IMAC won't play audio CD's

iMAC MATSHITA DVD-R UJ-875 won;t read audio CD's. Reads DVD's and data CD's fine, but won't read/play audio CD's. Insert an audio CD, whirls around a bit then spits it back out after about 10 seconds.
I reset the PRAM and NVRAM, http://support.apple.com/kb/ht1379
Reset the SMC; http://support.apple.com/kb/ht3964
I also did a zero-out erase and re-install of OSX. Nothing helped
I found this thread about cleaning the lense with a credit card and a soft cloth, but didn't work either.
http://muzso.hu/2008/08/17/how-to-clean-the-lens-of-a-slot-loading-optical-drive -a-macbook-pros-superdrive
Any other ideas?
I had just cleaned out the garage, closets, etc and have a mountain of CD's ready to convert to MP3's. It's incredibly frustrating to say the least. Anyone know what they charge at the Apple store? Do they charge just to diagnose the problem?
~~~~~~~~~~~~~~~~
Hardware Overview:
Model Name:          iMac
Model Identifier:          iMac7,1
Processor Name:          Intel Core 2 Duo
Processor Speed:          2 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache:          4 MB
Memory:          4 GB
Bus Speed:          800 MHz
Boot ROM Version:          IM71.007A.B03
SMC Version (system):          1.20f4
Message was edited by: VPLNX

Go to: Apple / System Preferences / CDs & DVDs and make sure that "Open iTunes" is selected for When you insert a music CD:

Similar Messages

My 24" iMac won't read audio cds--ejects them after about 15 seconds

My 24" intel iMac won't read audio cds. It ejects them after about 15 seconds. I have virtually never played cds on this machine in five years. It plays dads with no problem. Anybody have any feedback. I also saw a fix by deleting some presence files.

I saw this on a forum from about four years ago:
Trash the following folders:
com.apple.kernelcaches (from System/Library/Caches
extensions.kextcache (from System/Library
CDInfo.cidb (from Home/Library/Preferences
Restart
Could this be a fix.
Unfortunately, I can't reset PRAM. I've done it a thousand times over twenty years,but my machine simply boots up without the extra chimes.

IMac won't play DVDs but will play CDs

For some reason my late '09 iMac won't play DVDs, at least not often. I was watching a DVD on it yesterday, left the disc in to go downstairs, and when I came back it wouldn't play again. It now doesn't even recognise that there is a DVD in it, but just spits it out again after a few seconds. I imported a couple of CDs to iTunes with it yesterday, it generally seems fine with CDs, but it has a big problem with DVDs. Any ideas on what I can do to solve this?

Hi Marcus
It sounds like the DVD drive heads have gone out of position and the drive needs to be replaced. Contact your dealer or Apple.
chris

Flash won't play audio. Please help!

To anyone who can help,
Flash won't play audio in Firefox, Chrome, Safari etc. Downloaded audio plays just fine but I can't stream any flash audio content. Does anybody have any solutions? Any help would be appreciated.
Regards,
Ben

I'm experiencing the same problem on Snow Leopard 10.6.8. If I go to YouTube, I don't get audio. Other websites are fine (I'm not seeing a pattern on exactly which sites). What I had to do was uninstall Adobe Flash (I used the Adobe Uninstall utility). Now I have audio on YouTube, but now I'm getting a lot of 'missing plugin' messages from other websites. I've opened
To asiatic43, you can get the latest Adobe Flash at
http://get.adobe.com/flashplayer/

Imac won't play songs from my iPhone after I have authorised the computer

Imac won't play songs from my iPhone after I have authorised it

My solution was restoring my iPhone. Techs at Apple couldn't figure out why so I had to do a restore and worked after that. I know it's a pain and you have to reinstall all you stuff, but it worked for me. Hope this helps.

IOS 6.0.1 Safari won't play audio files. Error: "Cannot play audio file."

I recently updated my iPad to iOS 6.0.1, now Safari won't play audio files in any format. Error: "Cannot play audio file." Previously, it worked fine. I tried downloading and using GoogleChrome and Opera Mini, and these also won't play audio. What's up??

Solved the problem. It seems that once iOS 6.0.1 installed, it caused all of my browsers to mishandle audio files. When I reset the iPad, that cleared up the problem.
Before upgrading to iOS 6, my browsers would "autoplay" the sound files. After iOS 6, "autoplay" is disabled so you have to manually click play to play them.
Nonetheless, everything is working fine again except for "autoplay," which I can live with.

Elements 11 won't play audio mp3 from within slide show

I've created a slide show and have attempted to insert an audio mp3 file. Audio file shows that it has been added to slide show but it wil not play.
I've added the mp3 multiple ways, by using the add media -- audio from element organizer as well as by add media ---audio from file but it won't play
MP3 plays fine when I click on it from the organizer.
I've tested the mp3's that came with elements 11 and they play fine. What's the deal?

Is it from within the iTunes library? Try deleting album art and then adding the track again.

ITunes won't play audio with mp4 or mov video

I have wasted many frustrating hours now trying to get iTunes to play mp4 and mov videos but can't get any sound. A few months back it was working fine. Tried ALL the suggested fixes like uninstalling, updating and checking all the MIME/File boxes. When I went back to QT 7.5 and played the files independently of iTunes everything was fine. Quicktime 7.6, 7.67 & 7.7.1 do not play the audio independently or under iTunes and of course iTunes won't play video with QT less than 7.7.1. The same mp4 videos uploaded to my iPOD work fine. I currently have iTunes 10.5.3.3 installed on a Windows XP SP3 on an e-machines pc. Ideas please!!

I got this problem as well. Seems as soon as I moved to version 7.6 it stopped playing my video audio. My music plays fine, but my video audio is non-existant. It's not the file itself because I can play off my iPod (though not off my iPod through iTunes) just fine. I've done all the suggestions above and NOTHING has worked. Is there anything else we can find???

MacBook won't play audio/video

My MacBook won't play any audio or video. It also won't open iMovie and when I try to open a photo in iPhoto/Preview, it goes blank. I have tried updating it, reinstalling the flash, using firefox/google chrome etc. I have no idea what is causing this. Is there a way to fix it without having to actually take it into the Apple store? I would appreciate any suggestions! Thanks in advance!

Hi there thwatts,
You may find the troubleshooting steps in the article below helpful.
iTunes: Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/ts5209
-Griff W.

QuickTime 7 Audio Issue (Won't play audio in certain video clips)

I'm having a problem getting audio to play with clips in QuickTime 7, and it doesn't play at all in iDVD when I drag a clip in to burn a DVD. I'm also having problems getting Final Cut Pro to play audio from time to time. Is this being caused by a recent Apple security update or is there something else going on?

Quicktime Kirk,
I have downloaded another persons inquiry because it is exactly the problem I am having. Here is his post
"I make movies of cells and convert them to quick time and insert them into powerpoint for presentations for conferences. I never had a problem with this until I upgraded to office 2004 and now many (but not all) of my movies won't play. They seem to be there but when I click play they go white as though there is only the first image. I had saved them as cinepak and or jpeg A usually with image J or older ones from the original NIH image and I can't figure out what the problem is. I even upgraded to quicktime pro to resave them as self contained but still they don't work when I insert them. I can play them all with quicktime player and when I make new ones now in image j I save them as video and that seems to work but it would be very difficult to go back and do that with everything. Does anyone know why or how to fix this?"
My additional comments would be I used the Sample_iTunes.mov from QT and it plays like a champ in PPT. My movies are all from 2004. When I save them in the QT 7.1.3 it doesn't seem to make any difference. The older movies insert into PPT as a QT icon with 4 color quadriant. Everything including .swf are now working in QT. Thanks for your help. When I go back to 7.0.3 they work but then I can't play my videos in iTunes unless I do an erase and a reinstall to get rid of the updated iTunes. Thanks
Chris

80G won't play audio books or restore

I’m the owner of a week old 80G iPod which seemed ok till today. New up to date Win iTunes. Now I try to listen to any audio book that worked yesterday. The iPod seems to go into a auto reset operation, with the apple symbol showing, then returns to the select operation mode. I’ve tried listening more than a dozen times to several different audio books with the same results. All musical MP3s play fine. I tried manual reset with no positive results.
I tried RESTORE but constantly get a error message that it can’t connect to the server because I need to be connected to the internet??????????? I connect to the Apple store and other sites with no problem. I went to MY computer and tried a quick format and it did nothing, I probably should be grateful!
I just installed another 390Meg book which installed fine but again won’t play. It will not eject using iTunes or My computer saying it’s in use??????? I've shut it off for various times with the same results.
HELP I need some direction before I zap it totally. TYIA VIC

Come on, some hints PLEASE!!!

Captured video won't play audio

Hi, I hope someone can help! I'm very new to FCE4. When I capture digital video the audio won't play back in either the viewer or time line. The audio has captured though as I can play the clips in quick time or ITunes. Is there a setting for this or do you think it's a fault?

Hello and welcome to the forum.
Make sure you have Canvas Playback enabled. From the FCE menu bar, select View>Video Out>Canvas Playback.

Hp Pavilion dv7 won't play audio through HDMI

Hi i recently noticed my Pavilion dv7 entertainment notebook won't play sound through the tv anymore. The picture is on the tv but sound is running through the laptop speakers? I never had a problem with this until now. When i open up the sound options, the ATI HDMI output says it's not connected and so it wont let me select it, but it is connected? Please help?
Kind regards, Sez.
This question was solved.
View Solution.

Hi Sez,
Try using Recovery Manager to reinstall your AMD Graphics Driver package as this will also reinstall the AMD HDMI Audio driver- the procedure for using recovery manager to reinstall Software and Drivers is detailed in the relevant document on the link below.
Recovery Manager - Windows 8.
Recovery Manager - Windows 7
Recovery Manager - Windows Vista
After the reinstallation has completed, restart the notebook.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

FCO 10.2 won't play audio. Was fine in 10.1.4, projects open fine, the meter shows it playing, made all correct connections in Inspector, but no sound to system?

Since upgrading to FCP 10.2 from 10.1.4, I'm now not able to get sound even though it shows it's playing in the meter. The clip is a .wav 48k, I have highlighted the audio, gone into the Inspector, chosen Audio, in Pan Mode I've chosen Stereo Left/Right and made sure Stereo is selected on the file in the Channel Configuration. Solo does not help nor is skimming available.
All other audio apps are fine including Quicktime.
Also, I triedstarting a new Project and Importing audio, but the same result. Please let me know what I'm missing.
Is there a way to rollback to 10.1.4 to finish this project?
Thank you in advance for your reply.

Thanks Tom- shortly after I posted I read that and the multichannel change in the AudioMidi Setup was indeed the answer!
In reading through the posts, I see you have had answers to many issues so perhaps you help with this :
In 10.1.4, I had used an FX Factory effect for scrolling credits and now it won't play back on 10.2. If I highlight the clip, I have the ability to edit the text, but it won't play- any help is appreciated.
Is there a way to rollback to 10.1.4 to finish this project?
Thanks again, Tom

DVD on new iMac won't play

I'm trying to play a commercially made DVD on my new iMac with Mt. Lion. The preferences are set to play automatically when a DVD is inserted. The title page shows up, but it won't play. When I click the play button, the 'stop' button flashes momentarily, then shows the 'play' button again. I've tried to play it using menu commands, the space bar and hitting the play button. Each time the play triangle symbol flashes to the parallel lines, but goes right back to the play triangle. This is a new imac. I've not tried to play a DVD on it before. ANyone have any ideas?

Since you list your operating system as 10.7.4, I would guess that this is NOT a "New" iMac. 10.8 has been the installed OS on new systems for quite some time. Also the new iMacs releaased last month do not contain an optical disc device. If you need a DVD player (or recorder) you will have to buy an external SuperDrive (or other similar device).
Next thing when trying to play a DVD for the first time, there is normally a DVD Region selection window that opens. There are several regions in the world and the US and some other countries use region 1. You need to have admin privlieges to make the change. ALSO REMEMBER that there are only a total of five changes you can make to the region setting. Once you make the fifth change, and that number includes the first region you select, you are stuck with remaining on the fifth change you made.
Now if the region had been changed by someone previously and you are already on the fifth change and the region selected for the fifth change does not match your DVD;s region, well you are out of luck.
You may want to check on the region setting info here: http://support.apple.com/kb/HT2397
Note that the region code setting is hardware based and will not be changed by even a complete erase of the hard drive and reinstalling an OS.
Another thing to keep in mind is that recent updates to the OS will sometimes give "funny" results when you are using an external monitor (or projector). Copyright/Digital RightManagment will sometimes prevent display with anything plugged in to the Thunderbolt or MiniDisplay Port.

IMAC won't play audio CD's

Similar Messages

Maybe you are looking for