IMac won't boot after install of itunes 7.6 with ipod connected

Just an FYI for anyone that comes across this issue. If you do, just disconnect your
ipod and the system will boot up.

Hi Dean, and a warm welcome to the forums!
Unbeknownst to you, you had problems on your HD before the update.
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot.
The usual reason why updates fail or mess things up, is if Permissions are not fixed before & after every update, with a reboot... you may get a partial update when the installer finds it doesn't have Permissions to change one obscure little part of the OS, leaving you with a mix of OS versions.
Some people get away without Repairing Permissions for years, some for only days.
If Permissions are wrong before applying an update, you could get mixed OS versions, if Directory is the slightest messed up, who knows!
If many Permission are repaired, or any Directory errors are found, you may need to re-apply some the latest/biggest updates again, or even do an A&I if you have enough free disk space.
An Archive & Install, which gives you a new OS, but can preserve all your files, pics, music, settings, etc...
http://docs.info.apple.com/article.html?artnum=107120

Similar Messages

Computer won't boot after installing latest iTunes update

Won't boot after the apple screen. Turns black and disk stops Help! Was running Mavericks.

Hi Neodoc,
Welcome to the Apple Support Communities! I understand that your MacBook Pro will not boot past the Apple logo. There may be a few troubleshooting steps I would recommend for this situation. The following article outlines the steps to perform to get this resolved for you.
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/ts2570
I hope this helps,
-Joe

IMac G4 won't boot after install of iTunes latest update

I just updated my iTunes software via download. I have the iMac configured to ID when new updates are available. After download I selected the "restart" option. Computer shut off and upon power up will not proceed past blue start up screen with the progress bar and "starting MAC OSX...." text. I have tried power down/power up. It has been at least an hour and still on blue screen. I have never had a problem in 5 years. Any ideas?

Hi Dean, and a warm welcome to the forums!
Unbeknownst to you, you had problems on your HD before the update.
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot.
The usual reason why updates fail or mess things up, is if Permissions are not fixed before & after every update, with a reboot... you may get a partial update when the installer finds it doesn't have Permissions to change one obscure little part of the OS, leaving you with a mix of OS versions.
Some people get away without Repairing Permissions for years, some for only days.
If Permissions are wrong before applying an update, you could get mixed OS versions, if Directory is the slightest messed up, who knows!
If many Permission are repaired, or any Directory errors are found, you may need to re-apply some the latest/biggest updates again, or even do an A&I if you have enough free disk space.
An Archive & Install, which gives you a new OS, but can preserve all your files, pics, music, settings, etc...
http://docs.info.apple.com/article.html?artnum=107120

Macbook pro won't boot after installing update 10.9.3

macbook pro won't boot after installing update 10.9.3

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

IMac won't boot after power outage

I got a power outage a couple of hours ago. And now my iMac won't boot. When I power it up, it gets pass the white screen with the apple logo. The screen than turns blue with a spinning cursor. The cursor spins for about 10-15 minutes and stops but the normal login screen never appear and it won't boot into the desktop either. I just got a blue screen.
I have boot into the install Disc1 and did the disk repair and premission repair but it didn't help.
Any idea?
Sidney

Oh man, what a disaster!
I tried to do an Archive and Install but the installation hanged at the end of disc 2 after running an iWeb script (according to the install log) with about one minute left. I have waited for two hours but it just hanged there with all the drives spin down.
To make the problem worse. There was no way to quit the install at that point because all the menu items were disabled. The only way out was to power off. But when I powered it back on, it booted right into install directly asking for the disc 2. If I put the disc in it will install again and hang at the same spot.
Disc 2 contains iLife. I know Apple wanted to make things simple but why can't they give me an option to skip it? After all, iLife was already installed.
I finally got it working by booting from disc 1 and did a clean install. It took me all night to re-download all the updates and reinstall many applications. Fortunately, I have my address book, calendar, and most of my works backed up to .Mac so it wasn't a total lost.
On the bright side. Now my iMac is working better than before. I used to have problem getting auto sleep to work but now it works perfectly. Safari also had problem accessing charts (but Camino was fine) in a few web sites like schwab.com. Now everything works.
Lenn and David. Thanks for all your helps.
Now I am looking for a better backup solution so that the recovery won't be this painful if disaster strikes again. Any suggestions?
Sidney

IMac won't boot after trying to migrate files to macbook?

While trying to migrate info from my IMAC to my Macbookpro all work froze on both puters. Macbook starts and runs alright. But my IMAC won't boot at all. Tried startup disc and it won't get past picking a destination because it doesn't list one. I made a boo boo hear and need help fixing this.

Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Install OS X.

IMac won't boot after power failure during 10.5.6 update

Help!
Tried to update last night and at something like 80% install, we had a power cut. iMac won't boot at all now - get to a grey screen which tells me to restart. Don't have a wired keyboard. If I did - what are the steps to get this working again.
I believe I have a good backup, but don't want to risk as all the family photos are on the iMac.
Thanks in advance.

Thanks for the help, but can't even get to a screen where I could type anything! I know I'm being dumb here.

My Mac Pro won't boot after installing the latest update

Im running the latest OSX on my mac and recenty did a small updated that i believe contain a few security thing and bug fixs but when restarting the machine after the update it would not boot again after the apple logo has appeard apple script is displayed on the screen contain what i think is boot script failing to run. I have been able to boot the system in safe mode. does anyone have and solution for this as i realy don't want to reinstall the OS
Thanks

The most common cause for "Won't boot after software Update" is Directory Damage that existed before the Update, but was made worse by adding files during the Update.
The most common cure for that Directory Damage problem is to boot in Safe Mode, which takes five minutes to repair the disk, then comes up demanding your username and password, even if you normally auto-login.
Rarely, third-party add-ons are made obsolete by an update. In this case, booting in Safe Mode (with few Apple extensions and NO third-party extensions loaded) works fine, even if normal mode does not work.
Have you tried normal mode again after your Safe Boot?

IMac won't boot after updates,have to reinstall loin from recovery drive

I have a 27" iMac running 10.7.1 and love it, but every time I do a software update it won't boot, it just goes to white screen with spinning gear forever! I let it set there for an hour and it never changed. I've tried restarting it but it just stops at that point,so I have to restart holding cmd-r to go to the recovery partition and have it reinstall loin,i've tried reparing the drive and perrmissions but it still wont boot unless i reinstall loin. I have five other macs running loin with no problem, so why just my imac?

Hopefully you have AppleCare. If so, call Apple to see if this if you are afflicted with the dreaded motherboard problem.
BTW, this area is for discussing iMac G4s. Since you have an iMac G5 you will probably want to make future posts in the iMac G5 discussion area.

IMac won't boot after Lion install

I have an Intel iMac circa 2007/2008. I just installed OSX Lion on it. After installation, the computer would beachball frequently and eventually froze completely. I had to do a hard-reset as the system was completely unresponsive.
Now the computer won't boot up. It gets stuck at the grey screen with an Apple and a spinner at the bottom.
Please help; this computer runs my small business.

How much RAM is installed? Lion will run much better with at least 4 GBs of installed RAM.
I would guess you updated from Snow Leopard and that Snow Leopard was not in good shape. Reinstall Lion to see if this fixes things for you:
Reinstalling Lion
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alterhatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Continue button.
Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.

IMac won't boot after iTunes Match - Get diskos2 i/o error. Help!

So after almost 24 straigth hours up uploading songs to iTunes Match, I woke up this morning and my iMac wouldn't boot. Gets stuck on the gray screen with the apple logo. I booted in verbose mode keep getting a "diskos2 i/o error." With a little googling some people say it's a bad sector and to erase and reinstall Lion others say it's a failing hard drive. Disk Utlity in Recovery Mode says the drive is ok. Any thoughts out there on what I should do? Thanks!

I am having the same problem. The machine loads just to the point when it says "Loading Mac OSX", then its non responsive for hours. The keyboard and mouse still work, but it won't move past that point.
When I try to repair the disk, it gives me an error message indicating that the disk cannot be repaired. I am bad at backing up my files, so I want to avoid a fresh reinstallation.
The worst part is I had just purchased Disk Warrior, and that won't boot up.
If no solutions are found, does anyone know a way that to initiate the computer in disk mode, so I can hook up another Mac to it, and save all the files?
-alfredo

Imac won't boot after update

hi guys i am new to macs I bought this for my daughter and tried to update.The update said to hold the program button and push power,well now she won't boot up just a grey sreen and what looks like a file with a blinking question mark and a face..
I have a imac g3 400mhz with 256mb ram
osx and 9.2 i belive any help appreciated

The flashing folder icon is your iMac's way of saying, "where is my OS? I can't find an OS!" If this appears briefly and goes away, it's usually because the PRAM was reset recently. The 4.1.9 firmware does reset your PRAM in the process--but only if successful in its task. To fix this temporary hiccup, open the Startup Disk control panel and select the hard drive, then click Restart.
If this icon continues to flash, there are some steps you can try.
1. Reset the PRAM via Command (Apple)Option+PR at startup. Hold the keys down until the Mac chimes thrice. If your Mac starts normally after the third chime, end here.
2. Reinitialize the firmware. Enter Open Firmware mode (CommandOption+OF) and issue the following, pressing Return after each command:
reset-nvram
set-defaults
reset-all
If successful, the Mac should reboot itself. Stop here if this solves the problem.
3. If you have the iMac restore disc, or a disc with OS 9.1-9.2.1, boot it and run Disk First Aid from the Utilities folder to repair file structure errors. If you have DiskWarrior or TechTool Pro Classic, you will be able to do more thorough repairs.
4. If all of the above fail, you can reinstall OS 9 if you still need to do the firmware upgrades, but you should reinitialize the hard drive with Drive Setup if you also want a clean install. Drive Setup can be found in the CD's Utilities folder.
Nate

IMac won't boot to install disk, normally or in safe mode! Please help

Hi everyone,
I'm using my iPhone so please excuse any spelling or grammatical errors.
I have a 27" quad-core iMac bought about a year ago.
Today I went to reformat the harddrive as I'm selling the machine to a friend. First the iMac would not boot to the install disk - it just gets stuck on the apple logo screen, but with no spinning wheel - now it won't even start up normally! I've attempted to start up in safe-mode but again it gets stuck on the apple screen and there's a strange clicking noise, which sounded like it was coming from the cd drive area.
It's a shame this happened today, right before I was supposed to give the computer to it's new owner. I really don't want them to think I was trying to sell them a computer with problems.
I've tried a basic hardware test and it came back with no problems.
Can anyone help?

Try using the original Install Disc that came with the machine, do not try any other DVD. Put it in the SuperDrive, while holding down the power button also hold down the Option button on the keyboard. It should start and give you the option of starting from either the internal HD or the Install Disc. Choose the Install Disc, select the language, choose the Utilities Menu, Disk Utility, then select the internal HD, select the Erase tab and set it to Mac OS Extended (Journaled) and click erase. Then exit Disk Utility and continue with the install process to reload OS X.
Roger

Problem with HP Media Centre M7670.UK-a - won't boot after installing an update to Apple Quicktime

I just installed the latest update to Apple Quicktime (after an update message appeared on the screen). When asked if I wanted to re-boot the PC now, I clicked on Yes.
Now the computer won't boot. The power light comes on, then the disk drive light flashes for a moment, then nothing else happens and the PC starts to beep. The beeps are repeating, with 2 short beeps and one long beep. What do the beeps mean?
This question was solved.
View Solution.

Then a clear CMOS would be the next logical troubleshooting step.
Here is a link to your motherboard specifications.
The information on clearing CMOS is at the bottom of the document.
This is usually the last step before giving up on a motherboard.
The problem you are facing is motherboard hardware firmware related.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Early 2008 Mac Pro won't boot after installing 2nd DVD drive

All,
I purchased a Pioneer DVR-117D from Mac Sales and after installing it in my new refurbished 2008 Mac Pro it won't boot. My MP will boot if I remove the drive. According to the Mac Sales website this drive should work fine in my MP. Any ideas as to why this is happening. I literally just got my MP today and installed the drive. Is it the drive or the Mac Pro. Thank you all.

The drive was set to master, I switched it to CS before I left for work but haven't tried reinstalling it. I will try when I get back and let you know if it worked. Thank you again.

IMac won't boot after install of itunes 7.6 with ipod connected

Similar Messages

Maybe you are looking for