Image Button file browser icon missing

Hi there, I've been using C5 this week for the 1st time and have been working through a project. All has gone ok to date, a few niggles along the way but I've run into a huge bug this morning which is wrecking my plan to finish the project.
I'm adding an image button to a slide and have found to my frustration that the file browser in Properties has vanished, pushed out past the properties block, which of course cannot be resized to the right (thanks Adobe, nice UI design there). This means I can't choose any image for my button apart from those already loaded in the preview which is utterly useless. I've attached a screenshot to show what it looks like.
As you can see the Image Button drop down has gone very wide and pushed the folder browser icon out of sight. Simply maddening!
I had been using image buttons all week with out any issues. Yesterday an update appeared (5.0.1.624) for C5 so I applied it. Then this issue started. I have since uninstalled C5 and reinstalled without applying the update and its still doing it. What I didn't do was reboot after the uninstall, maybe I should have done...
Anybody else come across this? if it is a bug its a crippling one!!!!

Hi Niall-Mac and KiHwa -
This is indeed a CP bug!!! We found this some months ago - it turns out that if you name your button images with a very long file name (35-40 characters plus), it slowly starts pushing the "browse" folder icon further and further to the right of the panel. Add a few more buttons with longer file names to the gallery and eventually it disappears altogether, like you both have encountered (see image).
Workaround 1 (best practice IMO until CP dev team fixes this):
We started creating buttons in a separate CP file, creatively named "projectName_buttons" - this way any time we need a button we go to this file and copy/paste it into our project and we never have to mess with the button gallery in our working (source) file. If the "browse" icon disappears again in our buttons file, we simply copy all our buttons from our "project_buttons" file into a new blank project and save over the old (broken) one.
Workaround 2 (not so user-friendly):
1. Stretch your timeline panel as wide as it can go on your monitor (I use two 21" monitors to develop so I can make my timeline rather long)
2. Undock the properties panel so that it is a floating window
3. Drag the properties panel by the topmost dark gray bar just above the "Properties" tab and place it just below the timeline until it snaps into place - now don't let go of it just yet, drag it up a tiny bit further - as you do this a blue bar will appear signifying that it will dock to that position (underneath the timeline) - when you dock it to the timeline it will stretch to the same length as the timeline and voila, you can now see the "browse" icon - however, who wants a properties panel that takes up your whole monitor!!!! I certainly don't.....
On a side note, it is very disheartening that once buttons are in the button gallery you have NO CONTROL over them - if they need to be edited you are forced to rename them so you can import a fresh button. This method unnecessarily creates TWO copies of a button in your gallery - the more edits you make to a button the more copies of that button you get in your gallery....some control over the button gallery would be nice.
Hope this helps.
Cheers,
pixelatedView99

Similar Messages

Release 4: File Folder icon missing in SQL Worksheet

The file folder icon is now missing in the SQL Worksheet. Using File->Open just opens the file in the editor. There is no way to run the SQL file. Clicking on Run in menu across the top causes the "The target bogus.sql cannot be started because it is not a runnable target." error message.
The help for "Using the SQL Worksheet" shows the file folder icon on the screen shot.
How does one open a SQL file and run it in Release 4?
Mike

The File Open (or Open button on the main toolbar) works better in some respects - it opens in a SQL Worksheet (although not associated with a database connection), name s the tab with the filename, indicates a changed file by switching to italics in the tab name and requests confirmation on close if the file is modified.
However, the default directory is the <SQL Developer directory>/jdev and the file type defaults to all.
The Right-Click in SQL Worksheet opens the file from a default of C:\Documents and Settings\<username> (for me at least) with a file type of *.sql. The tab name is not renamed when opening the file (stays as the connection name) and there is no close confirmation if the file is modified.
The File Open makes it harder to lose stuff, but is a bit more work to use. As redoing lost work is more effort than switching file types and potentially more directory navigation on opening, I think the File Open option is better than the Right-click, but I would prefer something with the File Open functionality from within an existing SQL Worksheet.

Bridge Browser icon missing after the upgrade to OS2

I have suddenly realised that the Bridge Browser icon has been missing from my PlayBook after the Upgrade to OS2. My service provider data plan supports browsing and I use to do that earlier on OS1. Now a days, since I am mainly using Mifi device...did not use Bridge Browser....BUT suddenly realised that this icon is missing.....
Any idea what I need to do to get that icon back on PlayBook? and also use it....

It's really funny...The OS2 manual says that there will be an icon for Bridge Browser....but in reality...you do not require any separate bridge browser icon...Browser main icon works for both...wifi connection as well as bridge connection....
I am surprised, why RIM has not highlighted this fact in its OS2 manual.....
Anyways....my problem is resolved....

Bridge Browser icon missing - even though connected on BES

The Bridge Browser icon has disappeared off my Playbook.
Before you tell me it's OS2 it's not - the Playbook is connected to a BES smartphone, and I've had OS2 since I first got the Playbook and it's only now that the icon has gone.
I've tried a reset, I've tried re-pairing the tablet and the phone. All the other Bridge icons are there and the tablet is fuctioning normally other than this.
Any help is much appreciated.
Ronz

Have you tried deleting and reconnecting your BlackBerry Bridge?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!

Blackberry Browser Icon Missing, NOTHING helped...

Hey guys, I got my blackberry Pearl 8100 for quite some time now, but for some weeks now I got some Problem I wanna fix right now.
Since I never wanted to use my blackberry browser I didnt even realise its icon was gone, but now I do and I want it back...
I've tried different solutions offered in other threads (resend service book, reregister HRT Host Routing Table and even pull out the power cell while it was turned on and leave it out for at least 30 seconds)
Nothing helped, the Icon is not showing up, not at the Theme Im using where it should be at the home screen and not even in the menu.
I can only start the browser while doing this in the main menu: switch application and then chose the browser.
Ive found something which could at least help to help me, when Im at Options under the Blackberry Browser, then go to advanced options and then under default browser I cannot chose anything at all. Just Empty...
Since the Browser is installed there must be some kind of solution to bring the Icon back, but I dont know how...
On the Home Screen at my Today & Zen Theme there is just an empty place now where the BB Browser Icon should be...
Thanks a lot for your help!
Message Edited by litchblade on 10-23-2008 07:25 AM
Message Edited by litchblade on 10-23-2008 07:25 AM

So the icon isn't hidden?
Does it show the IPPP service book is listed?
Does the Browser show as being installed under Options | Advanced Options | Applications?
If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
Remember to resolve your thread by clicking Accepted Solution.

Browser Icon missing

I do nto have the Browser Icon on my 8700 desktop.. does it need to be installed ?
Solved!
Go to Solution.

If you do happen to have a data plan and it's still not working, try the following:
Go to options > advanced options > host routing table > click in on your trackwheel > select register now
This should provision your data services.
~Tami~
Intellectuals solve problems; geniuses prevent them.
-- Albert Einstein

Firefox Open File Dialog icons missing?

When Firefox calls the Open File Dialog the must majority of folders and files show up with the same white icon. How can I fix that?

gnome-icon-theme
gnome-icon-theme-symbolic
gtk-update-icon-cache
hicolor-icon-theme
icon-naming-utils
kdeartwork-emoticons
kdeartwork-iconthemes
kdepim-akonadiconsole
kdeplasma-addons-applets-icontasks
oxygen-icons
perl-gtk2-trayicon

Error: Unable to locate an image file browser...

I get the error below when I insert an image element and try to associate a picture to it by either double clicking it or using the browse button in the Draw palette.
I have looked in my install directory and the "FileSystemBrowser.dll" file is present as well as the "ImageFileBrowserIDL.dll" file, so what gives?
Running LiveCycle ES2 9.0.0.2.20120627.2.874785

Hi,
you should be able to fix that problem by re-registering Designer file browser DLL.
http://thelivecycle.blogspot.de/2014/02/diy-bugfix-image-file-browser.html

Found 0 results for My browser is missing important items, the whole tool bar...., drop down menu to print, copy, work off line, file, save, book mark, history. I just installed latest foxfire on windows xp. Found some instructions but they called for usi

Found 0 results for My browser is missing important items, the whole tool bar...., drop down menu to print, copy, work off line, file, save, book mark, history. I just installed latest foxfire on windows xp. Found some instructions but they called for using keys my computer doesn't have ( key in OSX There is no file, edit , history, help, tools, navigation, all the things your directions say to use. Also I always get hung up and the message a scrip is running. I don't know what thises scrips are but I sure don't need them.
== This happened ==
Every time Firefox opened
== I just noticed it. It probably happened when I upgraded foxfire.

'''Can't see the Menu Bar''' (File, Edit, View, History, Bookmarks, Tools, Help)?
Turning the Menu Bar on and off is a new feature in version 3.6.
''(Linux & OSX see: [[Menu bar is missing]] )''
''Windows'' Method 1. '''''Hold down''''' the key and press the following letters in this exact order: V T M
''Windows'' Method 2. Press and release the key. The Menu Bar will be displayed; then choose ~~red:V~~iew > ~~red:T~~oolbars and click on ~~red:M~~enu Bar.
The Menu Bar should now be displayed permanently, unless you turn it off again using View > Toolbars. Check mark = displayed, NO check mark = not displayed.
See: http://support.mozilla.com/en-US/kb/Menu+bar+is+missing
'''Navigation Toolbar, Bookmarks Toolbar and other Toolbars''' under View > Toolbars. Clicking on one of them will place a check mark (display) or remove the check mark (not displayed).
'''To display the Status Bar''', View, then click Status bar to place a check mark (display) or remove the check mark (not displayed).
'''Full Screen mode'''
http://kb.mozillazine.org/Netbooks#Full_screen
Also see:
''' [[Back and forward or other toolbar buttons are missing]]'''
'''[[Navigation Toolbar items]]'''

I was trying to open finder with the pinwheel spinning when I accidently hit the off button. When restarting a small image of the finder icon blinked on

I was trying to open finder while the pinwheel was spinning & I accidentally hit the off button. When I tried to restart I get a gray screen & after about a minute in the middle of the screen appears a half inch by half inch image of the finder icon that blinks on & off with a question mark. Thats all it does, no other functions work just the icon blinking on & off with the question mark. Please help, I really hope I didn't destroy my mac.
Julian

A flashing question mark appears when you start your Mac
Question (?) Mark, Blinking Folder, or Gray Screen at Startup
These are related but not identical issues. Their causes are outlined in Intel-based Mac- Startup sequence and error codes, symbols. Solutions may be found in:
A flashing question mark appears when you start your Mac
Mac OS X- Gray screen appears during startup
In most cases the problems may be caused by one or more of these:
Problem with the computer's PRAM - See Resetting your Mac's PRAM and NVRAM.
Boot drive's directory has been corrupted - Repair with Disk Utility.
Critical system files are damaged or deleted - Reinstall OS X.
The disk drive is physically non-functional - Replace the hard drive.
Note that the information I have provided is what Apple recommends, If other users suggest different solutions than found here, then be sure what they recommend does not impact on your warranty, if any, or ability to get continuing Apple service.
Please don't start removing drives or changing cables unless you know what you are doing and have exhausted other non-invasive alternatives outlined here. If you perform any work yourself that is unapproved by Apple, then you will void any warranty you may have and lose all further Apple Support.
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
The main difference if you are using Lion or Mountain Lion is that you must first boot from the Recovery HD. Simply boot from the Recovery HD to perform the above.
Reinstall Snow Leopard Without Erasing The drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing The Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Missing images is Aperture Browser

I have a Project with muptiple images and a number of them appear only as a grey box in Browser mode, but appear normally in Viewer mode.
On those images that appear as they should, there is a small symbol in the lower right corner with a gray rectangle and arrow pointing up and to right; however, on those with no image in the Browser, the lower right symbol has a yellow triangular (caution?) symbol, with the same arrow pointing up and to right. This has occurred only in one Project.
I assume something I've done has caused this, but can't figure it out. Appreciate some help.
Tenhote

You have referenced masters and some of the masters are missing (as far as Aperture is concerned).
You need to spend some tie witht he manual all this stuff is explained there, See Understanding Badge Overlays
These are the three badges that deal with referenced files:
So now the question is did you realize you had referenced masters?

File icons missing/slow to load in Finder

I've noticed this on both of my Macs running 10.10.2. Quite frequently, the usual icons next to files are initially missing and sometimes will eventually load.
This is true for zip files, mp3 files, and application files specific to a certain app but the issues seems random and not related to any specific file types.
Does anybody know of a fix so that the icons are immediately visible as they have been in every previous version of OS X? I'll attach an image where you can see only one .zip file icon appears, and a bunch are missing as well as a .jpg icon

bump?

Q: General : Can workshop test form display a browse icon for file input?

Hi,
Is it possible to write a web service which takes in say a license file for validation
and returns a boolean true if
valid and false if not valid? Can the workshop test form display a browse icon so
that I can select the license file
from my local system? Or do I have to write an html/jsp front-end to the web service
myself?
Thanks,
Sadhana

Hi Adam,
Thanks a lot again for answering my question with such a nice
explanation!
-Sadhana
"Adam FitzGerald" <[email protected]> wrote:
>
Hi Sadhana,
Web services have two mechanisms to receive data that are part of the SOAP
1.1 specification.
The first mechanism is to pass the data as a parameter to the web service
operation
- this only works if the data is text based and can be imbedded in an XML
SOAP document
(i.e. it cannot be binary information like images or music not can it be
complete
standalone XML documents). We demonstrated this technique in class and it
is the
most common way to transmit information.
The second mechanism is to add the data to the SOAP request as an attachment
(similar
to email). This mechanism is not available directly in Workshop but WebLogic
server
does provide this capability if you use web service handlers. See the URL
below for
more information.
http://edocs.bea.com/wls/docs70/webserv/design.html#1053805
There is also a third programmatic solution. You could provide a URL for
the file
or document that you want to process as a parameter for the web service
and then
the web service could use the java.net API to retreive the document dynamically
during
processing. This has obvious preformance and security problems but it might
be applicable
in some situations.
Good luck
Adam
"Sadhana Jain" <[email protected]> wrote:
Hi,
Is it possible to write a web service which takes in say a license file
for validation
and returns a boolean true if
valid and false if not valid? Can the workshop test form display a browse
icon so
that I can select the license file
from my local system? Or do I have to write an html/jsp front-end to the
web service
myself?
Thanks,
Sadhana

File browse image item not saving

Hi,
Im faced with a problem whereby i created a file browse item to load/save images, thing is the image only gets saved when i edit the record and not on creation.
Any help please.
Thanks

Forms doesn't support multipage tifs.

Maybe enhancement request: File Browse item with Button in template style.

When I use a file browse item on a page it gets a standard HTML button. This looks a bit out of place among all the other template style buttons.
Is there a way to give the file browse button a template button style?

Hi Rene,
there is a nice workaround available.
You just need to create some css changes:
/* this one hides the original button + field */
input.file {
     position: relative;
     text-align: right;
     -moz-opacity:0 ;
     filter:alpha(opacity: 0);
     opacity: 0;
     z-index: 2;
}Now you have to choose which solution you like most:
http://www.quirksmode.org/dom/inputfile.html
http://www.shauninman.com/archive/2007/09/10/styling_file_inputs_with_css_and_the_dom
Seems like a nice plug-in solution. :)

Image Button file browser icon missing

Similar Messages

Maybe you are looking for