IMac won't sleep after Mavericks upgrade

After installing the Mavericks upgrade, I notice that my late 2012 iMac computer does not enter sleep mode, while my monitor does. The Energy saver settings are the same as before the upgrade (computer and monitor sleep after 10 minutes, i.e., system default settings). Has anyone else experienced this?
Thanks for any comments.
LB

This is always due to a process keeping the system awake, but determining which is the challenge.
A first simple step is to create a new, temporary user account. Log out of yours and log into the temporary one. Determine if it sleeps then. If it does then you have a login item that is preventing sleep. System Preferences > Users & Groups > Login Items.
Whenever you suspect a problem related to power, including sleep, an SMC reset is also recommended.
Active Spotlight indexing will prevent sleep. Wait for it to complete. Allow a considerable amount of time following an OS X upgrade.
Check your Sharing preferences for anything that could permit an active network connection.
Energy Saver "Wake for network access" can prevent sleep, but unchecking it will prevent the ability to remotely access a sleeping Mac over a network. A normally functioning Mac will sleep according to Energy Saver, but will wake periodically for network access, after which it will return to sleep according to the settings in Energy Saver.
Unfinished print jobs will prevent sleep. If a print job is queued, but if the printer is off or the connection to it is lost, the Mac will stay awake forever waiting for the printer to return.
Safari pages that periodically refresh themselves are very common. This will prevent sleep.
Frequently checking for new mail may prevent sleep. Change Mail's preferences to check for new mail less frequently.
iTunes and iPhoto sharing will prevent sleep.
Active Bluetooth devices will prevent sleep.
Active USB devices will prevent sleep.
Using Time Machine over a network can prevent sleep.
There are plenty of third party utilities designed to prevent sleep. One may not have been completely uninstalled.
Quit the process with the name powerd in Activity Monitor. It will re-launch on its own.
Any number of "anti-virus" utilities can prevent sleep, along with other miseries. Get rid of them.
Read Mac OS X: Why your Mac might not sleep or stay in sleep mode

Similar Messages

IMessages won't open after Mavericks upgrade

iMessages won't open after I upgraded to Mavericks. I keep getting prompted to "enter the keychain password," but I never created a keychain. I never used it before the upgrade, and I skipped the step during the upgrade because I did not want to use keychain and it was an option to skip it during set up.

HI,
The OS X Mac have been using Keychains for a long time.
In the Applications/Utilities folder open Keychain Access.
This should show you at least two keychains.
The Login one for your Mac User account and the System one.
Generally speaking the Keychain keeps the passwords used by various apps and it needs to be Open.
In most cases the Login password for the Mac Account user is also the password that opens the Keychian when the computer is started up.
As each Mac User Account owns it's own Keychain there can be issues when you drag an account from one computer to another rather than using Migration Assistant.
i.e. you might Own it on one computer but not on another.
In the Finder > Go Menu hold down the ALT key and select the Library that appears.
In the library navigate to Keychains.
Click to highlight the Login one.
Now use the CMD and i keys together (Get Info)
At the Bottom unlock the padlock
Highlight the name that has (me) next to it (it should be your Shortname).
Once you have highlighted this use the cogwheel item at the bottom.
This should be greyed out but saying "Make you (Me) the Owner."
You should also have Read and Write permissions like in the Pic.
8:48 pm Sunday; December 29, 2013
 iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Mail won't launch after Mavericks upgrade OS X 10.9

This is part of the error message I receive:
Process:         Mail [315]
Path:            /Applications/Mail.app/Contents/MacOS/Mail
Identifier:      com.apple.mail
Version:         7.0 (1816)
Build Info:      Mail-1816000000000000~1
Code Type:       X86-64 (Native)
Parent Process: launchd [185]
Responsible:     Mail [315]
User ID:         501
Date/Time:       2013-11-02 21:36:27.404 -0700
OS Version:      Mac OS X 10.9 (13A603)
Report Version: 11
Anonymous UUID: 66917214-C98E-90B9-0022-46A9AFC950C9
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_PROTECTION_FAILURE at 0x00007fff5078fff8
VM Regions Near 0x7fff5078fff8:
    MALLOC_SMALL           00007fb792856000-00007fb793000000 [ 7848K] rw-/rwx SM=S/A
--> STACK GUARD            00007fff4cf90000-00007fff50790000 [ 56.0M] ---/rwx SM=NUL stack guard for thread 0
    Stack                  00007fff50790000-00007fff50f90000 [ 8192K] rw-/rwx SM=COW thread 0
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0   com.apple.CoreFoundation          0x00007fff94402000 CFEqual + 352
1   com.apple.CoreFoundation          0x00007fff943edd18 CFBasicHashFindBucket + 3528
2   com.apple.CoreFoundation          0x00007fff943ecf1f CFDictionaryGetValue + 111
3   com.apple.CoreText                0x00007fff8c022570 TBaseFont::CopyAttributeInternal(void const*) const + 68
4   com.apple.CoreText                0x00007fff8c0bafaf TInstanceFont::CopyTraitsInternal() const + 43
5   com.apple.CoreText                0x00007fff8c0b446b TBaseFont::CopyTraits(bool) const + 35
6   com.apple.CoreText                0x00007fff8c0bafd2 TInstanceFont::CopyTraitsInternal() const + 78
I've tried verifying the disk, and repairing the desk, but can't find a fix. It won't launch at all ever since the Mavericks upgrade.

If you did not install the software following the upgrade but did some form of transfer or migration then you should probably uninstall and then use the Cleaner Tool. After that install using the discs or a downloaded set of installation files.
Adobe Creative Suite Cleaner Tool
helps resolve installation problems for CS3 thru CS6 and for Creative Cloud
http://www.adobe.com/support/contact/cscleanertool.html

IPhone config utility won't work after Mavericks upgrade

After my upgrade to Maverics, any time I try to use the iPhone Config Utility to install apps on my devices, when I click install, it crashes iPhone config utility. I've already tried re-installing iPhone Config Utility - Any recommendations? This is killing my productivity!

If you are using the Apple configurator there is an update Apple has reasleased for it for support for Mavericks. It seems to be working for me but I'm also using it with the iPad 4th gen.

IMac camera stopped working after Mavericks upgrade

I just upgraded my iMac to Mavericks and the camera now refuses to work.
Details are:
I've performed every step in this tip https://discussions.apple.com/docs/DOC-6431
Performed all steps in this trouble shooting article http://support.apple.com/kb/HT2090 - yes every step!
Reset the SMC http://support.apple.com/kb/HT3964 and PRAM http://support.apple.com/kb/HT1379
I've installed the Mavericks update OS X Mavericks 10.9.2 Update (Combo)
In addition it makes no difference in another user or in various camera apps and all Apple apps mentioned here http://support.apple.com/kb/PH14085 freeze and need to be force quit.
I've checked and repaired disk permissions, even restarted from recovery partition and checked the disk.
This computer worked fine up until the second I upgraded to Mavericks.
Computer:

You have certainly been thorough!
dnw76 wrote: ... I've performed ... all steps in this trouble shooting article http://support.apple.com/kb/HT2090 - yes every step!...
One of the steps in http://support.apple.com/kb/HT2090 is
If your built-in iSight camera is still not behaving correctly after trying all these steps, you may need to contact Apple or an Apple-Authorized Service Provider for service.
What service did the service people tell you was still needed to get your iMac working correctly and why did you not do that?

DVD drive won't work after Mavericks upgrade

I upgraded to Mavericks from Snow Leopard, and ever since, my CD/DVD drive will not work. Discs spin, but then they are ejected. Doesn't matter what type of disc I put in.
The drive was working fine before I upgraded. I have reset the SMC and the NVRAM/PRAM, but the drive still isn't working.
Any suggestions for what else I can try?

Others here wouldnt recommend it, but on a new OS install, since I have a giant pile of HD, ...i just grab another HD and create a new fresh Time Machine backup
after its complete, I take the original HD with the OLD backup and format/erase it.
Im a tad too lazy to wait, as you yourself mentioned, 1 hour for TM just to PREPARE to backup. Nope, no,...not gonna do it.
I updated 4 Macs to Mavericks and id rather make a wholly NEW Time Machine backup on another HD and erase the original.
Since I keep about 12+ redundant archives of my important data, I have no worry on earth of ever losing data.
Time machine is a backup, NOT an archive for vital data.
Methodology to protect your data. Backups vs. Archives. Long-term data protection

Help with Adobe Premiere Elements 11 Editor - Won't work after Maverick upgrade

I bought Adobe Elements 11 in March of 2013. It was working fine until upgrading to Maverick. It will not open now. Adobe will not help without a serial number. Apple does not provide serial numbers when you buy directly from the App Store. After 3 hours of trying to unintall and reinstall, no luck. Apple said to call Adobe back, Adobe says to call Apple. Finally just asked Apple to refund me the $85.00. They said said they ‘can’t’ since I’ve ‘had it for so long’ (7 months ?? ). They said the problem was my fault because I didn’t check and make sure Adobe Elements was compatible with Maverick before installing Maverick. I should mention that it states (on the App Store page) that Adobe Elements 11 is "compatible with OS X 10.7.5 or later”.   Just wondering if anyone else has experienced this problem and if any kind of resolution was achieved?   Again, any help would be greatly appreciated.
Tony

Yes and no help.
See discussion
Please visit http://www.adobe.com/support/contact if there are more questions for Adobe. Thank you.
General Info
Chat start time      Dec 13, 2013 6:52:37 AM EST
Chat end time      Dec 13, 2013 7:08:55 AM EST
Duration (actual chatting time)      00:16:18
Operator      Vaibhav
Chat Transcript
info: Hi, there are several customer(s) in line ahead of you. We'll be with you as soon as possible. Thank you for your patience.
You might also try our community forums, where experts are online 24/7.
info: You are now chatting with 'Vaibhav'
Vaibhav: Hello. Welcome to Adobe Technical Support.
Vaibhav: Please allow me a moment while I look into your account & verify the details.
Jerry: okay will wait
Vaibhav: Can you elaborate the issue please?
Jerry: I've been trying to open the app, its does not open it give me an error
Vaibhav: Well we are getting many customer with this issue
Vaibhav: premiere elements 11 is not compatible with MAC 10.9
Jerry: okay what are you doing to resolve the problem
Vaibhav: Well if there will be any update we would inform all the customers right now we have send this to engineering
Jerry: A friend of mine was sent a link that allowed them to reinstall the application and they were also given a serial number as well can't you do the same for me I really need to use this application asap
Vaibhav: for this you need to contact customer services or sales
Jerry: I'm not looking into buying a new copy I NEED HELP!!!!!!
Vaibhav: Well we can not help in this case as this version was released before mac 10.9
Vaibhav: and if you want to use it on MAC 10.9 you would need to purchase Premiere Elements 12 and for that need to contact sales
Jerry: It looks like I am not going to get the same help as every one,just no that you've lost a customer in me
Vaibhav: Well there is nothing that we on chat or phone can do in this
Vaibhav: Thank you for contacting Adobe. Good Bye.
info: Your chat transcript will be sent to [email protected] at the end of your chat.

Seagate 1TB won't mount after mavericks upgrade

Last night I upgraded my White early 2009 macbook from snow leopard to mavericks 10.9.2 and now i cannot mount my Seagate 1Tb external usb hard drive, It appears in disk utility and the drive is there but the partition on the second line is faded and it will not mount. When i try to mount the drive i simply get an error telling to run first aid but first aid simply tells me that i need to format the drive. as this is my main drive with all my back ups on it i do not have another drive that can hold all of my data. also when i booted the macbook into the recovery module after holding option at startup the drive appeared healthy and fine under disk utility there but under the full os i cant open it in Finder. Its not the drive as i can use it perfectly fine on my other laptop and pc. I need this resolved asap please

Not without making some applications unusable.   A clone backup can restore the notebook back to the prior operating system, if you made one prior. Or if the last Time Machine backup was of the prior operating system, the internet restore can be done to the prior operating system.
But installing an old operating system on a new, you will find newer applications will not work on older operating systems if they weren't designed for them, or weren't installed on them. Not to mention some drivers that existed may create untenable problems in the same manner.
You can modify your internal hard drive partitioning without erasing it, but that is risky if there is anything invisible that is marginal about the internal drive.   I would still make a clone backup before attempting it if there was none made before.
At this point I'd try to recoup the loss on the hard drive if it is past the return period where you bought it from on http://www.gazelle.com/ and then get a compatible hard drive from http://www.macsales.com/ to make any clone you need.   If there is any data you need on that hard drive, recoup the loss after you install an older operating system on a USB Flash drive such as a 32 GB.
Sources for getting each Mac OS X version prior are on my user tips:
https://discussions.apple.com/docs/DOC-3761 and earlier.

Video Problem with iMac to Apple TV after Mavericks upgrade

Since upgrade to Mavericks, my Apple TV receives audio, but not video from my iMac.

How are you connecting to the Apple TV?

IMovie, IPhoto won't update after Mavericks upgrade from OSX 10.06

Upgraded to Mavericks, iMovie won't update, says, "This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled." And then I get a null error.
However, I am using the only apple ID I have to sign in to the app store.

You can update for free to version 9.5.1 in the App store
LN

After Effects CS6 Won't Launch After Mavericks Upgrade.

Hi All,
I have seen a few posts regarding this and have scoured the web for few hours looking for answers. So far all I have found are patches from Adobe and their asking that we uninstall and reinstall the app.
None of this has worked so far.
In fact I've gone from an error of "Can't use this version" to adding the patches to now getting "After Effects Cannot Be Opened Because Of A Problem". It goes on to add this...
Check with the developer to make sure Adobe After Effects CS6 works with this version of OS X. You may need to reinstall the application. Be sure to install any available updates for the application and OS X.
Click Report to see more detailed information and send a report to Apple.
Two questions:
1. Is there a fix for this?
2. If not, how can I revert back to 10.8 without losing everything.

Ok, I found one more article talking about upgrading to 11.3 upgrade instead of 11.4(latest). Finaly worked. Hope this helps someone else, this was painful.

Dual 867 MDD won't sleep after memory upgrade

Since yesterday my PowerMac G4 Dual 867 MDD has become insomniac. What changed since yesterday is that I installed an additional 512MB of RAM. So far as memory is concerned, there's the factory-installed 512 Infineon module; a second 512MB Kingston module (installed about a couple of years ago, and has been working fine ever since); and a third 512MB Kingston module (the one I installed yesterday) for a total of 1.5GB.
I am aware that sleeping issues can arise for all sorts of reasons (inc. USB peripherals) but it is pretty obvious that in my case the problem is caused by the memory upgrade.
The symptoms: Once I click Sleep on the Apple menu, I can hear the sound of the hard disks spinning down, but the rest of the box remains fully powered. The screen freezes and the computer has to be manually switched off, as the mouse cursor disappears from the screen and the keyboard becomes completely unresponsive.
So far I have tried the following: I have reset the PRAM (no luck there), and have tried switching memory modules to different sockets (basically, the single remaining free slot). I apologise in advance if that second troubleshooting routine might portray me as an ignoramus; I have a good understanding of things but cannot claim to be an expert.
I am a extremely frequent user of the sleep mode, and this issue has taken away from me all the pleasure that comes with a coveted (and long overdue) memory upgrade. I would deeply appreciate any help in resolving this.
Many thanks

Dear Dave,
Many thanks for your prompt response. I ran Rember (Amount of memory to test: "All". All other boxes unchecked - I was running other apps at the time). I cannot understand the results from the log, but I didn't get any feedback at the end of the testing. I attach the contents of the log below:
Memtest version 4.13 (32-bit)
Copyright (C) 2004 Charles Cazabon
Copyright (C) 2004, 2005 Tony Scaminaci (Macintosh port)
Licensed under the GNU General Public License version 2 only
MacOS X (Darwin) running in multiuser mode
POSIX version 200112
Pagesize is 4096
Requested memory: 18MB (19693568 bytes)
Available memory: 18MB (19693568 bytes)
Allocated memory: 18MB (19693568 bytes) at local address 0x02008000
Attempting memory lock... locked successfully
Creating test buffers...
Buffer A: 9MB (9846784 bytes) at local address 0x02008000
Buffer B: 9MB (9846784 bytes) at local address 0x0296c000
Running 1 test sequence...
Test sequence 1 of 1:
Stuck Address : ok
Random Value : \ ok
Compare XOR : ok
Compare SUB : ok
Compare MUL : ok
Compare DIV : ok
Compare OR : ok
Compare AND : ok
Sequential Increment: ok
Solid Bits : setting 1 of 64ok
Block Sequential : setting 1 of 256testing 224 of 256setting 225 of 256testing 225 of 256setting 226 of 256testing 226 of 256setting 227 of 256testing 227 of 256setting 228 of 256testing 228 of 256setting 229 of 256testing 229 of 256setting 230 of 256testing 230 of 256setting 231 of 256g 238 of 256setting 239 of 256testing 239 of 256setting 240 of 256testing 240 of 256setting 241 of 256testing 241 of 256setting 242 of 256testing 242 of 256setting 243 of 256testing 243 of 256setting 244 of 256testing 244 of 256setting 245 of 256testing 245 of 256setting 246 of 256testing 246 of 256setting 247 of 256testing 247 of 256setting 248 of 256testing 248 of 256setting 249 of 256testing 249 of 256setting 250 of 256ok
Checkerboard : setting 1 of 64ok
Bit Spread : ok
Bit Flip : setting 1 of 256ok
Walking Ones : setting 1 of 64ok
Walking Zeroes : setting 1 of 64All tests passed.
Thanks again,
Alex

Time machine won't work after mavericks upgrade

Is there a way to fix it? Time machine is stuck saying it's preparing for backup.

Others here wouldnt recommend it, but on a new OS install, since I have a giant pile of HD, ...i just grab another HD and create a new fresh Time Machine backup
after its complete, I take the original HD with the OLD backup and format/erase it.
Im a tad too lazy to wait, as you yourself mentioned, 1 hour for TM just to PREPARE to backup. Nope, no,...not gonna do it.
I updated 4 Macs to Mavericks and id rather make a wholly NEW Time Machine backup on another HD and erase the original.
Since I keep about 12+ redundant archives of my important data, I have no worry on earth of ever losing data.
Time machine is a backup, NOT an archive for vital data.
Methodology to protect your data. Backups vs. Archives. Long-term data protection

Time Machine Won't Work after Maverick Upgrade

Hi,
I updated my operating system to Maverick the other day.
Today I tried to restore a file from Time Machine, but when I "Enter Time Machine" none of the functions seems to work.
I tried to press pretty much every date, and every button, but nothing works.
Any suggestions on what to do short of restoring to the old ios?
Thanks.

Others here wouldnt recommend it, but on a new OS install, since I have a giant pile of HD, ...i just grab another HD and create a new fresh Time Machine backup
after its complete, I take the original HD with the OLD backup and format/erase it.
Im a tad too lazy to wait, as you yourself mentioned, 1 hour for TM just to PREPARE to backup. Nope, no,...not gonna do it.
I updated 4 Macs to Mavericks and id rather make a wholly NEW Time Machine backup on another HD and erase the original.
Since I keep about 12+ redundant archives of my important data, I have no worry on earth of ever losing data.
Time machine is a backup, NOT an archive for vital data.
Methodology to protect your data. Backups vs. Archives. Long-term data protection

IMac won't boot after ram upgrade

For some reason, my iMac late 2013 3.4Ghz quad core i5 won't boot with new ram modules added. New ram is exact same specs as original that came with the iMac. I've tested the new ones on their own in the iMac, and the system boots up fine. Same goes with just using the original ram. But when I put all 4 together, the iMac doesn't boot up. Not even the chime.
Combinations I've tried are:
1-Old
2-New
3-Old
4-New
No boot
1-New
2-Old
3-New
4-Old
No boot
1-New
2-Old
3-New
4-empty
No boot
1-Old
2-New
3-Old
4-empty
No boot
1-New
2-Old
3-Old
4-New
No boot
1-Old
2-New
3-New
4-Old
No boot
The only combinations that work are:
1-New
2-empty
3-New
4-empty
Boot good
1-Old
2-empty
3-Old
4-empty
Boot good
I just got off the phone with Apple, and they are saying all modules have to be the same size. ie. all 4GB or all 8GB. Can't mix and match sizes. Which is strange, because I've never heard of this. My Mac Pro has different speed ram modules, with different sizes in it. As long as I install ram in pairs, it runs like a charm. I've even heard the new iMacs don't have to have ram installed in pairs.
I'm wondering if slot 2 and 4 are maybe damaged? I haven't tried using just slot 2 and 4. To my understanding, you have to use 1 and 3 first. Can anyone confirm this?
Also, I've read a couple of people had to wait 30 seconds for the chime when they installed new ram in their iMacs. I didn't wait 30 sec to see if it would boot. Never heard of any Mac taking 30 sec to just chime in. lol Has anyone else experienced this? Is there a fix? Tx.

CLICKY CLICK---> iMac: How to remove or install memory
Or
Apple>About This Mac>More Info>Memory: Double click "Memory Install Instructions" at the bottom right of window.
my iMac late 2013 3.4Ghz quad core i5
Conflicting info. Your system profile shows: Mac Pro, Mac OS X (10.6.8). Please update/correct.

IMac won't sleep after Mavericks upgrade

Similar Messages

Maybe you are looking for