Image cannot be rendered because Aperture does not support image format

Dear all,
I have installed apple Aperture 3.03 and the complete Nick software plug-in selection:
• Dfine 2.0 for Aperture
• Color Efex Pro 3.0 Complete for Aperture
• Silver Efex Pro for Aperture
• Sharpener Pro 3.0 for Aperture
• Viveza 2 for Aperture
History
Until a few days ago the system was running ok / no notable issues on performance. / all pug in seem to run good / no issues. Also
• I Run OSX10.4/ Aperture 3.03 ( 32Bit mode)
• My library contains just over 10000 images / approximately 140GB
• I have recently updated the OSX software update including the security update 2010-005
• as well as the Snow leopard graphic update 1.0
• As far as I am aware all updates where automatically recommended by OSX Software update ( no manual intervention).
• As far as I remember after update the system still was running ok but honestly I can not tell you how many times the Nick Plug in started out of Aperture.
After all, Several times I continued using the system / still no noticeable problem until the following was happening:
Problem:
After creating with "PT gui" a panoramic image File type: "TIF" Pixel size: 5112 × 2556 (13,1 MP) I imputed this file in to Aperture (drag and drop). During the attempt to eddied this file with "Nick Define 2.0" the system was hamming up No response for several minutes from Dfine 2.0 / Aperture" At the end I had to "force quit" the applications.
After the consequential reopening of Aperture I tried again to eddied images with any Nick software Plug-In but each time Aperture prepares any image previously stored in my Library ti open the Pug in the following Error message appears:
*"This image cannot be rendered for editing because Aperture does not support the image format"*
Currently non of my previously in the library safed images can be opened in a Nick software Plug-In this applies to all file types I have tied " Raw, tif, jpg"
• I am still able to eddied normally with Aperture ( so far I do not find any other issue)
• A newly imported Raw image after being taken with my EOS 5D can be edited in the completed Nick software Plug-In selection ( so far I do not find any other issue)
The following actions have been taken to overcome the issue (all not successful):
• I restored my Library out of my back Up ( to previous time of event ( no Time machine back up)
• Uninstallation of all Nick software Plug-In selection
• Uninstallation Aperture Reinstallation Aperture / Nick software Plug-In selection
• Repairing the library ( all three possibilities)
• installation of latest EOS utilitys
Questions
• Can you support me to overcome this issue?
• Have you heard similar issues of Nick user Running the Aperture plug-ins?
For me it is really strange that even after replacing the the library in my normally not connect back up the problem still exists (this should be not affected by the event as the back up was not done any more) / new imported images are editable with the Plug-In.
I would be happy if you could support me in this issue.
Best regards,
Matthias
PS: I have reported this issue to Apple (via Aperture feedback) as well as contacted the Nick software support and currently waiting for feedback.
Harware:
Modellname: MacBook Pro
Modell-Identifizierung: MacBookPro5,1
Prozessortyp: Intel Core 2 Duo
Prozessorgeschwindigkeit: 2,66 GHz
Anzahl der Prozessoren: 1
Gesamtzahl der Kerne: 2
L2-Cache: 6 MB
Speicher: 4 GB
Busgeschwindigkeit: 1,07 GHz
Boot-ROM-Version: MBP51.007E.B05
SMC-Version (System): 1.41f2

Dear Ma-Le / All
I have just had the same problem
I use
• Aperture 3.03 with a iMac 2.8 Intel Core 2 Duo with all files on external hard disks (mac extended fomat as apple suggests) with referenced masters.
• Camera Nikon D300, with probably 75,000+ images on 2 hard drives
• Photoshop CS2 with PhotoTools 2.5 plugin
This has been working perfectly until yesterday when the system froze when I was using PhotoTools 2.5 with Photoshop CS2 - as a result of which I resorted to a force quit.
Since then on most of my files it has not been possible to use an external editor.
A message appears saying: *Editing Error - This image cannot be rendered for editing because Aperture does not support image format*.
The problem seems to apply to the attempted use of any external editor (including Noise Ninja)
The following have each been tried, all unsuccessfully:
- Using each of Aperture's library 3 first aid options
- Rebuilding directory using Diskwarrior
- Checking for virus using Virus Barrier X4
- Defragmenting library hard disk using TechTool pro
- Changing permissions settings
- Using Disk Utility first aid to repair permissions and checking main disk
- Removing some plist elements when open 'show package contents' of library
- Setting up a(n almost clean) new system, with newly loaded version of Aperture, with a new library from a vault saved prior to the crash when the problem first occured
Several things seem to me to be totally bizarre:
1 - The problem is the same on the other library hard disk which was not in use at the time
2 - The problem still occurs when a back up vault saved prior to this problem is loaded - using a new hard disk with a new system and a newly reloaded and upgraded Aperture software
3- The problem seems inconsistent. It appears to affect some photos but not all. Even from the same shoot, some photos can be edited using an external editor, whilst others cannot (but as far as i can tell most of the photos in a particular album seem to be consistently affected)
4- The only way around it seems to be if I import a new (copy image) from the original master. Then everything works ok, and I can successfully edit that copy image in photoshop / phototools plug-in.
I am beginning to wonder whether what has been corrupted is Aperture's ability to make copies from the master file which it then uses with the external editor (I have no real idea whether this is correct)
Does anyone have any ideas or solutions - or has anyone else been suffering a similar problem?
Eric
PS: As a professional photographer this problem is a really serious issue for me - and I really don't really want to go to Lightroom or Capture One

Similar Messages

This image cannot be rendered for editing because Aperture does not support

Editing Error: This image cannot be rendered for editing because Aperture does not support the image format.
I have been having this issue when trying to open photos in CS4. It only seems to be affecting images from the last year or so, although I'm using the same cameras (Canon 7D, 5D, and S90) as before. My library is large, going back to year 2000, and all the older images seem to work fine, but most all of the recent files display this error when trying to open them is CS4. I've tried the methods described in other threads and on the support website, namely starting aperture while holding option and command, pulling up the options to rebuild the library in various ways. I've done all three options, the last two twice, with no change. This is very frustrating to not be able to use the program in the way I had planned... Any ideas? I'm wondering if my library is simply too large- although I'm not sure if breaking the library into smaller chunks is the best way to go. I prefer having all my photos together. I have found that iMovie fails to operate properly when events get too large. Is this a similar problem?

Again, thanks for the input. As for the first suggestion, when I import without renaming they all work, but as of late, all appear to work no problem. It seems like it was a block of time from roughly October 2009 through November 2010 where most all the files imported during this date demonstrate the problem. As for the second suggestion, I've tried both 8 and 16 bit TIFF and PSD file types selected in the editor preferences, with no luck.
My next move has been to relocate the offending files out of their current location to another location (they are referenced, not managed). In doing this, I encountered what seems to be a file access or privelege error message, although about 20% of the files were moved, and in doing so, it seems to have solved the problem for those. But I don't have a good way of isolating the involved images outside of Aperture, and I don't want to move them with Finder anyways since that would ruin the referencing.
This bug is getting so complicated I'm ready to throw my hands in the air and just go back to Lightroom. Aperture has so much potential, especially in regards to integration with ipods, iPads, other Macs, etc. but in the 4 months I've been using it, I have spent WAY more time addressing buggy issues like this one than the amount of time supposedly saved using Aperture instead of Lightroom.

Export to ps does not support image format

I have just moved all my images to a new HD as the old one was failing. I have relocated the masters but when i then try to export to photoshop it has an error message saying Error, can not be rendered for editing because aperture does not support the image format???????
Any help greatly appreciated.

ANYONE!!! Have now just imported new files from my CF card and again cant export -
When trying to get the images to open in Photoshop, I y got this Error message This image cannot be rendered for editing because Aperture does not support the image format.
I am not sure why this has happened as it has been fine up until now?
Thanks

Aperture does not support Pentax K 3 RAW format. Any advises?

I just bought a Pentax K - 3 camera. Aperture does not support RAW format. Does anyone else have the same problem? Is there going to be Digital Camera RAW Compatibility Update for Pentax K 3?
I would be very pleased if someone could give me some advise,
Heikki

Only Apple knows when and if a specific camera's Raw format will be supported and they never say before they release the update.
In the meantime there a few different ways to work around this. One is to shoot Raw & JPG and use the JPG now and the Raw if and when the camera is supported. The other is to convert to DNG.
In the meantime let Apple know you want support for the camera, Aperture->Provide Aperture Feedback. Don;t know how much good is does but it can;t hurt.
regards
The list of supported cameras is here http://support.apple.com/kb/HT5955
Message was edited by: Frank Caggiano

I'm trying to install OS 10.6 onto my Macbook, which currently has OS 10.5.8. I clicked install (on the DVD) and selected my Macintosh HD drive. I was given the message that that disk cannot be used because it does not have the GUID partition????

I'm trying to install OS 10.6 onto my Macbook, which currently has OS 10.5.8. I clicked install (on the DVD) and selected my Macintosh HD drive. I was given the message that that disk cannot be used because it does not have the GUID partition. In order to have a GUID partition, it suggested I go to disk utility and make the change. I couldn't see the partition tabs in the disk utility application. So how do I accomplish the GUID partition?

The problem is, reformatting the partition may require you erase the hard drive. Normally Intel Macs are preformatted GUID. The fact that yours is not, says someone who initially installed the system on your Mac did you a disservice. Regardless, you should backup your data before you upgrade. GUID formatted drives generally are not compatible with iBooks (pre-2006 consumer notebooks by Apple) Powerbooks, and PowerMacs, and iMac G5s. So if you indeed have machine with the MacBook name on the screen frame, it was not properly formatted from the beginning.

HT5312 how do i delete WRONG cloud ID from my ipod touch? it was typed WRONG and I cannot delete it because it does NOT exist and I don't know password for email accoutn that does not exist

how do i delete WRONG cloud ID from my ipod touch? it was typed WRONG and I cannot delete it because it does NOT exist and I don't know password for email accoutn that does not exist

someone please help, I can't even delete content because it prompts me for a password for an account that I mistyped - wth?????

Could not complete the video frames to layers command because photoshop does not support video in th

When I attempt to import a video I get the message "could not complete the video frames to layers command because photoshop does not support video in this version of windows" I am running on windows 8.1 pro (32 bit), shouldn't this be compatible???????????

Unfortunatly, the 32 bit versions of windows doesn't support video in photoshop cc.
see this post:
http://forums.adobe.com/message/5802978#5802978

Aperture does not support the more expensive Lumix cameras from Panasonic!

Aperture does not support RAW in the GF!, G1 or GH! cameras - cameras hailed as breakthroughs. Does anyone know why or when it may do so?

I believe that you posted in the AirPort forum by mistake. It appears that you intended to post this in the Aperture forum.

[svn:fx-trunk] 12077: Although Spark RichText does not support link formats , modifying compiled FXG to not generate ActionScript code that will cause compile time exceptions .

Revision: 12077
Revision: 12077
Author:   [email protected]
Date:     2009-11-20 18:16:32 -0800 (Fri, 20 Nov 2009)
Log Message:
Although Spark RichText does not support link formats, modifying compiled FXG to not generate ActionScript code that will cause compile time exceptions.
Removing references to Flex Builder 3 in RPC.
QE notes: N/A
Doc notes: N/A
Bugs:
SDK-24305 - Link format property nodes cause errors on RichText in FXG 2.0
SDK-24322 - A couple references to Flex Builder 3 in Flex 4 LangRef (and code comments)
Reviewer: Deepa
Tests run: checkintests
Is noteworthy for integration: No
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-24305
    http://bugs.adobe.com/jira/browse/SDK-24322
Modified Paths:
    flex/sdk/trunk/frameworks/projects/rpc/src/mx/rpc/xml/XMLDecoder.as
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/fxg/FlexFXG2SWFTranscoder.java

I have a Nikon D7100 I have tried to open a raw file but it staes it does not support the format. I am up to date on all downloads.

I have Nikon D7100 and shoot in raw. I have tried to open a raw file in elements 10 but it states it does not support the format. I also have a D800 and these open file in elements camera raw. Can anyone help please?

Hi,
You need version 7.4 or higher to read raw files from, a D7100. Unfortunately, ACR 7.4 is not compatible with PSE 10.
You need to either
- update to a new version of PSE or
- download the DNG converter - use it to conver your NEF files to DNG files which can then be read by PSE 10.
DNG Converter 8.4
Windows: http://www.adobe.com/support/downloads/detail.jsp?ftpID=5739
MAC: http://www.adobe.com/support/downloads/detail.jsp?ftpID=5738
DNG Converter 8.3 (if running on XP or Vista)
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5694
Good luck
Brian

Device type does not support page format

Hi All,
There is one issue when I print a sapscript. I get an error message as follows:
Device type EPESCP9 does not support page format ZSG02
Could someone advise?
Thanks
Alice

Hi,
The page format ZSG02 is not present in Device type EPESCP9.
in SPAD t.code add the page format in that device type.
Better inform to BASIS people they will add page format in that device type.
Refer the link Device type does not support page format
Regards,
Dhina..

I uploaded an rtf (word) document to icloud, but when I try to open in Pages, I get a message that it does not support rtf format. What is going on?

I uploaded an rtf (word) document to icloud, but when I try to open in Pages, I get a message that it does not support rtf format. What is going on?

Supported file formats for iOS Pages
Import:
Pages ’09 for Mac
Microsoft Word - Office Open XML (.docx) and Office 97 or later (.doc)
Plain Text files (.txt)
Export:
Pages ’09 for Mac
Microsoft Word (.doc)
PDF
As you can see - .rtf is not supported.

Get-Item: Cannot find path ' ' because it does not exist. While running Powershell script.

I am trying to run a PowerShell script to upload files into a SharePoint site in an Azure environment...the script works fine on my local machine, but every time I run it in Azure (remotely), I get errors. Here is what my simple script looks like...
if ( (Get-PSSnapin -Name Microsoft.SharePoint.PowerShell -ErrorAction SilentlyContinue) -eq $null )
Write-Host "Loading Sharepoint Module "
[System.Reflection.Assembly]::LoadWithPartialName("Microsoft.SharePoint")
Add-PSSnapin -Name Microsoft.SharePoint.PowerShell
if ( (Get-PSSnapin -Name Microsoft.SharePoint.PowerShell) -eq $null )
Write-Host "Failed to load sharepoint snap-in. Could not proceed further, Aborting ..."
Exit
#Script settings
$webUrl = "http://sampleWebUrl"
$docLibraryName = "My Documents"
$docLibraryUrlName = "My%20Documents"
$localFolderPath = get-childitem "C:\Upload\Test Upload\My Documents\" -recurse
$contentType = "ContenttType1"
#Open web and library
$web = Get-SPWeb $webUrl
write-host "Web:" $web
$docLibrary = $web.Lists[$docLibraryName]
write-host "docLibrary:" $docLibrary
$files = ([System.IO.DirectoryInfo] (Get-Item $localFolderPath)).GetFiles()
write-host "files:" $files
If ($contentType = "ContenttType1")
#Open file
$fileStream = ([System.IO.FileInfo] (Get-Item $file.FullName)).OpenRead()
# Gather the file name
$FileName = $File.Name
#remove file extension
$NewName = [IO.Path]::GetFileNameWithoutExtension($FileName)
#split the file name by the "-" character
$FileNameArray = $NewName.split("_")
$check = $FileNameArray.Length
#Add file
$folder = $web.getfolder($docLibrary.rootFolder.URL)
write-host "Copying file " $file.Name " to " $folder.ServerRelativeUrl "..."
$spFile = $folder.Files.Add($folder.Url + "/" + $file.Name, [System.IO.Stream]$fileStream, $true)
$spItem = $spFile.Item
write-host "Success"
write-host "SP File:" $spFile
write-host "SP Item" $spItem
#populate columns
$spItem["Column1"] = $FileNameArray[0]
$spItem["Column2"] = $FileNameArray[1]
$spItem.Update()
$fileStream.Close();
Again, I can run this on my local machine and it works just fine, but when I attempt to run it on the Azure environment I get this error...
Get-Item : Cannot find path 'C:\powershellscripts\12653_B7045.PDF' because it does not exist.
At C:\PowerShellScripts\Upload-FilesIntoSharePointTester.ps1:32 char:42
+ $files = ([System.IO.DirectoryInfo] (Get-Item $localFolderPath)).GetFiles()
+ ~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : ObjectNotFound: (C:\powershellscripts\12653_B7045.PDF:String) [Get-Item], ItemNotFoundException
+ FullyQualifiedErrorId : PathNotFound,Microsoft.PowerShell.Commands.GetItemCommand
What strikes me first is the fact that the file its looking for is in the "C:\Upload\Test Upload\My Documents\" directory, but the error keeps saying "C:\powershellscripts\" which is where my script resides and not the files I want to
upload into SharePoint. When I step through the code, all the variables are holding the correct values. The $localFolderPath shows the name of files that I am attempting to upload, so it recognizes them. But once I step through this particular line of code,
the error occurs...
$files = ([System.IO.DirectoryInfo] (Get-Item $localFolderPath)).GetFiles()
Is this an error caused because I am remoting into the Azure environment? Has anyone dealt with this issue before? I would really appreciate the help. Thanks
Update: quick thing I noticed is that these two lines of code are returning null values. Again, is this handled differently in Azure or remotely? I ask cause this is the way I know how to do this, locally.
$docLibrary = $web.Lists[$docLibraryName]
$files = ([System.IO.DirectoryInfo] (Get-Item $localFolderPath)).GetFiles()

"...square brackets are wildcard characters in Windows PowerShell..."
When you use cd without a parameter it uses the -Path parameter. In this case you'll have to escape the square brackets so they are not considered wildcards. Each of the commands in the first example does the exact same thing.
cd 'Learn PowerShell `[Do Whatever`]'
cd -Path 'Learn PowerShell `[Do Whatever`]'
cd (or Set-Location) also has a literal path parameter (-LiteralPath) that does not require using an escape character (`) before each of the brackets. Hope this helps.
cd -LiteralPath 'Learn PowerShell [Do Whatever]'

Aperture does not support SONY's new DSLR A100!!!

Just bought a SONY's new DSLR A100 and found Aperture does not read the camera's RAW file ( *.arw ). Is there any solution for this or I can only wait until Apple issue a software update for this?

The "format" will undoubtedly be the same or very similar: where the numbers representing each pixel are stored within the file, and where the metadata is kept. But what differs is the mapping of the number values to (I'm simplifying here a bit) actual colours. Different camera models from the same manufacturer have different sensors, and these output on different scales.
What Apple (and others) have to do is work out the ratios required for a given camera model, to get the right colours. Whilst you could probably edit the properties file yourself to make Aperture and MacOS recognise the file format, you'd have to do some work to decide the correct numbers (in some cases, you can use others work - there was an explanation on this forum previously about using DCraw source to determine good starting values for an Olympus camera.)
The DSLR-A100 has a different sensor from the 5D. There's another 4MP for starters. (Actually, I just had a glance at the latest DCraw code, and it looks like the A100 raw file is treated differently from other KM and Sony cameras. So perhaps they have got a new format.)

My iphone has rejected outgoing emails with the message that the servers has rejected my email address because it does not support relay??

My iphone has rejected all outgoing emails with the message that the server has rejected my mail and psted it to my outbox because my email address does not support relay??

Go into Settings>Mail, Contacts, Calendars>your account>Outgoing mail ServerSMTP>Primary Server then turn Server ON and fill in both User Name + Password under Outgoing Mail Server.

Image cannot be rendered because Aperture does not support image format

Similar Messages

Maybe you are looking for