IMac will not boot. Stuck at white screen after chime.

I am starting a new thread this because it seems that other people with this problem are able to get their Macs working with some sort of keyboard combination on boot. I am not. Nothing is working. My computer is currently a 27 inch brick... Actually a lamp, since it is frozen on a really nice white screen.....
Installed Yosemite on my 27" iMac (early 2010, i7) when Yosemite came out a couple weeks ago. Everything was working fine but it wouldn't read my external drive, so I did a reboot. After the reboot, it freezes on the white screen after the chime. No keyboard combinations work to get it to do anything....also, if I hit the power button it shuts off immediately.
Nothing is working to get it moving. And yes, I am using a usb keyboard, not the Bluetooth, to try to hit any of the keyboard combinations posted in various discussions.
My AppleCare is expired, so I'm going to be very upset if I have to go pay to have Apple fix their problematic software. Any help you guys can give will be greatly appreciated.
Thank you,

See if you can boot into the Safe Mode using your normal account.  Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear and again when you log in. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don’t do them all at once.
Safe Mode - Mavericks
Safe Mode - About
Startup - Gray, Blue or White screen at boot, w/spinner/progress bar
Startup - Gray Screen
Startup Issues - Resolve
Startup Issues - Resolve (2)

Similar Messages

  • HT2173 my iMac will not get past the start screen, after i restarted it after it not being able to upload my photos from my iPhone 4S to iPhoto  app on my iMac bc a visa vas about 3:15 min

    my iMac will not get past the start screen, after i restarted it after it not being able to upload my photos from my iPhone 4S to iPhoto  app on my iMac bc a visa vas about 3:15 min.  What should I do to get my imac past this?

    According to your posted Profile here you are running a PPC based iMac.  This Forum is only for "Intel iMac's", and so to get the expert and correct help you need you should repost your question in the "PPC iMac Forum".
    Hope this helps

  • IMac does not boot, stuck on gray screen

    Hi all,
    Need some troubleshooting assistance.
    Attempted to install a CAC card reader, with the ActiveGold software on my iMac.
    Reboot when prompted, and now the iMac will not boot at all (even will not boot in safe mode).
    Have removed all external devices, and no dice.
    I used Disk Utility from the OS X CD to confirm the volume is ok.
    Was able to access the drive from the bootcamp Vista using MacDrive and have copied the content I needed to grab - the volume appears to be otherwise ok.
    Before I Archive and Install, wanted to get some suggestions.
    Thanks

    Ok, maybe with iMacs that come pre-installed w/Leopard it's on Disk 1. Did you check?
    My MBP model, the HT is on Disk 2.
    Anywho, try the following:
    Except for the keyboard & mouse, disconnect all devices from your computer.
    Repairing permissions from the Tiger/Leopard DVD
    Boot up from your Tiger Install DVD while holding down the "c" key.
    Select the language you wish to use, and then choose "Disk Utility" from the menu bar.
    Your HD should appear in a panel on the left hand side of the window which opens. Select it and then click on the "repair disk" button in the right hand section of the window.
    If Disk First aid is able to complete the repair now click on the "Repair permissions" button.
    Once this process has been completed restart your computer.
    See Knowlege Base Article:
    http://docs.info.apple.com/article.html?artnum=25751 About Disk Utility's Repair Disk Permissions feature

  • After installing IOS8.02 my ipad air will not boot up. get white screen and apple logo and then a blue screen. over and over again.

    Ipad air wifi only 16gb worked ok with IOS 8.0 . just did upgrade to 8.02 and now it will not boot up. I get a white screen with the apple logo and then a blue screen. it does this over and over. I need help. What do i need to do. Please help.

    Hi ..
    Reset the device:
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    If that doesn't help, restore the iPad >  Back up and restore your iOS device with iCloud or iTunes

  • IMac will not boot, just runs apple screen with turning circle

    Trying to turn iMac on, but only get the gray screen with Apple icon and turning wheel.  Any advise on how to get iMac to boot?

    That isn't a good sign, it's rying to repair the drive & cannot useually with that.
    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
    If perchance you can't find your install Disc, or are running 10.7+, at least try it from the Safe Boot part onward.
    If 10.7.0 or later...
    Bootup holding CMD+r, or the Option/alt key to boot from the Restore partitiion & use Disk Utility from there to Repair the Disk, then Permissions.

  • What should we do when iMac will not start up past white screen?

    We were doing a Time Machine Backup when Finder froze.  We then tried relaunching Finder.  Then we restarted.  It stoped at white sceen. What should we do?

    Here is what Apple recommends: http://support.apple.com/kb/TS2570
    It is slightly outdated. I recommend you start with Apple Hardware Test to rule out any obvious hardware faults, then boot Lion Recovery and run Disk Utility from the Utilities menu. Select your startup disk in the left column, then click "Repair Disk".
    If you get that far and everything works, I recommend starting the computer in "Safe Mode" - read about it here first: Mac OS X: What is Safe Boot, Safe Mode?
    Safe Mode is for troubleshooting only. If it boots in Safe Mode, but does not boot normally, then report your results.

  • IPhone 5 will not boot up past startup screen after attempted update to iOS 8. Not recognized by computer.

    Like everyone else today, I attempted to make the move to iOS 8, using my Mac's iTunes. All was running smoothly, the progress bar was nearing the end when I received the error that "the iPhone software update server could not be contacted." With a now useless phone, I restarted it, hoping for the best as I could do nothing. I am now stuck with a phone which will turn on to the white startup screen and black Apple Logo, then instantly shut down, leaving me to repeat the process. If I hold down the home button, I can enter what seems to be "Recovery Mode," with a red iTunes Logo, as opposed to the usual blue. From here, all internet sources I have found suggest that I should restore the phone, but that's really where I hit the problem. When I plug the phone in, when in Recovery Mode, I simply receive the "iPhone software update server could not be contacted" error again, leaving the phone not recognized by iTunes. In non-recovery mode, the phone appears to simply turn off so fast that iTunes has no time to find it.
    Any one with similar problems or solutions?

    This what happened to my iPhone 5 after I updated to iOS 8.0;
    The update process was done smootly without problems thru
    Over the Air.
    Now when I cold start/boot my iPhone 5, my apple logo appears as it was
    in iOS 7, but after 30 seconds or so, my Apple Logo dissappears the
    screen goes black for 5-6 seconds, but then viola! I am at the Log-On
    screen... Then I start using my iPhone.
    Just like Chris above, I have done 10 reboots, (complete shut down and
    restart), its always the same...
    Other than this, my iPhone works just fine. I will not re-install the iOS.
    From my past experience, re-installing the iOS does not change
    these minor differences...

  • Major problem - Stuck on white screen after chime

    Alright, long story short, I tried to install bootcamp, I got the partition and everything and it rebooted to the win XP blue screen install thingy.. I formatted the drive (thinking it was the drive bootcamp created) and I think I probably formatted OS X's drive, so I quit installing XP. So now when I start my iMac, I just hear the chime and I am stuck at the white screen, probably because I have no OS.
    I want to reinstall OS X (I just got my mac, nothing to lose) but I cannot seem to be able to boot from the install CD no matter what I do...
    Anyone know what I should do? I tried holding C, option-C, apple-option-C, everything while restarting with the OS X cd in.
    I will have a OSX-less christmas at this rate
    On a normal PC I would just go into the BIOS and boot from CD but I don't know how that works on a Mac... HELP!

    Welcome to Apple Discussions. Sorry about your Mac-less holiday!
    An FYI, Macs don't use Bios, they use the more modern Extensible Firmware Interface (EFI).
    Just an idea for you. There is an entire Apple Discussion forum dedicated to Boot Camp and Windows XP.
    Whereas, not everyone here with an Intel iMac has installed, tried to install or has experience with BC & XP, everyone there has or at least has an interest. You may attract help more quickly there. And that would be where the Boot Camp pros hang. This has probably happened to others.
    The Forum is at the bottom of the main Apple Discussions page under Windows Compatible Technology.
    Here is a link;
    Forum: Boot Camp Public Beta
    Good luck!

  • Won't boot stuck on white screen

    I got an apple question for u before I schedule an appointment at the genius bar...my mid 2007 24"  2.8GHz intel core 2 duo 4 GB 1067 DDR3 iMac running 10.7.2 will not boot passed the white screen. It just keeps on spinning. I had to do a full erase and install and restored from Time Capsule backup. I can boot while holding the option key and it will allow me to boot to the Recovery HD which I ran disk utility and repaired permissions and verified disk, everything came back repaired and "Ok", I reset pram...All that is good but when I try to restart to the Macintosh HD it just spins on the white screen...any suggestions before I bring it in?
    thanx

    If you can get it to boot once the first thing you should do is backup all your data using Time Machine or better yet create a Bootable Clone using SuperDuper or Carbon Copy Cloner. What Apple says to do to trouble shoot is in Gray screen appears during startup. 
    I would also recommend running Apple Hardware Test in Extended Mode, if no errors appear the first time run the test 2-3 more times. Each Extended Mode test will take 30-60 minutes.

  • My 2011 IMac will not boot up past the White apple logo screen with the whirly circle

    My 2011 IMac will not boot up past the White apple logo screen with the whirly circle. I have tried various commands but to no avail. does anybody have any advice?

    Take each of these steps that you haven't already tried. Stop when the problem is resolved.
    Step 1
    The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
    There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
    a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
    b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
    c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
    Step 3
    Sometimes a startup failure can be resolved by resetting the NVRAM.
    Step 4
    If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
    Step 5
    If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
    Step 6
    Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
    Step 7
    If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
    Start up in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Post for further instructions.
    Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
    If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
    If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
    Step 8
    Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
    This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
    Step 9
    If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.   
    Step 10
    Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
    Step 11
    Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
    Step 12
    This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
    Step 13
    If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

  • IMac will not boot up, all I get is white screen help

    MY iMac will not boot up, all I get is white screen?
    what do I need to do to start machine please?

    Start with a google search for white screen site:apple.com and peruse the many hits.

  • Intel iMac will not boot past gray screen

    Intel iMac will not boot past gray screen
    my system:
    new (month old) 24" intel imac, 2.8 ghz, 4 gb ram.
    running: leopard (upgraded from tiger, which was pre-installed at purchase), installed 10.5.1 update right before this huge problem occurred.
    install discs on-hand: two-disc tiget set, single leopard upgrade disc.
    what led to this:
    i wanted to install windows using bootcamp on a 50 gb partition.
    at this point i was running leopard 10.5
    i followed all bootcamp instructions, printing out the guide, as well. once i got into the windows setup, i was prompted to choose a partition to install windows. unlike the bootcamp guide, which showed three partitions, one clearly labeled "bootcamp", i saw only one partition. not wanting to risk writing over my mac partition, i quit the setup and rebooted the mac os. after some googling around, i looked for firmware updates (didn't need any), and then software updates. i decided to try updating to 10.5.1.
    i then ran through boot camp again, deleting my previous windows partition, creating a new one, and moving forward as before. once again, i was only shown one partition to choose from in the windows setup. i exited the setup again to reboot through the mac os, but this time, i was only given a blank gray screen.
    here's what i have tried so far:
    booting from a CD, holding down the C or D keys: no response (in fact, i have to restart the computer holding down the mouse button to be able to eject the CD)
    booting with option key held down: gray screen
    booting with option key held down with external bootable firewire drive attached: the firewire drive appears as a boot icon, and i can click on it within a five second window, but then the screen freezes after that time period, and nothing changes
    booting into target mode while attached to another mac: gray screen (no firewire icon, and drive never shows up on other mac)
    resetting NVRAM: i'm able to hear the boot chimes, but no difference in performance. gray screen every time
    Safe boot: nothing but a gray screen
    Verbose mode: gray screen
    Single user mode: gray screen
    Single user mode with firewire drive attached: occasionally (not every time), i am able to get the white on black terminal to show up. from here, i'm able to run fsck, but it appears to only be checking the firewire drive. i have tried several times to boot from here, and once it took me to a blue screen with movable arrow cursor, but it never went beyond this.
    is there anything else left to try before taking it to apple?
    any help would be greatly appreciated.
    thanks,
    Casey Burns
    Casey Burns Illustration and Design
    http://CaseyBurns.com

    I'd call Apple support at this point. You'll need
    to put this issue on the record.
    Call U.S. iPod and Mac technical support: 1-800-APL-CARE (1-800-275-2273)
    The wait may be long for an agent to come on the line
    so expect that and have some other stuff to do in the meantime.
    If you have the applecare protection plan, I'd ask about "onsite"
    service.
    I like your work ! Good luck !
    Slim
    Message was edited by: slimpikkunz

  • White iMac will not boot after 10.6.8 upgrade

    I downloaded the 10.6.8 upgrade last night. This morning, the white plastic iMac will not boot.
    I have tried evey known keyboard option.
    I have tried booting from the snow leopard dvd.
    I have zapped the pram.
    Nothing!
    Please, any help would be great.

    We bought 2 iMac's 27inch with i7 Quad-core. Did the update a couple of hours ago. My Mac asked to reboot after update, but i didn't accept and worked with iTunes for a while. Then rebooted manually. After reboot it took about 15 minutes to reboot (light-blue screen with nothing on it, not even a mouse). My Wife also did the update of 10.6.8 and rebooted when asked. Her iMac also took 15 minutes to reboot, bus update was unsuccesful! So did update again and then denied reboot and rebooted manually! (Apple-logo and then choose "restart").
    When we did that, iMac was very fast and updateproblem was solved! So deny reboot and reboot manually and problems are over. Same deal with 2 brandnew iMac. I'm guessing this is an issue. To much of a coincidence for me!

  • My iMac will not boot up.  it brings up a black screen with a cursor

    all of a sudden my imac will not boot up.  it brings up the grey page with the apple, then instead of going to the login, it goes to a blank black page.  The cursor moves with the mouse, but that is it

    First carefully read and then methodically follow Apple's troubleshooting steps in Gray screen appears during startup

  • Sometimes iMac will not boot up

    hey guys i have been having this on going problem for about a week now. Ok so here's what's happening, this usually happens at night. It seems that my iMac will not boot up, I have my computer put to sleep when I go to sleep and I can wake it up again in the morning. Now when I go out in the evening today for example, I just got home, woke my computer up and everything seemed fine. After a little bit my computer froze so, I restarted it and it will not boot up it would get stuck on the gray screen, sometimes the apple and the spinning thing under it (not the beach ball one) would show up and sometimes I would have just a grey screen. Over the past week I've tried the following:
    Reset the Pram
    Booted up from the installation cd.
    Removed all the cords waited for a couple min. then tried again
    Eventually I can boot up, However I am very concerned to what the problem might be.
    O yea I also ran a permission repair
    One final thing if knows how to protect macs with an anti virus or something similar, it would really help me out.
    Thanks

    Hi Karim
    The symptoms you describe could be caused by bad RAM.
    Follow this link to learn about testing memory.
    With your iMac you should have received an Apple Hardware Test CD, if not it's included on the Installation DVD (it would state that written somewhere on the DVD). There's also a RAM test included, but it isn't as dependable as memtest (mentioned in the link above) in my experience.
    Follow this link to learn how to start the Apple Hardware Test.
    Kind regards
    --greg

Maybe you are looking for