IMacG5 won't recognize itouch 4.1

My iTouch doesn't show up in finder or iTunes when I plug it in. I need to sync my calendars!!!!
I have tried changing all the usb cords and ports - they are not the problem. The cords work with the charger and the ports work with other devices.
I plug the iTouch in and it doesn't show in the Finder or in iTunes. I'm not sure what else to do!

iOS 4.1 requires iTunes 10. iTunes 10 requires (although you should check this on the Apple website) Mac OS X 10.5.8 or higher. So you might have to upgrade your OS first.
However, if iTunes is 10.x and working on your computer, then follow the troubleshooting steps here: http://support.apple.com/kb/HT1747

Similar Messages

Itunes v11.1 won't recognize itouch 4th gen

My itunes v11.1 is not recongnizing the itouch 4th gen that my sister just got. It's jailbroken and i want to restore it. the problem is that the unit is not opening up.help!

Try DFU mode and then restore
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
and
iOS: Device not recognized in iTunes for Windows
or
iOS: Device not recognized in iTunes for Mac OS X

ITunes won't recognize iTouch

Each time I start computer, I must uninstall/re-install iTunes in order to have Touch recognized. I've tried all Apple support suggestions, and disabled antivirus/firewall aps. Suggestions? Thanks.

The next time you connect your iPod to your PC, run an iTunes device connectivity test and post back the results. See this article for instructions on running this test.
iTunes for Windows: Device Connectivity Tests
Are they another USB devices also plugged into your PC when you connect your iPod?
B-rock

My mac won't recognize my itouch

My mac won't recognize my itouch anymore.

Have you seen either of these Apple support documents?
http://support.apple.com/kb/TS1591
http://support.apple.com/kb/TS1591
B-rock

Itunes library too large and won't recognize all files, just new ones but

still shows the old ones and their location in the library. I was keeping the library on the 2TB external drive. It got too large. Now I want to put the music on one of the 1TB drives and just the videos on the 2TB drive. From my PC, I can watch everything.
I cannot download to an iPod or iTouch anything from the 2TB drive. When I hit max capacity, I temporarily started saving on one of my internal 2TB drives (space wh*re, I know)before I hit on what my solution would be, and now I can only download from that location. Why?
What can I do? I even tried switching the library location back, and it won't recognize anything. I'm screwed, and I have all this material... YEARS of collecting...
Someone please help me...

To clarify, currently on the 2TB external drive are music and videos. I want to split them up and hopefully save some space - and maybe foresee problems in the future when I hit max capacity on the 1TB external, and think about a 4GB (not the best option I see at this time) or another 2 2TB drives.
Doesn't the Library file just save locations when iTunes closes down so everything should be OK? I mean, the prog can recognize everything, it just won't download to anything, even if I move from the external drive an older movie to the new drive, it refuses to "see" the movie so I can download it.

New hard drive won't recognize my iPhone

My hard drive crashed and my replacement hard drive won't recognize my iPhone. I can see all my content, but can't move or replace it. I was able to access content on my iTouch just fine and luckily synched my contacts back into my laptop, but no dice on the phone. Any ideas? BTW, my phone is a jailbroken original iPhone and I am not particularly proficient with this kind of stuff.

Does it boot into Open Firmware with CMDOption+of ?
http://docs.info.apple.com/article.html?artnum=42642
reset-nvram (press Enter)
set-defaults (press Enter)
reset-all (press Enter)
Have you done a PRAM reset...
http://docs.info.apple.com/article.html?artnum=2238

IPod in recovery mode, iTunes won't recognize

I'm very frustrated. I tried upgrading my iTouch to the 2.0 software, but it sent my iPod into recovery mode. When I plug my iPod into my computer, iTunes won't recognize my iPod at all. If I plug it into another computer it is recognized and I can restore it. I've repeated this about 3 times. What's going on?

I found some videos on youtube that might help:
http://www.youtube.com/watch?v=xO1jiPE9nnY
http://www.youtube.com/watch?v=V1l4ZLCFWZU

ITunes won't recognize iPod Nano (1GB, 1st generation)

I have been having problems Sync'ing my iPod nano with iTunes, however, the more I read help articles and follow the steps, the worse the problem gets. (I'm on a PC using Windows XP)
I've gotten to the point where I updated my iPod software in Disk mode (up until then it was being recognized only in Disk mode), but when iTunes failed to recognize it when not in Disk mode I preceded to restore my iPod to factory settings, as instructed in the help articles.
Now, up until then, I still had music in my iPod, and I was being able to charge it and listen to my music even though I couldn't sync the iPod anymore. After restoring, I not only lost my music (which I was aware of), but it STILL did not fix my problem. So I started to get annoyed.
I then noticed that my iPod was being recognized by My Computer, just not by iTunes, so I began to perform the steps indicated in the following article:
http://docs.info.apple.com/article.html?artnum=93716
I restarted my iPod service - no luck
I removed iTunes - no luck
I emptied my Temp directory and restarted...
That's when iTunes stopped recognizing my iPod altogether, not even in Disk mode. Not only that, but it seems to have affected the iPod itself, since it won't turn off or exit Disk mode anymore. So now I'm scared of going though with any more steps on whichever "help" articles and making the problem even worse than it already is (if that's possible).
The only other information I can provide is that windows is still recognizing my iPod, no problem, and when I connect my iPod, iTunes actually launches... but DOESN'T recognize a thing. So I ran a diagnostics using iTunes and here's what I got (iPod diagnostics):
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
INTEL_ D945GCL_
iTunes 7.3.2.6
iPodService 7.3.2.6 is currently running.
iTunesHelper 7.3.2.6 is currently running.
Current user is an administrator.
The current local date and time is 2007-08-30 11:53:26.
Connected Storage Devices:
Unidade de disco, MAXTOR STM3160211AS, Bus Type ATA, Bus Address [0,0]
Unidade de disco, MAXTOR STM3160211AS, Bus Type ATA, Bus Address [0,0]
Unidade de disco, Apple iPod USB Device, Bus Type USB
Universal Serial Bus Controllers:
Standard Universal PCI to USB Host Controller. Device is working properly.
Standard Universal PCI to USB Host Controller. Device is working properly.
Standard Universal PCI to USB Host Controller. Device is working properly.
Standard Universal PCI to USB Host Controller. Device is working properly.
Standard Enhanced PCI to USB Host Controller. Device is working properly.
No IEEE 1394 Host Controller found.
Connected Device Information:
IPOD (H:\), iPod nano running firmware version 1.3.1
All green lights, and as you can see, according to iTunes, NO PROBLEM! Except that it won't recognize the iPod that the disgnistics says exists and reads... ?!?!?!
If anyone could shed some light on my situation, i would be VERY greatful!

My IPod Nano will charge when connected to my computer but it won't come up on My Computer or iTunes. So I can't update the songs. I've already tried reseting the iPod. Does anybody know what I can do to fix it.

I just downloaded the latest version of iTunes on my PC, Window 8 and now it won't recognize my iPhone 4. The device never shows in the menu bar

I just upgraded to 11.1.4.62 and now my iTunes won't recognize my iPhone 4. The device never shows in the menu bar

Hello there.
The following Knowledge Base article provides some great, in-depth steps for troubleshooting your issue:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Adobe won't recognize that I uninstalled CS on old computer, won't let me activate on new computer

Adobe won't recognize that I uninstalled CS on my old computer, won't let me activate it on new computer.

Yes, uninstalling is not the same as deactivating. Call support to reset activations.
Mylenium

Please Help - My iTunes library won't recognize my iPod classic

My iTunes library won't recognize my iPod classic 80gb. I try doing the trouble shooting steps on apple, but they still did not work. Any help would be greatly appreciated. I'd love to add some newer music to my old iPod for listening in the car or when travelling. Thanks a lot.

Hello dmbnewfie,
Welcome to the Apple Support Communities!
I understand that your iPod classic is not being recognized in iTunes when you connect it to your computer. I know you have tried some troubleshooting on the Apple website as well, but without knowing which steps you have completed, I would suggest working through the attached iPod classic Troubleshooting Assistant.
Apple - Support - iPod - iPod classic Troubleshooting Assistant
Have a great day,
Joe

TS3988 I changed my Apple ID to my new email address successfully for the iTunes and App store but it won't work for iCloud and it won't recognize my password. I read that this can't be done. How am I supposed to get into iCloud?

I changed my Apple ID to my new email address successfully for the iTunes and App store but it won't work for iCloud and it won't recognize my password. I read that this can't be done. How am I supposed to get into iCloud? I plan on getting rid of my old email address which is my old Apple ID so how is that going to work?

Same question Wish someone had replied!
I changed my Apple ID to my new email and now cannot find any way to access icloud. Unfortunately I had allowed icloud to hijack my airbook files, so of course I am afraid I will lose them tomorrow when I exchange my iphone for a new one and cannot keep an icloud account i cannot access. What a poor sync system! Really atypical for apple!

Deskjet 3050 won't recognize wireless network anymore.

Product: HP Deskjet 3050
Operating system: Windows 7-64 bit
Printer quit printing wirelessly. Using the control panel on the printer, I restored defaults. Now it won't recognize any wireless networks. I have unplugged computer, but that didn't help. I don't want to unplug my router, because I will lost all my DVR items (we are on AT&T uverse). Any tips?

Run a Wireless Network Test from the Network menu of the front panel. What does it say?
If everything is OK (which I suspect), re-install the printer with the temporary use of a USB cable just as you did originally when you installed it.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

HP Envy 5530 - computer won't recognize that the printer is on the same network

Product Name: HP ENVY 5530
OS: Windows 8.1
No changes made to system before issue occured
I bought this wireless printer last week (5-13-14). I have a working printer that was connected to my husband's work laptop via USB cable, but needed one to connect to our family computer, which is in a different room with the modem/router. My husband travels for work, so I want to be able to print without disturbing him and while he is away on business. I turned the printer on and connected it to my network with the password and printed out the network settings and the wireless report. There are about 8 other wireless networks in range of my printer (we're in a residential neighborhood), but we aren't having a problem with it connecting to someone elses stuff. I went online to download the driver software and it downloaded fine. I clicked on the desktop icon to launch the control panel for the printer and it opened up for me to install the printer. I went through every step and it won't recognize the IP address or the name of the printer, and therefore won't open up for me to do any scanning. Both the printer and PC are connected to the same network, but they won't recognize each other when it comes to going through the HP software to scan or print. I can go into word or something to print and it will let me print wirelessly, but it won't do anything from the control panel of the print software because it thinks the printer hasn't been installed. I've had Windows 8 on this computer since I bought it in 2012, but I have the computer defaulted to go to my desktop instead of the start screen, so I don't know if that makes a difference. I am going to go ahead and remove the device and uninstall everything so I can try again later. If I had known this was going to be a problem, I would have not bought the printer and just kept on doing what we'd been doing.

Hello SarahD_07,
Welcome to the HP Support Forums!
I understand you are having some troubles getting the Envy 5530 printing wireless on Windows 8.1. Are you able to take the I.P address of the 5530, type it into the address bar of your web browser and hit enter. Does it load a page about the printer?
Run the Print and Scan Dr to see if it can clear up the scanning issues if you can view that above page.
I will look out for your reply,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

I know have a mobile me account and so my apple id is switched from my email address. i am trying to update my apps but it won't let me as it won't recognize my new 'ID'. how can i fix this on my iphone?

I have mobile me account now and so my apple id is switched from my email address to my mobile me address. Since I have made this change I can't update my apps. Everytime I try to sign in it won't recognize the switch. I have updated all the proper information on my iphone, however, when updating apps it still shows my apple id as my email address and not the mobile me account address. I am not sure what else to do??? I have even sync'd my iphone and tried to do it through my pc, however, it says that it can't update (nothing to update). I have ten updates sitting on my iphone apps...What to do...what to do? Very confused.

Where are you trying to log in? You should be able to change your ID at http://appleid.apple.com - can you log in there?
Before you change your ID you should log out of the iTunes Store and on any devices which are logged into iCloud. Then once you've changed it you can log back in with the new ID. (Your iCloud synced data will disappear from the device when you do this but will reappear when you sign back in - give it time).
If you are unable to sign into http://appleid.apple.com you will need to contact Support. Go to http://iforgot.apple.com and sign in with your iCloud login. A new password will be sent to your associated email address. If this doesn't work you will have to contact Support. Go to https://getsupport.apple.com . Click' See all products and services', then 'More Products and Services, then 'Apple ID', then 'Other Apple ID Topics' then 'Lost or forgotten Apple ID password'. If you have any problems with that try this form: https://www.apple.com/emea/support/itunes/contact.html

IMacG5 won't recognize itouch 4.1

Similar Messages

Maybe you are looking for