IMac Won't Recognize Airport Extreme

I purchased an Airport Extreme from the local Apple store and set it up according to directions, but my iMac doesn't see it.
I believe that there is a problem with my Airport card inside my Mac.
What I have tried to fix this:
First thing I did was get the latest version of Airport Utility. (I now have 5.5.2)
Next I plugged the ethernet cable directly from my Airport Extreme into my iMac.
Airport Utility immediately recognized the base station and I was able to configure it with a device ID and password.
After plugging the base station back into my DSL router, Airport Utility still couldn't find it. (The Extreme is about two feet from the computer with a clear line of sight.)
Both my iPad and iPhone "see" the Airport Extreme and are accessing the internet perfectly using it.
My next attempt to fix things was to reload OS X into my iMac. This and the updates took a couple of hours, but I got the same results.
I'm pretty sure there is an actual WiFi card in my computer. This is what my System Profiler says under Airport:
Software Versions:
Menu Extra: 6.2.1 (621.1)
configd plug-in: 6.2.3 (623.2)
System Profiler: 6.0 (600.9)
Network Preference: 6.2.1 (621.1)
AirPort Utility: 5.5.2 (552.11)
IO80211 Family: 3.1.2 (312)
Interfaces:
en1:
Card Type: AirPort Extreme (0x168C, 0x8F)
Firmware Version: Atheros 9280: 2.1.14.5
Locale: FCC
Country Code:
Supported PHY Modes: 802.11 a/b/g/n
Supported Channels: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165
Wake On Wireless: Supported
Status: Network Service Inactive
I'm thinking it's either a faulty card, or a disconnected antenna.
I'm stumped, and I guess I'll just have to take the computer to the Apple Store and have them ship it off to be opened up.
Thanks in advance for any suggestions.

JacoColtrane wrote:
Next I plugged the ethernet cable directly from my Airport Extreme into my iMac.
Airport Utility immediately recognized the base station and I was able to configure it with a device ID and password.
After plugging the base station back into my DSL router, Airport Utility still couldn't find it.
In the future if you have to use an Ethernet cable to configure your AirPort Extreme, it would be better to use a second cable to connect your Mac to one of the Extreme's LAN ports. Then the configuration could be completed using the final connections.
It might help to reset the connection settings on your Mac using these steps one at a time until it works again:
1) Use the AirPort menu bar item to turn AirPort off, then on again.
2) Try to select your Wi-Fi network from the AirPort menu.
3) In the Network panel of System Preferences delete the AirPort item from the left column, then add it back.
4) In the same panel as (2), define a new location and see if you can make that work.
5) In the same panel, select the AirPort connection item, click the "Advanced" button, select the "TCP/IP" tab, then click "Renew DHCP Lease".
6) In the folder /Library/Preferences ( not <yourhomefolder>/Library/Preferences), move the folder SystemConfiguration onto the Desktop, then restart your computer. See if you can now make your AirPort connection work.
They may not help, but they'll only take a couple of minutes to try.

Similar Messages

Computer won't recognize Airport Extreme Card

Okay, I need a little help. I bought an Airport Extreme card for my eMac today, which is what my manual told me I'd need to connect to a wireless Internet connection.
I followed the instructions to install it exactly, but the computer won't recognize that it's there. It still says "no information available" when I go look at the Airport card settings.
I'm not sure if it's a fault of mine, the card's, or the computer's. When I insert the card, should it snap into place? Should it slide out easily? How can I tell if it's in properly?
If anybody can help out, it'd make my year. I am dying to get this high-speed Internet set up. Thanks.

surfingbaku, Welcome to the discussion area!
Use the information in KB 86325, eMac: How to locate the serial number and identify your model to identify which type of eMac you have.
If you have one of these eMacs
eMac (ATI Graphics)
eMac (USB 2.0)
eMac (2005)
you require the AirPort Extreme card.
Any other eMac requires the original AirPort card.
If you are using the correct card and it is not being recognized, one or more of the following must be correct.
The card isn't installed correctly.
The card is defective.
The eMac's motherboard is defective and not recognizing the card.

IMac won't detect airport extreme card

i just bought an airport extreme card for my 1.25 GHz G4 iMac. i have installed the card in my computer, but for some reason my computer hasn't detected the card.
i read some suggestions in other discussions, and have tried almost everything. i have reset my PRAM and run the apple hardware test. the card still has not been detected. i have also installed the latest software update for airport. still nothing. someone also suggested resetting the PMU, but i read up on that and don't see how that would help with an airport extreme card.
i'm wondering if maybe i didn't do a good job of installing the card. it seems easy enough, but after i inserted the card and attached the antennae, the card felt sort of loose in the slot. i don't know if it's supposed to be a tight fit or not. i pushed the card in until it go any father, but i didn't want to push it too hard for fear of breaking something.
any suggestions?
thanks.
iMac G4 1.25 GHz Mac OS X (10.4.6)
iMac G4 Mac OS X (10.4.6)

i figured it out. my card wasn't pushed in all the way. DOH!

Mac Mini won't recognize Airport Extreme

I just purchased an airport extreme and am trying to hook up my mac mini via an ethernet cable to the airport extreme (plan to add a new macbook w/ wireless). Would like to share a dial-up connection between the mini and the yet to be purchased macbook (I know dial up is lame but I can't yet get DSL in my area). I plugged an ethernet cable from my mac mini into the <--> on the airport extreme and run the AIRPORT SETUP ASSISTANT. The assistant recognizes that I do not have a aiport card installed in my mini and says "you will only be able to configure the aiport base stations using ethernet". I think this is okay since I am hooking up the mini via an ethernet cable. When I continue the ASSISTANT says "No new airport networks were found". Am I able to hook up my mini this way? Any help would be very appreciated. I talked to APPLE technical phone support and they suggested that I take my mini and new extreme into an apple store to be looked at???
Thanks !!

Thanks !! Using your answer I determined that my ethernet port was not enabled. I was able to see the AP and configure it. Unfortunately, although I was able to connect to AOL via the AP built in modem I can not launch any web sites via the safari browser or the built in AOL browser. Was on the phone with AOL for an hour and they basically threw in the towel because I was able to connect to AOL. I went to the Apple store in Tucson AZ. and was very dissappointed with the "genius" bar. The first guy looked really confused when I explained the problem and said I should proabably wait for another "apple genius" (he did hook up my mac mini though - and ran some disk checks which seemed like a waste of time). The other "mac genius" came over and I kid you not said "well - good luck". He did not even attempt to help me. I was absolutely floored. He walked away with another customer. I started to pack my stuff up and walk out of the store when a young kid (another "mac genius" came over and asked if he could help). He explained that there are known issues with the airport express and AOL (even though APPLE advertises AOL compatibility). He suggested that I update the firmware - even though the unit is brand new.
So here I am. Trying to use the APPLE products that everyone seems to rave about. The technical support at the APPLE store was extremely poor. I migrated from WINTEL machines to my first mac (the mini) and this is not what I expected to encounter.
Thanks for your help. At least half of my problem was solved.

Power Mac G4 won't recognize Airport Extreme

I have a Power Mac G4 with Airport Extreme installed correctly (I looked at the official Apple Guide to installing it) and it doesn't show up. I have Airport Driver Software version 3.3 Installed. I don't know how to fix this..
Cheers,
Adam

What model Airport Extreme are you talking about??
The wireless card in the G4 is probably too old to support WPA2 security.. might even be too old to support WPA security.
So you should try using no security at all and see if that works.. if so and WPA does not work.. then the wireless is simply too old.. it needs WEP security but the WEP code is now wide open and it is trivial for people to hack so forget about it.
If you want to connect a G4 to a modern wireless network.. use a wireless bridge to ethernet.. and plug the G4 via cabled connection only.

I changed batteries in my Apple track pad and now my iMac won't recognize the UBS keyboard

I changed batteries in my Apple track pad and now my iMac won't recognize the USB keyboard

Please read and use Bluetooth: How to set up your Apple Wireless Mouse or Magic Trackpad

IMac won't recognize midi device

IMac won't recognize midi device (Roland Fantom) which is connected via USB only; no midi interface. I have rebooted both the Roland and the iMac, still no go. I have manually added the midi device under Audio Midi setup, still none of my apps will recognize the device; Logic Pro, ProTools and Sibelius. How do I get this configured? I've read through some other posts and nothing has worked.

Its standard for all computers - if you have 3rd party things that do not work - contact that company - they may have a driver for you to download specific for mac.
Some 3rd party things are windows only - probably same for Mac.

I'm trying to burn photos onto a CD from Finder, but my iMac won't recognize either a CD-R or a DVD-R.

I'm trying to burn photos onto a CD from Finder, but my iMac won't recognize either a CD-R or a DVD-R. Any clues? Nothing shows up in Finder as far as a Device, and I have a message telling me to "Insert a blank disc to begin" and that I will need a disc with at least "47.6 MB"--it's only 18 photos, and I need to burn them for a parent of a student (I'm a teacher). I have tried several different discs, so it's not the actual CD or DVD.

Create a new folder. Place the photos in that.
From the Finder File menu choose New Burn Folder. That will appear on your desktop. Place the folder of photos you created into that.
Now open Disk Utility and you will see that Burn Folder listed. Choose Burn from the menu.

IMac won't recognize DVD/CD drive anymore

As the title suggests, my iMac won't recognize my dvd drive anymore.
I don't know what the reason is for it.
I've never had this problem before, it happened a couple weeks ago.
I first noticed this when I tried burning a CD in iTunes.
It said at the top of the screen "Disc burner or software not found..."
I then went to System Profiler and checked "Disc Burning" and it
read, "No burning device was found. If you are using an external device please make sure that it is connected and powered properly." I'm not using an external device. I'm using the DVD drive that originally came with my iMac.
If anyone could please help me out with this I'd be very grateful.

Lately, I left my iMac on while I was sleeping. Couple nights ago, the optical drive made a funny noise and woke me up. It sounds very similar to opening up Disk Utility on my MacBook Pro, it looked for the internal optical drive. First, I didn't do further investigation on my iMac.
Yesterday, I happened to do some 'housecleaning' and attempted to slide in a data CD. The drive didn't response, so the CD was stuck. In the past, I had opened up numerous iMacs and they were getting more complicated model by model. I am certified to perform the repair, but since this iMac is covered under AppleCare, I decided to make an appointment with the MacGenius.
I did perform a PRAM reset earlier.
Do you have 'put the hard disk(s) to sleep when possible' checked under Energy Saver?
Out of all the Macs with slot-load optical drives built-in I have owned, this is the first malfunctioning I have ever had.

Intel iMac won't recognize external display with Dynex mini-DVI adapter

I've got an original Intel iMac with a Mini-DVI connection on the back. I'm attempting to hook it up to an external display (a plasma screen, in fact). I picked up a Dynex Mini DVI to Video Adapter DX-AP100 for Apple. This connector has a mini-DVI connector on one end, and both a video-out and an S-video-out on the other.
When attempting to use the adapter, the iMac does not recognize that there is an external display connected. Here are the facts:
The external display: I've tried this with a Panasonic Plasma screen connected directly through S-video, as well as a Pioneer receiver (one that switches video) connected both through s-video and composite video. And yes, I've got the settings on the TV correct. I've also tried this with a Polaroid LCD TV connected via S-video and composite video.
I did notice that when I click "Detect Displays" while the Plasma was connected, the plasma briefly "flashed", implying SOMETHING was happening, but still no dice.
Anyone have any experience with this Dynex DX-AP100 that could share some wisdom?
OS: v10.5.6
System Profiler:
ATI Radeon X1600:
Chipset Model: ATY,RadeonX1600
Type: Display
Bus: PCIe
PCIe Lane Width: x16
VRAM (Total): 128 MB
Vendor: ATI (0x1002)
Device ID: 0x71c5
Revision ID: 0x0000
EFI Driver Version: 01.00.068
Displays:
iMac:
Resolution: 1440 x 900
Depth: 32-bit Color
Core Image: Hardware Accelerated
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Built-In: Yes
Display Connector:
Status: No display connected

Yeah, I realize S-video is limiting, but I'm trying to keep things as simple as possible. The TV is mounted to the wall and there are not currently any DVI or HDMI cables coming out of it. There's an S-video input from my receiver that I'd prefer to use since it's readily accessible already. In the end my goal is to use Netflix "Watch Now" on the TV, so I'm not too worried about video quality.
and before someone asks if I considered that the receiver's S-video input might be the problem...I tried taking the s-video wire from the stereo and plugging it directly into the adapter. No dice.
ONE ADDITIONAL PIECE of information...while trying to get this to work on an LCD monitor, I plugged the composite video connection from the TV into the adapter. Suddenly the Mac recognized an additional monitor, but it saw it as a VGA monitor, not as s-video or composite video, and no signal went to the TV.
I'm considering trading in this adapter for a mini-DVI to VGA adapter, but that really won't help me with the connection to the TV.

Windows 7 Does Not Recognize Airport Extreme Base Station

I have a Macbook Pro, a Windows XP PC, an Airport Extreme and an HP Printer hooked up via USB to the Airport. My XP system and My Macbook work fine. I have Windows 7 installed via bootcamp on the MacBok. It connects to the wireless network perfectly on the Windows 7 side but when I run the Airport Utility it is "unable to find any apple wireless devices." I want to set up the Windows 7 side to print and need to discover this network printer but since it won't even recognize the Airport device, I don't know how to proceed. Anyone know how to solve this problem? I have uninstalled and reinstalled software to no avail.
Thanks,
Thad

I have the exact same issue with a new airport extreme. One additional bit of info for me is that the windows computer does see the wireless network and is able to get online. It just doesn't find the airport in the airport utility app. Also, according to the guidebook I am supposed to install "Bonjour" on Windows computers. Can't find any reference to Bonjour on the installation disc that came with the Airport Extreme.

Brand new 20" iMac won't recognize Ethernet cable - can't get online

I just got my iMac and cannot get the ethernet cable to recgonize. I know it works b/c I'm using it this very moment to type this on my Powerbook. When I plug it into the PB, I get the yellow,then the green once it connects. However, when I plug it into the iMac, I get nothing. I thought maybe I needed to configure Built-In Ethernet, but it won't let me select configure or connect. The assistant won't recognize it either. I posted in the Tiger forum mistakenly, but thought this forum would be more appropriate. This is what I posted (for more detail):
I just unboxed my new iMac and can't get on the internet (I'm on my powerbook). The problem is this; in Network, it says "The cable for Built-In Ethernet is not plugged in." Only, it is. Can't be the cable b/c that's the cable I'm connected with right now. So, I go through "assist me" and when I click on "Assistant" it takes me to the Intro page where I'm supposed to give a Location Name. I do this, calling it "home." The ver next screen, after clicking "continue" takes me to "How do you connect to the internet?" The problem here is that, of the 5 options, only one is selectable. Airport is the only one that can be selected?? "I use a telephone modem to dial my ISP" as well as "DSL Modem/Cable/Lan" are all greyed out..they cannot be selected. I use an ethernet cable. Why is this not able to be selected? It's very frustrating. I've turned off Airport and Bluetooth, yet I still cannot check any of these. I need to check "I use a cable modem to dial my ISP" but I can't b/c it won't allow me. Can anyone help me here? I can't use my brand new iMac and it's kind of a bummer. I thought these things were plug and play? Thank

Well I tried that and nothing. I'm completely stumped. I have no idea why this is happening. And it's weird b/c, everytime I'm jumping back on here, I'm just unhooking the ethernet cable from the iMac and plugging it into my PB. And, nearly immediately, i'm up and running, connected with the PB. How can it work on the PB and not on the iMac? And why would those options be grayed out on the iMac? It's like it just refuses to let me check them and/or configure. That is very weird.

Weird lost access to iMac's desktop via Airport Extreme wireless LAN

This is weird and complicated. I'll try to keep it simple.
1. Two computers on a wireless LAN via Airport Extreme: G4 Powerbook and 20" G5 iMac. The LAN has worked flawlessly and seamlessly for several years, and except for this ONE anomaly, still does.
2. When logged-in to the iMac from the Powerbook, all its files and contents show up normally in it's networked-drive window in Finder,
3. EXCEPT the desktop. And I mean the real desktop which is under my ID under USERS.
4. Searching the Powerbook from the iMac, however, works just fine and shows all of the Powerbook's contents.
Repairs of Permissions on both computers have accomplished nothing.
There is one other peculiar symptom: there was a .wmv movie file sent me by a friend, and I had a copy of it on the desktops of both computers. It sat there, showed up and ran just fine, until one day something curious happened:
The file would show up in the column-view Finder window of the iMac's desktop when I opened it from the Finder Window, but would, after about a second, disappear!
If I try to import, on the Powerbook, some random file into the iMac's Desktop folder, it appears for a brief second and then the folder once again displays as empty.
I have trashed that wmv file, and yet sometimes its name blinks up on the iMac's desktop list (that is, again, the column view display in the Finder window).
This is profoundly weird.
Oh, and there's nothing changed or weird about the SHARING settings. Personal File Sharing is enabled on both computers, as is Printer Sharing, and itunes music sharing is also enabled. All of these continue to work just fine. Firewall is enabled, but always has been.
Owen

Well, when in doubt try all the obvious things FIRST!
I rank Disk Utility from the install disk, did a disk repair, and, well, Bob's your uncle, and all is fine again. Apparently that ghost file screwed up the count of files (I'm not sure what that means, but it seems consistent with a file that would materialize and then disappear, and screw up display of a folder's contents - the folder it was lurking-in invisibly.
Very peculiar, none the less.
Owen
I'll leave this open for another day, if only to see if someone has an explanation for what may have happened, since that might be useful to others, besides satisfying my own curiosity.

ITunes won't recognize iPod - Extreme frustration!

So iTunes won't recognize my new IPod Video. It works fine with my kids' shuffle, mini and 4th gen but when I connect my new iPod I just get a window with: "iTunes cannot read the contents of the ipod "IPOD". Use the IPOD Software Updater Application to restore the IPOD to factory settings"
I've been trying since Christmas to get this thing working. I've tried the five R's, I've tried every combination of everything suggested on the Apple site, (including posts here) I've tried stuff from other apple users sites. No joy. I just got off the phone with the help rep from Apple. He talked me through the MSCONFIG stuff, no joy still. He told me to go to depot.info.apple.com/ipod and fill out the forms and they'd send me a package to put my iPod in to send them so they could fix it. It's personalized so it'll take an extra 3 weeks to fix. Needless to say, I'm very frustrated and extremely disapointed.
Merry Christmas.
Windows XP

Looks like you're another victim.
http://discussions.apple.com/thread.jspa?messageID=1432706&#1432706

IMac G5 PPC without Airport Extreme Card.... Can install one?

I bought a 20" iMac G5 in November 2004 and it didn't come with a wireless card. Can I buy an Airport Extreme card from Apple and install it? I've been searching these forums and there seems to be a question of whether there's already an antenna in there to connect to. Would appreciate anyone's advice and guidance.
Also, is their a USB dongle WiFi receiver that works with this iMac? Just wondering if that may be a better option?
Thank you very much for your help.
Mac OS X (10.4.9) iMac G5 PPC

Yes you can purchase and install the AirPort Extreme card in your iMac G5.
I've been searching these forums and there seems to be a question of whether there's already an antenna in there to connect to.
Yes there is.
The best wireless option is the AirPort Extreme card.

IMac Won't Recognize Airport Extreme

Similar Messages

Maybe you are looking for