IMac will not print to a wirelessly connected HP C7200 on Airport Extreme

I just bought an iMac 24 and an Airport Extreme.
I also have an HP Photosmart C7200 wireless printer.
Both the iMac and the printer communicate with the AE just fine, individually.
I also have a Windows laptop that is wireless.
The laptop can print to the HP printer.
However, when I try to print something from my iMac, I get a message in the print queue window that says the printer is busy. But it is not busy in reality.
The wireless printer has a specific web address. the iMac recognizes the printer and I can even get into the printer's web server and see all of the functions.

iOS devices require AirPrint to print directly to a network printer. That would mean that the printer would need to be AirPrint-Ready. The only other option would be to use something like PrintCentral Pro (as you have) to allow printing. Another software solution would be Printopia and you may find better results using it instead.

Similar Messages

The following letters will not print on my wireless keyboard: q,w,e,r,t,y,u,i,o. All the other keys are fine.

The following letters will not print on my wireless keyboard: q,w,e,r,t,y,u,i,o. All the other keys are fine.

Keyboard/Mouse – Troubleshooting Wireless
Keyboard Doesn’t Work
Keyboard Keys Do Not Respond

My iMac will not print to my Canon MP640

My iMac will not print to my Canon MP640.
I have downloaded and installed latest drivers from Canon. I have spoken with Canon and all they advise is to ensure I have current drivers (which I have).
The iMac will occasionally print to the MP640 but only after turning the printer on and off several times and sending and cancelling the print a number of times.
I have tested printing using a colleagues Canon printer and the WiFi printing works fine.
Please help.

Mike - unfortunately I couldn't get this to work.
I held down the option key and pressed "-" but I didnt get an option to reset the printing system.
Is there any other way I can get to this option (I have already tried opening the printer utility page but that doesn't give me any options either)?

My photosmart D110 printer will not print at all wireless or when connected; the printer will copy .

My D110 Photosmart printer will not print when I want to have something printed from my laptop; I have made sure everything was connected. I have lost the the disk that came with it. Please help the serial# {Removed for privacy}
Thank You, Kevin Jackson

What operating system? Running the diagnostics at http://www.hp.com/go/tools may help resolve the issue.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

My iPad will not print to my wireless hp office jet 6600 anymore

MY iPad will no longer print to my wireless hp office jet 6600 printer

Hi Everyone,
Don't spend too much time trying to figure this out. Apple has total control of what apple products can do. Since the upgrade to IOS my 6600 HP printer no longer is recognized by my Ipad. Just to add insult to injury my Iphone's wifi is now greyed out and I can no longer use wifi.
I didn't see this coming but think about how apple can force you to upgrade to other products by simply limiting a device's capability through an operating system upgrade.
I made an appointment with an Apple genius today and they said "Sorry this is a hardware issue (Iphone) and you will need to upgrade." Of course I will, a $700 phone or Ipad should only last a couple of years... right?
I am not upset but I will be more critical in my future purchases of Apple products.

Ipad will not print from safari on connected air printer

i can printed pages from email, but when I choose a coupon and it opens in safari, the bos with the up arrow does not open up to print or to send, egc.

I Meant that I can not print - am unable to print. . .

I have a new MacBook Pro that prints fine with my upstairs computer, but the IMAC will not print through the AirPort

I have a Canon printer (USB), in my office. I plugged it in to the back of the Airport Router. The downstairs new MacBook Pro can print with either of my two printers upstairs with no problem. The IMac upstairs can not see the Canon printer at all. When I go to Print & Fax settings, it does not see the printer! How can I solve this?
THANKS!

You will need to get on the Canon website and download the latest drivers for your printer on the iMac.
That's really about all that you can do.

HP Deskject 3050 will not print on my wireless network

Help please. I have been unable to print from the deskjest 3050 on my wirless network.

Brose, if you have a new router then you would have a new SSID. You will have to re-install the printer via USB and then convert the printer to wireless using the software on the computer. You can also remove the software form your computer and download it here :
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&dlc=en&product=4066452
Do that and let me know how it goes!
-Spencer
Have a wonderful day!

IMac will not boot with external monitor connected

Hi everyone,
I have a mid 2010, 27" iMAC. If I connect an external monitor to the Mac (using display port), everything works as it should. If I try to reboot or do a cold boot while the external monitor is connected the system boots to a white screen and no further. Sometimes I get 2 spinning colored wheels, but nothing more. If I let it sit at the white screen long enough the screen saver kicks in and everything goes black, move the mouse or hit a key and the white screens come back.
I've tried a few things (that I've found on-line) but I'm an old PC user (25+ years) so I'm not used to or know all the tricks or what I really should be trying.
I just upgraded to Mountain Lion thinking maybe that would help, but no change.
Any help would greatly be appreciated.

Sorry about my lack of details, I am using the Apple brand of display port to DVI adapter, a DVI cable that is plugged into an ACER 26" monitor (not sure of the model nuimber right now as I am at work). This monitor and DVI cable worked fine during reboots/shutdowns, etc while connect to 2 different Intel based PC's that I have that also run dual monitors. As I mentioned I've done PC work for many moons and would know how to check for drivers, etc, but now in the Apple environment I am lacking these same skills. So I've done all the standard stuff, switching known good cables etc, but I am unsure of how to uninstall drivers and those type of tasks if need be. I know it could be a monitor problem, but that same monitor works fine while connected to the PC's that I have.

H.P.ENVY4500 WILL NOT PRINT UNLESS WIRED CONNECTION IN PLACE

Have just purchased H.P. ENVY 4500 and connected to computor using WiFi-no problem.After connction found it would not print from documents etc.Tried to install disc but this would not start so whent into H.P. website for installation.this installed but then said could not install over network.I'm not very techy so this has me baffled.Then decided to wired connection between printer and computer and this works ?? Wife has a laptop using WiFi and printer responds to this just using WiFi.WHY?? Very grateful if someone can give me some idea as what to do.Many thanks.

Hi @KIP7,
Welcome to the HP Forums!
I understand that your HP Envy 4500 will not print on a wireless network, and I am happy to help!
For further assistance I will need to know: If you are using a Windows or Mac Operating System, and the version number. To find the exact version, visit this link. Whatsmyos.
In the meantime, I would suggest to go through this printing guide. Print Jobs are Stuck in the Print Queue. As it addresses the fact that the printer will not print.
Hope this helps, and hope to hear from you soon!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Photosmart 6510e will not print wirelessly to computer

Hi I have a HP Photosmart printer, but it will not print to computer wirelessly, I have run all tests I can think of have ptinted off a wireless net work test report that says everything has passed,, signal quality excelent and so on. but when I try to print from the computer I get a message cannot find computer.
I have also down loaded HP print Doctor and run it it says everthing OK would you like to print a test page? click yes "sendind to printer" same message comes up no connection.
can anybody help before I reach for the hammer
Bingham

What router? What operating system?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

HP Laserjet 4100 on network will not print

Since I’ve installed Snow Leopard, I have not been able to print with my HP Laserjet 4100.
My set-up: new 24” iMac, many hard drives and more. Two devices: HP Color Laserjet 5550 and HP Officejet J5750 are connected to the iMac through a USB Hub. Although initially scanning did not work with the J5750, I was able to make that work once additional drivers were downloaded from HP. Both work fine.
I also have an older HP Laserjet 4100 which has been my steady workhorse for years. It only has Ethernet and serial port outlets. It is connected to an AT&T 2-Wired Ethernet Hub/DSL Modem (model 2701HG-B) that is connected to the iMac.
I’ve contacted HP and Apple about this problem. None of the three people I worked with at Apple could help and the HP representative was unsure if they could help but that it would cost me $40 to find out. According to HP website, since Apple Talk no longer exists, we are required to input the IP for the device. For the 4100, the IP address is 10.0.1.100. I tried this two ways: in the “Add Printer” window under “IP,” inputted as the IPP, and inputted as the HP Jetdirect Socket (as per the HP instructions). When this is done, the printer shows up when you give a print command. However, it does not show up in the “Add Printer” window under “default” or anywhere else.
Status: If I connect the 4100 Ethernet cable directly to the back of the iMac, the “Supply” level indicates the true level of toner in the 4100. However, it will not print. If I connect the 4100 Ethernet cable to the Ethernet hub, the supply level does not show nor can I print.
Any suggestions?

I am struggling with the same problem. I have two HP 4100dtn printers on ethernet. Each has a manually assigned IP address. I can set up the printer(s) just fine in the Print & Fax Preference and Snow Leopard finds the printer just fine when I enter the IP address and chooses the correct HP Driver.
When I try to print, my print job appears in the queue as expected, than an error appears that something about a "bad command". Sorry, I'm home right now and don't have direct access to the printer so I can't give you the precise language of the message, but the gist of the message is that the system tried to connect to the printer to send the print data but the printer does not know how to respond to the command that was sent.
It's as if the firmware in the 4100 just doesn't have something in it's lexicon that Snow Leopard needs. The HP web site is no help. One page I found says the printer is supported (http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&obje ctID=c01664444&jumpid=regR1002USEN ) and another page I found says that it is not supported (http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&obje ctID=c01879014&jumpid=regR1002USEN). The HP on line chat won't let me log in and hold a chat with HP unless I know the Serial Number of the printer, which I don't have here at home.
More to follow tomorrow.
Anyone have any ideas?

HP Laserjet 4100 will not print in Snow Leopard

Since I’ve installed Snow Leopard, I have not been able to print with my HP Laserjet 4100.
My set-up: new 24” iMac, many hard drives and more. Two devices: HP Color Laserjet 5550 and HP Officejet J5750 are connected to the iMac through a USB Hub. Although initially scanning did not work with the J5750, I was able to make that work once additional drivers were downloaded from HP. Both work fine.
I also have an older HP Laserjet 4100 which has been my steady workhorse for years. It only has Ethernet and serial port outlets. It is connected to an AT&T 2-Wired Ethernet Hub/DSL Modem (model 2701HG-B) that is connected to the iMac.
I’ve contacted HP and Apple about this problem. None of the three people I worked with at Apple could help and the HP representative was unsure if they could help but that it would cost me $40 to find out. According to HP website, since Apple Talk no longer exists, we are required to input the IP for the device. For the 4100, the IP address is 10.0.1.100. I tried this two ways: in the “Add Printer” window under “IP,” inputted as the IPP, and inputted as the HP Jetdirect Socket (as per the HP instructions). When this is done, the printer shows up when you give a print command. However, it does not show up in the “Add Printer” window under “default” or anywhere else.
Status: If I connect the 4100 Ethernet cable directly to the back of the iMac, the “Supply” level indicates the true level of toner in the 4100. However, it will not print. If I connect the 4100 Ethernet cable to the Ethernet hub, the supply level does not show nor can I print.
Any suggestions?
Chuck Stewart
< Edited by Host >

Well, another week has gone by without a solution.
Again, here is the problem:
I have a 24" iMac connected to a USB hub and an AT&T 2-Wire DSL/ethernet hub. When I upgraded to Snow Leopard 10.6.1 and now the update 10.6.2, the two printers on the USB hub work fine but the HP Laserjet 4100dtn does not print. This old printer has only ethernet or serial ports. I've downloaded and installed the HP driver updates from Apple and HP to no avail. According to HP, I must add the 4100 manually using its IP. I've followed the instructions while adding a printer to select IP- HP Jetdirect - Socket. The address of the printer is 10.0.1.100. When I type this in, the window says that this is a valid and complete address. It searches and then says the "Print Using:" is a Generic PostScript Printer. The driver for this printer, I believe, should be "HP LaserJet 4100 Series v.3010.107" Regardless, when I click Add the window "Determining Installable Options" shows "Status: Connecting to printer..." It never establishes a connection.
The 2-Wire DSL/Ethernet Hub/Modem, has an IP of 192.1687.1.66, Submask 255.255.255.0 and Router (DNS) 192.168.1.254.
If I plug the ethernet cable directly from the printer to the iMac, the supply level shows correctly but will not print. If I plug the ethernet cable from the printer to the 2-Wire and then to the iMac, it neither shows supply level nor prints.
Any suggestion as to how to fix this problem? (I've been on the phone with 3 different Apple respresentatives and 1 HP representative with no success.)

HP Officejet Pro 8600 Plus will not print from my MacAir

I have used my MacAir to print on my HP Officejet Pro 8600 Plus for about 5 months without any problems. All of a sudden my printer will not print. The wireless icon says it's connected to the network. But when I click print it says "looking for air printer" and then "printer not connected". I've repeated the Wizard Set Up for the wireless connection. I've turned the printer and computer on and off. I've even tried printing from my iPhone but it will not find the printer anymore. Please help!

Hello @ladybonds ,
Thank you for taking the time to post on the HP Forums today! Hope you enjoy the experience.
You are saying that you have been printing fine from your computer for 5 months and now your printer says it is connected to the network and your computer says that it isn't.
Have you recently upgraded to Yosemite the new Apple OS? If not what OS X are you using?
Are you sure that the printer and your devices are on the same network?
Does the router give your printer an I.P address?
Let me know these answers and we can go from there.
I worked for HP.

Is there any way to print from the iPAD 3 to a HP LaserJet P2055dn? I called Applecare and was told I could not print to my wireless HP Printer.

I own a iPAD 3. It will not print to my wireless printer: a HP LaserJet P2055dn. I called Applecare and they had no solution. I don't see such a basic function--printing--is not available. Does anyone have a way to print from the iPAD 3 to a HP LaserJet P2055dn?

iOS AirPrint Printers http://support.apple.com/kb/HT4356
How to Print from Your iPad: Summary of Printer and Printing Options
http://ipadacademy.com/2012/03/how-to-print-from-your-ipad-summary-of-printer-an d-printing-options
Print from iPad / iPhone without AirPrint
http://ipadhelp.com/ipad-help/print-from-ipad-iphone-without-airprint/
How to Enable AirPrint on a Mac and Use Any Printer
http://ipadhelp.com/ipad-help/how-to-use-airprint-with-any-printer/
 Cheers, Tom

IMac will not print to a wirelessly connected HP C7200 on Airport Extreme

Similar Messages

Maybe you are looking for