until you get a clear pass, restart as normal from the Apple menu.
If you still have problems, give AppleCare a call.

My iPad4 will not turn on after i OS 6 update

My iPad4 will not turn on after i OS 6 update and it keep asking to connect to iTunes?

What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
 Cheers, Tom

After installing 10.6, 10.6.8 my iMac will not log out after the prescribed time. How do I fix this?

My iMac will not automatically log off/out after the prescribed time since I have installed Snow Leopard. It will continue to go to, in order at the prescribed times, Screen Saver, Display Sleep, Computer Sleep. But the next step - Automatically Log User Off after xxx minutes no longer functions. Assistance?

Anyone can help?????

Captivate 7: slide with mouse will not auto advance after publishing

After I export my Captivate video, any slide that has a mouse object on it does not auto advance. I suspected that maybe the clicking sound file default attached to the action may have become corrupted, so I opened the sound file attached to "single-click" from Captivate. In the VisualClicks folder, there were no sound files. So, I opened the ClickSounds folder and attached the Mouse.mp3 file to this action. After publishing the training, the slide still will not auto advance. The slides that do not have the mouse action advance automatically as they should. The sound file may not be the issue (going to try to uncheck all of the Mouse Click Sound check boxes and republish to see if that helps).
Was hoping to find a solution for future videos.
Each slide is basically a layer of audio > slide > png file > the occasional smart object and/or text > mouse. I have no quizzes or video.
When publishing I use the following setup swf/html5 with swf + html5 checked and scalable HTML content checked. We use Google Chrome and I've had numerous people try my HTML link after I've uploaded all files and everyone has the same issue.
1- Do you happen to know why the mouse action would cause the slide to not auto advance, and if so please let me know a solution so the user doesn't have to click next. If the mouse itself isn't the culprit, any other suggestions on what could cause this?
2- Is there a way to make changes to the audio or override the mouse properties on all slides? I tried right clicking and "use the current mouse pointer for all slides" but it didn't change any of the properties. Thankfully my video is only 110 slides or it would have been even more painful.
Captivate 7
Windows 8.1

Of course! Here ya go
For the record, I did create a new project with only two slides to try and duplicate the issue. I had the same problem. I unchecked the Mouse Click Sound check box, republished and the slide auto advanced. I'm wondering if a default sound file was somehow moved or deleted? I discussed uninstalling and reinstalling C7 onto my laptop, but that's a frustrating solution haha

Imac will not start up after power outage

My iMac G5 will not turn on after the power went out. I can hear a clicking noise which seems to be coming from the fan/power supply area when it is plugged in. Nothing happens when the power button is pressed. Tried resetting PMU and still nothing. What do you think the problem could be? Bad power supply?
Thanks.
iMac G5 17" Mac OS X (10.4.9)

I just went through the steps of troubleshooting with an iMac that won't turn on using the led indicators with the back taken off, the first led light lights but it seems to blink very quickly (in unison with the clicking noise), does not stay solid. After pressing the SMU and then the internal power button, nothing happens again, and the 2nd led light does not light even momentarily. So it tells me that I need a new logic board...what kind of costs are we talking about here, anybody have a ballpark idea? Thanks for the help.
Pat

My iPhone 6 will not auto rotate after installation of version 8.0.2. The auto rotate lock is off in settings and in the Kindle app, but nothing will go to landscape.

Since the installation of 8.0.2 my iPhone 6 will not auto rotate in any app. I have locked/unlocked the feature in settings several times using the command bar but to no avail. I read using the Kindle app and it also is locked in portrait whether the lock is on or off.

Edselbe wrote:
Your auto lock got turned on. Swipe up on the screen and tap the upper right icon. This will allow it to work again!
Actually, the OP tried that (six months ago) and it didn't work. They resolved the issue (six months ago) by updating their system software (six months ago).

IMac will not turn on after a few days use. Interesting Solution, sort of :P

I've posted about this before. When it is working, it's perfectly normal, when it's not, pressing the power button will only result in optical drive spinning, no chime, no boot.
Well, here's what I found out. If i leave the computer plugged in/out and try to start it every 12 hours or so, the machine will not boot. I tried this continuously for about 10 days. I got fed up trying and was about to sell it to a repair shop and I unplug it from the wall for about 24 hours and vola, it works now.
I am thinking that maybe if I unplug it after use everyday, it will be a fine computer. I am suspecting that there's some kind of "discharge" taking place when i unplug it which in turn cause it to work fine. The "charge" get built up when I plug it in (whether I use the computer or not) and that's causing the no boot problem. I am also guessing that it takes about 20+ hours to complete "discharge" to a level that is workable for the machine to boot.
Any idea?
Just wanna share my experience and maybe someone can provide me with a better solution.
Thanks.

It worked fine after that. Before I got it, the previous owner had left it in a closet for 3 months. I assumed the PRAM battery was dead and that's why it wouldn't boot. So it seems like it needed a new battery and a deep power discharge/reset.
As for your computer there's a bunch of things I would try more or less in this order: Reset SMC, reset PRAM/NVRAM, check RAM seating, run the extended hardware test (if it can boot), reinstall the OS, replace PRAM battery, try running the computer with a UPS, replace internal hard drive, replace RAM, replace power supply. As you can see it gets more expensive as you run down the list. It sound like a hardware problem but I can't even guess the cause since I've never seen that problem. If nothing comes up in the hardware test, I would begin to suspect the power supply.

Airport Extreme will not auto connect after poewr out with USB Hub!

Hi all,
I have just purchased the Airport Extreme and have it connected to my ADSL router. All works fine but if the airport looses power (as the household power went off momentarily today) then once it powers back up it will not connect to the internet unless I unplug the USB hub connected to it first.
Anyone with similar experiences?

vtwiz wrote:
Hi all,
I have just purchased the Airport Extreme and have it connected to my ADSL router. All works fine but if the airport looses power (as the household power went off momentarily today) then once it powers back up it will not connect to the internet unless I unplug the USB hub connected to it first.
Anyone with similar experiences?
No
Your issue may have something to do with your ADSL router and/or ISP carrier when you have power interruption.
I would contact Apple to take advantage of your free 90 days of tech support by phone since your product is "new." Let them tell you what the problem is.
There are 2 Airport Extreme forums - http://discussions.apple.com/category.jspa?categoryID=140

IPod Touch (4th gen) will not sync music after the latest iTunes update

I'm using iTunes on a PC with Windows 7 and after the latest update (iTunes 11.2.2), it will not sync with my iPod touch 4 (also updated to the latest possible version - iOS 6.1.6).
Before the update there was no problem with the sync. And this iPod has always been synced only with this computer, and this iTunes library.
After the iTunes update, several songs on my iPod were greyed out and unplayable (the library plays fine in iTunes).
Now, when I try to sync, iTunes goes through all the steps, saying it finished syncing, without any error message but there is no actual change on the iPod.
I've tried deleting all the music on the iPod, to resync the entire music library anew.
Again, iTunes went through all the steps, finished "syncing" and nothing - and, of course, all the music on my iPod is now missing.
When I check the "On this iPod" option in iTunes, the entire song list shows up there but appears greyed out and unplayable.
On the actual iPod device, there is absolutely nothing in the Music app - no songs, no playlists.
The iPod always shows "no data" in the Music app.
Sometimes iTunes shows that I have 18GB of music on the device, sometimes it shows 0GB ...at one point it showed "no space available". But it has plenty of space - 23.5 GB of available space out of 32GB.
To fix this I've tried the following:
- automatic sync, manual sync, manually adding/deleting songs on the iPod, autofilling and replacing songs;
- resetting my iPod by holding the (on/off and home buttons) and resetting through the "reset all settings" option on my iPod;
- reset and restore from backup;
- uninstalled and re-installed iTunes on my PC.
- I've run the diagnostics tool in iTunes - all tests passed;
...plus various other suggested solutions I have found in the similar topics around here.
(I've checked and there are no restrictions to the songs, the computer is authorized, etc.)
Absolutely nothing works and it is very frustrating, as I usually only use the iPod for the music.
Please help.
Violet

Hello, VvioletT.
Thank you for visiting Apple Support Communities.
I see you are experiencing issues syncing your iOS device. Here are a couple articles that I would recommend going through when experiencing this issue.
iOS: Troubleshooting USB-related alerts when syncing
http://support.apple.com/kb/TS5254
Resolve issues between iTunes and security software
http://support.apple.com/kb/ts3125
Cheers,
Jason H.

Phone will not turn on after IOS 4.0 update

So I updated to IOS 4.0 this afternoon. However during the process of copying all of my songs, vdeos etc back onto the phone it was interrupted and the phone reset itself.
Since then I have not been able to turn my phone on. All I get is the apple logo, then the screen flashes white and the phone tries to boot up again.
I cannot even get the phone into DFU mode to restore from my backup.
Does anyone have any siggestions as to where I can go from here?

I'm in the same position except the upgrade and sync went fine. It all seemed to have upgraded fine, even put my apps in folders.
About an hour later noticed it would not switch on. I forced quit and it turned on. Now it will only come out of sleep if it plugged in to itunes or if I force quit.
I have done a full reset which again went fine, restored from back up fine. Still will not come out of sleep without me holding down the power and home button for a few seconds. How can i put it back to the happy world that i was in before I upgraded.
I have seen a couple of suggestions but all seem to be if you are using a MAC, i'm on a PC.

HT4889 After migrating Safari will not open up. It's coming back with "Safari quit unexpectedly".

Just purchased a new MBA, I'm trying to migrate my files from my MBP to my MBA using the Apple Cap. Safari is coming up with an error and will not open. The message from Safari is stating: Safari quit unexpectedly. I'm running MAC OS X 10.7.4 on my both MACs. Any ideas?

https://discussions.apple.com/thread/4251807

IPod touch practically will not do anything after 1.1.5 update was installe

Ok, so i have a first gen iPod touch which was running off the 1.1.1 firmware since i first got it, but i recently upgraded it to 1.1.5 and a few major errors occured.
1. it appears to have wiped all my music/videos off there, as when i try and access either of them it takes me to a blank screen for about 2 seconds then back to the home screen, yet it still says capacity available is only 145mb??
2. the ipod will not connect to my PC or laptop via itunes. it does however charge when attatched to the computer.
any suggestions as to what is going on?? any help would be appreciated!!

Try running the iPod reset utility to restore your iPod. Here's how:
http://support.apple.com/kb/HT1238
I'm not sure what major errors occurred but when you try this again, turn off your anti-virus and firewall while you do the update.

Ipad will not boot up after 7.1.2 update

updated to 7.1.2 yesterday and I pad will not boot up. it turns on and I get the logo but will not completely boot back on into home screen. I tried hold both button down and it would turn off but when turn on it did the same time. let it run all night while plugged in to see if it would boot but would not. don't want to have to restore because of loosing all my data I have on ipad. What can I do?

If the reboot by holding both the power and home buttons until the apple logo appears does not help, there is not much you can do except restore via the recovery mode per the instructions in http://support.apple.com/kb/HT1808

G5 will not start-up after 10.4.4 update - HELP!

I updated to 10.4.4 restarted and BOOM!
I get an do not enter sign. My G5 will NOT START UP!
HELP!!
(using my G4 Powerbook now!)

I updated to 10.4.4 restarted and BOOM!
I get an do not enter sign. My G5 will NOT START UP!
Well, I'm currently updating my Quad as I write this on my laptop. So, in a few minutes I'll kniow whether or not my upgrade will be like all of the positive comments in another thread or like this single one.
I suppose you will need to startup the problem child with your original DVD and see if you can repair the offending start drive.
Keep us posted.
I'm off to my computer room to check the Quads status. Later.

IMac will not auto sleep after 10.5.7 update with Safari 4 Beta

Similar Messages

Maybe you are looking for