IMAC won't read sandisk 8gb sdhc from canon hf m-31 hd camcorder

IMAC won't read Sandisk 8GB SDHC card from Canon HF M-31 HD camcorder

Your camcorder is fine with iMovie 09. My suggestions are two;
1)Canons sometimes take a little bit of effort to connect. Try disconnecting and then reconnecting your camcorder. Try shutting down iMovie and then turning it back on. I have a Canon hf100 usb camera also and love it. I just put up with the odd frustration of it sometimes not recognizing the connection.
2) Click on the camera icon in the main iMovie interface (middle, extreme left). See if your camera is "seen" my iMovie. If not, try disconnecting and reconnecting the camcorder.
Hugh

Similar Messages

My 24" iMac won't read audio cds--ejects them after about 15 seconds

My 24" intel iMac won't read audio cds. It ejects them after about 15 seconds. I have virtually never played cds on this machine in five years. It plays dads with no problem. Anybody have any feedback. I also saw a fix by deleting some presence files.

I saw this on a forum from about four years ago:
Trash the following folders:
com.apple.kernelcaches (from System/Library/Caches
extensions.kextcache (from System/Library
CDInfo.cidb (from Home/Library/Preferences
Restart
Could this be a fix.
Unfortunately, I can't reset PRAM. I've done it a thousand times over twenty years,but my machine simply boots up without the extra chimes.

Why my new iMac won't read my external hard drive?

Why my new imac won't read my external hard drive??

Liz,
Sorry for not responding sooner, I support your position completely - as for the external drive I assumed that the individual was a previous mac user and knew about that (my mistake) at home I have a couple of external drives
one drive is acknowledged regardless of format (mac/win) its a partitioned drive.... the other one - far as the mac is concerned does exist when i connect it. I believe its a win only drive (will have to check the specs on it) but it works on the win-notebooks.
so my point of reference was coming that perspective, with no additional posts I have to assume you had the correct answer. have a great day.

IMac won't read startup disk

Longstanding problem. Older iMac won't read the Leopard disk. I got around this by using my daughter's iBook in slave mode and then installing 10.5. Everything works but I can't start up with the disk to use disk utilities. It was suggested that I get a new ext dvd drive which I did. (Kanguru qs2)
I started it up and installed Office for Mac without a problem. Then I tried to use the 10.5 disk and it would not read it. I had a hard time getting the disk to eject. After it did eject I tried using some other disks including Office and none of them work now. Any ideas?

rafterdog wrote:
I started it up and installed Office for Mac without a problem. Then I tried to use the 10.5 disk and it would not read it. I had a hard time getting the disk to eject. After it did eject I tried using some other disks including Office and none of them work now. Any ideas?
Sounds like your new drive broke.

MacBook Pro won't read Sandisk SDHC cards since Lion 10.7.1 update

Hi all, just wondering if anyone else has had this problem. I know there are dozens of posts about SD cards not working with MacBook pros, but mine seems to have started when I installed the latest Lion update.
I have a high-end 13" early 2011 MBP and the cards I'm having trouble with are all Sandisk 4GB SDHC. Two are 'Extreme III's" and one is an Extreme II. The card reader is showing up in System Profiler, and a really old 2GB Sandisk card gets read fine, so there doesn't seem to be anything wrong with the MBP hardware.
Similarly, I can read the cards fine via a USB adapter, so it's not the cards that are causing the problem.
I had successfully imported photos from the cards before upgrading to Lion, and also before installing the 10.7.1 update. So, it looks like the problem may be linked with the update, but this is purely an educated guess.
I've tried resetting the SMC to no avail.
Has anyone else experienced something like this?

I've got the same problem. I've got a late 2010 MacBook Pro unibody running Mac OS 10.7.1 on it. I installed the 10.7.1 updated most likely on 8/17/11 the day after it was released by Apple. Since then I was able to read SDHC cards as I shot a number of photos and videos to my cards and they worked fine.
I'm not sure what has changed since then, it wasn't as simple as the 10.7.1 update then it didn't work. This is the problem I'm having below, just started to experience this on 9/2/11. I tested with two 32GB SDHC cards, one 16GB SDHC card and one 2GB SD card. All cards were manufactured by Transcend.
FAIL:
* SDHC cards (16GB and 32GB) will not mount and isn't recognized by the MBP via the built-in SD card slot
* SDHC cards (16GB and 32GB) will not mount and isn't recognized by the MBP via SanDisk 2.0 card reader connected via a short USB cable.
* If I put any SDHC card into a SanDisk USB 2.0 reader that is connected to my USB hub (I gave it a try in case there was a power problem with the MBP USB system) the card is not recognized either.
* Even Disk Utility will not see the card when inserted via built-in card slot or a reader.
SUCCESS:
* SD cards (2GB) mount fine when inserted either in the built-in SD card slot or via my SanDisk USB 2.0 reader.
* If I leave the SDHC card in my camera (Canon 60D) and connect the camera to my MBP via USB I can import the images via Aperture.
* If I put the SDHC card into the memory card slot reader of my HP inkjet printer (it has multiple card slots for different types) the card will mount normally like it is supposed to via the two failed methods above.
I'm also sending this info to Apple but wanted to post here since there are three inconvenient work-arounds.

Eearly 2006 iMac Won't Read DVDs or CDs

It seems suddenly my drive won't read DVDs or CDs. These are both blank or store bought. Everything I load one, it spins, tries to read and then just spits it out. I tried the preferences turn to "ignore" and that didn't work.
Anyone know why my drive suddenly is being picky?
So frustrating...thanks in advance!

Hi Gully
Just for the record what brand(s) are you using? I ask because even if they are the same brand you always use, it could be because there from a new of different batch.
Two things you can try on the iMac are resetting the SMC and PRAM and see if that helps!
http://support.apple.com/kb/HT1543
http://support.apple.com/kb/HT1379
I burn quite a few Photo & Music CD's using both Maxell and Fujifilm CD-R's, in the five packs they have always come thru. I don't burn a lot to DVD's, but I've never found a bad Memorex DVD-R in a five pack. I know lot's of folks will swear against Memorex, but in the last 2½ years I've never found a one that the SuperDrive in my Early Core Duo would not burn. Lastly I know it cost more to buy media in the five packs instead of 25 or 50+, but I've always done that just in-case they don't work.
Dennis

My iMac won't read my flash drive

My iMac 27-inch, mid 2011, (OS X version 10.7.4) won't read my flash drives. I don't believe it is a formatting issue of the USB flash drive because the flash drives are easily read on my MacBook Air, 11-inch, late 2010 (OS X version 10.7.4). The drive occasionally will appear on the iMac, but not always, and I can't seem to figure out when it does and when it doesn't. When I use an external hard drive, it appears in the finder. Just, not the flash drives. So, I continually have to load from the flash drive to the Air and then connect to the iMac. It's kind of ridiculous. Does anyone have an idea why I can't read the flash drive on the iMac?

Could be a USB port glitch/problem - try these two troubleshooting methods:
PRAM reset:
http://support.apple.com/kb/HT1379
SMC reset:
http://support.apple.com/kb/HT3964
post back if it still doesn't work.

Imac won't read Cds

5-yr. old iMac: suddenly won't read CDs. It spits them out after 10-20 seconds with no error message.

Thanks everybody
I too have suddenly developed this failure to burn. Worked well last week, now doesn't even get to the multiplexing stage, just ejects the blank disk. Ejects original Leopard disk, won't write to CD with Toast 8. Couldn't even check the hardware diagnostic as it just spits the disk out.
Tried Unix single usere mode Command S to type in fsck -y after the prompt localhost# (p840 - The Missing Manual series Leopard) but never got to this prompt. Upgraded to lastest iMovie and iDVD
Tried your FINDER- PREFERENCES - TICKED THEM BUT THEY DON'T SHOW UP IN THE SIDEBAR. . Starting to look ominous. Here I am in the middle of the South Pacific with no Mac repair shop within 3000 km.
OR any other suggestions - may be "life saving" or this iMac is going on a long flight soon or could you send your father-in law.

New iMac - won't read Adobe 9 or 9_

my new imac 27" OSX 10.6.2 won't read any PDF files. I get an error message saying "You can't open the appliation Adobe Reader because it is not supported on this type of Mac. i then went to the adobe web site and downloaded another version of Reader that i thought was compatible with my computer. i did not uninistall the original. now i have two versions in my applications folder, neither of them work. i was also told that to uninstall adobe is a serious matter and that if it's not done properly it could be a nightmare. it already is. Help!

Trash all versions of Reader and install the one you want.

Imac won't read my burned 16x DVD-r's - but reads 8x just fine?!?!

Hello.
I have been burning CD's and DVD's on my imac PowerPC G5 *(Burner: Pioneer DVD-RW DVR K04F)* for 2 years now with absolutely no problems. Historically, I've used 8x dvd-r's from many different brands and I use Popcorn burning software. Now suddenly, all the electronic stores are carrying only 16x dvd-r's, so I bought some (Maxell), but I don't think my imac likes them. I can burn a movie onto the 16x blank dvd-r using Popcorn and the burning process works fine, process completes without problem, etc. If I put the burned 16x dvd-r disc into my stand alone DVD player on my TV, it will play with no problems, but when I put any of these burned 16x discs back into my imac, the imac will spin it for 10 seconds and then spit it out. However, my imac continues to read/play any of my 8x dvd-r's or commercial dvd's without any problem. Also, no problems with cd-rs.
Anyone have any thoughts on what's happening here? I have cleaned the lens with one of those disc cleaners with the tiny brushes (I ran the cleaning process at least 10 times in a row just to make sure!). I also checked Pioneer's site and I see firmware updates for a handful of their dvd burners but nothing for the DVDR-K04 I have. I called Apple but sadly my AppleCare has expired, and their only advice was to run 'Software Update' but there's nothing in there regarding this issue. So I'm wondering if anyone here might have any suggestions or help?
Thanks for reading!!
BB

It could depend on what format the content is that is not readable - if you have access to the Windows machine, you could check on the format (and/or know the format if you burned it)? Is it just .jpeg's? Or did you make a slideshow resulting in an mpg2 possibly? In that case, you'd need to buy the MPEG2 Playback Component from the Apple Store (less than $20) because Quicktime can't read that format without the playback component.
Can the DVD be played in a regular DVD player?

Aperture 3.4.3 cannot read/process RAW images from Canon EOS M.

According to the information provided by Apple, Aperture 3.4.3 is capable of reading/processing RAW files from the Canon EOS M. I do not find that to be the case. I can see them in the preview when they download but as soon as I click on them I am met with the message that the files are in a format that Aperture does not recognize. ***** because I usually ONLY shoot RAW. Am I alone here?
Thoughts?

It sould work in Lion also according to this page from Apple. Are you sure you have the latest version of Aperture?
I would double check just to make sure you have the latest OS and Aperture.
What happens if you open the RAW file in Preview?
If you go to /System/Library/CoreServices you'll see the RawCamera.bundle file. Select it, right click on it and choose Get Info from the menu. The Info window will look like
You should have version 4.01

New Super Drive in iMac won't read DVD-R Data discs from windows machine.

Bought iMac 2.4 GHz 10/2007, the drive failed to burn DVD's about %70 of the time. Reading was very slow. Took to Apple Store in January, drive replaced. New drive burns and reads, except for TDK DVD-R data discs from my Sony Vaio (movies work). For these it gives alert "Blank DVD." When opened in finder it identifies media as a CD.
Someone had this problem earlier in the forum. No answer was posted. My Dell reads the dics fine. Stranger still, I hooked up an external LaCie 1394 DVD-R/RW+CD to the iMac to read the discs and got the same error. I hooked the same drive to my Dell and it read the same disc fine. Also, Dynex DVD+R and CD's work fine.
It does not seem to be a straight hardware issue. More like a device driver problem maybe?
Phone support suggested transferring all my data to DVD+R dics, but that is kind of a pain. Might upgrade to OS 10.5 help? Thanks

No suggestion but maybe some sharing of your misery. I bought a new 24" iMac 2.8 ghz on 2/24. Two hours after purchase, I put a DVD in the slot and nothing. Twenty five minutes with tech support, trying several different options to eject the disk, got me nowhere. They told me I would have to bring the machine in for repair. I did that, and magically, the DVD player is recognized when he (at the Apple store) boots the machine and it ejects the disk. He said the machine was fine. I said that it wasn't if I had to take the computer for a ride in my truck every time the optical drive doesn't work.
I'm waiting for a diagnostic to be run but I have my doubts about support in this area. I believe that Apple will say that they found nothing wrong and it's user error (not hardly, but it's probably easier than fixing the bug with the optical drives). This is my first ride with a Mac and I expected it to be wonderful. It's not a very smooth ride so far.

HT5287 new 27" iMac won't read DVD from older iMac

Have enabled on iMac with teh Optical Drive
Option to enable doesn't exist on new iMac
Unde Devices Remote shows as empty
What am I doing wrong?
Thanks
Ian

thanks for your responses and sorry for not asking my question clearly
I know there's no optical drive. I am trying to install Mac 2011 onto my new iMac from my old iMac which has the optical drive.
However the old iMac doesn't show up under Remote in Finder, even though I have enabled CD / DVD sharing
Thanks again

MacBook Pro suddenly won't read SanDisk 8G memory card, nor Canon T2i USB connection.

Suggestions?
I've plugged the memory card into the slot several times not even a week ago and it worked just fine...now it won't.
I have tried plugging the camera in via the USB hook up and nothing happens but yet it works fine on other computers I've used.

I just received the following helpful URL link from SanDisk tech support.
http://kb.sandisk.com/app/answers/detail/a_id/60
SanDisk responded within 5 hours of my inquiry. After removing all USB devices from my iMac and reinserting the card reader alone, the reader started working again. I ejected it numerous times from USB ports on the iMac as well as from a USB hub. After plugging my other USB devices back in, I have not detected if there was a device which was causing the conflict. As a precaution I have removed USB devices that are only used periodically such as a Colorvision Spyder2Express device used every 30 days or so to color correct my monitor.
Hope this helps others with Mac card reader issues.

My iMac won't read my Canon Rebel XT

I've had my iMac for a couple months now and have never been able to get my Canon Rebel XT to show up on it. I plug it in via usb and turn it on and it just reads "busy" on the screen continuously, and doesn't show up anywhere on my iMac. I tried Googling an answer to my question multiple times but all solutions assume that the camera shows up on my iMac, which it does not.
If this is the wrong place to post this question please direct me as to where it would be appropriate. Thank you in advance for any help, I really appreciate it.

I won't show up in the Finder, but should still import into iPhoto. Optionally, you can take the card out and insert it into any SD card reader that registers with your Mac. Then you'll see the card in the Finder listed as a Canon EOS (if properly formatted with your camera's Initialization routine) You should be able access the USB SD card like any other drive or USB device.
While in the camera, though, I believe you will only get iPhoto to import from it.

IMAC won't read sandisk 8gb sdhc from canon hf m-31 hd camcorder

Similar Messages

Maybe you are looking for