IMac will not connect to LinkSys WRT54G

Greetings all:
I'm new to Macs as of about 2 hrs ago. I've been a PC geek for too long. I have a home network set up with a wired PC and a a wireless laptop PC, and I just took delivery of my new iMac. It will recognize my network (and a few others) but will not connect to it. The iMac won't connect, stating that the password is incorrect. Not really sure how to proceed. I've read through a bunch of posts, and it sounds like most people are able to connect, and then have occasional disconnects. The router is up to date re: firmware. The router is too far away from the iMac to connect an ethernet cable to.
Any suggestions are greatly appreciated.
iMac Core 2 Duo 2.33 - 2 GB   Mac OS X (10.4)  

Welcome to Discussions, Kayexalate!
I assume you mean that during the "Welcome" setup process you were denied access. That is always the case if you're trying to join a "closed" network. Even for other reasons it's possible to get that message. First, open the Application "Internet Connect" and set it to "Show AirPort status in menu bar" and then close and quit Internet Connect.
Use the "AirPort" beam icon in the menu bar to Turn AirPort On, and if, as you found, it will not connect - open and select "Other..." and in the box that opens, first use the "Wireless Security:" selector to duplicate your network's security method and then enter the name and password of the network. Click the "OK" button and that should allow the connection, as well as (due to the default settings in place) enter your network as a "preferred network" in the "AirPort" pane of the Network panel of System Preferences.
Message was edited by: myhighway

Similar Messages

  • My 5yr old iMac will not connect to the Internet. All other computers in the house will, including my Mac pro and iPad. What should I do?

    My 5yr old iMac will not connect to the Internet. All other computers at home will, including my Mac Pro and iPad. I'm at my wits end. What should I do?

    Which OS are you using (update your user profile).Try a
    SMC RESET
    http://support.apple.com/kb/HT3964
    Shut down the computer.
    Unplug the computer's power cord and ALL peripherals.
    Wait 15 seconds.
    Attach the computers power cable.
    Wait another 5 seconds and press the power button to turn on the computer.
    The 5 second timing is important to a successful reset.

  • My wireless internet is working with all of my other devices but my imac will not connect to the network?

    Can anyone help?  My wireless connection is working on both my iphone4S and my ipad2, but my Imac will not connect to the network.

    First run Software Update to make sure your iMac is up-to-date.
    Even though things are working OK on other devices there may still be issues with your modem or router so it's best to start there. Locate the manuals on both devices and reset each. Do the modem first then the router. Next make sure the router has up-to-date firmware. If the problem continues after updating resetting and updating both devices then download and install iStumbler and let it run for about 30 minutes. iStumbler will scan your area for the Wi-Fi networks being used, pay attention to the channels each network is set to. Most routers are  pre-set to channels 5 or 6 and if you are in a congested area and all the routers are set for channel 5 or 6 then you can see where there might be a problem. Set your router's channel to one not being used in your area, you have at least 14 channels to choose from. Also check to see if your router is using 802.11n, if it's not then it would be wise to upgrade the router to a faster device.
    Next is if you are still having issues the problem could be your ISP's DNS settings. If you want to learn about DNS please read CNET's DNS Article and MacWorld's DNS Troubleshooting . Then use the instructions below to reset the DNS settings:
    1. System preferences
    2. Network
    3. Click Advanced
    4. Click DNS tab
    5. Click + sign
    6. Add 208.67.222.222
    7. Click + sign
    8. Add 208.67.220.220
    9. Click OK.
    10. Exit System Preferences

  • My imac will not connect to wifi what so ever. i have tried 3 different routers and all my other apple devices work fine. when i take it to the genius bar it seems to work with apples instore wifi. thus leading the "geniuses" to say nothing is wrong.

    my imac will not connect to wifi what so ever. i have tried 3 different routers and all my other apple devices work fine. when i take it to the genius bar it seems to work with apples instore wifi. thus leading the "geniuses" to say nothing is wrong.

    Back up all data before making any changes.
    Step 1
    Take all the applicable steps in this support article.  
    Step 2
    If you're running OS X 10.8.4 or later, run Wireless Diagnostics and take the remedial steps suggested in the summary that appears, if any. The program also generates a large file of information about your system, which would be used by Apple Engineering in case of a support incident. Don't post the contents here.
    Step 3
    If you're not using a wireless keyboard or trackpad, disable Bluetooth by selecting Turn Bluetooth Off from the menu with the Bluetooth icon. If you don't have that menu, open the Bluetooth preference pane in System Preferences and check the box marked Show Bluetooth in menu bar. Test. Continue if you find that Wi-Fi is faster with Bluetooth disabled.
    From that same menu, select Open Bluetooth Preferences. If the box labeled Discoverable is checked, uncheck it. Click the Advanced button, and in the sheet that opens, uncheck the top three boxes, if any are checked. Click OK. Enable Bluetooth and test again.
    If the application called "Bluetooth Setup Assistant" is running, quit it.
    Step 4
    This step will erase all your settings in the Network preference pane. Make a note of them before you begin, and recreate them afterwards. It may be helpful to take screenshots of the preference pane.
    Triple-click the line below on this page to select it:
    /Library/Preferences/SystemConfiguration
    Right-click or control-click the highlighted line and select
    Services ▹ Reveal
    from the contextual menu.* A folder should open with an item named "SystemConfiguration" selected. Move the selected item to the Trash. You may be prompted for your administrator password.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.
    Step 5
    Reset the System Management Controller.
    Step 6
    Make a "Genius" appointment at an Apple Store, or go to another authorized service center.
    Back up all data on the internal drive(s) before you hand over your computer to anyone. There are ways to back up a computer that isn't fully functional — ask if you need guidance.
    If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present. 
    Keeping your confidential data secure during hardware repair
    *An SSD doesn't need to be zeroed.

  • IMac will not connect to safari or firefox after new hard drive

    Apple store just put a new hard drive in my iMac. My time machine had all my previous info stored so I downloaded it and transferred all my old info. Now the iMac will not connect to the Internet? My Internet is running and I have tried to reset safari with no luck? Please help.

    If you know for sure, that your Internet connection is OK, check the status of the connection on your Mac. Got to system perferences and open the Network applet. What is the status of your Ethernet or wireless connection. Is is set to get an ip address via DHCP? Is is showing any IP/Subnet/Router addresses? If you're not sure what to do, click on the "Assist me" button on the bottom of that window...Hope this helps.

  • Imac will not connect to Airport Extreme when configured WPA/WPA2

    Imac will not connect to Airport Extreme when configured WPA/WPA2
    Posted: Jul 5, 2007 8:22 PM Reply
    I just got my Imac to connect to the internet using my Airport Extreme but only by using WEP. I had my Windows XP SP2 machines connecting using WPA/WPA2 with no problem. The Imac will not connect using anything other than WEP, and 1 of the XP machines will not connect using WEP.(I have not tried the other XP machines) I had to set the Airport Extreme for an open network in order to let both computers access the shared hard drive and access the internet.
    I don't know what the problem might be and would appreciate any suggestions.
    MacBookPro, Imac   Mac OS X (10.3.9)   Fujitsu tablet PC, 2 XP desktops

    hehe...on the visuals. I figured it out already, and I have the old airport card. However, I did a chat with Apple support and while we were chatting I found a USB adapter with MAC drivers which will work. It is:
    Hawking Technology HWUG1A Wireless-G USB Adapter with Removable Antenna for Macintosh
    Manufacturer Part# HWUG1A
    That is the only adapter that actually does WPA/WPA2 that I can find that is for a Mac and not just an older USB that only does WEP. It surprises me that Apple does not have a USB product like this. Anyway, for $56 including shipping, I will have it by Monday or Tuesday. Pretty cool.
    Thank you so much for your assistance. It is appreciated.
    Lynn

  • My iMac will not connect to time capsule used as base station in my roaming network

    I have a network that is made of up a Time capsule as a base station and 3 airport express's used to extend my wifi coverage. It is setup as a roaming network with each express hardwired to the base time capsule. I have a iMac that will not connect to the base station, it will only connect to one of the remote express's. The iMac is next to the base satation. Other mac notebooks, iPhone or iPads all connect to the base station when they are near it. Only my iMac will not connect to it. Any suggestions as to why this is happening or steps I can take to fix this.

    Hello FoxFamilyVA
    Check out the first article below to go through some troubleshooting options to get your iMac to connect to your Time Capsule. I would go through and remove it from the list of known networks that you join and then add it back in. I would also recommend that you try and create a new Network Location to see if there is an issue with your current configuration.
    Wi-Fi: How to troubleshoot Wi-Fi connectivity
    http://support.apple.com/kb/HT4628
    Using network locations (Mac OS X v10.6 and later)
    http://support.apple.com/kb/HT5289
    Regards,
    -Norm G.

  • G4 iMac will not connect to internet

    Hey all.
    Got in a G4 iMac 17'' 1GHz. It will not connect to the internet thru ethernet. It works fine through AirPort though. I've tried everything I can think of. Reinstall the OS, create a fresh user account. Nothing works. I'm guessing there is something wrong with the ethernet connector on the logic board. The computer was dirty and had a lot of water marks on it like it had been sitting next to an aquarium so my guess is water might have gotten in the bottom.
    Think I'm right? Or is there something else I can try?
    Thanks in advance.
    Thomas

    I've never had to use it, but the OS X CD/DVD that came with the system provides a set of diag tools. You boot from the disc, and run these tools to check hardware on the machine.
    I am sorry I don't have any further clue on that specific tool set or how to use as I never have. I simply know it exists.
    Quite sure a bit of searching on the forums here will reveal the boot-disc options, etc. Heck... you may find info on the disc itself, try inserting it, opening and see what is what.
    Beavis2084

  • IMac will not connect to my aluminum bluetooth keyboard

    I have the original aluminum bt keyboard from Apple (the one that takes 3 batteries, instead of 2). It will not connect to my 24" white Intel Core 2 Duo iMac at all. I've tried everything I can think of and it's just not connecting.
    The bluetooth magic trackpad connected just fine. The bt on the iMac must be working.

    I am not sure the "three days" has anything to do with it. I had the same issue with my keyboard and my imac. I called apple support, did several resets, talked to the second level support to which he said your keyboard is connected to another mac. I disconnected from my other mac it worked.
    Now my MacbookPro with a different keyboard has the same problem. It must be the lion and the bluetooth update ( I read there was a "speed up" on bluetooth).
    The support guy also told me that there is a Lion update coming up, hopefully in a couple weeks. This is a major snafu for Apple when their own keyboards don't work with the new version of the operating system.... Oooops!!!

  • IMac will not connect to wifi says self assigned ip?

    I cannot connect to the Internet with my iMac. I just get the message that my wifi has a self assigned IP and so will not connect. Any solutions to this?
    Nick

    Did you try resetting/restarting your Wi-Fi router?

  • My iMac will not connect to Photo Stream, but all my other devices will. i have all updates.

    My brand new, 2.7 GHz intel Core i5 will not connect to Photo stream, no matter what I do.
    I try to enable it from Icloud Preferences.
    I try to turn it on from Iphoto preferences.
    I try to turn it on from the iphoto app, but no luck.
    When I try to add an account, it doesnt have the icloud option. Only Mobileme.
    It says I'm signed in.
    Getting frustrated!!!
    HELP!!!!!

    Did you set DNS Server properly?
    System Preferences -> Network -> Advance... -> DNS

  • IPhone will not connect to Linksys WAG54G Wi-Fi

    I can not get my iPhone to connect through my wireless router. I have even tried a reset on my router. My laptop works fine, but my iPhone will not connect. I can see the connection, but i get an 'Unable to join the network' message each time i try to connect.

    Nothing on the phone can be changed to make it work unless a Software update was released to fix whatever was preventing a proper connection.
    Can you connect to any WiFi networks at all? If so then it does isolate it to something with the router.
    Based on what you said. You go to Settings - WiFi - You see your network, Tap on it. And Unable to Join?
    So you never get a check-mark by the network name?
    If you do actually get a check-mark next to your network, tap on the Blue circle. Would be interesting to see what the IP address started with.
    Based on what you said when you disabled security, Did the iPhone no longer show a Padlock next to the WiFi network?
    Also try changing the SSID sometimes that oddly works.

  • IMac will not connect to update server or download torrents

    I am very new to iMac and having problems connecting to the internet....I am in a rural area using satellite connection. It will connect to the internet so I can view websites however every time I try to update iTunes it is telling me it can not connect to the update server?
    Also having same issues when trying to download torrents...It is showing on transmission however it will not download...it just sits there doing nothing and not connecting to anything?? How do i fix this??

    Welcome to Apple Discussions!
    Torrents unfortunately are primarily used for illegal trading of software and music. If you want to download legal software for the Mac, get it from places listed on my FAQ*:
    http://www.macmaps.com/macoxnative.html#NATIVE
    They are also a back door to get spyware, and trojan horses on your machine. While very few exist for the Mac, they do exist, and Torrents and P2P software are the first line of attack, since they essentially establish your machine as a software download site on the internet. Sateliite internet does not have the bandwidth to handle torrents it regardless since the upstream is much slower than the downstream, and latency issues abound.
    - * Links to my pages may give me compensation.

  • IMac will not connect to just 1 single website, all other computers will

    so im on a July 2010 27'' iMac..
    software is completely up to date, 3 browsers.. firefox(updated) - safari ( updated ) - Chrome ( updated ).
    all of these browsers work like normal for any other website.. except my personal website www.itsjustjake.com
    im in an office with 5 other computers, some are wired into a LAN and some are grabbing connection wirelessly...
    all of these other computers can access my website, but still mine will not..
    firefox says no connection to server.. the others say the same thing
    i'm guessing it has something to do with my network settings, but do not know how to start to change them..
    please help me out, im trying to update my websites content and i can't even connect to my server via FTP using CODA.

    If it was a network setting, other sites wouldn't connect either.
    ...JER

  • IMac will not connect to Wifi or recognize Ethernet cable

    I have an iMac running on OS X. All of a sudden I cannot connect to WiFi...and the computer will not recognize an ethernet cable plugged in. It's wierd...the Wifi will recognize networks in the area. I'll see mine, click on it and it'll ask for the password. I put in the password and it says it's incorrect (The password is defiitely correct as I have several other devices hooked up via Wifi). It wont recognize an Ethernet cable pugged in. It just says one isnt plugged in.
    I did aquire a new modem/router recently (Ubee from Time Warner Cable) but no other device is having any issues...including a brand new 27" iMac...among several other devices working fine on the WiFi.
    Any suggestions are appreciated. Thanks

    First I would try Safe boot.
    1. Shut down Mac
    2. Start mac holding 'Shift' till you see the apple logo
    3. Log in holding 'Shift'
    4. Test there
    5. Reboot
    Also I would follow the steps here to create a new location:
    http://support.apple.com/kb/ht2712
    This will create some default network adapters and see if you can connect again

Maybe you are looking for

  • How many times can you upgrade your ipad mini?

    i have the ipad mini, and i would like to know, how many times you can upgrade? reason being the 3rd gerantion ipodtouch only upgrades once. for an ipad mini can i upgrade more than once, because it would be fair

  • Performance problem in loading the Mater data attributes 0Equipment_attr

    Hi Experts, We have a Performance problem in loading the Mater data attributes 0Equipment_attr.It is running with psuedo delta(full update) the same infopakage runs with diffrent selections.The problme we are facing is the load is running 2 to 4 hrs

  • Java Mapping Using DOM Parser.

    Hi Experts, I am new to Java mapping and i have followed the link http://scn.sap.com/thread/3173071 and it is working fine. It is for only one item. I have tried to modify the code and i placed a for loop to go create the Output Node based on the No

  • What do i put in incoming mail server for gmail

    What do i put in incoming mail server for gmai;?

  • Sql to convert mdsys.geometry to wkt or wkb

    I've been looking through the sdoapi for 10g (the only available now) for a way to convert a geometry column to wkt or wkb. There was a method with the old version (get_wkt and get_wkb). Does anyone know how to do it with the 10g sdoapi Mike Smith