Imac will not eject cd

The CD drive in my iMac will not eject CDs.  I often have to shut down the iMac and re-straert it several times before I can get it to eject CDs.  Help!

It may need cleaning or may  be warn out. Get a cleaning kit and try that first.

Similar Messages

  • HT3964 My iMac will not eject a CD when all the prescribed checks are completed

    I have inserted a CD in the iMac superdrive, no image appears on the desktop, I cannot eject the CD using all the prescribed options.
    The Mac will not shut down except by removing the power plug. Does anybody have any suggestions before I call in the "Big Guns"??

    Go to > Eject a stuck disk from your Mac DVD super drive
    or > The ultimate guide to ejecting a stuck disc from Mac SuperDrive | MacYourself

  • IMac will not eject iPod mini

    About six days ago I connected my iPod mini to my iMac G5 to update. When iTunes indicated that the update was complete I tried to eject the iPod, yet the Do Not Disconnect screen was still being displayed. Each time I try to eject it I get an error message saying that "the iPod cannot be ejected because it containes files that are in use by another application" or that "the disk is in use and could not be ejected. Try quitting applications and try again." I quit all the open applications and tried again, still to no avail. I have tried restarting the computer and turning off the computer and that has not worked either. I tried to restore the iPod but i get another error message saying that "the iPod could not be unmounted because it is in use. Close any open files on the iPod and try again." This has been driving me crazy for days now and I have been unable to find an answer in the forums or in any articles. Please help!

    Open the Terminal application in your /Applications/Utilities/ folder and then run the last command listed on this page. Doing this will show you which files are open on the iPod; when you have a list, post back with it. It might also be helpful to restart with the Shift key held down, as doing this disables some of the background processes which might interfere with ejecting the iPod.
    (13251)

  • A dvd will not eject from my brand new IMac. I have done every suggestion in the help area. Any suggestions on how to get this DVD out of the computer?

    My brand new IMac will not eject a DVD. I have tried everything that was suggested in "help". It didn't recognize the dvd, and whenever I try to eject it, it is not highlighted. I have tried to restart while holding the track pad, and nothing happened at all. The dvd is from the library...so it needs to be returned! Any other suggestions?

    Have you tried all of these?
    1. Pressing the Eject key while opening the iMac.
    2. Pressing the Eject key while closing down the iMac.
    3. Holding down the Option key while restarting the iMac.
    4. Using Disk Utility to try to Mount, Repair and Eject the disk.
    5. Holding down the Mouse while restarting the iMac.
    6. Pressing the O and F keys while closing down the iMac.
    7. Opened Applications > Utilities >Terminal and typed in 'drutil tray eject'.

  • Imac will not read a cd rom and I cant eject it!!!!! Help please

    I have bought yesterday a new imac 24 inch with snow leopard. I was loading my music and pictures so I inserted a cd in the drive. The icon does not appear on the desktop so I can not open it or drag it in the recycle bin. I have tried to use the eject button on the keyboard and that does not work. I tried all other suggestion on this discussion board:
    I put it to sleep and then woken it up with the eject button. Did not work.
    I Logged out user and tried eject button. Did not work.
    I tried to restart keeping the mouse button down but I got a blue screen with the spinning wheel for ages.
    Now the imac will not shut down anymore unless I push the on/off button for few swconds (if I try through the apple menu I get the blue screen for ages with the spinning wheel).
    I went on the disk utility in applications and tried to eject from there. I get a message that says I should close the programmes that are using the disc.... but there aren't any as far as I can see.... Any ideas????? Thanks

    I posted this twice in error and the issue was resolved thatnks to advice in the other post.

  • My iMac will not recognize a blank DVD-R that I am trying to burn. It also won't eject unless I "shut down"

    My iMac will not recognize a blank DVD-R that I am trying to burn. It also won't eject unless I "shut down" and restart while holding down the mouse button. Anyone have any remedies?

    I ran into a similar (identical?) problem.  I inserted a DVD-R and my imac would not recognize it.  The only way to eject was to do a restart.  I tried some of the SMC reset stuff.  That didn't work.  I came across another thread on macrumors (http://forums.macrumors.com/showthread.php?t=336501)
    that solved my problem.
    I have an external Western Digital Passport drive that I use for timecapsule.  It turns out
    there are two files that WD adds to the /Library/LaunchDaemons that interferes with the
    SuperDrive.  I removed the WD files from the LaunchDaemons directory and everything works fine
    now.  Again, refer to the macrumors thread for more details.
    The files I removed from the LaunchDaemons directory were:
    com.wdc.WDDMservice.plist
    com.wdc.WDSmartWareServer.plist
    ..yes I had installed the WD backup software to see if I liked it....I did not, but didn't realize this files would cause a conflict with the SuperDrive.

  • Cd will not eject; late 2009 iMac

    I inserted a music cd to copy and it will not eject. When I press the eject key, it starts the process but then reinsets itself, never emeging from the slot. The cd worked fine in my macbook pro.

    Look at Kappy's initial response in this thread:
    https://discussions.apple.com/thread/4211891

  • Intel iMac will not boot past gray screen

    Intel iMac will not boot past gray screen
    my system:
    new (month old) 24" intel imac, 2.8 ghz, 4 gb ram.
    running: leopard (upgraded from tiger, which was pre-installed at purchase), installed 10.5.1 update right before this huge problem occurred.
    install discs on-hand: two-disc tiget set, single leopard upgrade disc.
    what led to this:
    i wanted to install windows using bootcamp on a 50 gb partition.
    at this point i was running leopard 10.5
    i followed all bootcamp instructions, printing out the guide, as well. once i got into the windows setup, i was prompted to choose a partition to install windows. unlike the bootcamp guide, which showed three partitions, one clearly labeled "bootcamp", i saw only one partition. not wanting to risk writing over my mac partition, i quit the setup and rebooted the mac os. after some googling around, i looked for firmware updates (didn't need any), and then software updates. i decided to try updating to 10.5.1.
    i then ran through boot camp again, deleting my previous windows partition, creating a new one, and moving forward as before. once again, i was only shown one partition to choose from in the windows setup. i exited the setup again to reboot through the mac os, but this time, i was only given a blank gray screen.
    here's what i have tried so far:
    booting from a CD, holding down the C or D keys: no response (in fact, i have to restart the computer holding down the mouse button to be able to eject the CD)
    booting with option key held down: gray screen
    booting with option key held down with external bootable firewire drive attached: the firewire drive appears as a boot icon, and i can click on it within a five second window, but then the screen freezes after that time period, and nothing changes
    booting into target mode while attached to another mac: gray screen (no firewire icon, and drive never shows up on other mac)
    resetting NVRAM: i'm able to hear the boot chimes, but no difference in performance. gray screen every time
    Safe boot: nothing but a gray screen
    Verbose mode: gray screen
    Single user mode: gray screen
    Single user mode with firewire drive attached: occasionally (not every time), i am able to get the white on black terminal to show up. from here, i'm able to run fsck, but it appears to only be checking the firewire drive. i have tried several times to boot from here, and once it took me to a blue screen with movable arrow cursor, but it never went beyond this.
    is there anything else left to try before taking it to apple?
    any help would be greatly appreciated.
    thanks,
    Casey Burns
    Casey Burns Illustration and Design
    http://CaseyBurns.com

    I'd call Apple support at this point. You'll need
    to put this issue on the record.
    Call U.S. iPod and Mac technical support: 1-800-APL-CARE (1-800-275-2273)
    The wait may be long for an agent to come on the line
    so expect that and have some other stuff to do in the meantime.
    If you have the applecare protection plan, I'd ask about "onsite"
    service.
    I like your work ! Good luck !
    Slim
    Message was edited by: slimpikkunz

  • My granddaughter put the Start Up Disk in the drive inadvertently and now the drive will not eject it or start up using the HD.  I have tried all of the suggestions for opening it that appear in the manual.  Help?

    My granddaughter put the Start Up Disk in the drive inadvertently and now the drive will not eject it or start up using the HD.  I have tried all of the suggestions for opening it that appear in the manual.  Help?  It is her computer, a iMac G3 or G4 with superdrive, the one with the ball shaped base.   Thank you.

    It's a tray loading drive, there should be a little hole next to it, just large enough for a paper clip.  Stick the end of the paper clip in it and the tray should open.
    Miriam

  • IMac will not boot up. Need to transfer data iMac (2006) iMac (2009)

    I have an iMac (built/sold late 2006 -400  Firewire) and an iMac (built/sold late 2009 - 800 Firewire).
    I have connected computers with a 400 to 800 Firewire cable.
    The old iMac will not boot to desktop. It was suggested to hold down the "T" key and then power up the iMac. This was done and the old iMac shows a "Y" shaped icon that appears to be a Firewire icon. The old iMac does not show up on the desktop of the new iMac.
    I would like to transfer data from the old iMac to the newer one. Suggestions ?
    Thanks.
    old iMac OS 10.4.xx
    new iMac OS 10.9.2

    She's holding T down on the old computer.
    Which is the way it has to be done. The old computer's hard drive will mount on the new computer.
    To use FireWire target disk mode
    Make sure that the target computer is turned off.
    If you are using an Apple portable computer such as a PowerBook or MacBook as the target computer, plug in its AC power adapter.
    Use a FireWire cable to connect the target computer to a host computer. The host computer can be powered on.
    Start up the target computer and immediately press and hold down the T key until the FireWire icon appears. The hard disk of the target computer should become available to the host computer and will likely appear on desktop. (If the target computer is running Mac OS X v10.4 Tiger, you can also open System Preferences, choose Startup Disk, and click Target Disk Mode. Restart the computer and it will start up in Target Disk Mode.)
    When you are finished copying files, locate the target computer's hard disk icon on the desktop of the host computer and drag it to the Trash or choose Eject (or Put Away) from the File menu.
    Press the target computer's power button to turn it off.
    Unplug the FireWire cable.
    (my emphasis).
    Excerpt from:   http://support.apple.com/kb/ht1661
    The terms are Target and Host. The old iMac is the Target, the new one is the Host.

  • My 2011 IMac will not boot up past the White apple logo screen with the whirly circle

    My 2011 IMac will not boot up past the White apple logo screen with the whirly circle. I have tried various commands but to no avail. does anybody have any advice?

    Take each of these steps that you haven't already tried. Stop when the problem is resolved.
    Step 1
    The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
    There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
    a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
    b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
    c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
    Step 3
    Sometimes a startup failure can be resolved by resetting the NVRAM.
    Step 4
    If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
    Step 5
    If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
    Step 6
    Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
    Step 7
    If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
    Start up in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Post for further instructions.
    Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
    If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
    If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
    Step 8
    Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
    This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
    Step 9
    If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.   
    Step 10
    Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
    Step 11
    Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
    Step 12
    This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
    Step 13
    If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

  • ITunes 10 will not eject a CD

    After I have import sa CD into iTunes, the CD will not eject from iTunes.  If I use the eject keyboard key, or move the CD to trash, I receive a message THE DISK WASN'T EJECTED BECAUSE ONE OR MORE PROGRAMS MAY BE USING IT.
    So I FORCE EJECT and that does it (only after a message stating I may damage the contents of the CD).
    Any ideas?
    The iMac is brand new and using Lion.
    Many thanks

    7 september 2010
    For some reason (Firewall / Internet security programs?) the Apple iTunes installation program doesn't install all the necessary components.
    There is a way to manually unpack the installation program to it's 6 different components and install each component one by one.
    (Advantage: you don't need to uninstall or deactivate your security programs)
    Best thing to do is:
    1) Download the iTunes installation program (directly from the Apple website
    http://www.apple.com )to your desktop,
    WITHOUT INSTALLING the iTunes application.
    2) Download he WinRAR decompression/unpack utility (for example from:
    http://download.cnet.com/WinRAR-32-bit/3000-2250_4-10007677.html?tag=recommended Downloads )
    and install it on your desktop for easy use.
    3) Unpack the iTunes installation program, using WinRAR by rightclicking the
    iTunes installation program and choose 'Open with WinRAR'.
    Don't bother with the message from WinRAR about files beïng corrupt
    (these are probably the unreadable 'Apple Mac' files).
    4) You'l see that the original iTunes installation program consists of 6
    different installation programs.
    4 utility programs (necessary for iTunes to work correctly)
    - Apple Application Support (Version: 1.3.2)
    - Apple Software Update (Version: 2.1.2.120)
    - Apple Mobile Device Support (Version: 3.2.0.47)
    - Bonjour (Version: 2.0.3.0)
    and 2 main programs
    - Quicktime
    - iTunes
    Copy these 6 programs to your desktop with WinRAR,
    where they will appear unpacked.
    5) Install each program one by one IN CORRECT ORDER:
    - First the 4 utility programs, one by one.
    - Following this, install QuickTime.
    - Install iTunes as last.
    6) Check the Windows installed programs list to see if they're all installed.
    You can check the versions of te programs by clicking the information toolbar
    for each program.
    Good Luck..!

  • IMac will not get past chime & white screen

    iMac will not get past chime & white screen. I have tried all the start up key combinations I can think of (d or c etc) with a start up disc, but no joy. The disc drives seems ok - you can hear it working & it will eject OK.
    Any other start up ideas, please?

    Have you tried a safe boot? If not, hears how (it's straight from Mac Help):
    To start up into Safe Mode (to "Safe Boot"), do this:
    Be sure the computer is shut down.
    Press the power button.
    Immediately after you hear the startup tone, press and hold the Shift key.
    Tip: The Shift key should be held as soon as possible after the startup tone but not before.
    Release the Shift key when you see the gray Apple and progress indicator (looks like a spinning gear).
    During the startup in Mac OS X 10.2 through 10.3.9, you will see "Safe Boot" on the Mac OS X startup screen.
    During the startup in Mac OS X 10.4 or later, you will see "Safe Boot" on the login window, which appears even if you normally log in automatically.
    To leave Safe Mode in any version of Mac OS X, restart the computer normally, without holding any keys during startup.
    To learn more about Safe Boot check this page:
    http://docs.info.apple.com/article.html?artnum=107392
    Intel iMac (Early 2006)   Mac OS X (10.4.8)   2.0 Ghz, 1 MB

  • I have a dvd that will not eject - what do I do to get it out?

    There is a dvd in my iMac that will not eject - How do I get it out?

    Start by using these tips:
    http://computers.tutsplus.com/tutorials/quick-tip-how-to-force-eject-a-stuck-dis c--mac-31662
    Shutting off my iMac and rebooting does the trick for me, every time.

  • DVD Will Not Eject, iDVD Restarts Itself Over and Over

    I have a DVD that simply will not eject itself no matter what. Instead, it starts to eject, then iDVD starts up, and begins to play the DVD. I have unchecked "Start DVD" in iDVD's preferences and reviewed the forum articles about stuck DVDs. Reboot does not help Safe Boot does not help. Restart wth right mouse button held down does not help, perhaps because my mouse is Apple and there is no Right Mouse Button?
    I'm not about to enter terminal commands because I have no idea of what I'm ding at teh system level. Any ideas?
    Thanks if you can help, Signed:
    Desparate in Va.

    HI,
    Try restarting your iMac while holding down the eject key.
    If that didn't help, open Disk Utility (Applications / Utilities).
    Select the disk on the left side of the window then click the Blue eject button in the menu.
    Carolyn

Maybe you are looking for