IMac wont' wake from sleep (wired keyboard)

I see a couple threads on this here, but they seem to be associated with bluetooth keyboards.
I have a new 27" iMac Core i5 (about 2 months old) and a new problem started this past week. When the computer display goes to sleep, I cannot wake it up. The only way I have found to wake it up is by tapping the power button to force a full hard drive sleep and then clicking the mouse. This is also time consuming (it takes a minute to wake up).
Yes, I have the setting for the hard drive to go to sleep on. But I can hear the computer working when I am trying to wake it up. I can play music by hitting the space bar on my keyboard - but the display will not awaken.
Any help would be greatly appreciate.

Hi Michael
Reset the SMC > http://support.apple.com/kb/HT3964
+1. Shut down the computer.+
+2. Unplug the computer's power cord.+
+3. Press and hold the power button for 5 seconds.+
+4. Release the power button.+
+5. Attach the computers power cable.+
+6. Press the power button to turn on the computer.+
and then test to see if it is working as expected?
If not, then check and try the following:
1. A tap on the keyboard should wake the display, is the keyboard plugged into a port on the back of the iMac or into a Hub?
2. Your profile shows that you are running 10.6.2? Either way if the computer is or is not up to date download and install the 10.6.6 Combo Update. > http://support.apple.com/kb/DL1349
3. Then run a Software Update.. to make sure that iTunes, Safari, Java and your Printer are up to date.
Dennis

Similar Messages

  • Macbook Pro wont wake from sleep

    My '08 MacBk Pro wont wake from sleep. This has happened several times since I installed Lion. In the past I have simply clicked several times on the trackpad until it woke, but on several occasions it actually shut down after entering sleep mode, (It went to black screen, the little pulsing sleep light was dark and I got no responce to clicks on trackpad or keyboard). When this happens I can usually re-start the Mac with a hard re-boot to resolve the issue. This time however, I can't get the computer to turn on. I've tried pressing the power button once, and all that happens is that the sleep light blinks once along with a the normal whiring sound you hear when the computer is ramping up, but this lasts only a second and then it goes back to black screen/dead Mac. I also tried holding down the power button as I would for a hard reset at which point I get several blinks from the pulsing sleep light and then nothing. I also tried unplugging the cable, removing the battery and pressing the power button for 5 seconds, then reconnecting battery and cable and pressing the power button, (I got these steps from an article posted here on the furums). BTW, I have disconnected all external drives, etc. before trying any of these steps. Please let me know if there's something else I might try to revive my Mac.

    Follow up: I took the MacBook Pro for repair and the tech found that the logic board was damaged - probably due to so many hard resets I had to perform to get the machine to load when starting it up after shutdown or restart. I replaced the logic board, (Very expensive) and its been running fine for 3 days. However, the freezing problem has just started again and I'm worried that having to perform a hard reset to get the macbook to load will cause more damage.
    The problem that's occuring is as follows: When I start the computer up after shutdown, or sometimes after restart, the desktop fails to load and the spinning color wheel appears. I can see the dock and the main upper toolbar but my desktop is blank and my external hard drives do not load. I can't make any selections with the cursor because of the eternally spinning color wheel, so my only option is to perform a hard reset by depressing the power button until the unit shuts down. When I start it up again the system loads correctly. I have tried ejecting my external drives before shutting down, but this doesn't make a difference. This problem started when I installed Lion OS and got continually worse until the computer finally shut down for good and I had to replace the logic board. Now it's starting to happen again.
    Has anyone else experienced this problem running Lion on a MacBook Pro early '08? If so, please help me find a solution for the freezes. 

  • 27" iMac only wakes from sleep on second attempt

    My 27" iMac, as the title suggest only wakes from sleep on the second attempt. If I wake the mac in the usual way(magic mouse, keyboard or power button), I hear the hard drive start but the screen stays blank. If i then press the power button it will put the mac back into sleep then if i then wake it up again everything comes on fine. This only seems to happen if the mac has been sleeping for longer than a few minutes, but it does happen every single time.
    I've obviously checked that the bluetooth devices are allowed to wake the machine. Ive been looking through various forums and haven't come across anyone with the same problem as me so far.
    Ive already tried resetting the smc,pram etc to no avail.
    Any ideas on what could be the problem?
    Thanks
    Message was edited by: ScreamingMusings

    Sorry, I get it now.
    If you are using the Screen Saver prior to auto-sleep, then try disabling it to see if that helps.
    If not then the only other thing I can suggest is to backup and reinstall the OS X or call Apple Support.

  • OS X 10.7.3 WiFi Update for iMacs and Wake from Sleep Problem

    http://support.apple.com/kb/DL1501
    Apple has released a software update for those suffering from the iMac wake from sleep/wifi connection issue that resulted from updating to 10.7.3. It fixes the problem for me and several others. For those still suffering this issue, download it and see how it works!

    To answer my own question it seems a workaround is to wake the iMac up using the power button rather than the keyboard. The WiFi reconnects this way.

  • New macbook pro wont wake from sleep

    Hi everyone, I got the new macbook pro 15 inch with retina display about a month ago, the problem is it will not wake from when the screen goes to sleep, not all the time but enuff for me to want to throw it out the window, when it is in sleep mode i go to touch the touch pad then the keybord lights up like its about to work then dies and i end up tuning the computer off from the off button.
    I have been on the phone with apple for many hours and its doing my head in and losing my mind and they have done a re set, a re install and also after that didnt work we wiped the computer and downloaded the software directley from apple and started fresh again " AND STILL DOES NOT WAKE FROM SLEEP " i have taken it back to jb hifi where i got it from in Liverpool westfields and they said sorry we cant help you and apple are saying you have to take the computer to apple and leave it with them for a few weeks, very hard for me as i use the computer everyday to run my business and i feel ripped off big time they should replace it straight away.
    Has anyone had this problem before ? any ideas ? thank you very much for you time.  Dave

    Apple has replaced systems for others after several tries at repairs have failed.  Find an Apple Authorized Service Provider and take it in for service, as Apple support directed.  Apple would have replaced the system outright in the first 14 days of ownership. After that, you need to give them the opportunity to repair it under warranty. 
    Since you use it for business, have you asked if the Apple Authorized Service Provider can provide a loaner? Or considered renting one for the short period it would be repaired? Or talked to the Apple Authorized Service Provider about expediting repair?

  • Imac wont start from sleep

    My imac has recently decided not to restart from sleep - I am having to switch off power and restart. Normally it will restart when I left click the mouse, however, there is no light showing on the underside of the mouse - profiler states 91% and the keyboard 100%
    When running there appear to be no issues.
    Any thoughts please?
    3.06Ghz running 10.6.8
    8Gig Ram - showing in profiler.

    See KB Article:  http://support.apple.com/kb/HT3964 Intel-based Macs: Resetting the System Management Controller (SMC) 

  • IMac mysteriously wakes from Sleep

    Hi, I have had this problem with my iMac where when I put it to sleep, it will mysteriously wake up at 7pm, even when no one is home. At first I thought someone at home was trying to get into my computer because every time I came home, I'd find my computer awake, and it bothered me. Then I realized that even if someone was not home, it would wake at that time anyway. What is going on? What is happening, why is it doing that? Should I be worried? I came across this post:
    http://discussions.apple.com/message.jspa?messageID=5826698#5826698
    Is this what I need to do? I just wanted to make sure before I did something stupid.
    Thanks

    Well, It's certainly been awhile, and I have forgotten about it as well, but remember it from time to time. I said I would post back, and I am posting back.
    Unfortunately, I have had it wake maybe a couple times since I put in that command, but not nearly as "predictable" or often as prior to the terminal workaround. I am unsure if there is a complete fix to this yet myself. If there is, please let me know. It may have been solved in the 10.5.5 update, I have no clue, I haven't had it wake unexpectedly within the past month, so I don't know if the problem is still there or not.
    Thanks.

  • Macbook pro (2009) Freezes when trying to wake from sleep

    Hey guys,
    Since the 10.5.8 update my Macbook wont wake from sleep and i have restart it with the power button. The Macbook is totally frozen: the keyboard doesnt respond (caps button light wont go on and etc.) and my external monitor wont come on either.
    What I've tried:
    -Install combo update 10.5.8 (i did normal update first time)
    -Started up with all the magic keys combos (PRAM and SCM or whatever)
    -Tried the fix where you need to (re)enable the ethernet port
    -Set sleephibernate mode to 0
    Can anyone help me with this?

    I forgot to paste the details of the error log:
    Interval Since Last Panic Report: 105250 sec
    Panics Since Last Report: 13
    Anonymous UUID: AE0175B6-2007-4812-82BF-EFF25F7FD325
    Mon Aug 10 14:00:18 2009
    panic(cpu 0 caller 0x001B32B3): "Error 4 trying to transition CPU 1 to OFF"@/SourceCache/xnu/xnu-1228.15.4/osfmk/i386/acpi.c:154
    Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
    0x5653fd28 : 0x12b4c6 (0x45f91c 0x5653fd5c 0x13355c 0x0)
    0x5653fd78 : 0x1b32b3 (0x46b21c 0x4 0x1 0x3f36a7)
    0x5653fda8 : 0x50615ffe (0x50615e50 0x3 0x246 0x131e9a)
    0x5653fdc8 : 0x5060a44c (0x6609800 0x2 0x0 0x6723300)
    0x5653fde8 : 0x43a8a9 (0x6723080 0x53d848 0xffffffff 0x0)
    0x5653fe38 : 0x44cb7f (0x6609800 0x4a78d4 0x5653fe68 0x6f39780)
    0x5653fe88 : 0x41acd1 (0x660f000 0x4 0x1d 0x2)
    0x5653fec8 : 0x41ad93 (0x660f000 0x0 0x1 0x66fb680)
    0x5653fee8 : 0x42174c (0x660f000 0x123d3700 0x0 0x6610f00)
    0x5653ff38 : 0x41bd73 (0x660f000 0x123d3700 0x66fb680 0x0)
    0x5653ff68 : 0x425d58 (0x66fb680 0x1 0x5653ff98 0x4255b1)
    0x5653ff98 : 0x425a3a (0x6610f00 0x0 0x12951128 0x41c978)
    0x5653ffc8 : 0x1a14fc (0x6610f00 0x0 0x1a40b5 0x73746b0)
    Backtrace terminated-invalid frame pointer 0
    Kernel loadable modules in backtrace (with dependencies):
    com.apple.driver.AppleACPIPlatform(1.2.5)@0x50609000->0x50646fff
    dependency: com.apple.iokit.IOPCIFamily(2.6)@0x505a1000
    dependency: com.apple.iokit.IOACPIFamily(1.2.0)@0x505b8000

  • Macbook Pro won't wake from sleep - Error 4 trying to transition CPU 1 to OFF

    My macbook pro wont wake from sleep, it restarts and I get this problem report / kernal panic, if anyone could help that would be wonderfull. Thankyou.
    Interval Since Last Panic Report:  203371 sec
    Panics Since Last Report:          15
    Anonymous UUID:                    XXXXXXXX
    Mon Apr 22 17:42:20 2013
    panic(cpu 0 caller 0xffffff80046c02ee): "Error 4 trying to transition CPU 1 to OFF"@/SourceCache/xnu/xnu-2050.22.13/osfmk/i386/acpi.c:182
    Backtrace (CPU 0), Frame : Return Address
    0xffffff80e6cbbc70 : 0xffffff800461d626
    0xffffff80e6cbbce0 : 0xffffff80046c02ee
    0xffffff80e6cbbd40 : 0xffffff7f8694f8d3
    0xffffff80e6cbbd70 : 0xffffff7f86952e9a
    0xffffff80e6cbbd90 : 0xffffff8004a59e7e
    0xffffff80e6cbbde0 : 0xffffff8004a75432
    0xffffff80e6cbbe20 : 0xffffff8004a3b6e6
    0xffffff80e6cbbe60 : 0xffffff8004a35a42
    0xffffff80e6cbbeb0 : 0xffffff8004a3f8c4
    0xffffff80e6cbbef0 : 0xffffff8004a3f99f
    0xffffff80e6cbbf30 : 0xffffff8004a452aa
    0xffffff80e6cbbf80 : 0xffffff8004a453d9
    0xffffff80e6cbbfb0 : 0xffffff80046b2977
          Kernel Extensions in backtrace:
             com.apple.driver.AppleACPIPlatform(1.7)[D49DC2E0-97DF-32E6-A8ED-7A12EF1AA51B]@0 xffffff7f86945000->0xffffff7f8699cfff
                dependency: com.apple.iokit.IOACPIFamily(1.4)[A35915E8-C1B0-3C0F-81DF-5515BC9002FC]@0xfffff f7f84be6000
                dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f84ca3000
    BSD process name corresponding to current thread: kernel_task
    Mac OS version:
    12D78
    Kernel version:
    Darwin Kernel Version 12.3.0: Sun Jan  6 22:37:10 PST 2013; root:xnu-2050.22.13~1/RELEASE_X86_64
    Kernel UUID: 3EB7D8A7-C2D3-32EC-80F4-AB37D61492C6
    Kernel slide:     0x0000000004400000
    Kernel text base: 0xffffff8004600000
    System model name: MacBookPro6,2 (Mac-F22586C8)
    System uptime in nanoseconds: 42160665696
    last loaded kext at 9523564336: com.apple.driver.AppleHWSensor          1.9.5d0 (addr 0xffffff7f866a0000, size 36864)
    loaded kexts:
    com.apple.driver.AppleHWSensor          1.9.5d0
    com.apple.filesystems.autofs          3.0
    com.apple.driver.AppleBluetoothMultitouch          75.19
    com.apple.driver.AppleTyMCEDriver          1.0.2d2
    com.apple.driver.AGPM          100.12.87
    com.apple.driver.AudioAUUC          1.60
    com.apple.driver.IOBluetoothSCOAudioDriver          4.1.3f3
    com.apple.driver.IOBluetoothA2DPAudioDriver          4.1.3f3
    com.apple.iokit.IOBluetoothSerialManager          4.1.3f3
    com.apple.iokit.IOBluetoothUSBDFU          4.1.3f3
    com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport          4.1.3f3
    com.apple.iokit.IOUserEthernet          1.0.0d1
    com.apple.Dont_Steal_Mac_OS_X          7.0.0
    com.apple.driver.ApplePolicyControl          3.3.0
    com.apple.driver.AppleLPC          1.6.0
    com.apple.driver.AppleBacklight          170.2.5
    com.apple.driver.AppleMikeyHIDDriver          122
    com.apple.driver.AppleHDAHardwareConfigDriver          2.3.7fc4
    com.apple.driver.AppleHDA          2.3.7fc4
    com.apple.GeForce          8.1.0
    com.apple.driver.AppleMikeyDriver          2.3.7fc4
    com.apple.driver.AppleUpstreamUserClient          3.5.10
    com.apple.driver.AppleMCCSControl          1.1.11
    com.apple.driver.AppleSMCPDRC          1.0.0
    com.apple.driver.AppleSMCLMU          2.0.3d0
    com.apple.driver.AppleIntelHDGraphics          8.1.0
    com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
    com.apple.driver.AppleMuxControl          3.3.0
    com.apple.driver.AppleIntelHDGraphicsFB          8.1.0
    com.apple.nvidia.NVDAStartup          8.1.0
    com.apple.driver.SMCMotionSensor          3.0.3d1
    com.apple.driver.AppleUSBTCButtons          237.1
    com.apple.iokit.SCSITaskUserClient          3.5.5
    com.apple.driver.AppleUSBCardReader          3.1.7
    com.apple.driver.AppleUSBTCKeyEventDriver          237.1
    com.apple.driver.AppleUSBTCKeyboard          237.1
    com.apple.driver.AppleIRController          320.15
    com.apple.driver.AppleFileSystemDriver          3.0.1
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
    com.apple.BootCache          34
    com.apple.driver.XsanFilter          404
    com.apple.iokit.IOAHCIBlockStorage          2.3.1
    com.apple.driver.AirPort.Brcm4331          614.20.16
    com.apple.driver.AppleAHCIPort          2.5.1
    com.apple.driver.AppleUSBHub          5.5.5
    com.apple.driver.AppleFWOHCI          4.9.6
    com.apple.iokit.AppleBCM5701Ethernet          3.6.0b1
    com.apple.driver.AppleUSBEHCI          5.5.0
    com.apple.driver.AppleUSBUHCI          5.2.5
    com.apple.driver.AppleEFINVRAM          1.7
    com.apple.driver.AppleSmartBatteryManager          161.0.0
    com.apple.driver.AppleACPIButtons          1.7
    com.apple.driver.AppleRTC          1.5
    com.apple.driver.AppleHPET          1.8
    com.apple.driver.AppleSMBIOS          1.9
    com.apple.driver.AppleACPIEC          1.7
    com.apple.driver.AppleAPIC          1.6
    com.apple.nke.applicationfirewall          4.0.39
    com.apple.security.quarantine          2
    com.apple.kext.triggers          1.0
    com.apple.driver.IOBluetoothHIDDriver          4.1.3f3
    com.apple.driver.AppleMultitouchDriver          235.29
    com.apple.iokit.IOSerialFamily          10.0.6
    com.apple.iokit.IOFireWireIP          2.2.5
    com.apple.iokit.AppleBluetoothHCIControllerUSBTransport          4.1.3f3
    com.apple.iokit.IOSurface          86.0.4
    com.apple.iokit.IOBluetoothFamily          4.1.3f3
    com.apple.driver.DspFuncLib          2.3.7fc4
    com.apple.iokit.IOAudioFamily          1.8.9fc11
    com.apple.kext.OSvKernDSPLib          1.6
    com.apple.driver.AppleSMBusController          1.0.11d0
    com.apple.nvidia.nv50hal          8.1.0
    com.apple.NVDAResman          8.1.0
    com.apple.driver.AppleSMBusPCI          1.0.11d0
    com.apple.driver.IOPlatformPluginLegacy          1.0.0
    com.apple.driver.IOPlatformPluginFamily          5.3.0d51
    com.apple.driver.AppleHDAController          2.3.7fc4
    com.apple.iokit.IOHDAFamily          2.3.7fc4
    com.apple.driver.AppleGraphicsControl          3.3.0
    com.apple.driver.AppleBacklightExpert          1.0.4
    com.apple.iokit.IONDRVSupport          2.3.7
    com.apple.iokit.IOGraphicsFamily          2.3.7
    com.apple.driver.AppleSMC          3.1.4d2
    com.apple.driver.AppleUSBHIDKeyboard          170.2
    com.apple.driver.AppleHIDKeyboard          170.2
    com.apple.iokit.IOSCSIBlockCommandsDevice          3.5.5
    com.apple.iokit.IOUSBMassStorageClass          3.5.1
    com.apple.iokit.IOSCSIArchitectureModelFamily          3.5.5
    com.apple.driver.AppleUSBMultitouch          237.3
    com.apple.iokit.IOUSBHIDDriver          5.2.5
    com.apple.driver.AppleUSBMergeNub          5.5.5
    com.apple.driver.AppleUSBComposite          5.2.5
    com.apple.iokit.IO80211Family          522.4
    com.apple.iokit.IOAHCIFamily          2.3.1
    com.apple.iokit.IOUSBUserClient          5.5.5
    com.apple.iokit.IOFireWireFamily          4.5.5
    com.apple.iokit.IOEthernetAVBController          1.0.2b1
    com.apple.iokit.IONetworkingFamily          3.0
    com.apple.iokit.IOUSBFamily          5.5.5
    com.apple.driver.AppleEFIRuntime          1.7
    com.apple.iokit.IOHIDFamily          1.8.1
    com.apple.iokit.IOSMBusFamily          1.1
    com.apple.security.sandbox          220.2
    com.apple.kext.AppleMatch          1.0.0d1
    com.apple.security.TMSafetyNet          7
    com.apple.driver.DiskImages          345
    com.apple.iokit.IOStorageFamily          1.8
    com.apple.driver.AppleKeyStore          28.21
    com.apple.driver.AppleACPIPlatform          1.7
    com.apple.iokit.IOPCIFamily          2.7.3
    com.apple.iokit.IOACPIFamily          1.4
    com.apple.kec.corecrypto          1.0
    Model: MacBookPro6,2, BootROM MBP61.0057.B0F, 2 processors, Intel Core i7, 2.66 GHz, 8 GB, SMC 1.58f16
    Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
    Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 512 MB
    Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1067 MHz, 0x802C, 0x31364A53463531323634485A2D3147314431
    Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1067 MHz, 0x802C, 0x31364A53463531323634485A2D3147314431
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.106.98.100.16)
    Bluetooth: Version 4.1.3f3 11349, 2 service, 18 devices, 1 incoming serial ports
    Network Service: Ethernet, Ethernet, en0
    Serial ATA Device: M4-CT512M4SSD2, 512.11 GB
    Serial ATA Device: WDC WD7500BPKT-00PK4T0, 750.16 GB
    USB Device: hub_device, 0x0424  (SMSC), 0x2514, 0xfa100000 / 2
    USB Device: hub_device, 0x0424  (SMSC), 0x2514, 0xfa140000 / 6
    USB Device: Ext HDD 1021, 0x1058  (Western Digital Technologies, Inc.), 0x1021, 0xfa142000 / 11
    USB Device: hub_device, 0x0424  (SMSC), 0x2640, 0xfa141000 / 10
    USB Device: iPhone, apple_vendor_id, 0x12a0, 0xfa141300 / 14
    USB Device: Ext HDD 1021, 0x1058  (Western Digital Technologies, Inc.), 0x1021, 0xfa141200 / 13
    USB Device: Ultra Fast Media Reader, 0x0424  (SMSC), 0x4060, 0xfa141100 / 12
    USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0237, 0xfa120000 / 5
    USB Device: BRCM2070 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0xfa110000 / 4
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8218, 0xfa113000 / 9
    USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa130000 / 3
    USB Device: hub_device, 0x0424  (SMSC), 0x2514, 0xfd100000 / 2
    USB Device: Keyboard Hub, apple_vendor_id, 0x1006, 0xfd130000 / 4
    USB Device: Apple Keyboard, apple_vendor_id, 0x0250, 0xfd132000 / 5
    USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 3

    Until a knowledgeable user comes along who can read kernel panic logs, search for a solution from the following links:
    OS X: About kernel panics 
    User Tip:  Kernel Panics? Don't panic too!
    How to troubleshoot a kernel panic
    MacBook, Mac OS X (10.6)
    Use Software Update or the OS 10.6.8 combo update to update your OS.  Also, update everything SU has to offer for your computer as well as your USB connected devices.  When done, repair permissions and restart your computer.

  • All applications are not responding when wake from sleep.

    All applications are not responding when Macbook pro wake from sleep,
    the keyboard and touch pad are okay.
    Why?
    Thanks a lot.

    I want to see if there's a service that may be preventing it from working properly when waking from sleep. To test this, we'll need to Disable all non-system-critical services to see if the issue occurs.
    If it does not, that means one of those services that was disabled, is causing the issue.
    If the touchscreen is still unresponsive after sleep with all of those non-critical services disabled, then it may be something with the registry or the hardware. 
    Here are the steps to disable non-critical services:
    Windows + Q to bring up Search
    Type 'msconfig' and press Enter
    Click the Services Tab
    Check the Hide All Microsoft Services box 
    Click the Disable All button 
    Click Apply and Restart
    Once it restarts let it go into sleep mode and then wake it back up from sleep mode and test the touchscreen. Do this a couple of times, if you have time. (When you're done troubleshooting, you'll have to go back into msconfig and re-enable all of those non-critical services, apply and restart.)
    Let me know the results when you get a chance, please

  • I am using a USB keyboard and everytime I wake the iMac from sleep the keyboard will not respond unless I unplug and replug the keyboard. I am using a mid-2010 iMac with OSX 10.6. Any help would be appreciated.

    I am currently using a USB keyboard (PC Model) and everytime I wake the computer from sleep the keyboard no longer responds unless I unplug and replug it. The USB mouse I am using works fine with no issues and I have already gone through the prompt to identify the keyboard in the settings. If anyone know of a setting I can use to permenantly enable the keyboard so I no longer have to unplug and replug it that would be appreciated.
    Thank you.

    Your 2010 MBP would be able to handle Yosemite, but I would strongly suggest that you get the current problem sorted out before trying to upgrade to Yosemite. I'd also recommend another backup that isn't created by Time Machine if you are thinking of upgrading. SuperDuper and CarbonCopyCloner can make bootable clones of hard drives. If you clone your existing system to a fresh external drive, you would be able to boot from that drive and recover quickly in the event that your Yosemite upgrade didn't work out. Time Machine backups are not 100% reliable.
    It's possible that, if your internal HD is the one that shipped with your MBP in 2010, it may be failing. If it keeps needing repairs, that is probably a sign that it is approaching the end of its useful life.
    Have you run Disk Utility's Repair tool on the external drive as well?
    I mentioned the hub because some people have reported here that attaching their USB 3 drives through a USB 2 hub solved some disconnection problems. A good-quality powered USB 2 hub won't cost much.
    My most recent brush with random disconnections involved a nice new OWC drive enclosure. I used the cable that came with the drive, but the drive kept disconnecting. Using a different cable solved the problem. You wouldn't expect that what appeared to be a high quality cable would be a problem straight out of the box, but it was.

  • Imac wont connect when wake from sleep ?!

    Even after all the recent updates, my Imac still wont connect from sleep!!!

    How do you know "engineering is working on it"?

  • IMac 6 won't wake from sleep

    This is a 2nd hand question, as the computer does not belong to me, but I'm trying to assist a friend.
    The iMac will not wake from sleep.  If the hard drive is set to never sleep, the system will come out of sleep.  But if the hard drive spins down and the system goes into standby mode, it can't be awakened.  Not by a short press of the power button, movement of the mouse, or click of the keyboard (wired or wireless).
    The iMac was taken to an Apple store for diagnosis.  They used a 3rd party software tool (not the default OSX diagnostics) that showed no hardware issues per se, but it was noted that when putting the iMac to sleep and attempting to awaken it, the processor never gets a signal to do so.  They surmised that it may be a power supply issue or something to do with a component on the motherboard.  They re-installed the OSX completely fresh to rule out software as an issue.  But the next day, the owner found that the same problem persisted.
    First, I'm curious to know if anyone has ever reported this problem with the iMac 6 and if there's a known culprit.  And naturally, if that culprit is easily fixed or if the motherboard would have to be replaced.
    Second, since the problem does not happen with the hard drive staying "awake", would this problem be averted by installing an SSD?

    Hello, what 3rd party Apps might be installed?
    One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
    PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
    Reboot, test again.
    If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or 3rd party add-on, Check System Preferences>Accounts>Login Items window to see if it or something relevant is listed.
    Check the System Preferences>Other Row, for 3rd party Pref Panes.
    Also look in these if they exist, some are invisible...
    /private/var/run/StartupItems
    /Library/StartupItems
    /System/Library/StartupItems
    /System/Library/LaunchDaemons
    /Library/LaunchDaemons

  • IMac will not wake from sleep after 10.4.8 Update

    Recently after a couple of software updates my IMac goes to sleep and the Bluetooth keyboard and mouse will not wake it. The option for wake with Bluetooth is checked. I zapped the PRAM and also checked the HD, Nothing has changed. NOTE: No new software or hardware installs were done except for 10.4.8 update and the other mac software updates. This did not happen in prior versions of the OS on my iMac. Is this a new bug?
    iMac G5 1.8 (pre iSight)   Mac OS X (10.4.8)   Bluetooth, Wake from Sleep

    I've been dealing with this same issue, have tried everything, but to no avail. After MANY sessions on the phone with Apple tech support, as well as an Apple product specialist, I was advised to erase my computer and do a fresh install. I did an archive an install, which didn't help, but am not thrilled about the prospect of erasing everything and starting over. This problem started after the August 2006 round of updates. I feel it's bluetooth related, because I used a usb keyboard and mouse for a week as a test, with no problem. The funny thing is, I unchecked "allow bluetooth device to wake computer" thinking it might help, but the bluetooth devices continue to wake the computer anyway (except when it refuses to wake, of course!)
    Jerry

  • New iMac wakes from sleep sluggishly and requires password despite preference setting

    My new iMac (Core i7) wakes from sleep very sluggishly and it requires a password despite the fact that I have de-selected this option in Preferences.
    I have a new iMac.  I used Migration Assistant to move everything from my older Mac Pro, which was running Lion.  Under the Secucrity settings in Preferences, I de-selected "Require Password."
    I use a bluetooth mouse and wireless keyboard.  Typically I click the mouse to wake up my Mac.  The screen comes to life and the cursor moves with the mouse, but...how can I explain this?  When I move the mouse in this situation, the cursor paints a gray swath over the desktop screen.  It looks like I am using a paint program.
    After clicking the mouse repeatedly the computer becomes responsive and the password entry screen appears--most of the time.  I have tried to set it up so a password is not required, but usually I get this screen.  SOMETIMES, it behaves correctly--say one-fourth of the time.
    Another problem...  When I shut the iMac off and then back on, it does not always link to my Apple bluetooth mouse.  I have to connect a USB mouse and re-link the wireless mouse.
    I wonder if this is a software/OS issue.  My old Mac Pro had similar wake-up issues, and I wonder if Migration Assistant transferred them to my new machine.
    Your thoughts and great ideas are appreciated.
    John Graham
    Fort Collins, CO

    I too am having trouble with my bluetooth mouse after upgrading to 10.7.2 and the associated iOS 5 upgrades.  The mouse keeps losing its connection.  I've turned bluetooth off, trashed the preferences, rebooted and repaired both the keyboard and mouse but the mouse keeping dropping out.  Keyboard seems ok.  Anyone have any ideas? 
    Len

Maybe you are looking for

  • (HELP) ORA-27101: shared memory realm does not exist

    Contributors, I am a newbie in Oracle and have oracle database installed and working as expected until few days ago. One day i was getting these ugly messages when connecting via SQLplus ERROR: ORA-01034: ORACLE not available ORA-27101: shared memory

  • Problem while reversing ARE1 Document

    Hi All, I am encountering  the error as per the screenshot attached. I have checked all settings and it is ok eg.ETT-Account Determination and the GL is also present. I hv gone through the notes mentioned in earlier posts but I don't think it will he

  • Run same 9i forms servlet in different browser windows

    Hi all, I'm using Oracle9iAS Forms Service to deploy the forms. The problem that I have, is that I'm not able to run the same forms 9i servlet in two different browser windows. I'm able to run the 9i test form with the following URL in browser window

  • Fehlermeldung beim Start von Bridge CC

    Hallo, bekomme seit einigen Wochen ständig folgende Meldung wenn ich Bridge CC öffne > In den Voreinstellungen der Bridge finde ich allerdings nur "Cache leeren" und "Cache komprimieren". Beides versucht, hat aber nichts gebracht. Auch über das Wekze

  • Persistent search connection not released

    Hi, We are using DS6.1 and have set up two persistent search job using LDAP JDK4.1 to monitor some directory entry changes. During testing, we've found that client connections are not released on DS server when network problems caused the socket conn