Imac wont recognize printers

ever since i installed lion my mac wont recognize my epson printer or my hp printer. no printing from ipad either.

You probably won't get any help unless you are more descriptive. At a bare minimum we need to know what version of Lion is installed on the iMac (10.7.2 is current), exactly what printers you have and exactly how they are connected to your computer. Also please check http://support.apple.com/kb/HT3669 to see if your model printers are supported. The first thing I'd do though is System Preference - Print & Scan - highlight the first printer in the box on the left and right click it and choose Reset Printing System. It will look similar to:

Similar Messages

My Imac wont recognize my log in password

Hello?
I own an Imac with Leopard 10.5 (NOT Snow Leopard)...
Yesterday - I re-installed the 2 disks to try to clean up a bit the system...
(I've own the computer for 3 or 4 years, and I think it kinda needed it...)
It installed (took 2 hours) and all seemed well until - I went to log in...
I put in my pw (same pw since I bought the Imac) and it wont recognize it???
It wont recognize the master pw either...
What can I do - I live very far (200km) from an Apple store...
I will give all the points and stars to anyone who can help!!
I have a huge assignment to start this week...
Chilly

If you think it is "root" then the fllowing tells you how to enable/disable root user using your admin password:
Enabling and using the "root" user in Mac OS X
And you can also change the root password from terminal using:
sudo passwd root
Answer the prompt for your admin passoword (it won't be echoed) and then the other prompts.

Migration Assistant adn iMac wont recognize Target Disk Mode of iBook

Friend purchased a new iMac 20in and went to use Migration Assistnat to transfer from older iBook. Will call this iBook1
Following directions, he hooked up Firewire cable, rebooted iBook1 into Targe Disk Mode (TDM). New iMac would NOT recognize existance of TDM iBook1. So we began the following sequence of tests to isolate the problem.
1) Using a second iBook2, hooked up original iBook1 in TDM to iBook2. The HD of iBook1 showed up on the desktop of iBook2 as it should, along with all the files inside of it. This verified that the cable was good and that the firewire port on the iBook1 was working as well as TDM on iBook1.
2) We rebooted the iMac, restarted the Migration assitant and placed the iBook2 into TDM and connected them. Migration assistant worked, recognizing the iBook2 as it should. This verified that the iMAc firewire port and Migration assistant was again working fine. We also rebooted the iMac and hooked up the iBook2 in TDM w/o Migration assistant, and again it worked fine.
3) We then tried to connect the iBook1 via TDM to the iMac w/o migration assistant. Again NO RESULT.
No matter what we did, we could NOT get the new iMac to recognize the older iBook1 via firewire TDM. All other connections betwen the computers worked fine. All systems were running 10.4.10. We reset the PRAM, we fixed permisions, still the new iMac would not recognize the iBook1 in TDM.
Any ideas?

I'm having the same problem connecting my iBook G3 500 in Target Disk Mode to my new iMac, the icon does not show up on the iMac. I have tested the Firewire on both computers with a FW XHD and they work fine. I took the iBook in to work and connected it to an eMac and a ProBook Intel with no problems. Back home tonight and it still fails to show the icon of the iBook in TDM on the desktop of the new iMac. Suggestions on a fix ? Thank you.

My imac wont recognize my input in the system preferences

so, im on an older imac (the one with the big round base, a chrome arm holding up a flat screen) and im trying to hook my guitar into the line-in jack next to the headphone jack. i go to "system preferences" and click the "sound" tab, then click the "input" tab. it only gives me the option for the built-in mircophone, i dosent even recognize that i have a line in plugged in. the wire is in perfect condition, so there is no chance that the wire is faulty. i have tryed it with the 1/4 end of the cable plugged into my guitar, and with out, and ive tryed starting my computer with it already plugged in, and i tryed it while the computer was already running. ive recording many songs on my X-girlfrinds MacBook Pro with no isses...same guitar. same wire, and it worked great.
how can i get the "system preferences to recognize that my guitar is plugged in?!?!?
thank you!!!!
PS this computer was a hand-me-down from my dad, i have no clue what version of garageband i have (not that i think that would matter in this situation) and i do not know what was the last operating system update that this computer recieved

I believe that icloud requires OS 10.7, your post indicates that you have 10.6.8.

Imac wont recognize my camcorder

I just purchased a cable for my iMac to connect to my tape camcorder. When I plug it in it doesn't recognize the camcorder but goes to iSight when I select import from Camera.

It would be quite useful to know what camera it is!

Imac wont recognize video camera through fire wire

Hey, iv got gotten a new iMac with Lion on it and my video tape camera (Canon ZR960) isnt recognized by my imac, i plug it in through firewire 800 and nothing happes? This is the only camera i have the caputres from tape and i have recently recorded a project and need it captured to Final Cut Pro X but either way no matter what i do i cannot get the computer to see it.

I don't have FCP X, but from what I know from FCE sand iMovie, those programs all have specific instructions on how to import footage. This is from your user manual (available from the Help menu or online where I found it):
It covers all sorts of options including tape based devices.

2007 imac wont recognize new ram

installed 2gb centon ddr2-667 memory in empty slot, supposed to be mac ready but computer does not change still says slot is empty? any suggestions?

Correct and reliable Mac RAM can be purchased from online Mac RAM sources Crucial memory or OWC (macsales.com).
If you purchased RAM from any local computer or any electronics retailer, you bought incompatible and wrong RAM!
Return the RAM and get a full refund.
There are NO local electronics retailers that carry the proper Mac RAM.
Reliable and correct Mac RAM can only be purchased online.
FYI, your iMac can take a total of 6 GBs of RAM.
Can only be purchased from OWC ( macsales.com).
http://eshop.macsales.com/shop/apple/memory/iMac/Intel_Core_2_Duo
Good Luck!

Imac wont recognize current location

Just moved to Europe from California (cupertino) and my imac (core i7 latest model) will show as being in Cupertino when I select "Set time zone automatically using current location" in System Preferences. Tried most obvious fixes, to no avail. Any idea ?

Set both Date &Time and the Timezone in Preferences.
You might have to set manually until server cache refresh.

USB wont recognize external drive

I see that there have been a lot of problems with the usb ports recognizing external hard drives. Some of the fixes are so confusing, I cant even follow them! Does anyone have an easy fix for this problem or do you think apple care will know? i have used this drive for about a6 months with no problem, and then all of a sudden my Imac wont recognize the drive.

HI
You should check in System Profiler, under the USB section to see if the drive appears there (Apple -> About This Mac -> More Info -> USB)
Also, try resetting the SMC & PRAM to see if that helps

HT1349 Just popped a cd into my IMac (10.68) in order to look at some very important images I just had scanned. The computer wont recognize the cd, nor will it eject it. any suggestions? (besides shaking it and throwing it across the room :-)

Just popped a cd with important images into my imac. Computer wont recognize it nor will it eject it.
any suggestions?

Restart the computer with the mouse button held down. This will force an optical drive eject.

My iMac 400 DV wont recognize a DVD

I recently got a iMac 400 DV (slot-loading). It has a DVD/CD combo. For some reason the mac recognizes a CD but wont recognize a DVD. I am using Panther 10.3.9. Any suggestions? Everytime I insert a DVD (original movie) it spins for a while (20 seconds) than spits it out.

The 1990/2000 iMac DV 400MHz came with a DVD-ROM drive (not a 'Combo' drive - a 'Combo' drive is DVD-ROM and CD-RW). The 2001 iMac 400MHz came with a CD-ROM drive only.
I suggest you obtain a cleaning disc and try cleaning the drive.
regards
mrtotes

ITunes wont recognize blank CDs

I am all up to date on my updates for both iTunes and my macbook and for some reason when I try to burn a CD through iTunes it wont recognize the blank disc. I have burned discs through iTunes before and have used these particular blank CDs as well. Also when i insert an audio CD it recognizes it just fine. Weird. Any help would be greatly appreciated. Thanks!

I am having the same problems when trying to burn or play burned CDs through iTunes. Even when it looks as though it successfully burned a disc through iTunes, when I attempt to play a burned disc, the disc drive ejects the CD without explanation. And, that's only after it appears to successfully completed the burn process and preceded by anywhere from 3-10 failed burn attempts because it ejects every blank disc while iTunes gets hung up on it's original message "Please insert blank CD" twice and then quits the burn process requiring you to start over with the 3rd, 5th, etc. blank discs. This is the most recent problem in a long line of issues I've experienced with my iMac, which is only 6 months old and I will never purchase a Mac again. Every previous problem since purchasing my iMac posted as a question went without any answer or assistance from Apple and I'm gobsmacked by the lack of service or support.
Message was edited by: neofight77

Wont recognize GL2

Ok so my imac broke and I got a new one and ever since then, I cannot upload from my GL2 into FCE. I use the DV NTSC Firewire basic like usual and still wont even let me capture anything. This is getting very frustrating and I have even tried capturing from my mom's sony dv camera and it wont recognize that either. I have tried that camera on multipe capture settings with no success. Someone help me please!!!

Hi
Most of it in this list apply to FC too.
*NO CAMERA or A/D-box*
Cable
• Sure that You use the FireWire - USB will not work for miniDV tape Cameras
FireWire - Sure not using the accompany USB-Cable but bought a 4-pin to 6-pin FW one ?
• Test another FW-Cable very often the problem maker.
Camera
• Test Your Camera on another Mac so that DV-in still works OK
• Toogle in iMovie pref. Play-back via Camera (on<->off some times)
• Some Cameras has a Menu where You must select DV-out to get it to work
• Camera connected to "charger" (mains adaptor) - not just on battery
Does Your Camera work on another Mac ?
Sorry to say it is to easy to turn the 6-pin end of the FW-cable 180 deg wrong.
This is lethal to the A/D-chip in the Camera = needs an expensive repair.
(Hard to find out - else than import/export to another Mac ceased to work
everything else is OK eg recording and playback to TV)
Connections
• Daisy Chaining most often doesn’t work (some unique cases - it’s the only way that work (some Canon Cameras ?))
Try to avoid connecting Camera <--> external HD <--> Mac but import directly to the Mac then move
the Movie project to dedicated external hard disk.
• FireWire-port - Can be re-setted by - Turn off Mac and disconnecting Mac from Mains/Power for 20-30 minutes
Mac
• Free space on internal (start-up) hard disk ? Please specify the amount of free space.
(Other hard disks don't count)
I go for a minmum of 25Gb free space for 4x3 SD Video - and my guess is 5 times more for 16x9 HD ones
after material is imported and edited.
SoftWare
• Delete iMovie pref file may help sometimes. I rather start a new account, log into this and have a re-try.
• Any strange Plug-ins into QuickTime as Perian etc ? Remove and try again.
• FileVault is off ? (hopefully)
Using WHAT versions ? .
• Mac OS - X.5.4 ?
• QuickTime version ? (This is the heart in both iMovie and FinalCut)
• iMovie 8 (7.1.?) ?
• iMovie HD 6 (6.0.4/3) ?
*Other ways to import Your miniDV tape*
• Use another Camera. There where tape play-back stations from SONY
but they costed about 2-4 times a normal miniDV Camera.
• If Your Camera works on another Mac. Make an iMovie movie project here and move it
over to Your Mac via an external hard disk.
(HAS TO BE Mac OS Extended formatted - USB/DOS/FAT32/Mac OS Exchange WILL NOT DO)
(Should be a FireWire one - USB/USB2 performs badly)
from LKN 1935.
Hi Bengt W, I tried it all, but nothing worked. Your answer has been helpfull insofar as all the different trials led to the conclusion that there was something wrong with my iMovie software. I therefore threw everything away and reinstalled iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos) to my Sony camcorders worked properly as it did before. Thank you. LKN 1935
from Karsten.
in addition to Bengt's excellent '9 yards of advice' ..
camera set to 'Play' , not rec/computer/etc.?
camera not on battery, but power-line?
did your Mac 'recognize' this camera before...?
a technical check.
connect camera, on, playback, fw-connected...
click on the Blue Apple, upper left of your screen ..
choose 'About../More..
under Firewire.. what do you read..?
More
• FileVault - Secure that it’s turned off
• Network storage - DOESN’T WORK
• Where did You store/capture/import Your project ?
External USB hard disk = Bad Choise / FireWire = Good
If so it has to be Mac OS Extended formatted
----> UNIX/DOS/FAT32/Mac OS Exchange is NOT Working for VIDEO !
mbolander
Thanks for all your suggestions. What I learned is that I had a software problem. I had something called "Nikon Transfer" on my Mac that was recognizing my Canon camcorder as a still camera and was preventing iMovie from working properly. After uninstalling Nikon Transfer and doing a reboot, everything worked great.
I never liked the Nikon Transfer software anyway--I guess I'll get a cheap card reader and use that to transfer photos in the future.
*No Camera or bad import*
• USB hard disk
• Network storage
• File Vault is on
jiggaman15dg wrote
if you have adobe cs3 or 4 and have the adobe bridge on close that
or no firewire will work
see if that halps
DJ1249 wrote
The problem was the external backup hard drive that is connected, you need to disconect the external drive before the mac can see the video camera.
Yours Bengt W

Classic wont recognize new printer.

My boss just got a new printer - which can only be installed in OS X 10.2 or higher. Now - she has a program that only runs in Classic - OS 9 - and she needs to print, but Classic wont recognize the new printer.
I've found the article on how to share printers between the two - will that fix it - or do you need installation software for OS 9 as well - in which case the new printer can't be used to print from the older program.
Thanks,
-Brad
Ps. - The details below are my bosses details.

Hello brad,
It would help if you list the model and make of the printer. I am new to X but have been reading that there are often work arounds for this type of situation. There may be an alternate driver. I have just started to read about "GIMP" printing which i think is like generic driver for many printers.
Start with the make and model and I feel confident others will offer more help. It is quite possible that there may be a workable solution........Jim

Imac wont boot - i get a white screen with apple logo, and it loads to about 10%, then screen goes black

imac wont boot - i get a white screen with apple logo, and it loads to about 10%, then screen goes black

Hey there mtriest,
It sounds like you are unable to boot the iMac successfully as it keeps shutting down when you try to boot. I suggest the troubleshooting from the following article named:
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/ts2570
Disconnect, test peripheral devices and network cables
Note: "Peripheral devices" refers to external devices other than what came with your Mac, such as hard drives, printers, or hubs that you connect via a USB or FireWire cable.
Shut down your Mac. If necessary, hold your Mac's power button for several seconds to force it to power down.
Disconnect all peripheral devices such as external hard drives or printers (leave only the display, a keyboard, and mouse connected).
Disconnect any Ethernet cables.
Start up your Mac.
If you can start up this way, one or more of your peripheral devices (or installed software related to the device) is probably causing the gray screen issue. Connect one device, then restart your Mac to test for the issue. Repeat the process until you locate the device at issue. Make sure the device is powered if it needs to be to operate correctly. Check with the manufacturer of the device for support or possible software driver or firmware updates that may be available for the device. Try a different cable with the device if possible (such as a different USB or FireWire cable).
Note: If you have multiple peripheral devices and the issue only occurs when they are all connected, but not when each device is the only peripheral connected, see the Additional Information section below.
If you are using a desktop Mac with a third-party keyboard and/or mouse device, and the issue still occurs, try starting up with an Apple keyboard and mouse connected instead. Try starting with no keyboard and mouse connected, then connect them after start up. Also, try a different USB port on your Mac.
If the gray screen issue persists with no devices connected, go to the next section (with the peripherals still disconnected).
Perform a Safe BootSimply performing a Safe Boot may resolve this issue.
Shut down your Mac. If necessary, hold your Mac's power button for several seconds to force it to power down.
Start your Mac, then immediately hold the Shift key. This performs a Safe Boot. Advanced tip: If you want to see the status of a Safe Boot as it progresses, you can hold Shift-Command-V during start up (instead of just Shift).
Note: A Safe Boot takes longer than a typical start up because it includes a disk check and other operations.
If your Mac starts up as expected, immediately try restarting.
If the Safe Boot does not work, or the restart after a successful Safe Boot does not work, go to the next section.
There is additional information in the article with further troubleshooting if needed.
Thank you for using Apple Support Communities.
Cheers,
Sterling

Imac wont recognize printers

Similar Messages

Maybe you are looking for