IMac won't turn on (has been shutting down abruptly in the past)
Okay, hi everyone.
I've got a second hand iMac G3. It had problems with the hard drive earlier, so that's been replaced...
In the past month and a bit my computer has been abruptly turning off (not completely, the white light of the power button is still on when this happens) with no aparant cause. The screen just goes black like turning of a TV screen and I can't do anything but turn it completely off by holding the power button.
After this happens I would try and turn it back on, almost imedeiatly, but it wouldn't turn on: The power button would light up, and blink just slightly, with a slight tick/beep sound to accompany it. This is only straight afterwards though, if I leave it for a while then boot it up, it will be fine.
A lot of the time this has happened when I've just walked away from the computer without it doing anything, other times it happens right in the middle of doing something..
I haven't followed up the problem due to not knowing what it was at first and lack of time, especially this past month since I've been away overseas.
And now it's the last time it's shut down on me. I tried to start it up again straight afterwards, and of course the power light blinked slightly along with the accompaning sound. Turned it off, tried again a bit later, still didn't work. Now when I try to turn it on I press the power button, it lights up for a second then turns off. So my computer wont turn on, and I don't know what to do.
Hope one of you guys know what the problem is.
I was looking at these threads and someone had a similar problem (http://discussions.apple.com/thread.jspa?threadID=1168792&tstart=0), something about the flyback transformer I think, whatever that is. Does anyhone think this could be the problem??
Another thing. Just days ago I was having problems burning cd's (probably still am), something about error code 0x8002006D and not being able to calibrate enough laser power. I don't know if this has anything to do with it...
Thanx for putting up with me, usually it's my dad but he's asleep sick..
No Kittytom is referring to his having found that his iMac wouldn't boot right side up but would upside down. Further circuit disturbance showed that it was bad soldering on the Flyback transformer that was the problem.
Also common were bad soldering on the HV capacitors in the area of the FT. Or just bad capacitors.
If your iMac had cap problems it would exibit that behavior.
Slow breakdown in the insulation of the FT would also act like that.
Richard
Similar Messages
-
My iMac has been shutting down abruptly
My new iMac has been shutting down abruptly the past week and after that I have to wait several minutes to try and see if it will turn on. At first I thought it was overheating, but even after being on less than an hour it shuts down. Does anyone know the reason why this is happenig? Oh, and I was just browsing on the internet, there were no weird programs runnig and the anti virus scan says it's clean.
Back up all data immediately as your boot drive may be failing.
This diagnostic procedure will query the system log for messages that may indicate a hardware fault. It changes nothing, and therefore will not, in itself, solve your problem.
If you have more than one user account, these instructions must be carried out as an administrator. I've tested them only with the Safari web browser. If you use another browser, they may not work as described.
Triple-click anywhere in the line below on this page to select it:
syslog -k Sender kernel -k Message CReq 'GPU D|I/O|nspace-h|n Cause: -|timed? ?o' | tail | open -ef
Copy the selected text to the Clipboard (command-C).
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V).
The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
A TextEdit window will open with the output of the command. Normally the command will produce no output, and the window will be empty. If the TextEdit window (not the Terminal window) has anything in it, post it — the text, please, not a screenshot. The title of the TextEdit window doesn't matter, and you don't need to post that. -
IMac won't turn on after scheduled shut down
Hi, hope someone here can help me!
I have a 20" 2006 iMac. While it was still under warranty, it repeatedly froze, and eventually when I turned it on the screen remained blank although I could hear that the hard drive was at least trying to get started. I got it repaired (new logic board, new screen), but now I am having some of the other difficulties mentioned here, where the screen freezes when using graphic intense software, including 3D games. Sometimes, it works fine for hours, others less than 2 minutes. I used to keep it on all the time, with energy saver set to go to sleep when possible. I've found, though that the graphics problems are less likely to happen if it has been off at least overnight, so I set up the schedule for it to turn itself off in the small hours. The problem is, when I go to turn it back on, it won't come on unless i pull out the power cable from the back of it and put it back in again. Any ideas what's causing this? And any ideas on what I can do to fix it?
ThanksThis just happened to me today. Not sure what to do as yours was the only discussion like this.
Please let me know if you were able to restore it and how?
Extremely frustrated since it was brand spankin new!! -
My Imac won't turn on. Randomly shut down and randomly shuts off
Yesterday night i was working on my imac and left it on for about an hour leaving the desk. When i came back it was shut down and wasn't able to turn it on. This morning i unplugged it and plugged it to another plug and it turned on. After a while it turned of again and wouldn't turn on. I re-changed plugs here and there with random success. I then changed the the ram as i had put 2x2gb instead of the original 1x1gb si i replaced the original one and it turned on. So to make sure it was the ram i re-inserted the 2gb but it wouldn't turn on and to my great disappointment it wouldn't turn on when i re-inserted the 1gb original ram either... Bit lost. Not sure if it has to do with temperature issues?
Please help!!!!Sounds like either an unseated or bad Ram module.
Try pushing real hard on each module with both thumbs to insure that they are firmly seated in the slots. -
I have a iPhone 4 and lately it has been shutting down randomly when I still have battery left. It also doesn't turn back on, until I plug it in to the charger. But when I plug it in, the low battery sign shows up then comes to the lock screen with like 68% left.
Morning Clementine Lin,
For more information this, please see this article:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Take a look at the Will not turn on, will not turn on unless connected to power, or unexpected power off section.
Have a nice day,
Mario -
Since downloading OS X Mavericks, my computer has been shutting down midway of starting up. Please help! The problem began after downloading the software free update. Now when I start my computer, it will starts up normal but when the desktop appears, there will be an error message that I shut down my computer because of an error and if I would like to open the applications that were open before the sudden shut down I should press continue. Then when I select continue, it will open up another communication window that my computer is restarting because of an error. Then the screen will revert to shutting down and restarting again. This has been going on now all morning. Can someone hlep me on how to resolve this issue?
Very Important, how much Free Space is on your Hard Drive first of all? Click on the Macintosh HD on the Desktop, then do a Get Info on it.
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
Do they launch OK while in Safe Mode? -
my iPhone 4 has just shut down. Rang the phone then vibrated for 2 minutes bank screen, will not turn on, also tried charging and will not charge. Any suggestions? I did download a ringtone app and went on to iTunes to sync!.
Try charging the iPhone via a wall socket for at least 30 minutes then try a reset by pressing and holding the sleep/wake button and the home button for 20 seconds (maybe longer) until the Apple logo appears, ignore the red slider. Then turn back on. You won't lose any data doing the reset.
-
MacBook Pro 15" won't turn on after a shut down.
My MacBook Pro 15" late 2008 mavericks won't turn on after a shut down. Tried SMC reset, plugged and unplugged charger multiple times as well as installing the battery. It has started that after a while I have replaced my old battery with a new one,upgraded to Mavericks and increased my memory to 4GB. In the beginning after I would install every time the battery ,it' would turn on after 8-10 tries. Today it's completely unresponsive . Tested different outlets, with and without battery,nothing worked. I also heard that some other people have this issue once they have updated their operating system from 10.5.8 to Mavericks. Is that the problem.? Has anyone found a solution to this?
Hi there Olgabinou,
You may find the troubleshooting steps in the article below helpful.
Troubleshooting: My computer won't turn on
http://support.apple.com/kb/ts1367
-Griff W. -
Macbook Pro has been shutting down unexpectedly
My MacBook Pro (retina 15 inch) OS X Yosemite, which had been very stable since purchased in late 2013 has been shutting down unexpectedly in recent weeks. Sometimes it's caused by Excel or Quicken, other times, it's a mystery. And the whole computer crashes, not just a program. What could be causing this recent behavior?
I found the records using the info on the link you provided. I have had five kernel panics in the last month. Do you want me to post them all here? I've copied yesterday's below:
Anonymous UUID: E22A1CED-5B00-740B-B546-C447BC133AD1
Mon Feb 2 19:09:30 2015
*** Panic Report ***
panic(cpu 0 caller 0xffffff7f9dd2894e): "sfree on invalid allocation at 0xffffff802ff02738"@/SourceCache/Sandbox_executables/Sandbox-358.1.1/src/kext/s malloc.c:224
Backtrace (CPU 0), Frame : Return Address
0xffffff80ff66b540 : 0xffffff801cf2fe41
0xffffff80ff66b5c0 : 0xffffff7f9dd2894e
0xffffff80ff66b5f0 : 0xffffff7f9dd1b0c6
0xffffff80ff66b610 : 0xffffff7f9dd2909b
0xffffff80ff66b630 : 0xffffff7f9dd20ae4
0xffffff80ff66b670 : 0xffffff7f9dd1ffb6
0xffffff80ff66b6a0 : 0xffffff801d52f744
0xffffff80ff66b6c0 : 0xffffff801d3a3add
0xffffff80ff66b6e0 : 0xffffff801d12f482
0xffffff80ff66b730 : 0xffffff801d14ab56
0xffffff80ff66bb50 : 0xffffff801d39fc12
0xffffff80ff66bbb0 : 0xffffff801d164f17
0xffffff80ff66bc00 : 0xffffff801d15d143
0xffffff80ff66bf20 : 0xffffff801d1523fa
0xffffff80ff66bf50 : 0xffffff801d44b386
0xffffff80ff66bfb0 : 0xffffff801d036e86
Kernel Extensions in backtrace:
com.apple.kext.AppleMatch(1.0d1)[37AE7F31-8D85-37FE-AA63-2070F6FE115C]@0xffffff 7f9dd1a000->0xffffff7f9dd1efff
com.apple.security.sandbox(300.0)[0DA39A0A-5AF4-3696-B397-8FA104465BC4]@0xfffff f7f9dd1f000->0xffffff7f9dd35fff
dependency: com.apple.driver.AppleMobileFileIntegrity(1.0.5)[B28E0B3E-38DF-380A-94C5-8FE108 57152B]@0xffffff7f9dd0d000
dependency: com.apple.kext.AppleMatch(1.0.0d1)[37AE7F31-8D85-37FE-AA63-2070F6FE115C]@0xffff ff7f9dd1a000
BSD process name corresponding to current thread: SymDaemon
Mac OS version:
14C109
Kernel version:
Darwin Kernel Version 14.1.0: Mon Dec 22 23:10:38 PST 2014; root:xnu-2782.10.72~2/RELEASE_X86_64
Kernel UUID: DCF5C2D5-16AE-37F5-B2BE-ED127048DFF5
Kernel slide: 0x000000001cc00000
Kernel text base: 0xffffff801ce00000
__HIB text base: 0xffffff801cd00000
System model name: MacBookPro11,2 (Mac-3CBD00234E554E41)
System uptime in nanoseconds: 36144377451197
last loaded kext at 40027937608: com.symantec.kext.SymAPComm 12.7.1f4 (addr 0xffffff7f9d6a8000, size 20480)
last unloaded kext at 192241439443: com.apple.driver.AppleFileSystemDriver 3.0.1 (addr 0xffffff7f9f45a000, size 8192)
loaded kexts:
com.symantec.kext.SymAPComm 12.7.1f4
com.Logitech.Unifying.HID Driver 1.3.1
com.Logitech.Control Center.HID Driver 3.9.1
com.symantec.kext.ips 3.9.2f1
com.symantec.kext.internetSecurity 5.4f4
com.apple.driver.AudioAUUC 1.70
com.apple.filesystems.autofs 3.0
com.apple.driver.AGPM 100.15.5
com.apple.driver.ApplePlatformEnabler 2.1.7d1
com.apple.driver.X86PlatformShim 1.0.0
com.apple.driver.AppleOSXWatchdog 1
com.apple.driver.AppleGraphicsDevicePolicy 3.7.7
com.apple.driver.AppleUpstreamUserClient 3.6.1
com.apple.iokit.IOBluetoothSerialManager 4.3.2f6
com.apple.iokit.IOUserEthernet 1.0.1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHDA 269.25
com.apple.driver.AppleIntelHD5000Graphics 10.0.2
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleThunderboltIP 2.0.2
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.3.2f6
com.apple.driver.AppleHV 1
com.apple.driver.AppleLPC 1.7.3
com.apple.driver.AppleCameraInterface 5.29.0
com.apple.driver.AppleSMCLMU 2.0.7d0
com.apple.driver.AppleIntelFramebufferAzul 10.0.2
com.apple.driver.AppleBacklight 170.5.0
com.apple.driver.AppleMCCSControl 1.2.11
com.apple.driver.AppleUSBTCButtons 240.2
com.apple.driver.AppleUSBTCKeyboard 240.2
com.apple.driver.AppleUSBCardReader 3.5.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.driver.AppleUSBHub 705.4.2
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.7.0
com.apple.driver.AppleAHCIPort 3.1.0
com.apple.driver.AppleFWOHCI 5.5.2
com.apple.driver.AirPort.Brcm4360 910.26.12
com.apple.driver.AppleUSBXHCI 710.4.11
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleACPIButtons 3.1
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 3.1
com.apple.driver.AppleAPIC 1.7
com.apple.nke.applicationfirewall 161
com.apple.security.quarantine 3
com.apple.security.TMSafetyNet 8
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 11
com.apple.driver.DspFuncLib 269.25
com.apple.kext.OSvKernDSPLib 1.15
com.apple.iokit.IOSurface 97
com.apple.iokit.IOFireWireIP 2.2.6
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.3.2f6
com.apple.driver.X86PlatformPlugin 1.0.0
com.apple.driver.AppleGraphicsControl 3.8.6
com.apple.driver.IOPlatformPluginFamily 5.8.1d38
com.apple.driver.AppleSMC 3.1.9
com.apple.AppleGraphicsDeviceControl 3.8.6
com.apple.iokit.IOAcceleratorFamily2 156.6
com.apple.iokit.IOUSBUserClient 705.4.0
com.apple.driver.AppleHDAController 269.25
com.apple.iokit.IOHDAFamily 269.25
com.apple.iokit.IOAudioFamily 203.3
com.apple.vecLib.kext 1.2.0
com.apple.driver.AppleBacklightExpert 1.1.0
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.driver.AppleSMBusController 1.0.13d1
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.iokit.IOFireWireSerialBusProtocolTransport 2.5.1
com.apple.iokit.IOFireWireSBP2 4.2.5
com.apple.driver.AppleUSBMultitouch 245.2
com.apple.iokit.IOSCSIBlockCommandsDevice 3.7.3
com.apple.iokit.IOUSBMassStorageClass 3.7.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.3
com.apple.driver.AppleUSBMergeNub 705.4.0
com.apple.driver.IOBluetoothHIDDriver 4.3.2f6
com.apple.iokit.IOBluetoothFamily 4.3.2f6
com.apple.iokit.IOUSBHIDDriver 705.4.0
com.apple.driver.AppleUSBComposite 705.4.9
com.apple.driver.AppleThunderboltDPInAdapter 4.0.6
com.apple.driver.AppleThunderboltDPAdapterFamily 4.0.6
com.apple.driver.AppleThunderboltPCIUpAdapter 2.0.2
com.apple.driver.AppleThunderboltPCIDownAdapter 2.0.2
com.apple.driver.CoreStorage 471.10.6
com.apple.iokit.IOAHCIFamily 2.7.5
com.apple.iokit.IOFireWireFamily 4.5.6
com.apple.driver.AppleThunderboltNHI 3.1.7
com.apple.iokit.IOThunderboltFamily 4.2.1
com.apple.iokit.IO80211Family 710.55
com.apple.driver.mDNSOffloadUserClient 1.0.1b8
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOUSBFamily 710.4.14
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 300.0
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.AppleKeyStore 2
com.apple.driver.AppleMobileFileIntegrity 1.0.5
com.apple.driver.AppleCredentialManager 1.0
com.apple.driver.DiskImages 396
com.apple.iokit.IOStorageFamily 2.0
com.apple.iokit.IOReportFamily 31
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 3.1
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.Libm 1
com.apple.kec.pthread 1
com.apple.kec.corecrypto 1.0
System Profile:
Thunderbolt Device: Thunderbolt to FireWire Adapter, Apple Inc., 1, 5.6
Bluetooth: Version 4.3.2f6 15235, 3 services, 27 devices, 1 incoming serial ports
Model: MacBookPro11,2, BootROM MBP112.0138.B14, 4 processors, Intel Core i7, 2 GHz, 8 GB, SMC 2.18f15
Thunderbolt Bus: MacBook Pro, Apple Inc., 17.1
Graphics: Intel Iris Pro, Intel Iris Pro, Built-In
USB Device: Internal Memory Card Reader
USB Device: BRCM20702 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Apple Internal Keyboard / Trackpad
USB Device: USB Receiver
USB Device: Composite Device
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1600 MHz, 0x02FE, -
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1600 MHz, 0x02FE, -
FireWire Device: GoFlex Pro Mac, Seagate, Up to 800 Mb/sec
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x134), Broadcom BCM43xx 1.0 (7.15.159.13.12)
Network Service: Wi-Fi, AirPort, en0
PCI Card: pci11c1,5901, IEEE 1394 Open HCI, Thunderbolt@195,0,0
Serial ATA Device: APPLE SSD SM0256F, 251 GB -
My phone has been shutting down by itself. Why is it doing that?
My Iphone has been shutting down by itself and its not keeping a charge either i use to keep battery life until at least the end of the day, thatas even when I close out my apps. Even Siri start talking on its own. Whats the reason for all this?
The iPhone can shut down by itself when the battery is too low. Don't know if you have a malfunction that is running continuously and as such draining the battery ...or if you just have a warn out battery.
-
HT4623 My iPhone 4 freezes and has now shut down since doing the update this past Saturday.
My iPhone 4 freezes and has now shut down since doing the update this past Saturday.
Hi candybooist,
Thanks for using Apple Support Communities. This article has steps you can take if your iPhone is unexpectedly powering off:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Cheers,
- Ari -
I've updated my Ipad to IOS 7,0, the problem I'm is the Ipad has been updating Icloud settings for the past two days and it's not allowing me to do anything else. How do I cancel the Icloud update?......HELP
Try a Reset...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
If no joy...
Connect to iTunes on the computer you usually Sync with and Restore
http://support.apple.com/kb/HT1414
Make sure you have the Latest Version of iTunes Installed on your computer ( v 11.1)
iTunes free download from www.itunes.com/download -
I don't have a clue what I am doing with this. Here is my discussion with Customer Service:
Naresh: Hello! Welcome to Adobe Customer Service.
Naresh: Hi Mary.
Naresh: I understand you have been getting invalid serial number, am I right?
Mary Vance: Hi
Mary Vance: yes
Naresh: Please provide me with the serial number, Mary.
Mary Vance: I provided my serial number here
Naresh: Thank you for the serial number.
Naresh: Please allow me 2-3 minutes while I check your serial number.
Mary Vance: no problem
Naresh: Thank you.
Naresh: Thank you for being online.
Naresh: I would like to inform you that the server for CS2 products have been shut down by adobe since then you are not able to install the product.
Naresh: However, I will provide you the link to download CS2 application. Please visit the following link.
Mary Vance: will this allow me to reinstall Photoshop?
Naresh: Yes, Mary.
Mary Vance: ok...what is that link?
Naresh: Please clcik here to download.
Mary Vance: thank you....trying it now
Naresh: You are welcome.
Naresh: I will also provide you the link for further information regarding the installation of CS2 products.
Mary Vance: the download doesn't have anything regarding installation
Naresh: Please click for the information.
Naresh: I am sorry for providing wrong link.
Naresh: Please click here to download.
Naresh: The 3rd link is for the download of CS2 Photoshop.
Naresh: Were you able to view the download link, Mary?
Mary Vance: what file in that download is supposed to help me?
Mary Vance: the first and 3rd link were the same
Mary Vance: when trying to load from my software, I get the message saying my serial number is not valid. All I need is a serial number that works. Is that going to be possible?
Naresh: Mary, Adobe has disabled the activation server for CS2 applications, including Acrobat 7 and Audition 3, because of a technical issue.
Naresh: So you will have to download the software from the above link.
Naresh: May I know in what OS you are trying to install the software?
Mary Vance: the link sends me to a CS2 help package
Mary Vance: windows 7
Naresh: I am sorry you will not be able to install the CS2 application on Windows 7 since it does not support CS2 version.
Mary Vance: I have had on here for a few years...why all of a sudden would it not work? Illustrator is fine.
Naresh: Okay.
Naresh: You can try downloading the software.
Mary Vance: was the original link that you sent me suppose to allow me to download Photoshop?
Mary Vance: I did try and got the message that the serial number is invalid. Is there any way to get around this or should I throw it away?
Naresh: May I know whether you uninstalled the product.
Naresh: ?
Mary Vance: I did uninstall Photoshop only. Then I tried reinstalling Photoshop only and got the message about the serial number.
Naresh: I check and see that it seems to be a technical issue, I request you to please post your query to the forums so that you will get the resolution from our expertise and I'll provide you the link to visit the forums.
Naresh: Please click here to visit the forums.
Mary Vance: I guess I will try that.
Naresh: Yes, please.
Naresh: Is there anything else I can help you with?
Mary Vance: I don't see where you helped me with this yet, so I guess not!
Naresh: I am sorry for the inconvenience.
Naresh: Thank you for contacting Adobe. We are available 7 days a week, 24 hours a day. Goodbye!
Any help would be appreciated.CS2 is very old and reached its "end of life" a while back. So probably won't run on modern operating systems. If you can still run it, you'll need to uninstall what you have and re-install with the download link below to activate it.
Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3
Nancy O. -
Media keys won't turn off when computer shuts down
I've been experiencing a problem with the media keys on my P305-S8834 laptop running vista 64. The computer will shut down completely, but the media key lights remain on. They will go off when I start and shut down the computer a couple of times. This problem is recent. Up to about two weeks ago the shutdown was normal. Appreciate any help with this.
Solved!
Go to Solution.Satellite P305D-S8834
Media key problems like that are sometimes solved by resetting the motherboard.
With the battery and AC adapter removed, close the Power switch for 30 seconds.
Re-attach those, press the Power button to turn the computer on, and then immediately press the F2 key while the Toshiba logo is displayed. Press F9 to restore the BIOS default settings, press F10, and then select Yes (Exit Saving Changes). The computer will restart.
-Jerry -
I have an IMac and I tried to get on it this morning, but it wouldn't start when I touched the mouse pad. I tried this a couple more times, and then I tried it with the keyboard. I got the same results. I know there are fresh batteries in there so I didn't see what the problem was, so I tried turning it on, and I got no reaction. My IMac is plugged in and everything so what's the problem?
Make sure the outlet is OK. could have tripped circuit breaker.
Then try resetting the SMC
Resetting the SMC for Mac Pro, Intel-based iMac, Intel-based Mac mini, or Intel-based Xserve
Shut down the computer.
Unplug the computer's power cord.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on the computer.
If it still fails to turn on you need to make a Genisu Bar appointment at an Apple Store or contact Apple Support.
Maybe you are looking for
-
Task-flow for inserting record in a popup
Hi all, I am using Jdeveloper 11.1.1.0. I have a page with a lot of panelTabbed that displays a lot of data of a table. I would like to have a button that show a popup and launch a task-flow for inserting data in the table in more steps. I have creat
-
Sending Command Line Arguments to Jar Executable
Hi All I wish to send Command Line Arguments to Jar Executable. i.e. before I Jar'd my program, I would do the following public class CmdLnArgmntExp { public static void main(String[] args) { System.out.println("d"); for (int i = 0; i < args.length;
-
ACR 5.5 vs ACR 6.3 LAB values differ!
Hi, My work requires me to run sampling of LAB values on images. I used to work on CS4 ACR 5.5 and now CS5.1 ACR 6.3. However, i realize the same RAW image with the exact same setting .XMP was appearing different in both platform! ie. the LAB values
-
I found there are tools to compile .net applications to SWF movies that can be run by Flash. Are there any similar tools for Java, which can compile Java programs into SWF files? Looking for a way to write my Flash movies using Java... Thanks :)
-
I purchased music on my iPad. That music is not on my iMac.
When I go to the iTunes Store on my iMac the album is listed as purchased. When I do a search for available downloads, my iMac tells me all songs for that id have been downloaded.