IMac12,2 osx 10.6.8. wont recognize external audio output

iMac12,2 osx 10.6.8. wont recognize external audio output via USB. The device, focusrite scarlet 2i2, works fine on my laptop not drivers are required and should work on 10.6.5. or greater. Any help would be very much appreciated.

iMac12,2 osx 10.6.8. wont recognize external audio output via USB. The device, focusrite scarlet 2i2, works fine on my laptop not drivers are required and should work on 10.6.5. or greater. Any help would be very much appreciated.

Similar Messages

  • USB wont recognize external drive

    I see that there have been a lot of problems with the usb ports recognizing external hard drives.  Some of the fixes are so confusing, I cant even follow them!  Does anyone have an easy fix for this problem or do you think apple care will know?  i have used this drive for about a6 months with no problem, and then all of a sudden my Imac wont recognize the drive.

    HI
    You should check in System Profiler, under the USB section to see if the drive appears there (Apple -> About This Mac -> More Info -> USB)
    Also, try resetting the SMC & PRAM to see if that helps

  • Mac wont recognize external usb HD anymore.

    Hello all,
    I have an external seagate HD that I formatted on my mac which worked on both pc and mac fine. Suddenly my mac wont pick it up when I plug it in. The pc still does. Was this after the update? SO, I re-formatted on pc to ntfs and still no go. ANy help please on how to gain access to it on mac with only communication being with pc. Thanks!

    Try a simple SMC reset:
    Reset the SMC (for MacBook, MacBook Pro and MacBook Air models with internal batteries):
    1. shut down the MAC
    2. Plug in the MacSafe adapter (i.e.power cord/charger)
    3. PRESS AND HOLD SHIFT+CONTROL+OPTION+POWER buttons at the same time
    4. Release all keys and buttons simultaneously
    5. press the power button to turn on your mac as usual

  • X10.4 wont recognize external FW with X10.3 installed as startup disk

    I have a G5 double processor and need to run my AVID Xpress software, which requires X10.3 to run.
    i have bought an external firewire drive and installed x10.3 on a partition, but my G5 does not show it as a choice when I open system preferences and click on startup disk.
    Anyone know what the problem is?
    Thanks. This is kinda urgent, so any replies are greatly appreciated.
    Juan Carlos
    Message was edited by: JuanCarlosZaldivar

    Searching Avid Xpress on http://www.versiontracker.com/macosx/ , I find that Xpress Pro is the only version of Xpress that has been updated since Tiger's release. It says it works with 10.4 PowerPC which means it should work on any G5 that could install 10.4.6 or 10.4.7:
    http://www.versiontracker.com/dyn/moreinfo/macosx/19024
    Versiontracker's listing is a little old. They do have a version 5.7.5 also which works with 10.4.10 and both Intel and PowerPC Macs:
    http://www.avid.com/products/xpresspro/specs.asp
    As you'll notice a Leopard compatible release is planned.
    Time Machine will recover any system that is stored in its recovery disc but you need a 10.5 installer disc to recover from it and a Mac that can install 10.5 (867 Mhz G4 or newer). If your G3 Powerbook has Firewire, it may be able to backup the Powerbook if it is mounted as a Target Disk Mode hard drive to another machine putting the Powerbook into Target Mode by booting it with the T key held down:
    http://docs.info.apple.com/article.html?artnum=58583
    I'd post a question on the Time Machine forum to verify this is possible with pre-10.5 machines.
    Some G5s do allow you to install 10.3. See this article:
    http://docs.info.apple.com/article.html?artnum=25517
    Though you should use the 10.3 installer disc that shipped with the said G5, and not the one installed on an external drive from a G3.

  • Macbook Air no longer recognizes external audio devices

    My Macbook air's audio port recently stopped recognizing external devices such as speakers and headphones.
    The external devices are functional with other devices and fully plugged in, but only the internal speakers will produce sound.
    This problem happened just recently with audio devices that had been working fine with the laptop before. I did not use any
    audio devices that I haven't used with the computer before. They are fully plugged in, and I've already tried twisting the head
    of the cord to see if it's going bad. The headphones I tried to use work fine with my iPhone.
    I've tried opening System Preferences > Sound, to select the device, but it doesn't show up in the device list.
    The internal speakers work fine, and continue to work even though the headphones or external speakers are plugged in, and in
    the case of the external speakers, turned on.
    Does anyone know if updating my audio driver would help?
    Has anyone expirienced and resolved this problem or a similar problem?
    Does anyone know how I can actually get in touch with someone who works at apple without having to go in to their store, as
    I don't have time to do that and wouldn't be able to leave my laptop for repair since I use it for college?
    Any help would be greatly appreciated!
    Thanks so much!
    Update:
    I've tried using "Audio MIDI Setup", the external devices do not seem to be recognized by the computer.

    Because something has gone wrong. I have no way of knowing what, and without backups, you're in a very bad situation.
    If you want to preserve the data on the startup drive, and it's not already backed up, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data, you can skip this step.
    There are several ways to back up a Mac that is not fully functional. You need an external hard drive to hold the backup data.
    1. Start up from the Recovery partition, from Internet Recovery, or from a local Time Machine backup volume (option key at startup.) Launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
    2. If Method 1 fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
    3. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    4. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.

  • Itunes wont recognize

    I have a macbook with the newest version of osx and have two ipods. I have a 5th generation video and a old 10gb. I have two itunes libraries, one for each one. My computer wont recognize the old ipod, but will recognize the 5th generation. I have tried the 5 r's and all the other trouble shooting tips. Anybody know whats goin on?

    I had the same problem and I found that if you make sure iTunes is off before you plug it in it will work.

  • Trying to update my iphone 5s but my itunes wont recognize my device and my home screen is stuck telling me to connect to itunes. HELP!!!

    Clicked on the new iphone update on my phone since i finally have time to update it, and my phone turned off and now its stuck telling me to connect to itunes. ive had it connected to itunes yet it wont recognize my device. WHAT DO I DO?!

    This article explains what to do if your phone is disabled. Follow the steps carefully.
    Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support

  • My home button is broken ipod touch 5th generation and wont open and itunes wont recognize it

    my home button is broken ipod touch 5th generation and wont open and itunes wont recognize it

    Turn on without Home/Power Button

  • My macbook pro retina wont recognize my external hard drive

    my macbook pro retina wont recognize my external hard drive.
    i opned the hard drive in the past on my computer and used it alot.
    one time when i took it out i forgot to eject it, and since then when ever i conect it it would never show up on my computer or ever recognize the device.
    please help me!

    For starters try a PRAM reset.
    DALE

  • I updated my Apple Id and password  by email and received a confirmation. However my iphone still has the old ID and wont recognize either password. I am unable to access new apps on my phone. How do I get my ID to update on my phone?

    I updated my Apple Id and password  by email and received a confirmation. However my iphone still has the old ID and wont recognize either. How do I update the user id on my phone? I assumed it would update when I restarted butit did not

    Downlands wrote:
    I cant sign out without the old password for the reduntant appleid. I cant remember that password and because the appleid doesnt exist except on my iphone no email arrives to tell me. This is a deleted appleid but I cant get rid of it on the phone. can you help please?
    If you're asked for the password to your previous Apple ID when signing out of iCloud - Apple Support

  • Computer wont recognize 10GB Ipod Gen 3 - Please Help

    Alright, Im not an idiot and I read every post related to this subject. I reviewed each of the following links and did everything they told me to do:
    http://docs.info.apple.com/article.html?artnum=305136
    http://docs.info.apple.com/article.html?artnum=301343
    http://docs.info.apple.com/article.html?artnum=61711
    I recently upgraded to the newest iTunes version and now my older Ipod is no longer recognized by my computer. iTunes doesnt open, it just gives me an error message in the bottom right corner saying Unknown Device. Ive tried looking for / updating drivers, reseting, everything and nothing works. I tried every USB port on my laptop as well. Running Win XP. Can anyone offer any other suggestions on how i can fix this???
    Thanks

    Its been working perfectly for 4 years until last week. I have the USB/FireWire combo for hooking it up to my computer. It worked with all the older version of iTunes and now that 7.1.1 is on there, it wont recognize it at all. The computer is convinced there are no drivers for the "unknown device" and all searches performed for the missing drivers come up empty. The computer cannot see the iPod as an iPod, and none of this happened until I downloaded the most recent iTunes.

  • Pls.help my iphone stuck in recovery mode and itunes wont recognize it..i tried the other options that posted here,,,pls tell me what to do..

    pls. help my iPhone stuck in recovery mode and iTunes wont recognize it..i tried the other options that posted here,,,pls tell me what to do..before it was just stuck in an apple logo but when i tried recovery mode to itunes then it stuck..

    Hi awison,
    If your iPhone is not recognized by iTunes on your Windows computer you may want to use the steps in this article to troubleshoot -
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    This may also resolve your recovery mode issue. If it does not, use the steps in this article to resolve it -
    Use iTunes to restore your iOS device to factory settings
    http://support.apple.com/kb/HT1414
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • Windows Wont Recognize

    I'm updating my Dads iPod for him and for the first time ever, Windows/iTunes wont recognize it.
    On the iPods display screen it says do not dissconnect so its not my USB ports nor the cable. Any ideas?
    BTW, this is the iPod Color U2 version thing

    This http://www.copytrans.net/helpcopytrans.php#22 is an interesting iPod detection problem check-list.

  • My itunes account shuts down for no reason.  It wont recognize my iphone and there is an issue with network connectivity and itunes.  I have already  reinstalled itunes and did a syste restore on my computer, firewall checked and virus scan done.  Ideas??

    My itunes account on windows xp shuts down for no reason.  If even try to delete something from my library it shuts down.   It wont recognize my iphone and there is an issue with network connectivity and I can't connect to the store.  I have already  reinstalled itunes and did a system restore on my computer, firewall has been checked, itunes is ok on firewall and virus scan done.  Ideas??

    Same problem. I can see the itunes store so not a problem with windows firewall. The account is active on my iphone so i know i am not locked out. I can connect the PC to my iphone so i know itunes is working ok. It is just logging into itunes on this pc which doesn't work. Only thing I can think of is that the email address I use for my apple id has been offline for a while and is working again now, I'm wondering whether this has been the case for others who are having this issue?

  • I've got movies on my computer on itunes, however my parents wish that i use my laptop for itunes stuff, and i cant figure out how to get those movies to be able to sync with my ipod again, it wont recognize that I have them. Suggestions?

    I've got movies on my computer on itunes, however my parents wish that i use my laptop for itunes stuff, and i cant figure out how to get those movies to be able to sync with my ipod again, it wont recognize that I have them. Suggestions?

    While you're in itunes, with the leftside window open, click on Apps. Then, look across the top middle of your itunes screen. You will see several choices: All, Iphone/iPad Touch, Ipad, Ipod Games, List, and Updates. 
    Clicking on each of these gives you a different view. 
    When you select ALL you will see all of your apps. When you select Updates you sill see only the apps that need to be updated. When you are in Updates you will see the Update button in the lower right corner.
    Hope this helps.

Maybe you are looking for

  • Using of cash journal for advance payment to vendor or from customer.

    using of cash journal for advance payment to vendor or from customer.please give advice?

  • How to fix YouTube HTML5 playback?

    All I want is to have 1080p available for YouTube with HTML5. The only way to achieve this I know of is enabling MSE (media source extensions). Enabling the required option [1] leads to stalled playback of videos. They don't play. Sometimes they do b

  • Connection Pooling in the DMZ

    Hi, Have a Sun One web server 6.1 in the DMZ. I want to set up connection pooling on this to connect to a DB on our LAN through an inner firewall. Is this a good idea, or a security risk? Also, when configuring, any way to secure the username/passwor

  • How to use Array in Formcalc?

    Please share syntax for using Array in Formcalc.

  • Aufruf worddatei aus pdf

    Hallo zusammen, ist es möglich eine worddatei aus einer pdf-Datei kommentarlos bzw. ohne irgendwelche Abfragen durch den Adobe Reader X aufzurufen. Hintergrund: Die pdf wurde in Word erzeugt, das andere Dokument als Hyperlink hinterlegt. Dann als pdf