Imac won't read Cds

5-yr. old iMac: suddenly won't read CDs. It spits them out after 10-20 seconds with no error message.

Thanks everybody
I too have suddenly developed this failure to burn. Worked well last week, now doesn't even get to the multiplexing stage, just ejects the blank disk. Ejects original Leopard disk, won't write to CD with Toast 8. Couldn't even check the hardware diagnostic as it just spits the disk out.
Tried Unix single usere mode Command S to type in fsck -y after the prompt localhost# (p840 - The Missing Manual series Leopard) but never got to this prompt. Upgraded to lastest iMovie and iDVD
Tried your FINDER- PREFERENCES - TICKED THEM BUT THEY DON'T SHOW UP IN THE SIDEBAR. . Starting to look ominous. Here I am in the middle of the South Pacific with no Mac repair shop within 3000 km.
OR any other suggestions - may be "life saving" or this iMac is going on a long flight soon or could you send your father-in law.

Similar Messages

  • IMAC won't read CDs or DVDs

    Hello,
    I just got my iMAC setup and established today. Everything went fairly smoothly until I tried to insert and play a DVD with the side-mounted DVD drive. The drive physically took the DVD, but it always just cranks there for several seconds and then spits the disk right back out. This happens with regular data and music CDs as well. What am I missing?
    Thanks.

    Thanks everybody
    I too have suddenly developed this failure to burn. Worked well last week, now doesn't even get to the multiplexing stage, just ejects the blank disk. Ejects original Leopard disk, won't write to CD with Toast 8. Couldn't even check the hardware diagnostic as it just spits the disk out.
    Tried Unix single usere mode Command S to type in fsck -y after the prompt localhost# (p840 - The Missing Manual series Leopard) but never got to this prompt. Upgraded to lastest iMovie and iDVD
    Tried your FINDER- PREFERENCES - TICKED THEM BUT THEY DON'T SHOW UP IN THE SIDEBAR. . Starting to look ominous. Here I am in the middle of the South Pacific with no Mac repair shop within 3000 km.
    OR any other suggestions - may be "life saving" or this iMac is going on a long flight soon or could you send your father-in law.

  • My 24" iMac won't read audio cds--ejects them after about 15 seconds

    My 24" intel iMac won't read audio cds. It ejects them after about 15 seconds. I have virtually never played cds on this machine in five years. It plays dads with no problem. Anybody have any feedback. I also saw a fix by deleting some presence files.

    I saw this on a forum from about four years ago:
    Trash the following folders:
    com.apple.kernelcaches (from System/Library/Caches
    extensions.kextcache (from System/Library
    CDInfo.cidb (from Home/Library/Preferences
    Restart
    Could this be a fix.
    Unfortunately, I can't reset PRAM. I've done it a thousand times over twenty years,but my machine simply boots up without the extra chimes.

  • IMac unable to read CDs

    My iMac won´t read music CDs. It tkes them in and make some noises until ejects them. They don´t even show up on the desktop. DVDs are OK.
    How can I sort this out?

    The drive may simply be broken. Separate lasers are used for CDs and DVDs, so the CD laser may be dead. Be sure to try commercially made audio CDs as well as home made ones if you have not already. Some people suggest a lens cleaning disc, which I have not tried, or a blast of canned air into the slot.
    A disc showing up on the desktop is a function of settings in System Preferences/CDs & DVDs, so this may not mean much.

  • IMAC won't read sandisk 8gb sdhc from canon hf m-31 hd camcorder

    IMAC won't read Sandisk 8GB SDHC card from Canon HF M-31 HD camcorder

    Your camcorder is fine with iMovie 09. My suggestions are two;
    1)Canons sometimes take a little bit of effort to connect. Try disconnecting and then reconnecting your camcorder. Try shutting down iMovie and then turning it back on. I have a Canon hf100 usb camera also and love it. I just put up with the odd frustration of it sometimes not recognizing the connection.
    2) Click on the camera icon in the main iMovie interface (middle, extreme left). See if your camera is "seen" my iMovie. If not, try disconnecting and reconnecting the camcorder.
    Hugh

  • Why my new iMac won't read my external hard drive?

    Why my new imac won't read my external hard drive??

    Liz,
    Sorry for not responding sooner, I support your position completely - as for the external drive I assumed that the individual was a previous mac user and knew about that (my mistake) at home I have a couple of external drives
    one drive is acknowledged regardless of format (mac/win) its a partitioned drive.... the other one - far as the mac is concerned does exist when i connect it.  I believe its a win only drive (will have to check the specs on it) but it works on the win-notebooks.
    so my point of reference was coming that perspective, with no additional posts I have to assume you had the correct answer.  have a great day.

  • IMac won't read startup disk

    Longstanding problem. Older iMac won't read the Leopard disk. I got around this by using my daughter's iBook in slave mode and then installing 10.5. Everything works but I can't start up with the disk to use disk utilities. It was suggested that I get a new ext dvd drive which I did. (Kanguru qs2)
    I started it up and installed Office for Mac without a problem. Then I tried to use the 10.5 disk and it would not read it. I had a hard time getting the disk to eject. After it did eject I tried using some other disks including Office and none of them work now. Any ideas?

    rafterdog wrote:
    I started it up and installed Office for Mac without a problem. Then I tried to use the 10.5 disk and it would not read it. I had a hard time getting the disk to eject. After it did eject I tried using some other disks including Office and none of them work now. Any ideas?
    Sounds like your new drive broke.

  • Eearly 2006 iMac Won't Read DVDs or CDs

    It seems suddenly my drive won't read DVDs or CDs. These are both blank or store bought. Everything I load one, it spins, tries to read and then just spits it out. I tried the preferences turn to "ignore" and that didn't work.
    Anyone know why my drive suddenly is being picky?
    So frustrating...thanks in advance!

    Hi Gully
    Just for the record what brand(s) are you using? I ask because even if they are the same brand you always use, it could be because there from a new of different batch.
    Two things you can try on the iMac are resetting the SMC and PRAM and see if that helps!
    http://support.apple.com/kb/HT1543
    http://support.apple.com/kb/HT1379
    I burn quite a few Photo & Music CD's using both Maxell and Fujifilm CD-R's, in the five packs they have always come thru. I don't burn a lot to DVD's, but I've never found a bad Memorex DVD-R in a five pack. I know lot's of folks will swear against Memorex, but in the last 2½ years I've never found a one that the SuperDrive in my Early Core Duo would not burn. Lastly I know it cost more to buy media in the five packs instead of 25 or 50+, but I've always done that just in-case they don't work.
    Dennis

  • New iMac - won't read Adobe 9 or 9_

    my new imac 27" OSX 10.6.2 won't read any PDF files. I get an error message saying "You can't open the appliation Adobe Reader because it is not supported on this type of Mac. i then went to the adobe web site and downloaded another version of Reader that i thought was compatible with my computer. i did not uninistall the original. now i have two versions in my applications folder, neither of them work. i was also told that to uninstall adobe is a serious matter and that if it's not done properly it could be a nightmare. it already is. Help!

    Trash all versions of Reader and install the one you want.

  • My iMac won't read my flash drive

    My iMac 27-inch, mid 2011, (OS X version 10.7.4) won't read my flash drives. I don't believe it is a formatting issue of the USB flash drive because the flash drives are easily read on my MacBook Air, 11-inch, late 2010 (OS X version 10.7.4). The drive occasionally will appear on the iMac, but not always, and I can't seem to figure out when it does and when it doesn't. When I use an external hard drive, it appears in the finder.  Just, not the flash drives.  So, I continually have to load from the flash drive to the Air and then connect to the iMac. It's kind of ridiculous. Does anyone have an idea why I can't read the flash drive on the iMac?

    Could be a USB port glitch/problem - try these two troubleshooting methods:
    PRAM reset:
    http://support.apple.com/kb/HT1379
    SMC reset:
    http://support.apple.com/kb/HT3964
    post back if it still doesn't work.

  • My Windows 8 HP Pavillion g4 Laptop won't read CDs and DVDs.

    My laptop won't read any DVDs or CDs. I really need it for my project. Someone please answer immediately, I really need it now =))

    Hello KaitoKid.  I understand your notebook is unable to read discs.
    Take a look at the suggestions offered in this document.
    Let me know if this helps.  I hope you have a great day!
    Please click the white star under my name to give me Kudos as a way to say "Thanks!"
    Click the "Accept as Solution" button if I resolve your issue.

  • DVD/CD Drive Problem: Works with DVDs, but won't Read CDs

    As the title states, my laptop's CD drive will not read CDs (it is a satellite A205 by the way).  The yellow light lights up, it makes noises as if it is trying to read the CD, but just doesn't do it.  It won't show up as a CD being there when I look it up on "computer".  On the other hand, when I put a DVD in, it works no problem.  Anyone have any idea of what I could do?  I've tried uninstalling the driver on device manager and restarting the computer, thus allowing it to reinstall it, and it didn't help.  Any and all help is greatly appreciated!

    Try cleaning out the drive with compressed air and/or a lens cleaning disk.  This often times helps. 
    Next try booting to a Linux Live CD or some other Self Booting CD like Memtest.  If it doesn't then you know for sure that the drive itself is defective as you are taking Windows out of the equation.  If it does, then you know it's a Windows problem which will more than likely require restoring the system to it's factory out of box state using the Recovery DIsks to fix.
    If the drive works with a Live CD then try going into device manager, uninstall the DVD drive, then reboot the system to have Windows automatically re-install it.  This sometimes helps as well.
    If you don't post your COMPLETE model number it's very difficult to assist you. Please try to post in complete sentences with punctuation, capitals, and correct spelling. Toshiba does NOT provide any direct support in these forums. All support is User to User in their spare time.

  • Combo drive won't read CDs or CD-Rs or CD-RWs

    my combo drive used to read CDs, CD-Rs and CD-RWs.
    now it can't read any media but DVDs.
    why is this so?
    please help. i have tried all brands of the CD medias but still it won't work. the drive keeps on spitting out the CDs.
    thanks.

    Hi.
    I had the same problem with a Combo drive in a PowerBook G4 12 inch model.
    It ended up being repaired under warranty.
    You could try several things to troubleshoot it:
    1. Zap PRAM
    2. Reinstall system software
    3. Check the drive using a utility application
    4. Check your System Prefs under CDs and DVDs.
    If these or other techniques do not solve the problem, then it is most likely a hardware issue, and your drive will need fixing. The Combo Driive in my "Little AL" went bad after nearly 3 years of use, but just prior to warranty expiration.
    Ted

  • A135-S4527 - DVD Drive won't read CDs but works with DVDs

    My Toshiba Satellite A135-S4527 is running Windows Vista Home Premium with SP1. It has a MAT**bleep**A DVD-RAM UJ-850S ATA Device DVD/CD-ROM drive (from System Information). It will not read CDs in the drive anymore. It doesn't give an error or anything. It just acts like nothing is in the drive. However, it does still read DVDs. Anyone have a fix for this?
    Thanks,
    Jason

    mdcitrus wrote:
    Same problem but reverse... reads CD's but no reaction to DVD.. Question I have a TEAC DW 224E-A drive currently. I was thinking I would upgrade to a TEAC 224E/S drive. I have a Toshiba A25-S207 laptop. TEAC responded that they didn't "know" if this would work or not... Need to get the drive and get it installed asap. Any help is appreciated.
    thanks!
    Tina
    You can find drives for your A25-S207 at http://www.sparepartswarehouse.com
    Many users have reported difficulties with generic replacement drives purchased on eBay.  These drives often lack the proper firmware required to operate in Toshiba notebooks.  I'd suggest buying an exact replacement from a vendor that handles Toshiba parts.

  • Imac won't read my burned 16x DVD-r's - but reads 8x just fine?!?!

    Hello.
    I have been burning CD's and DVD's on my imac PowerPC G5 *(Burner: Pioneer DVD-RW DVR K04F)* for 2 years now with absolutely no problems. Historically, I've used 8x dvd-r's from many different brands and I use Popcorn burning software. Now suddenly, all the electronic stores are carrying only 16x dvd-r's, so I bought some (Maxell), but I don't think my imac likes them. I can burn a movie onto the 16x blank dvd-r using Popcorn and the burning process works fine, process completes without problem, etc. If I put the burned 16x dvd-r disc into my stand alone DVD player on my TV, it will play with no problems, but when I put any of these burned 16x discs back into my imac, the imac will spin it for 10 seconds and then spit it out. However, my imac continues to read/play any of my 8x dvd-r's or commercial dvd's without any problem. Also, no problems with cd-rs.
    Anyone have any thoughts on what's happening here? I have cleaned the lens with one of those disc cleaners with the tiny brushes (I ran the cleaning process at least 10 times in a row just to make sure!). I also checked Pioneer's site and I see firmware updates for a handful of their dvd burners but nothing for the DVDR-K04 I have. I called Apple but sadly my AppleCare has expired, and their only advice was to run 'Software Update' but there's nothing in there regarding this issue. So I'm wondering if anyone here might have any suggestions or help?
    Thanks for reading!!
    BB

    It could depend on what format the content is that is not readable - if you have access to the Windows machine, you could check on the format (and/or know the format if you burned it)? Is it just .jpeg's? Or did you make a slideshow resulting in an mpg2 possibly? In that case, you'd need to buy the MPEG2 Playback Component from the Apple Store (less than $20) because Quicktime can't read that format without the playback component.
    Can the DVD be played in a regular DVD player?

Maybe you are looking for

  • UPGRADING AND MIXING MEMORY ON MY MAC PRO QUAD CORE DUAL 2.8 (Xeon)?

    Hello, I have a Mac Pro Quad Core Dual 2.8GHz (Xeons) with 4GB of memory (2 x 1GB Apple modules + 2 x 1GB other brand - Shown as "Manufacturer 0x855D") and now I want to fill the other 4 memory slots by adding an additional 16GB (4 x 4GB modules) for

  • In  RSA1 transaction, I written SELECT QUERY while compile It shows error

    Hi All,                While compile my SELECT query in RSA1 trans, ENDROUTINE, It show error...             Select single MAX( date )                      from dbtable                      into W_DATE                     where DOC_NUMBER = w_itab-DO

  • Oracle forms 10g R1 (9.0.4) to 10g R2 (10.1.2.0.2)

    Hello, We were using Dev suite 10G R1 (9.0.4) for a long time and now we have moved to 10G R2 in app server. I'm a developer and trying to get my forms 10g R2 working on my windows xp machine. 1. I'm able to open the forms which were opened last time

  • Qosmio X500-12L Latest Wireless drivers don't connect after sleep

    Latest Toshiba drivers don't REconnect to the router anymore after comming out of sleep state. I have to DISABLE the wireless adapter, re-enable it to get back into it. (has nothing to do with "let windows turn this adapter off to save power) in case

  • I have made a little drawing application in Director...

    I have made a little drawing application in Director, using trail and other effects on the stage.  I would like to know if there is a method (Xtra?) to export the stage and/or a cast member to a jpg or png (or other) using lingo to intitiate a Save o