IMac won't reboot after system restore from Time Machine

I just installed a wacom intuos pro tablet on my imac running snow leopard. The system clock reset to 1st Jan2000 and system prefenerces were no longer accesible. I performed a system restore from my time machine but now can't reboot. The restore completed succesfully (or so the it told me). When i restarted the imac i got the usual 'bing' followed by grey screen and spinning wheel swiftly followed by a light blue screen with the cursor in the top left hand corner.
There is sat for an hour befoe I switched off and tried again......same result.
The installation disc is still in the optical drive.
Any advice please on how to remidy this?
Thanks

I have/had a similiar problem. What I did was reset the SMC and PRAM. You can also do a safe boot. For the PRAM, I had to do three times, and my computer finally booted up. Afterwards I verified my disk and repaired my permissions. So far so good. I guessing that Spotlight needed to re-index the system.
http://support.apple.com/kb/ts2570

Similar Messages

Downloads folder missing after system restore from Time Machine

I installed a new HDD, installed Leopard, and the did a system restore from Time Machine. Everything seems to work fine except from a big question mark in the dock, where downloads folder should be. Any suggestions pls?

Thank you very much for your quick answers.
Probably the problem originated from excluding the Downloads folder from my backup, although it should have been there in my new installation. The interesting thing was that this folder were nowhere to be found in the Finder, and by trying to download something from Safari, it just wouldn’t.
I did a Repair Permissions from the HDD, not the Leopard DVD, and all came back to normal.
I have to admit, that coming from The Win world, this HDD replacement was the easiest and fastest ever, by far!

Will a system restore from Time Machine erase any of the data that is currently on the Mac and not in the Time Machine?

We had a lot of data on our Mac (i.e. photos, iTunes libraries etc) which we backed up via Time Machine. The hard disk corrupted so we had to get it wiped. When we got it back, my parents started using the mac as per usual but they didn't do a full System Restore from Time Machine. So, if I do a full restore now, will it erase any of the new photos, musc etc that is currently on the mac?

The Time Machine restore will only restore what is on Time Machine. Making a clone is probably a better means of ensuring whatever data you want recovered gets recovered together with Time Machine.
Generally speaking, applications that are newer than the operating system from Apple that are included with the operating system are not supported. So in your data recovery process from your clone, you'll have to be careful what data you choose to copy back.

During upgrade to Lion on Macbook Pro the upgrade stops at OS utilites after rebooting asking to restore from time machine backup or install new copy

My Daughter is currently upgrading her MacBook Pro to OS X Lion. During the upgrade the system rebooted and then stops at the OS X Utilites menu. I have installed this same upgrade on My MacBook Pro and the family iMAC without issue. Did the upgrade encounter a problem? The only options are to Restore from Time Machine Backup, Reinstall Mac OS X, Get help, or Disk Utility.
I'm not sure how recient the backup is on the TimeMachine for her system and she is concered that she may loose a lot of updates she has made to iTunes and iPhoto.
Please help.

I have 8 GB of RAM, but would that even matter during install? Performance once installed and running sure, but I questiong whether the installer would demand that much more, or why it would affect mountain lion when restoring from a time machine backup.

System Restore from Time Machine Back up and Mail

Hi
I have around 16,000 Messages in my Mail 3.2 Inbox. I use Gmail IMAP service. One thing I like about Mail is that next to all my messages there are these arrows that indicate whether I have replied to or forwarded a particular message and clicking on them takes me to my response to a particular email.
I need to reformat my MBP HD and want to do a system restore through Time Machine.
My question is, will Mail return to my current state (with all the arrows and tags) after I do the complete restore from Time Machine.
Any help on this is highly appreciated.
Cheers!

Mheck21 wrote:
I replaced the internal because I need more space, I'm not an expert, but I've done it before. I wasn't having trouble I was just running out of room and decided to upgrade?
Ah, ok, that rules that out.
I think it wasn't backing up because it was showing I had files on the external but I couldn't locate them. It's my understanding that the external must be blank to back your computer up with time machine.
No, it doesn't have to be empty (although Time Machine works best if it has its own, exclusive space). Without the error message(s), we don't know what is/was wrong.
I have run the Verify Disk on the internal and it says its all good.
Ah, good. That means you don't have directory problems.
I have not run a Repair Disk Permissions. I am not sure how to do that? Is that also located in the Disk Utility.
Yup, same window, different button.
I tried to just run the update from the update software option in the apple on the top left. I also then ran the combo that I downloaded from the apple site.
With what results? Did they compete? If not, what message did you get?

After a restore from Time Machine my login password does not work.

My HD crashed and I replaced the HD. I then restored from Time Machine. After it was done restoring it prompted me for my apple ID and password and account info. Now when I try to login, the password does not work. After several failed passwords, it says I can reset my password using my apple ID. How do you do this? I click on the message and it just disappears. I can't login!

Is it your actual Apple ID login password that you're talking about (which is obviously working since you got into this forum) or the password for your user account. If the latter, simply boot to your ML Recovery partition (holding down the Command and R keys while booting) and set a new password via Terminal.
Boot into your Recovery partition and, from the Utilities menu, open Terminal. In Terminal, type in:
resetpassword
...a small app will run allowing you to select a user and change the password for that use. Enter the new password twice (the second time to verify) and give yourself a password 'hint'. Then reboot and use your new password on your account.
Clinton

Quirks and problems after a restore from Time Machine

I had need to restore from Time Machine. It did the job, but it wasn't as easy as restoring from SuperDuper. Apple iTunes Store passwords and iTunes registrations were all lost, requiring me to re-enter passwords for the various users' authorizations to play music (and burning a user on each of those accounts.)
As I used the restored system, there were several things that weren't quite right and had to be fixed as I encountered them. One persistent issue is that Safari cookies aren't working. For all the sites that had cookies to recognize me and log me in, the cookies no longer work. I have to log into the sites on each visit now. It will remember nothing.
Is there a general purpose restore tonic that will fix all these quirks?
I'm thinking of going back to SuperDuper and just set it up back up to a different volume each night for a week to have a full week's worth and skip this Time Machine mess.

In Safari, some of that password stuff is indeed handled by cookies from the various sites, but a lot of it is actually handled by the "autofill" function which fills in form fields (in this case name and password) with whatever you last used there -- independent of any cookies.
While running Safari, go to Safari / Preferences... Go to Security. Be sure that you are allowing cookies to be received in the first place.
Then go to Autofill. See if you have the item checked to allow recording and automatic filling of "User names and passwords". You can edit the list of them to see what's currently in there.
If this doesn't do it for you, you might want to try selecting Safari / Reset Safari... from the menu bar. The panel will allow you to select which data items to reset.

Mozilla apps won't load after System Restore from TM

Alas, a hard disk failure which Apple kindly replaced even though It happened 25 days out of 3-year AppleCare. Thanks!
New hard disk installed, proceeded to do System restore from TimeMachine and everything went perfectly (as far as I can tell) EXCEPT Firefox and Thunderbird. All the other apps are loading and seem to be working as I would expect (I guess I won't know for sure until I've worked for a few days) but Firefox will not load - the icon bounces in the dock for a couple of seconds and then disappears. Out of curiosity, I tired to load Thunderbird (which I seldom use) and not even the icon appears.
I am using OS-X 10.5.7 with Firefox 3.0.11
I have tried deleting the apps and the associated files in Library?Application Support and doing a re-install from a fresh download - same result. I tired restoring the apps from TimeMachine using a restore date one day before the HardDisk failure. Same result. I have used MacTuneUp to repair permission. Same result.
Any ideas why this is happening? I am most surprised that a fresh install didn't help. And it's interesting that two Mozilla apps are affected. I can live without Thunderbird but Firefox is important as there are some websites that still refuse to open with Safari.

[email protected] wrote:
OK - that was a good suggestion. Firefox and Thunderbird both work when I log is as a guest. Now what should I be looking for on my main account that is blocking the apps from opening? Thanks for the help.
probably something in their preferences. the most radical thing would be to delete the whole folders /users/usernmae/library/application support/firefox and /users/username/library/thunderbird. or just move those folders to the desktop. then try starting firefox and thunderbird. however, that will wipe all user info in both apps.

After full restore from Time machine, my TM hard drive won;t mount

I got my macbook pro back from a logic board repair and restored it fully from Time Machine using my leopard install disc.
Took a while, but it has installed OK. But some applications weren't restored and now the Time Machine drive won't mount on the Macbook at all. When I open up time machine - and try to choose a backup disc nothing comes up.
The drive shows up on a PC when i connect it (but won;t read it as its mac formatted) so I'm pretty sure there;s nothing wrong with the drive.

Also, be aware that TM thinks you got a new Mac, not a new logic board. Thus you won't see your TM backups in the normal way. You'll need the (badly named) +*Browse Other Time Machine Disks+* option (see #E2 in the Time Machine - Troubleshooting *User Tip* at the top of this forum).
In addition, when you start doing new backups, TM will start a whole new "sequence," as if it were a different Mac. See #C8 in the Troubleshooting Tip for options.

Full backup system restore from time machine

Help: I need to rebuild my system from Time Machine.
I am using iMac with 10.6.8. I plan to replace my HDD.
When trying to emulate the system restoration, I used the MAC Install DVD, which allowed accessing the Time Machine external disk.
However, TM suggested only one full backup dated 3/2011......
Can't time machine use all incremental steps between 2011 and today? 3 years......
What should I do before changing my HDD? Any way to force TM to accept a full backup NOW?
And then, will Restore rebuild my system as I see it today?
Thanks,
Moshe

The only one I've ever used is SuperDuper. It and Carbon Copy Cloner have free trail periods so you can experiment. I'm not familiar with the others.
Clone - Carbon Copy Cloner (Often recommended as it has more features than some others)
Clone – Data Backup
Clone – Deja Vu
Clone - SuperDuper
Clone - Synk
Clone Software – 6 Applications Tested

IPhoto will not open my library after I restored from Time Machine

I was successfully able to restore most if not all of my data from Time Machine after I had to get a new hard drive on my iMac. But iPhoto will not open my photo library. A window pops up that says I modified some of my photos using a newer version of iPhoto, so I must open that version. But I do not have a newer version than iPhoto 7.1.5.
I have iPhoto 8.2 on my laptop, but how could I have modified any of the same photos on that? The iMac library is not on the laptop.
I would appreciate any input on how to recover my photo library.

You can get this message if the database file is corrupted.
Try these in order - from best option on down...
1. Do you have an up-to-date back up? If so, try copy the library6.iphoto file from the back up to the iPhoto Library (Right Click -> Show Package Contents) allowing it to overwrite the damaged file.
2. Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
3. If neither of these work then you'll need to create and populate a new library.
To create and populate a new *iPhoto 08* library:
Note this will give you a working library with the same Events and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
In the iPhoto Preferences -> Events Uncheck the box at 'Imported Items from the Finder'
Move the iPhoto Library to the desktop
Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
Go into the iPhoto Library (Right Click -> Show Package Contents) on your desktop and find the Originals folder. From the Originals folder drag the individual Event Folders to the iPhoto Window and it will recreate them in the new library.
When you're sure all is well you can delete the iPhoto Library on your desktop.
In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.
Regards
TD

After Full Restore from Time Machine..

Hello All!
I've searched around but can't find the solution.. Unfortunately there was a terrible accident with my last Macbook Pro so I purchased a new one... I did a full install using Migration Assistant to replace my User account from Time Machine. I never got the option to 'use time machine history' and now aren't sure whether it's 'building' on top of my old Time Machine or just starting a new one. When I go into preferences it says 'oldest Back Up - None' & 'Latest Back Up - None'
Does any of this matter as the Old back ups are still there - the External Harddrive says 127 of 250Gb used... Or do I need to 'merge' these backups?
Many thanks.

I think that you should be fine. If you open Time Machine you should be able to determine the status and it should work as designed.
I have never encountered the"Inherit Backup History" that you mention. It probably is a Lion feature (I still use Snow Leopard) and I have never used Time Machine to transfer data to a new MBP or a restore. I prefer to select what I want to retain and let the rest go by the wayside. This way any 'trash' I may have does not get copied to the new MBP. Consequently when I connect the Time Machine HHD, it then does an entirely complete new update.
Keep the Pondini web site in mind. It has a plethora of useful Time Machine information.
Ciao.

Flash won't open (unexpected quit) after system reinstall from Time Machine

After purchasing a new machine, I reinstalled everything from my Time Machine backup, including all applications. Now Flash CS4 gives me "unexpected quits" every time I try to open it. Flash CS3 opens though. I deleted the prefs file and it still won't open.

I have/had a similiar problem. What I did was reset the SMC and PRAM. You can also do a safe boot. For the PRAM, I had to do three times, and my computer finally booted up. Afterwards I verified my disk and repaired my permissions. So far so good. I guessing that Spotlight needed to re-index the system.
http://support.apple.com/kb/ts2570

After System restore from Time Capsule Mail doesent work

HI
i resored my Time capsule backup on my mac because of the need for space to install windows on my mac (Boot camp doesent works!) i can use all my programms and data well exept Mail when i start mail it Flashes:
You can’t use this version of Mail with this version of Mac OS X
You have Mail version 4.0 (1075/1076). It can’t be used on Mac OS X Version 10.6.1 (Build 10B504). For more information, click the Help button.
(help button is online help....)
But its just a 1to1 backup.....
Can anyone help me??

Blinkyrus wrote:
i restored my Time capsule backup on my mac because of the need for space to install windows on my mac (Boot camp doesent works!) i can use all my programms and data well exept Mail when i start mail it Flashes:
You can’t use this version of Mail with this version of Mac OS X
You have Mail version 4.0 (1075/1076). It can’t be used on Mac OS X Version 10.6.1 (Build 10B504). For more information, click the Help button.
(help button is online help....)
The first thing I'd try is to download and install the Mac OS X 10.6.1 updater:
http://support.apple.com/kb/DL930
It would have been more appropriate to post your message in one of the Mac OS X 10.6 message sections.

How can one do a full system restore from Time Machine to a Macbook Air

I recently had a major crash on my two internal disc DualG5. The system internal disk failed completely and I used Time Machine to do a full system restore to the second internal disc. It worked PERFECTLY!! I followed the instructions in support
http://docs.info.apple.com/article.html?path=Mac/10.5/en/15638.html
This involved inserting the Leopard DVD into the optical drive and backing up from my external LaCie time machine backup.
I also have a MacBook Air. I use an external USB HD drive as Time Machine backup. The Air only has one USB port. I have an external DVD drive for the Air. Clearly, I will not be able to mount the DVD and External disk at the same time unless I use a small hub. I guess this will work but is there any other work around. Could I do a full reinstall and then connect the external HD?

Richard,
Alternatively, you could use Remote Disc Sharing (via the DualG5) to do the install and reserve the USB port for the Time Machine disk.
[http://support.apple.com/kb/HT1131]
[http://support.apple.com/kb/HT1777]
Let us know if this was helpful.
Cheers!

IMac won't reboot after system restore from Time Machine

Similar Messages

Maybe you are looking for