Image automatically opens each time I start Photoshop

Every time I open photoshop, an image I created opens with it. Only one. I can close it; but it reappears every time I open the program. How can I delete it permanently?

Hi,
What operating system and version of photoshop are you using?
It sounds like the recovery file from a photoshop crash is opening.
If your using tabs in photoshop and after the image opens, you should be able to right click on the tab and choose either Reveal in Explorer or Reveal in Finder
and then delete the file from the folder that opens.

Similar Messages

Updater runs each time I start Photoshop

I'm using Photoshop CS2 and recently installed it on my new Vista system. During normal use, I log in to Windows as a non-administrator, as recommended for security purposes.
Each time I launch Photoshop, it wants to check for updates, and asks for administrator privileges to do so. This is very annoying, first because I then have to enter my password for the admin account each time, and second because I don't need to check for updates every single time I run the program.
I can instruct Windows to run photoshop.exe as an administrator each time it runs, which fixes the annoying problem of it checking for updates, but it still means I have to enter my administrator password each time I want to run Photoshop. Surely there is a good solution to this problem? I'd be happy if I could just instruct Photoshop once and for all to "do not check for updates". I have this option set and it seems to work when I run it as an administrator but when I run it as a non-privileged user, it still insists on checking for updates.
Help?

Turn off the updater.
It's been notoriously buggy, and if you're currently up-to-date, you don't need it to be running. If you even sleepily pay attention to what's going on in the world of Adobe and Photoshop, you should become aware of updates when they become available.
Better to go get and install them manually, rather than let your computer make that decision for you.

Ghost Excel workbook opens each time I start excel and prevents formulas - tried all suggested solutions without luck

Hi
When I start excel and open any workbook a 'ghost' work book opens it doesn't contain cells and is just greyed out. When I am working on a document whenever I start to write a formula the ghost wbook opens and I cannot see the original document to complete
the formula. If I open multiple workbooks I sometimes get a ghost workbook for each doc that is open - after a while I get error message to say not enough reources to do even simple tasks like save work or open a document.
I have posted on several forums and tried all suggested solutions without luck - this is really preventing me from using excel which I need daily. Personally though I am only intermediate user I think it may have something to do with a workbook that I downloaded
that had macros in it but I cant be sure
Any help greatly appreciated
Thanks
Dave

Hi Dave,
First make sure have installed the latest update. Second, we can repair Office 2013 from Control Panel > Programs and Features. Third, open Excel 2013 in safe mode, if it works fine, disable some 3rd-party application add-ins.
Could you please share a screenshot of this “ghost” workbook and upload it to OneDrive? I’ll analyze it in detail as soon as accessing it.
If there is anything about this issue, don’t hesitate to tell me.
Best regards,
Greta Ge
TechNet Community Support
It's recommended to download and install Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support
teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office programs.

Need help resolving an error message. Each time i start photoshop element 8.0 I get a message 150:30 error

How to clear 150:30 error message in photoshop element 8.0

A quick Google yielded this link that was marked as a correct answer by someone else with PSE8 getting that error, although the messages are a couple years old so maybe you can’t get it to work on newer OSes:
http://helpx.adobe.com/creative-suite/kb/error-licensing-stopped-windows.html

Error Console opens each time Firefox starts using latest stable version.

I open Firefox, it opens and it's Error Console opens. There are a history of information messages, warnings, and errors showing. Why is this happening?

Some mouse gesture extensions (Tools > Add-ons > Extensions) have been reported to cause that to happen.
See:
* [[Troubleshooting extensions and themes]]

Welcome tab present each time I start Firefox, my homepage is opened in separate window. How do I make it stop?

Welcome page opens each time I start Firefox, my homepage opens in separate window. I uninstalled Firefox and reinstalled and it continues to happen. Homepage is set to google and is present when I go to the general tab.

See: [https://support.mozilla.com/en-US/kb/Firefox%20has%20just%20updated%20tab%20shows%20each%20time%20you%20start%20Firefox Firefox has just updated tab shows each time you start Firefox]
Also see:
*[http://kb.mozillazine.org/Preferences_not_saved Preferences not saved (Mozillazine article)]
*[https://support.mozilla.com/en-US/kb/Preferences%20are%20not%20saved Preferences are not saved]
*[https://support.mozilla.com/en-US/kb/How%20to%20set%20the%20home%20page How to set the home page]
**Firefox supports multiple home pages separated by '|' keyboard symbol(s)
 
 
'''You need to update the following.''' The Plugin version(s) shown below was/were submitted with your question and is/are out of date. You should update to avoid known security issues with the version(s) you have installed. Click on "More system info..." to the right of your question to see what was included with your question.
*Adobe Shockwave for Director Netscape plug-in, version 11.5.9.615
*Adobe PDF Plug-In For Firefox and Netscape "9.4.4"
#'''''Check your plugin versions''''' on either of the following links':
#*http://www.mozilla.com/en-US/plugincheck/
#*https://www-trunk.stage.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#*There are plugin specific testing links available from this page:
#**http://kb.mozillazine.org/Testing_plugins
#'''Update Shockwave for Director'''
#*NOTE: this is not the same as Shockwave Flash; this installs the Shockwave Player.
#*Use Firefox to download and SAVE the installer to your hard drive from the link in the article below (Desktop is a good place so you can find it).
#*When the download is complete, exit Firefox (File > Exit)
#*locate and double-click in the installer you just downloaded, let the install complete.
#*Restart Firefox and check your plugins again.
#*'''Download link and more information''': http://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox
#'''Update Adobe Reader (PDF plugin):'''
#*From within your existing Adobe Reader ('''if you have it already installed'''):
#**Open the Adobe Reader program from your Programs list
#**Click Help > Check for Updates
#**Follow the prompts for updating
#**If this method works for you, skip the "Download complete installer" section below and proceed to "After the installation" below
#*Download complete installer ('''if you do NOT have Adobe Reader installed'''):
#**SAVE the installer to your hard drive (save to your Desktop so that you can find it after the download). Exit/Close Firefox. Run the installer you just downloaded.
#**Use either of the links below:
#***https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox ''(click on "Installing and updating Adobe Reader")''
#***''Also see Download link''': http://get.adobe.com/reader/otherversions/
#*After the installation, start Firefox and check your version again.

Each time I start FF tabs from previously visited websites automatically propagate. How do I keep this from happening?

Each time I start FF, tabs from previously visited websites automatically propagate. How do I keep this from happening?

Open the Options dialog (in the menus select Tools > Options).
Go to the general panel, and in the Startup section change the option for "When Firefox starts"

Addblock Pluse must be disabled/enabled each time firefox starts-won't start automatically

Each time I start firefox I have to disable/enable the addblock plus add on. In the extensions it indicates that it is enabled, but it is inoperative until I disable and then enable it again.

Still no help on making Add Block Plus start automatically when firefox is opened. In the add ons section it shows that it is enabled, but it is not working. By disabling and enabling the add on becomes operational.

How can I stop power point from opening each time my Macbook Pro starts?

How can I stop power point from opening each time my Macbook Pro starts?

Remove it from the list in Startup Items (System Preferences).

Before Firefox 4, each time I started the computer, it would load the windows I still had open when I closed down the night before. This has disappeared. Can I restore this?

Before Firefox 4, each time I started up the computer in the morning and clicked on Mozilla Firefox, it would load up the windows I still had open when I closed down the night before. Very handy! How do I restore it this terrific time-saving feature?
Thanks
Brian
Sydney Australia

Is there a solution to this? Could someone post a link?

I desperately would like to update Firefox to version 10 from version 9 but each time I try, I am stuck with FF10 checking addons for comparability and the Welcome page opening every time I start the browser.

Windows 7 64 bit
I desperately would like to update Firefox to version 10 from version 9 but each time I try, I am stuck with FF10 checking addons for compatability and the Welcome page opening every time I start the browser. I continue to have to revert to version 9 to resolve this issue.

Sorry to be a while getting back! Tried all of that with no sucess so this AM, bit the bullet and deleted the FF folder from programs and downloaded and installed FF 10.01. Still was plagued with the same problem. Went into the appdata folder and there were two sessionstore.js files. Deleted them both, restarted the browser and no compatibility check for add-ons was done at start up and the extra tab for Welcome to FF was no longer opening Everything seems to be working as it should and I did not loose any of my settings.. Thank you for trying to help and I hope my solution helps anyone else who might experience this in the future. Here's hoping the next update goes smoother!

Bridge very slow to open each time - CS6

I'm frustrated with how long Bridge takes to start up each time I launch the app. I have a very powerful machine (8-core, 3+ GHz, 24GB RAM, 500GB SSD, etc.); I have set the cache to save in each folder (I am told this should speed up the process, as only the cache associated with the folder I am opening must be read); I have set the 'number of files' option in the Cache slider to a high number (as I have the disk space), etc.
I appears that the app is rebuilding the cache every time I open!! A small black dialog is present on the left saying "Building..." - and it can take 5-6 minutes each time I start the program.. this is terrible performance! I have tried compacting and rebuilding the cache, etc.
What can be done??

hmmmm - you mean a piece of software doesn't always work as expected?? LOL
It seems to me you are a smart person
So I will turn off the "automatically export cache to folders when possible" option, change my cache location from D: drive back to C: drive (the SSD).
Thats what I would do, including to delete (or if you like purge central cache but I prefer the manual delete) the existing cache when it is getting to large. I usually dump it when it gets to 40 GB. You start again with a fresh and empty cache file, but cache on an SSD is building fast, so I usually do this in the evening and start building it again overnight using my main folder in the content window and menu view / show items from subfolders and let t run. On my former system with HDD this could take several hours but the SSD is much faster.
Should I leave the Prefs/Cache item "Keep 100% previews in cache" turned on? I would think so…
That depends on your needs, I don't use 100 % very often (have a 30" screen) and it is set to on. However this means every time you choose to see a 100 % preview it builds a large cache file and stores it in the folder 'full' If you deselect it this folder won't get filled so quickly but every time you visit this file again to look at 100 % it needs to build cache, choose your pick
Since all my monitors are 1920x1200, does it make any difference about setting "Generate Monitor sized previews..." - I thought this was just to force large sized previews if one happened to have a small screen laptop for instance hosting the app…
Although there are different opinions in this forum (Yammer has a long thread about this subject) I have set it to on and with great satisfaction. When you use the space bar to show a file full screen then having set this option to on should provide you the best result instantly and should not need to rebuild cache for best view.
This machine can only support 1 SSD drive, on my next upgrade I plan to install 2 SSD (1 for OS/Apps, 1 just for PS Scratch) as well as the striped set of data drives.
Even with 100 GB of data (per day that is a massive production, I don't envy you for that…) but with a clear strategy you should be able to use all on the main SDD. It takes a bit discipline and concentration to be sure the files are copied to other disks and backed up safely before deleting them from SDD.
Thanks again for the advice.
Your welcome

In ios 7, how do I get the calendar to open each time in list mode?

In ios 7, on the iphone 5, how do I get the calendar to open each time in list mode? It always opens is strange new mode and goes to list mode only if I click the search icon.

For some weird reason beyond my comprehension, and I am a smart fellow I think; Adobe starting with acrobat/reader 8 has decided to hid the menu icon Ribbon (i guess you would call it) until you have a PDF open. In versions past if you had these icons on the screen you could actually use them to open Pdf's or create pdfs from scans.
Pesonally for me its a dumb idea. But was justified as allowing for more screen area to view. The guy that thought up the idea should be taken out behind the barn and given 10 licks for stupid ideas. :-)

Each time I start iTunes, it configure again the program.

I'm running iTunes v7.6.2.9 with Windows Vista Ultimate 32bits and SP1. I reinstall iTunes, but it change nothing. Each time I start iTunes, the configure window appear.
I also have some problems with QuickTime. When I try to watch a movie, I get this error message: "Error 46: Could not load or find the QuickTime ActiveX control.
Thanks in advance for your help.

This seems to be caused by a bug in the Vista installer. Are you using the link on the Quick Launch toolbar? Try using the iTunes link in the main Start Menu and it should work OK. If not try opening the program from the *C:\Program Files\iTunes* folder. I simply replace the Quick Launch link with a freshly made shortut to the iTunes msin program. I then get caught out again after every iTunes upgrade....
tt2

Airport Express software update reminder each time at start up

Why do I get Airport Express software update for 5.4.2 reminder each time at start up? I try to update from 5.4.1 by clicking update button, and zoom, the Airport Express screen disappears and no update begins. Your help is appreciated.

I'm not getting an update message, so I can't re-create your view, but this might help.
Open AirPort Utility. On the AirPort Utility menu right next to the Apple icon, select Check for Updates.
Any help?

Image automatically opens each time I start Photoshop

Similar Messages

Maybe you are looking for