IMac won't start up, don't have Install DVD. Is there any hope at all?

Hi Everyone,
I have a Non-Intel iMac G5 2.1ghz, it has performed flawlessly until last Thursday when I installed a Security Update (as prompted by OS X) and then rebooted. It loads to the grey screen with the Apple Logo and the spinning wheel.
It goes no further at all.
I don't have my original disks.
I have reset the PRAM and still no go at all. I've also unplugged the power cable, plugged it back in with the power button held down.
Nothing. Zilch. Nada.
Am I completely screwed? Is there absolutely anything at all that I can do?

Hello again, sweeet (and welcome from up over...LOL):
I am not sure why your system would show up - did you "ping" it from the network tool, or does it just show in the network summary (I think it would be there from before, although networking is not an expertise of mine)? In any event, without the software install DVD, it is really hard to suggest anything else than to head in for a diagnosis.
Good luck.
Message was edited by: Barry Hemphill

Similar Messages

My iPhone 4s notified me that I had to manage my storage so I deleted apps that used a lot of space I deleted almost all my picture and it still keeps telling me I don't have enough storage is there any other way I can make room on my phone ?

My iPhone 4s notified me that I had to manage my storage so I deleted apps that used a lot of space I deleted almost all my picture and it still keeps telling me I don't have enough storage is there any other way I can make room on my phone ? Were it shows how much storage I have available it still says 9.9 even after all that I have done so I don't know if I need to change my storage plan or what but anything will help I guess

Check for 'others' in iTunes against your iPhone.
Restore from a previous backup to reclaim some of it.
Still want more, Restore in iTunes, setup as New.

Help! iMac doesn't start, alarming audio signals, no hard drive...any hope?

I have a 17" G5 iMac, the iSight model. Bought it pretty much exactly two years ago, when they were first released.
Problem history:
About a year ago (just too late to get Applecare) the superdrive started acting funky, wouldn't burn double layer and wouldn't read some dvd's. Ended up buying an external LaCie burner, that was cheaper than getting the built-in one replaced.
About half a year ago, one vertical line of pixels died in the LCD. Annoying. But it was pretty far to the right, so I could live with it, as it didn't affect performance.
About a month ago, a second vertical line of pixels died....I still tolerated it, as the computer itself was functional, and I'm pretty cheap.
LAST NIGHT: While browsing in firefox, the system freezes. Spinning beach ball, nothing is responding. I end up shutting it down by holding the power button. Now when I turn it on, it keeps making an annoying signal, sounds like a cheap cell phone ring, with a vibrating sound to it. Over and over. Eventually it gives me a blank screen with a folder icon with a blinking question mark. So I read up in the manual, and it says, "in case of blinking question mark, start up the computer while holding the option key, then click on the hard drive icon, and then click on the continue button". I go ahead and boot with the option key....and no hard drive icon appears! Just a refresh button and a continue button. So I'm stuck.
My interpretation: The computer cannot detect the hard drive, for whatever reason, and therefore cannot boot. Does this sound right?
Is this another one of those "common problems" with iMacs from around that time? Cause I'm just about getting tired of those... I only hope that no matter what happens, my hard drive's contents are not lost. This would be disastrous.

Well, it turns out it is a defect hard drive. The cellphone-like sounds, along with a "vibrating" sound are actually made by the hard drive itself, not the Mac.
Our IT specialist says it's most likely the head scraping on the disk surface. Very bad news, as that would really be reducing any chance of my data still being intact...
We extracted the hard drive (major pain in the *** - thanks for the design, Apple!), and it's going to a data recovery specialist.
Lessons learned so far: Be wary Apple's hardware reliability, ergo GET APPLE CARE, and back up your stuff!!

I downloaded the new iOS software on my iPod touch 4th gen. Now it's saying connect to computer with iTunes, I only have a iPad I don't have a laptop is there any way to bypass this

I Downloaded the new iOS software on my iPod touch now when I turn it on it has a USB cord and says connect to computer and iTunes, well the only other

No. You have to connect the iPod to a computer and restore via iTunes.
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Find a friend or go to an Apple store.

My iMac won't start. I have to press T and mount it to an old G4.

My iMac won't start. I have to press T and mount it to an old G4 then eject then boot but slow and lots of beech balls. First aid says it has a 'Invalid key length' in 1 volume and can't be repaired. Will an upgrade to Mountain lion from Snow Leopard help or Disk Warrior as my files won't install.

Thanks PATRICKMELE for your response, however I'm not sure if my Time Machine backup is trustworthy. I had a problem with that about 2 weeks ago and I took to an Apple Genius who ended up wiping my Time Machine backups. The new backup took 9 days and now looking at Time Machine Preferences it shows 1.59 GB of 3TB available; Oldest backup: None; Latest backup: None?
I'm taking your advice and calling Apple Support as soon as possible. Thanks for your help

17" C2D 2 gHz iMac w/fresh install of Tiger won't boot to desktop; takes me through setup, then instead of normal boot, it re-enters setup. (I don't have install disks)

Hi, I just bought an iMac from E-Bay, a pre-aluminum, 17" C2D 2.0 gHz machine. The seller told me that he wiped the hard drive and installed Tiger, with a borrowed disk, so I don't have install disks.
I booted up the computer and it took me through the initial setup process. Everything seemed slow, it took a couple of minutes to get to the setup intro screen. After going through setup, it looked like it was going to go for a normal boot, but it re-entered setup. I went through the process 3 times, and it wouldn't let me choose the same user name twice, so it seems to have created 3 user accounts. But I can't get it to boot to a normal Finder desktop. Safe mode is no-go. I reset the pram, no change. I plan on trying to boot using Linux Mint on an external USB, to see if the hardware is functioning.
Any suggestions or insights
Thanks!

You're not getting many hits here, try reposting at the Tiger site:
https://discussions.apple.com/community/mac_os/mac_os_x_v10.4_tiger

24" iMac won't start when iPod is connected

My 24" iMac won't start up/restart if my iPod is already connected to it. If I restart with the iPod connected, I just get a gray screen (with no apple logo) forever. Has anyone else experienced this problem? If so, any solution? I have Windows installed with boot camp, don't know if that's the problem, but I tried reseting the p-ram, but to no avail...
Intel iMac 24", 7600 GT, 500GB, 2GB. Titanium Powerbook 667 MHz G4, loaded. Mac OS X (10.4.7) 30 GB iPod Video

My suggestion would be disconnect the iPod. That's just me though.
http://docs.info.apple.com/article.html?artnum=93953
I'm guessing Boot Camp is the culprit. Whatever emulated BIOS it's using doesn't like the iPod as a startup disk.

IMac won't start - should I reinstall OS?

Recently my iMac won't start up - it goes to screen with folder + question mark. I've run Disk Utility, repaired hard drive, but there were no reported repairs to make.
Occassionally it will start up, and everything seems normal until suddenly the beach ball appears and everything freezes. 99% of tries it won't start up (i get the ? folder). Is it worth erasing the disk and reinstalling everything to see if a fresh start will help, or is it likely that the hardware is damaged?
Don't want to bother erasing it if there's no point... any advice greatly appreciated.
Also - anyone who's had their iMac repaired - what are the costs like?

I've just suddenly had the same problem - for no apparent reason as far as I can tell. The night before last I switched off my iMac as normal, and yesterday morning switched it back on. At first it would start, but crashed as soon as I tried to start any applications. Then it wouldn't start at all, and just got as far as the gray screen with the apple on it. After trying resetting the PRAM, switching on and holding the on button for 10 seconds, it was no different...
So, I tried doing a archive-reinstall from the original leopard DVD I bought from apple. This did a successful disk verification, but then said it couldn't install mac os due to a problem with the basesystem package. After that it wouldn't let me try another archive-install and only gave the options to install as new, or erase and install. The latter I don't want to do, and the former just gives the same basesystem error... All I get now is a flashing folder with a question mark and not even the gray screen...
I have tried using the diskutility to verify/ repair the hard drive and it says all is well...
I have heard this may all be due to dodgy RAM chips, but I have never messed with them or altered them. It just seems odd they should suddenly fail when they were working fine before.....
Any ideas would be much appreciated. A lot of data at risk
Dan.

IMac Won't Start Up/Boot

My iMac won't start up. I've tried holding all kinds of key combinations while I turn it on, but it doesn't even get that far. It gets stuck on a folder with the Apple picture alternating with a question mark. It doesn't do anything else for a while, and then the fan turns on (???).

This is indicative of a corrupted system or drive. The first thing to try is:
Repairing the Hard Drive
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer. Now shutdown the computer for a couple of minutes and then restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
If this doesn't solve the problem then you will have to reinstall OS X. If the drive tests out OK per the above then you can reinstall without erasing the hard drive:
How to Perform an Archive and Install
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.
Why reward points?(Quoted from Discussions Terms of Use.)
The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

My iMac won't start normally it will start on safe boot unless I start in verbus mode single user mode or reset the pram but if I start this way it won't sleep

help mi imac won't start normally

Hello!
Can you tell us what happens?
I’ve offered the steps below to similar posts in the past and they helped out getting to the solution (or at least find the cause). I suggest them to you too in this case. It will take you about 30 minutes or less to do these, depending on how bad the problem on your Mac is.
The goal here is to boot your Mac to the so-called Recovery partition where you’ll have a chance to repair the disk and the disk permissions using the Disk Utility and Password Utility. This might solve your issue and even if it doesn’t- it’s still a decent maintenance step to perform. These steps won’t erase your data or reinstall your Mac in any way if you follow instructions carefully.
Here’s how:
1/ Make sure your computer is completely shut down.
2/ You’ll have to be quick next: Press the Mac’s power button. As soon as you either hear the loud chime, or see the display light up - usually after a second or 2 - on your keyboard press [cmd] + [r] Keep these keys on your keyboard pressed until you either see an Apple Logo with a loading bar or a spinning gear.
After a few minutes, you’ll be presented with a Utilities screen. This is the Recovery partition. If this step is already giving you problems, try using a USB-keyboard. It doesn’t have to be an Apple-keyboard. If you have a Windows-tailored keyboard laying around, use the “Windows-flag” key in stead of the [cmd]-key and it should also work.
3/ Choose Disk Utility and click [continue]
Disk Utility will display your computer’s harddrive in the left column. The default name for it is “Macintosh HD” and is usually the second one from the top. Click on it and click on the [verify disk] button. This will check your “Macintosh HD” harddrive partition for errors. If found, click [repair disk] unless you have a Fusion drive in your Mac and it says [fix] instead of [repair disk] please tell us before you continue! For a screenshot of what I mean, check this article from Apple: http://support.apple.com/en-us/HT202574
4/ Once done with the verifying or repairing of your “Macintosh HD” click [repair disk permissions]
This will check your partition for permissions errors. A common myth about this feature is that it will fix all permissions issues on your Mac, which is not true, but it will fix most systemwide issues. Also, here is a list of error messages that you can safely ignore if they pop up:
http://support.apple.com/en-us/HT203172
5/ Lastly we shall do a permissions/Access Control List repair on specifically your user’s home folder with a somewhat hidden tool in the Recovery partition. Close Disk Utility and find the menu called “utilities” in the top left corner of your computer’s display. It’s in between the menus “edit” and “window” Don’t be confused with the menu called “os x utilities”
Choose Terminal. A somewhat old-fashioned looking window will pop up, waiting for a text command from you. This is the Terminal.
After the # type: resetpassword and press return. Note that there is no space between ‘reset’ and ‘password’
What you’ll see next is an rectangular window that gives you the option to reset passwords. We are not going to that, however. Instead, click on “Macintosh HD” at the top. In the pull-down menu below that, choose your user's accountname. Skip all the rest and at the very bottom click the [reset]-button.
A spinning gear will appear and may stay on for a second or several minutes. It’s hard to predict exactly how long.
If you have multiple users on your Mac, I advise you to repeat this step for all your users.
We’re ready to reboot your Mac now. Click on the Apple Menu and choose “startup disk” Choose to boot from “Macintosh HD” Please let us know if this solved your issue, or if the steps above did not work, or could not be performed for some reason.

Early 2008 iMac won't start up. Goes to apple logo and freezes

Early 2008 iMac won't start up. Goes to the apple logo but it has a couple of yellowish stripes on it. Then the whole screen gets the stripes and it freezes. Does the same thing using another start up drive or a recovery drive. Running Maverics. Help!

I work at an Authorized Apple Reseller and we are having the same problem with one of our showfloor models.
Model: iMac 21.5" (Brand New Core i3, etc)
Problem Description: When you press the power button, you hear the Apple chime and the screen turns on. Instead of booting normally, the screen shows the Apple logo, a spinning 'loading' circle (I call it a ferris wheel), and a loading bar below that. Typically the loading bar is for an EFI Firmware update, but I don't remember updating the iMac recently. Anyways, the loading bar moves once, starts over, and then the iMac shuts down.
Possibly Related Issue: Several days leading up to this issue, the computer was very noisy. It sounded like the hard drive was working overtime on indexing or something, but it ran fine and spotlight wasn't even indexing at all. I walked by it yesterday and noticed it wasn't on. I pushed the power button, and the problem it has now started.
I will keep searching the forum for a solution, but I have a feeling this is a hardware issue that will need to be serviced by Apple.
Sidenote: If anyone has any experience contacting apple as an Apple Reseller about repairing a computer before the warranty starts, any advice would be greatly appreciated

IMac won't start without install disc

Hi, I'm new to all of this. I tried resetting my admin password using install disc on my iMac as I'd forgotten it. Now iMac won't start without disc. If disc is ejected on restart apple logo flashes between no entry sign and folder with "?" on it. Will start up with install disc in, but then wants me to choose language and install OS. Tried repairing and verifying HD and all seems ok. Tried holding option key and selecting HD on startup, but same outcome - choose language and install OS. How do I get back to normal desk top? Do I have to install OS again? Will I lose data? Please, please help! Thanks.

It should only take a minute or so at most to boot from the DVD.
If your sure you have the correct Install Disk for that iMac, I'd start over. Then if it still doesn't work then perhaps a trip to your Local Apple Service Provider with the Disk or Disk and iMac is in order.
http://www.apple.com/buy/locator/service/
Alternately using the correct Disk as per the following article, see if you can run the Apple Hardware Test? > http://support.apple.com/kb/HT1509

IMac won't start up passed the grey screen

Last friday my iMac (late 2006, 24", 2.33 duo core Intel, OS 10.6.8) gave me the spinning beach ball.
Restarting resulted in: first the apple screen with the progress indicator, followed by grey screen..
That was it. It hangs at the grey screen.
I've been busy this weekend testing all kinds of ideas to get my imac to fully start up again.
I checked the RAM, it's fine.
I flushed NVRAM, wild guess, but nothing changed.
Starting up in safe mode doesn't work.
Starting up in recovery mode doesn't work.
On the upside, I was able to start my imac up in Target mode. Using the host computer and Disk Utlity I can see there's nothing wrong with the HD. All the data is still there!, so later today I'll make a copy of the complete HD, hoping/thinking that I won't copy whatever is wrong.
I had Disk Utility repair all the permissions.
I've used the host computer to reinstall the OS on my imac.
But on start up my beloved iMac still won't get passed the grey screen.
I'm thinking something goes wrong before my Mac even gets to the HD. Maybe it's the firmware, but I'm not really sure that firmware matters in this case. And I wouldn't know how to reinstall the latest version of firmware because my imac won't start up from it's disk drive
I'm thinking maybe something could be wrong with the graphic card's RAM, though on start up I can see the apple logo just fine.
I'm not able to start up from CD, I've tried that because I wanted to reinstall my OS (before I figured out how to do that in Target Mode) by putting the OS disk in my imac's own disk drive. Staring up with the C key still gets me the grey screen. Staring up with Option key shows no other option but the HD.
So is there anybody out there who has an idea that could help me further along?
Any help is greatly appreciated!
Frank

Hi Jan,
If you have another firewire Mac you can check if the HD of your Mac is OK by connecting them with a firewire cable and use target-mode. That way I found out my HD was just fine.
It also offers you the chance to run a diagnostic program to check if anything else is fine. I used TechTool to do that. But everything checked out fine.
In the end I decided the problem is probably hardware. Some electronic part that broke. Very frustrating that some small transistor or so is keeping me from using my otherwise fine iMac.
I contacted a repairshop that also works for the local Mac retailer. They told me my iMac was concidered 'classic' and therefor it wasn't economically not worth the trouble trying to repair it.
I gave up, took two weeks to mourn the loss of my beloved iMac, and bought a Mac mini.
FrankV
Judging by your name I'm guessing I could've anwered this in Dutch.

Imac won't start up n issues in single user mode

Imac won't start up after long time 'frazing' of Firefox. Manual start up ended up in the grey screen forever'processing' icon.
Had a look at other solutions, unable to enter safe mode. Someone mentioned to try single user mode and it went through half way with error messages on the screen which has no command line available for me to key in any letter.
My Imac has been out of warranty coverage for a while, how do I know if it's hard ware problems before paying for service?
Any help would be appreciated!
Alice

Yes, I have backed up and deleted old files using target disk mode with an old macbook. It's just the larger files I didn't have enough space and disks for. I really appreciate your help on this as I've never had any mac issues before this so am not really sure what to look for.

G5 iMac won't start! Help needed.

Got a new intel iMac. Gave my husband my old G5 iMac (not intel). It was working perfectly. For some reason unknown to me, he decided he was going to reinstall everything from scratch so he grabbed the first disk he saw and put it in the computer. It was the startup disk for an intel computer & NOT for the iMac G5.
Did he fry the computer? It won't start up. Keypad & mouse won't respond.
The screen can't find the driver (no surprise) and says "panic: we are hanging here...." I can't get the disk out of the drive. Service contract is up. Is there a way I can connect my laptop to it and get it to respond & spit out that intel disk? Perhaps if I open the cover up, I can into the CD drive and get the disk out. All ideas appreciated.

Quote
J.C posted "Re: G5 iMac won't start! Help needed." on Feb 4, 2008 4:53:20 PM.
Hi Mel Kev
Have you tried holding down the left mouse button when you turn the computer on. Holding down the left mouse button should force eject the disk.
Hope this helps
J.C
UNQUOTE
And it WORKED! (I really wasn't in the mood to do surgery on the computer this evening). Thanks all!!! You are awesome!
Now, if I can just find the original installation disks.... They are in this drawer somewhere....

IMac won't start up, don't have Install DVD. Is there any hope at all?

Similar Messages

Maybe you are looking for